Abstract: Recently, there is a lot of interest in the field of under
water optical wireless communication for short range because of
its high bandwidth. But in most of the previous works line of
sight propagation or single scattering of photons only considered.
In practical case this is not applicable because of beam blockage in
underwater and multiple scattering also occurred during the photons
propagation through water. In this paper we consider a non-line
of sight underwater wireless optical communication system with
multiple scattering and examine the performance of the system using
monte carlo simulation. The distribution scattering angle of photons
are modeled by Henyey-Greenstein method. The average bit error
rate is calculated using on-off keying modulation for different water
types.
Abstract: Egg yolk oil is a natural source of bioactive
compounds such as unsaturated fatty acids, oil soluble vitamins,
pigments and others. Bioactive compound content in egg yolk oil
depends from its content in eggs, from which oil was extracted. Many
studies show that bioactive compound content in egg is correlated to
the content of these compounds in hen feed, but there is also an
opinion that hen housing systems also have influence on egg
chemical content. The aim of this study was to determine which
factor, laying hen housing system or hen diet, has a primary influence
on bioactive compound content in egg yolk oil. The egg yolk oil was
extracted from eggs obtained from 4 different hen housing systems:
cage, barn and two groups of free range. All hens were fed with
commercially produced compound feed except one group of free
range hens which get free diet – pastured hens. Extracted egg yolk
oils were analyzed for fatty acids, oil soluble vitamins and β-carotene
content. α-tocopherol, ergocalcipherol and polyunsaturated fatty acid
content in egg yolk oil was higher from eggs obtained from all
housing systems where hens were fed with commercial compound
feed. β-carotene and retinol content in egg yolk oils from free range
free diet eggs was significantly (p>0.05) higher that from other eggs
because hens have access to green forage. Hen physical activity in
free range housing systems decreases content of some bioactive
compound in egg yolk oil.
Abstract: Image compression based on fractal coding is a lossy
compression method and normally used for gray level images range
and domain blocks in rectangular shape. Fractal based digital image
compression technique provide a large compression ratio and in this
paper, it is proposed using YUV colour space and the fractal theory
which is based on iterated transformation. Fractal geometry is mainly
applied in the current study towards colour image compression
coding. These colour images possesses correlations among the colour
components and hence high compression ratio can be achieved by
exploiting all these redundancies. The proposed method utilises the
self-similarity in the colour image as well as the cross-correlations
between them. Experimental results show that the greater
compression ratio can be achieved with large domain blocks but more
trade off in image quality is good to acceptable at less than 1 bit per
pixel.
Abstract: Behavioral aspects of experience such as will power
are rarely subjected to quantitative study owing to the numerous
complexities involved. Will is a phenomenon that has puzzled
humanity for a long time. It is a belief that will power of an individual
affects the success achieved by them in life. It is also thought that a
person endowed with great will power can overcome even the most
crippling setbacks in life while a person with a weak will cannot make
the most of life even the greatest assets. This study is an attempt
to subject the phenomena of will to the test of an artificial neural
network through a computational model. The claim being tested is
that will power of an individual largely determines success achieved
in life. It is proposed that data pertaining to success of individuals
be obtained from an experiment and the phenomenon of will be
incorporated into the model, through data generated recursively using
a relation between will and success characteristic to the model.
An artificial neural network trained using part of the data, could
subsequently be used to make predictions regarding data points in
the rest of the model. The procedure would be tried for different
models and the model where the networks predictions are found to
be in greatest agreement with the data would be selected; and used
for studying the relation between success and will.
