Abstract: Wireless location is to determine the mobile station (MS) location in a wireless cellular communications system. When fewer base stations (BSs) may be available for location purposes or the measurements with large errors in non-line-of-sight (NLOS) environments, it is necessary to integrate all available heterogeneous measurements to achieve high location accuracy. This paper illustrates a hybrid proposed schemes that combine time of arrival (TOA) at three BSs and angle of arrival (AOA) information at the serving BS to give a location estimate of the MS. The proposed schemes mitigate the NLOS effect simply by the weighted sum of the intersections between three TOA circles and the AOA line without requiring a priori information about the NLOS error. Simulation results show that the proposed methods can achieve better accuracy when compare with Taylor series algorithm (TSA) and the hybrid lines of position algorithm (HLOP).
Abstract: Majority of researches conducted on Iranian urban
development plans indicate that they have been almost unsuccessful
in terms of draft, execution and goal achievement. Lack or shortage
of essential statistics and information can be listed as an important
reason of the failure of these plans. Lack of figures and information
has turned into an obvious part of the country-s statistics officials.
This problem has made urban planner themselves to embark on
physical surveys including real estate and land pricing, population
and economic census of the city. Apart from the problems facing
urban developers, the possibility of errors is high in such surveys.
In the present article, applying the interview technique, it has
been mentioned that utilizing multipurpose cadastre system as a land
information system is essential for urban development plans in Iran.
It can minimize or even remove the failures facing urban
development plans.
Abstract: Testing is an activity that is required both in the
development and maintenance of the software development life cycle
in which Integration Testing is an important activity. Integration
testing is based on the specification and functionality of the software
and thus could be called black-box testing technique. The purpose of
integration testing is testing integration between software
components. In function or system testing, the concern is with overall
behavior and whether the software meets its functional specifications
or performance characteristics or how well the software and
hardware work together. This explains the importance and necessity
of IT for which the emphasis is on interactions between modules and
their interfaces. Software errors should be discovered early during
IT to reduce the costs of correction. This paper introduces a new type
of integration error, presenting an overview of Integration Testing
techniques with comparison of each technique and also identifying
which technique detects what type of error.
Abstract: Due to the high percentage of induction motors in industrial market, there exist a large opportunity for energy savings. Replacement of working induction motors with more efficient ones can be an important resource for energy savings. A calculation of energy savings and payback periods, as a result of such a replacement, based on nameplate motor efficiency or manufacture-s data can lead to large errors [1]. Efficiency of induction motors (IMs) can be extracted using some procedures that use the no-load test results. In the cases that we must estimate the efficiency on-line, some of these procedures can-t be efficient. In some cases the efficiency estimates using the rating values of the motor, but these procedures can have errors due to the different working condition of the motor. In this paper the efficiency of an IM estimated by using the genetic algorithm. The results are compared with the measured values of the torque and power. The results show smaller errors for this procedure compared with the conventional classical procedures, hence the cost of the equipments is reduced and on-line estimation of the efficiency can be made.
Abstract: As known, the guard wires of overhead high voltage
are usually grounded through the grounding systems of support and
of the terminal stations. They do affect the zero sequence impedance
value of the line, Z0, which is generally, calculated assuming that the
wires guard are at ground potential. In this way it is not considered
the effect of the resistances of earth of supports and stations. In this
work is formed a formula for the calculation of Z0 which takes
account of said resistances. Is also proposed a method of calculating
the impedance zero sequence overhead lines in which, in various
sections or spans, the guard wires are connected to the supports, or
isolated from them, or are absent. Parametric analysis is given for
lines 220 kV and 400 kV, which shows the extent of the errors made
with traditional methods of calculation.
Abstract: A special case of floating point data representation is block
floating point format where a block of operands are forced to have a joint
exponent term. This paper deals with the finite wordlength properties of
this data format. The theoretical errors associated with the error model for
block floating point quantization process is investigated with the help of error
distribution functions. A fast and easy approximation formula for calculating
signal-to-noise ratio in quantization to block floating point format is derived.
This representation is found to be a useful compromise between fixed point
and floating point format due to its acceptable numerical error properties over
a wide dynamic range.
Abstract: In this paper, a fiber based Fabry-Perot interferometer
is proposed and demonstrated for a non-contact displacement
measurement. A piece of micro-prism which attached to the
mechanical vibrator is served as the target reflector. Interference
signal is generated from the superposition between the sensing beam
and the reference beam within the sensing arm of the fiber sensor.
