Using of Cavitation Disperser, for Porous Ceramic and Concrete Material Preparation
Present paper describes method of obtaining clay
ceramic foam (CCF) and foam concrete (FC), by direct foaming with
high speed mixer-disperser (HSMD). Three foaming agents (FA) are
compared for the FC and CCF production: SCHÄUMUNGSMITTEL
W 53 FLÜSSIG (Zschimmer & Schwarz Gmbh, Germany), SCF-
1245 (Sika, test sample, Latvia) and FAB-12 (Elade, Latvija). CCF
were obtained at 950, 1000°C, 1150°C and 1150°C firing temperature
and have mechanical compressive strength 1.2, 2.55 and 4.3 MPa and
porosity 79.4, 75.1, 71.6%, respectively. Obtained FC has 6-14 MPa
compressive strength and porosity 44-55%. The goal of this work
was development of a sustainable and durable ceramic cellular
structures using HSMD.
[1] G. Stephani and M. Scheffler, “Cellular Materials - CELLMAT 2012,”
2012. (Online). Available: http://www.conventus.de/cellmat/.
[2] A. Shishkin, V. Mironovs, V. Zemchenkov, and I. Hussainova,
“Alumina-silica hollow microspheres in metallo-ceramic matrix
composite.,” in Proc. CellMAT 2014, 2014, p. CD.
[3] E. Prud’homme, P. Michaud, E. Joussein, C. Peyratout, a. Smith, and S.
Rossignol, “In situ inorganic foams prepared from various clays at low
temperature,” Appl. Clay Sci., vol. 51, no. 1–2, pp. 15–22, Jan. 2011.
[4] E. Prud’homme, P. Michaud, E. Joussein, C. Peyratout, A. Smith, S.
Arrii-Clacens, J. M. Clacens, and S. Rossignol, “Silica fume as porogent
agent in geo-materials at low temperature,” J. Eur. Ceram. Soc., vol. 30,
no. 7, pp. 1641–1648, May 2010.
[5] M. S. Cilla, M. R. Morelli, and P. Colombo, “Open cell geopolymer
foams by a novel saponification/peroxide/gelcasting combined route,” J.
Eur. Ceram. Soc., vol. 34, no. 12, pp. 3133–3137, Oct. 2014.
[6] R. L. Menchavez and L.-A. S. Intong, “Red clay-based porous ceramic
with pores created by yeast-based foaming technique,” J. Mater. Sci.,
vol. 45, no. 23, pp. 6511–6520, Jul. 2010.
[7] A. Polykov and E. Polykova, “Mixser-Disperser,”
DE202007014913.12007.
[8] A. Polykov and E. Polykova, “Dispergators-maisītājs,” 13592 B2007.
[9] A. Polykov, V. Mironovs, A. Shishkin, and J. Baronins, “Preparation of
Coal-Water Slurries Using a High – Speed Mixer – Disperser,” in Proc.
4th International Scientific Conference Civil Engineering’ 13, 2013, pp.
77–81.
[10] RĪGAS_ŪDENS, “Riga Municipal Service Water Quality,” 2015.
(Online). Available: https://www.rigasudens.lv/water-quality/en/.
(Accessed: 02-Feb-2015).
[11] M. Takahashi, K. Adachi, R. L. Menchavez, and M. Fuji, “Fabrication
of semi-conductive ceramics by combination of gelcasting and reduction
sintering,” J. Mater. Sci., vol. 41, no. 7, pp. 1965–1972, 2006.
[12] Korjakins, A., Upeniece, L., Bajāre, D. Obtaining efficiency porous
ceramics with controlling size of porosity. Advanced Materials
Research, 2014, 925, pp. 464-468
[13] Justs, J., Wyrzykowski, M., Winnefeld, F., Bajare, D., Lura, P. Influence
of superabsorbent polymers on hydration of cement pastes with low
water-to-binder ratio: A calorimetry study Journal of Thermal Analysis
and Calorimetry, January 2014, Volume 115, Issue 1, pp 425-432
[1] G. Stephani and M. Scheffler, “Cellular Materials - CELLMAT 2012,”
2012. (Online). Available: http://www.conventus.de/cellmat/.