Abstract: Present paper describes method of obtaining clay
ceramic foam (CCF) and foam concrete (FC), by direct foaming with
high speed mixer-disperser (HSMD). Three foaming agents (FA) are
compared for the FC and CCF production: SCHÄUMUNGSMITTEL
W 53 FLÜSSIG (Zschimmer & Schwarz Gmbh, Germany), SCF-
1245 (Sika, test sample, Latvia) and FAB-12 (Elade, Latvija). CCF
were obtained at 950, 1000°C, 1150°C and 1150°C firing temperature
and have mechanical compressive strength 1.2, 2.55 and 4.3 MPa and
porosity 79.4, 75.1, 71.6%, respectively. Obtained FC has 6-14 MPa
compressive strength and porosity 44-55%. The goal of this work
was development of a sustainable and durable ceramic cellular
structures using HSMD.
Abstract: The research of juice flavor forecasting has become
more important in China. Due to the fast economic growth in China,
many different kinds of juices have been introduced to the market. If a
beverage company can understand their customers’ preference well,
the juice can be served more attractive. Thus, this study intends to
introducing the basic theory and computing process of grapes juice
flavor forecasting based on support vector regression (SVR). Applying
SVR, BPN, and LR to forecast the flavor of grapes juice in real data
shows that SVR is more suitable and effective at predicting
performance.
Abstract: Breast cancer is considered as a substantial health
concern and practicing mammography screening [MS] is important in
minimizing its related morbidity. So it is essential to have a better
understanding of breast cancer screening behaviors of women and
factors that influence utilization of them. The aim of this study is to
identify the factors that are linked to MS behaviors among the
Egyptian women. A cross-sectional descriptive design was carried
out to provide a snapshot of the factors that are linked to MS
behaviors. A convenience sample of 311 women was utilized and all
eligible participants admitted to the Women Imaging Unit who are 40
years of age or above, coming for mammography assessment, not
pregnant or breast feeding and who accepted to participate in the
study were included. A structured questionnaire was developed by
the researchers and contains three parts; Socio-demographic data;
Motivating factors associated with MS; and association between MS
and model of behavior change. The analyzed data indicated that most
of the participated women (66.6%) belonged to the age group of 40-
49.A high proportion of participants (58.1%) of group having
previous MS influenced by their neighbors to practice MS, whereas
32.7 % in group not having previous MS were influenced by family
members which indicated significant differences (P
Abstract: This paper proposes techniques like MT CMOS,
POWER GATING, DUAL STACK, GALEOR and LECTOR to
reduce the leakage power. A Full Adder has been designed using
these techniques and power dissipation is calculated and is compared
with general CMOS logic of Full Adder.
Simulation results show the validity of the proposed techniques is
effective to save power dissipation and to increase the speed of
operation of the circuits to a large extent.
Abstract: The exponential growth of social media arouses much
attention on public opinion information. The online forums, blogs,
micro blogs are proving to be extremely valuable resources and are
having bulk volume of information. However, most of the social
media data is unstructured and semi structured form. So that it is
more difficult to decipher automatically. Therefore, it is very much
essential to understand and analyze those data for making a right
decision. The online forums hotspot detection is a promising research
field in the web mining and it guides to motivate the user to take right
decision in right time. The proposed system consist of a novel
approach to detect a hotspot forum for any given time period. It uses
aging theory to find the hot terms and E-K-means for detecting the
hotspot forum. Experimental results demonstrate that the proposed
approach outperforms k-means for detecting the hotspot forums with
the improved accuracy.
Abstract: High pressure turbine (HPT) blades of DV – 2 jet
engines are made from Ni – based superalloy. This alloy was
originally manufactured in the Soviet Union and referred as ŽS6K.
For improving alloy’s high temperature resistance are blades coated
with Al – Si diffusion layer. A regular operation temperature of HPT
blades vary from 705°C to 750°C depending on jet engine regime.
An overcrossing working temperature range causes degradation of
the protective coating as well as base material which microstructure
is formed by the gamma matrix and strengthening phase gamma
prime (forming small particles in the microstructure). Diffusion
processes inside the material during exposition of the material to high
temperatures causes mainly coarsening of the gamma prime particles,
thus decreasing its strengthening effect. Degradation of the Al – Si
coating caused its thickness growth. All the microstructure changes
and coating layer thickness growth results in decreasing of the turbine
blade operation lifetime.