This signal is then converted to the displacement value by using a
developed program written in visual Cµ programming with a
resolution of λ/8. A classical function generator is operated for
controlling the vibrator. By fixing an excitation frequency of 100 Hz
and varying the excitation amplitude range of 0.1 – 3 Volts, the
output displacements measured by the fiber sensor are obtained from
1.55 μm to 30.225 μm. A reference displacement sensor with a
sensitivity of ~0.4 μm is also employed for comparing the
displacement errors between both sensors. We found that over the
entire displacement range, a maximum and average measurement
error are obtained of 0.977% and 0.44% respectively.
Abstract: This paper presents a review of an 8-year study on radiation effects in commercial memory devices operating within the main on-board computer system OBC386 of the Algerian microsatellite Alsat-1. A statistical analysis of single-event upset (SEU) and multiple-bit upset (MBU) activity in these commercial memories shows that the typical SEU rate at alsat-1's orbit is 4.04 × 10-7 SEU/bit/day, where 98.6% of these SEUs cause single-bit errors, 1.22% cause double-byte errors, and the remaining SEUs result in multiple-bit and severe errors.
Abstract: Wide applicability of concurrent programming
practices in developing various software applications leads to
different concurrency errors amongst which data race is the most
important. Java provides greatest support for concurrent
programming by introducing various concurrency packages. Aspect
oriented programming (AOP) is modern programming paradigm
facilitating the runtime interception of events of interest and can be
effectively used to handle the concurrency problems. AspectJ being
an aspect oriented extension to java facilitates the application of
concepts of AOP for data race detection. Volatile variables are
usually considered thread safe, but they can become the possible
candidates of data races if non-atomic operations are performed
concurrently upon them. Various data race detection algorithms have
been proposed in the past but this issue of volatility and atomicity is
still unaddressed. The aim of this research is to propose some
suggestions for incorporating certain conditions for data race
detection in java programs at the volatile fields by taking into account
support for atomicity in java concurrency packages and making use
of pointcuts. Two simple test programs will demonstrate the results
of research. The results are verified on two different Java
Development Kits (JDKs) for the purpose of comparison.
Abstract: Data rate, tolerable bit error rate or frame error rate
and range & coverage are the key performance requirement of a
communication link. In this paper performance of MFSK link is
analyzed in terms of bit error rate, number of errors and total number
of data processed. In the communication link model proposed, which
is implemented using MATLAB block set, an improvement in BER
is observed. Different parameters which effects and enables to keep
BER low in M-ary communication system are also identified.
Abstract: This study has investigated a vehicle Lumped
Parameter Model (LPM) in frontal crash. There are several ways for
determining spring and damper characteristics and type of problem
shall be considered as system identification. This study use Genetic
Algorithm (GA) procedure, being an effective procedure in case of
optimization issues, for optimizing errors, between target data
(experimental data) and calculated results (being obtained by
analytical solving). In this study analyzed model in 5-DOF then
compared our results with 5-DOF serial model. Finally, the response
of model due to external excitement is investigated.
Abstract: In this paper, the Gaussian type quadrature rules for fuzzy functions are discussed. The errors representation and convergence theorems are given. Moreover, four kinds of Gaussian type quadrature rules with error terms for approximate of fuzzy integrals are presented. The present paper complements the theoretical results of the paper by T. Allahviranloo and M. Otadi [T. Allahviranloo, M. Otadi, Gaussian quadratures for approximate of fuzzy integrals, Applied Mathematics and Computation 170 (2005) 874-885]. The obtained results are illustrated by solving some numerical examples.
Abstract: In this paper an approaches for increasing the
effectiveness of error detection in computer network channels with
Pulse-Amplitude Modulation (PAM) has been proposed. Proposed
approaches are based on consideration of special feature of errors,
which are appearances in line with PAM. The first approach consists
of CRC modification specifically for line with PAM. The second
approach is base of weighted checksums using. The way for
checksum components coding has been developed. It has been shown
that proposed checksum modification ensure superior digital data
control transformation reliability for channels with PAM in compare
to CRC.
Abstract: Three dimensional analysis of thermal model in laser
full penetration welding, Nd:YAG, by transparent mode DP600 alloy
steel 1.25mm of thickness and gap of 0.1mm. Three models studied
the influence of thermal dependent temperature properties, thermal
independent temperature and the effect of peak value of specific heat
at phase transformation temperature, AC1, on the transient
temperature. Another seven models studied the influence of
discretization, meshes on the temperature distribution in weld plate.