[2] A. Shishkin, V. Mironovs, V. Zemchenkov, and I. Hussainova,
“Alumina-silica hollow microspheres in metallo-ceramic matrix
composite.,” in Proc. CellMAT 2014, 2014, p. CD.
[3] E. Prud’homme, P. Michaud, E. Joussein, C. Peyratout, a. Smith, and S.
Rossignol, “In situ inorganic foams prepared from various clays at low
temperature,” Appl. Clay Sci., vol. 51, no. 1–2, pp. 15–22, Jan. 2011.
[4] E. Prud’homme, P. Michaud, E. Joussein, C. Peyratout, A. Smith, S.
Arrii-Clacens, J. M. Clacens, and S. Rossignol, “Silica fume as porogent
agent in geo-materials at low temperature,” J. Eur. Ceram. Soc., vol. 30,
no. 7, pp. 1641–1648, May 2010.
[5] M. S. Cilla, M. R. Morelli, and P. Colombo, “Open cell geopolymer
foams by a novel saponification/peroxide/gelcasting combined route,” J.
Eur. Ceram. Soc., vol. 34, no. 12, pp. 3133–3137, Oct. 2014.
[6] R. L. Menchavez and L.-A. S. Intong, “Red clay-based porous ceramic
with pores created by yeast-based foaming technique,” J. Mater. Sci.,
vol. 45, no. 23, pp. 6511–6520, Jul. 2010.
[7] A. Polykov and E. Polykova, “Mixser-Disperser,”
DE202007014913.12007.
[8] A. Polykov and E. Polykova, “Dispergators-maisītājs,” 13592 B2007.
[9] A. Polykov, V. Mironovs, A. Shishkin, and J. Baronins, “Preparation of
Coal-Water Slurries Using a High – Speed Mixer – Disperser,” in Proc.
4th International Scientific Conference Civil Engineering’ 13, 2013, pp.
77–81.
[10] RĪGAS_ŪDENS, “Riga Municipal Service Water Quality,” 2015.
(Online). Available: https://www.rigasudens.lv/water-quality/en/.
(Accessed: 02-Feb-2015).
[11] M. Takahashi, K. Adachi, R. L. Menchavez, and M. Fuji, “Fabrication
of semi-conductive ceramics by combination of gelcasting and reduction
sintering,” J. Mater. Sci., vol. 41, no. 7, pp. 1965–1972, 2006.
[12] Korjakins, A., Upeniece, L., Bajāre, D. Obtaining efficiency porous
ceramics with controlling size of porosity. Advanced Materials
Research, 2014, 925, pp. 464-468
[13] Justs, J., Wyrzykowski, M., Winnefeld, F., Bajare, D., Lura, P. Influence
of superabsorbent polymers on hydration of cement pastes with low
water-to-binder ratio: A calorimetry study Journal of Thermal Analysis
and Calorimetry, January 2014, Volume 115, Issue 1, pp 425-432
@article{"International Journal of Earth, Energy and Environmental Sciences:69888", author = "A. Shishkin and A. Korjakins and V. Mironovs", title = "Using of Cavitation Disperser, for Porous Ceramic and Concrete Material Preparation", abstract = "Present paper describes method of obtaining clay
ceramic foam (CCF) and foam concrete (FC), by direct foaming with
high speed mixer-disperser (HSMD). Three foaming agents (FA) are
compared for the FC and CCF production: SCHÄUMUNGSMITTEL
W 53 FLÜSSIG (Zschimmer & Schwarz Gmbh, Germany), SCF-
1245 (Sika, test sample, Latvia) and FAB-12 (Elade, Latvija). CCF
were obtained at 950, 1000°C, 1150°C and 1150°C firing temperature
and have mechanical compressive strength 1.2, 2.55 and 4.3 MPa and
porosity 79.4, 75.1, 71.6%, respectively. Obtained FC has 6-14 MPa
compressive strength and porosity 44-55%. The goal of this work
was development of a sustainable and durable ceramic cellular
structures using HSMD.
", keywords = "Ceramic foam, foam concrete, clay foam, open cell,
close cell, direct foaming.", volume = "9", number = "5", pages = "532-4", }