Abstract: This paper is part of a study to develop robots for
farming. As such power requirement to operate equipment attach to
such robots become an important factor. Soil-tool interaction plays
major role in power consumption, thus predicting accurately the
forces which act on the blade during the farming is very important for
optimal designing of farm equipment. In this paper, a finite element
investigation for tillage tools and soil interaction is described by
using an inelastic constitutive material law for agriculture
application. A 3-dimensional (3D) nonlinear finite element analysis
(FEA) is developed to examine behavior of a blade with different
rake angles moving in a block of soil, and to estimate the blade force.
The soil model considered is an elastic-plastic with non-associated
Drucker-Prager material model. Special use of contact elements are
employed to consider connection between soil-blade and soil-soil
surfaces. The FEA results are compared with experimental ones,
which show good agreement in accurately predicting draft forces
developed on the blade when it moves through the soil. Also a very
good correlation was obtained between FEA results and analytical
results from classical soil mechanics theories for straight blades.
These comparisons verified the FEA model developed. For analyzing
complicated soil-tool interactions and for optimum design of blades,
this method will be useful.
Abstract: One of the crucial parameters of digital cryptographic
systems is the selection of the keys used and their distribution. The
randomness of the keys has a strong impact on the system’s security
strength being difficult to be predicted, guessed, reproduced, or
discovered by a cryptanalyst. Therefore, adequate key randomness
generation is still sought for the benefit of stronger cryptosystems.
This paper suggests an algorithm designed to generate and test
pseudo random number sequences intended for cryptographic
applications. This algorithm is based on mathematically manipulating
a publically agreed upon information between sender and receiver
over a public channel. This information is used as a seed for
performing some mathematical functions in order to generate a
sequence of pseudorandom numbers that will be used for
encryption/decryption purposes. This manipulation involves
permutations and substitutions that fulfill Shannon’s principle of
“confusion and diffusion”. ASCII code characters were utilized in the
generation process instead of using bit strings initially, which adds
more flexibility in testing different seed values. Finally, the obtained
results would indicate sound difficulty of guessing keys by attackers.
Abstract: The objective of present research paper is to highlight
the importance of measuring advertisement effectiveness in print
media and to develop a conceptual model for advertisement
effectiveness. The developed model is based on dimensions on which
advertisement effectiveness depends and on the dimensions which are
used to measure the effectiveness. An in-depth and extensive
literature review is carried out to understand the concept of
advertisement effectiveness and its various determinants in context of
print media. Based on the insights gained, a conceptual framework
for advertisement effectiveness is presented. The model is an attempt
to uncover the relatively less explored area of advertisement
effectiveness in Indian advertising scenario. It is believed that present
work will encourage scholars and academicians to further explore the
area and will offer conceptual assistance and a fresh direction in the
domain of advertisement effectiveness.
Abstract: Proposed paper dealt with the modelling and analysis of induction motor based on the mathematical expression using the graphical programming environment of Laboratory Virtual Instrument Engineering Workbench (LabVIEW). Induction motor modelling with the mathematical expression enables the motor to be simulated with the various required parameters. Owing to the invention of variable speed drives study about the induction motor characteristics became complex. In this simulation motor internal parameter such as stator resistance and reactance, rotor resistance and reactance, phase voltage, frequency and losses will be given as input. By varying the speed of motor corresponding parameters can be obtained they are input power, output power, efficiency, torque induced, slip and current.