It is shown that for the effects of thermal properties, the errors less
4% of maximum temperature in FZ and HAZ have identified. The
minimum value of discretization are at least one third increment per
radius for temporal discretization and the spatial discretization
requires two elements per radius and four elements through thickness
of the assembled plate, which therefore represent the minimum
requirements of modeling for the laser welding in order to get
minimum errors less than 5% compared to the fine mesh.
Abstract: The capturing of gel electrophoresis image represents
the output of a DNA computing algorithm. Before this image is being
captured, DNA computing involves parallel overlap assembly (POA)
and polymerase chain reaction (PCR) that is the main of this
computing algorithm. However, the design of the DNA
oligonucleotides to represent a problem is quite complicated and is
prone to errors. In order to reduce these errors during the design stage
before the actual in-vitro experiment is carried out; a simulation
software capable of simulating the POA and PCR processes is
developed. This simulation software capability is unlimited where
problem of any size and complexity can be simulated, thus saving
cost due to possible errors during the design process. Information
regarding the DNA sequence during the computing process as well as
the computing output can be extracted at the same time using the
simulation software.
Abstract: This paper presents the application of a signal
intensity independent registration criterion for 2D rigid body
registration of medical images using 1D binary projections. The
criterion is defined as the weighted ratio of two projections. The ratio
is computed on a pixel per pixel basis and weighting is performed by
setting the ratios between one and zero pixels to a standard high
value. The mean squared value of the weighted ratio is computed
over the union of the one areas of the two projections and it is
minimized using the Chebyshev polynomial approximation using
n=5 points. The sum of x and y projections is used for translational
adjustment and a 45deg projection for rotational adjustment. 20 T1-
T2 registration experiments were performed and gave mean errors
1.19deg and 1.78 pixels. The method is suitable for contour/surface
matching. Further research is necessary to determine the robustness
of the method with regards to threshold, shape and missing data.
Abstract: The design problem of Infinite Impulse Response (IIR)
digital filters is usually expressed as the minimization problem of
the complex magnitude error that includes both the magnitude and
phase information. However, the group delay of the filter obtained
by solving such design problem may be far from the desired group
delay. In this paper, we propose a design method of stable IIR digital
filters with prespecified maximum group delay errors. In the proposed
method, the approximation problems of the magnitude-phase and
group delay are separately defined, and these two approximation
problems are alternately solved using successive projections. As a
result, the proposed method can design the IIR filters that satisfy the
prespecified allowable errors for not only the complex magnitude but
also the group delay by alternately executing the coefficient update
for the magnitude-phase and the group delay approximation. The
usefulness of the proposed method is verified through some examples.
Abstract: Fractional delay FIR filters design method based on
the differential evolution algorithm is presented. Differential evolution
is an evolutionary algorithm for solving a global optimization problems in the continuous search space. In the proposed approach,
an evolutionary algorithm is used to determine the coefficients of
a fractional delay FIR filter based on the Farrow structure. Basic
differential evolution is enhanced with a restricted mating technique,
which improves the algorithm performance in terms of convergence
speed and obtained solution. Evolutionary optimization is carried out by minimizing an objective function which is based on the amplitude
response and phase delay errors. Experimental results show that the proposed algorithm leads to a reduction in the amplitude response and phase delay errors relative to those achieved with the Least-Squares
method.
Abstract: Artifact free photoplethysmographic (PPG) signals are
necessary for non-invasive estimation of oxygen saturation (SpO2) in
arterial blood. Movement of a patient corrupts the PPGs with motion
artifacts, resulting in large errors in the computation of Sp02. This
paper presents a study on using Kalman Filter in an innovative way
by modeling both the Artillery Blood Pressure (ABP) and the
unwanted signal, additive motion artifact, to reduce motion artifacts
from corrupted PPG signals. Simulation results show acceptable
performance regarding LMS and variable step LMS, thus
establishing the efficacy of the proposed method.
Abstract: Specification-based testing enables us to detect errors
in the implementation of functions defined in given specifications.
Its effectiveness in achieving high path coverage and efficiency in
generating test cases are always major concerns of testers. The automatic
test cases generation approach based on formal specifications
proposed by Liu and Nakajima is aimed at ensuring high effectiveness
and efficiency, but this approach has not been empirically assessed.
In this paper, we present an experiment for assessing Liu-s testing
approach. The result indicates that this testing approach may not be
effective in some circumstances. We discuss the result, analyse the
specific causes for the ineffectiveness, and describe some suggestions
for improvement.