Abstract: A total of 115 yeast strains isolated from local cassava
processing wastes were measured for crude protein content. Among
these strains, the strain MSY-2 possessed the highest protein
concentration (>3.5 mg protein/mL). By using molecular
identification tools, it was identified to be a strain of Pichia
kudriavzevii based on similarity of D1/D2 domain of 26S rDNA
region. In this study, to optimize the protein production by MSY-2
strain, Response Surface Methodology (RSM) was applied. The
tested parameters were the carbon content, nitrogen content, and
incubation time. Here, the value of regression coefficient (R2) =
0.7194 could be explained by the model which is high to support the
significance of the model. Under the optimal condition, the protein
content was produced up to 3.77 g per L of the culture and MSY-2
strain contains 66.8 g protein per 100 g of cell dry weight. These
results revealed the plausibility of applying the novel strain of yeast
in single-cell protein production.
Abstract: Non contact evaluation of the thickness of paint
coatings can be attempted by different destructive and nondestructive
methods such as cross-section microscopy, gravimetric mass
measurement, magnetic gauges, Eddy current, ultrasound or
terahertz. Infrared thermography is a nondestructive and non-invasive
method that can be envisaged as a useful tool to measure the surface
thickness variations by analyzing the temperature response. In this
paper, the thermal quadrupole method for two layered samples heated
up with a pulsed excitation is firstly used. By analyzing the thermal
responses as a function of thermal properties and thicknesses of both
layers, optimal parameters for the excitation source can be identified.
Simulations show that a pulsed excitation with duration of ten
milliseconds allows obtaining a substrate-independent thermal
response. Based on this result, an experimental setup consisting of a
near-infrared laser diode and an Infrared camera was next used to
evaluate the variation of paint coating thickness between 60 μm and
130 μm on two samples. Results show that the parameters extracted
for thermal images are correlated with the estimated thicknesses by
the Eddy current methods. The laser pulsed thermography is thus an
interesting alternative nondestructive method that can be moreover
used for nonconductive substrates.
Abstract: Turkish migrants constitute the largest group among
people with migration background living in Germany. Turkish
women’s labor market participation is of significant importance for
their social and economic integration to the German society. This
paper thus aims to investigate their labor market positions. Turkish
migrant women participate less in the labor market compared to men,
and are responsible for most of the housework, child care, and elderly
care. This is due to their traditional roles in the family, educational
level, insufficient knowledge of German language, and insufficient
professional experience. We strongly recommend that wide-reaching
integration policies for women are formulated, so as to encourage
participation of not only migrant women but also their husbands,
fathers and/or brothers, and natives.
Abstract: Rainfall runoff models play important role in
hydrological predictions. However, the model is only one part of the
process for creation of flood prediction. The aim of this paper is to
show the process of successful prediction for flood event (May 15 –
May 18 2014). Prediction was performed by rainfall runoff model
HEC–HMS, one of the models computed within Floreon+ system.
The paper briefly evaluates the results of automatic hydrologic
prediction on the river Olše catchment and its gages Český Těšín and
Věřňovice.
Abstract: The first part of the paper analyzes the dynamics of
the total fertility rate both at the national and regional level, pointing
out the regional disparities in the distribution of this indicator. At the
same time, we also focus on the collapse of the number of live births,
on the changes in the fertility rate by birth rank, as well as on the
failure of acquiring the desired number of children. The second part
of the study centres upon a survey applied to urban families with 3
and more than 3 offspring. The preliminary analysis highlights the
fact that an increased fertility (more than 3rd rank) is triggered by the
parents’ above the average material condition and superior education.
The current situation of Romania, which is still passing through a
period of relatively rapid demographic changes, marked by numerous
convulsions, requires a new approach, in compliance with the recent
interpretations appropriate to a new post-transitional demographic
regime.
Abstract: The paper presents a method for a simple and
immediate motion planning of a SCARA robot, whose end-effector
has to move along a given trajectory; the calculation procedure
requires the user to define in analytical form or by points the
trajectory to be followed and to assign the curvilinear abscissa as
function of the time. On the basis of the geometrical characteristics
of the robot, a specifically developed program determines the motion
laws of the actuators that enable the robot to generate the required
movement; this software can be used in all industrial applications for
which a SCARA robot has to be frequently reprogrammed, in order
to generate various types of trajectories with different motion times.