Abstract: The direct implementation of interleaver functions
in WiMAX is not hardware efficient due to presence of complex
functions. Also the conventional method i.e. using memories for
storing the permutation tables is silicon consuming. This work
presents a 2-D transformation for WiMAX channel interleaver
functions which reduces the overall hardware complexity to
compute the interleaver addresses on the fly. A fully reconfigurable
architecture for address generation in WiMAX
channel interleaver is presented, which consume 1.1 k-gates in
total. It can be configured for any block size and any modulation
scheme in WiMAX. The presented architecture can run at a
frequency of 200 MHz, thus fully supporting high bandwidth
requirements for WiMAX.
Abstract: Saudi Arabia in recent years has seen drastic increase
in traffic related crashes. With population of over 29 million, Saudi
Arabia is considered as a fast growing and emerging economy. The
rapid population increase and economic growth has resulted in rapid
expansion of transportation infrastructure, which has led to increase
in road crashes. Saudi Ministry of Interior reported more than 7,000
people killed and 68,000 injured in 2011 ranking Saudi Arabia to be
one of the worst worldwide in traffic safety. The traffic safety issues
in the country also result in distress to road users and cause and
economic loss exceeding 3.7 billion Euros annually. Keeping this in
view, the researchers in Saudi Arabia are investigating ways to
improve traffic safety conditions in the country. This paper presents a
multilevel approach to collect traffic safety related data required to do
traffic safety studies in the region. Two highway corridors including
King Fahd Highway 39 kilometre and Gulf Cooperation Council
Highway 42 kilometre long connecting the cities of Dammam and
Khobar were selected as a study area. Traffic data collected included
traffic counts, crash data, travel time data, and speed data. The
collected data was analysed using geographic information system to
evaluate any correlation. Further research is needed to investigate the
effectiveness of traffic safety related data when collected in a
concerted effort.
Abstract: Dedicated Short Range Communication (DSRC) is a
key enabling technology for the next generation of
communication-based safety applications. One of the important
problems for DSRC deployment is maintaining high performance
under heavy channel load. Many studies focus on congestion control
mechanisms for simulating hundreds of physical radios deployed on
vehicles. The U.S. department of transportation-s (DOT) Intelligent
Transportation Systems (ITS) division has a plan to chosen prototype
on-board devices capable of transmitting basic “Here I am" safety
messages to other vehicles. The devices will be used in an IntelliDrive
safety pilot deployment of up to 3,000 vehicles. It is hard to log the
information of 3,000 vehicles. In this paper we present the designs and
issues related to the DSRC Radio Testbed under heavy channel load.
The details not only include the architecture of DSRC Radio Testbed,
but also describe how the Radio Interfere System is used to help for
emulating the congestion radio environment.
Abstract: Several models of vulnerability assessment have been proposed. The selection of one of these models depends on the objectives of the study. The classical methodologies for seismic vulnerability analysis, as a part of seismic risk analysis, have been formulated with statistical criteria based on a rapid observation. The information relating to the buildings performance is statistically elaborated. In this paper, we use the European Macroseismic Scale EMS-98 to define the relationship between damage and macroseismic intensity to assess the seismic vulnerability. Applying to Algiers area, the first step is to identify building typologies and to assign vulnerability classes. In the second step, damages are investigated according to EMS-98.
Abstract: Modern managements of water distribution system
(WDS) need water quality models that are able to accurately predict
the dynamics of water quality variations within the distribution system
environment. Before water quality models can be applied to solve
system problems, they should be calibrated. Although former
researchers use GA solver to calibrate relative parameters, it is
difficult to apply on the large-scale or medium-scale real system for
long computational time. In this paper a new method is designed
which combines both macro and detailed model to optimize the water
quality parameters. This new combinational algorithm uses radial
basis function (RBF) metamodeling as a surrogate to be optimized for
the purpose of decreasing the times of time-consuming water quality
simulation and can realize rapidly the calibration of pipe wall reaction
coefficients of chlorine model of large-scaled WDS. After two cases
study this method is testified to be more efficient and promising, and
deserve to generalize in the future.
Abstract: Development of motor car safety devices has reduced
fatality rates in car accidents. Yet despite this increase in car safety,
neck injuries resulting from rear impact collisions, particularly at low
speed, remain a primary concern. In this study, FEA(Finite Element
Analysis) of seat was performed to evaluate neck injuries in rear
impact. And the FEA result was verified by comparison with the actual
test results. The dummy used in FE model and actual test is BioRID II
which is regarded suitable for rear impact collision analysis. A
threshold of the BioRID II neck injury indicators was also proposed to
upgrade seat performance in order to reduce whiplash injury. To
optimize the seat for a low-speed rear impact collision, a method was
proposed, which is multi-objective optimization idea using DOE
(Design of Experiments) results.
Abstract: The pedagogy project has been proven as an active
learning method, which is used to develop learner-s skills and
knowledge.The use of technology in the learning world, has filed
several gaps in the implementation of teaching methods, and online
evaluation of learners. However, the project methodology presents
challenges in the assessment of learners online.
Indeed, interoperability between E-learning platforms (LMS) is
one of the major challenges of project-based learning assessment.
Firstly, we have reviewed the characteristics of online assessment
in the context of project-based teaching. We addressed the
constraints encountered during the peer evaluation process.
Our approach is to propose a meta-model, which will describe a
language dedicated to the conception of peer assessment scenario in
project-based learning. Then we illustrate our proposal by an
instantiation of the meta-model through a business process in a
scenario of collaborative assessment on line.
Abstract: This research explores the links between physical
development and transportation infrastructure around Kumasi,
Ghana. It utilizes census data as well as fieldwork and interviews
carried out during July and December 2005. The results suggest that
there is a weak association between transportation investments and
physical development, and that recent housing has generally occurred
in poorly accessible locations. Road investments have generally
followed physical expansion rather than the reverse. Hence policies
designed to manage the fast growth now occurring around Ghanaian
cities should not focus exclusively on improving transportation
infrastructure but also strengthening the underlying the traditional
land management structures and the official land administrative
institutions that operate within those structures.
Abstract: The struggle between modern and postmodern
understanding is also displayed in terms of the superiorities of
quantitative and qualitative methods to each other which are
evaluated within the scope of these understandings. By way of
assuming that the quantitative researches (modern) are able to
account for structure while the qualitative researches (postmodern)
explain the process, these methods are turned into a means for
worldviews specific to a period. In fact, process is not a functioning
independent of structure. In addition to this issue, the ability of
quantitative methods to provide scientific knowledge is also
controversial so long as they exclude the dialectical method. For this
reason, the critiques charged against modernism in terms of
quantitative methods are, in a sense, legitimate. Nevertheless, the
main issue is in which parameters postmodernist critique tries to
legitimize its critiques and whether these parameters represent a point
of view enabling democratic solutions.
In this respect, the scientific knowledge covered in Turkish media
as a means through which ordinary people have access to scientific
knowledge will be evaluated by means of content analysis within a
new objectivity conception.
Abstract: Adhesion to the human intestinal cell is considered
as one of the main selection criteria of lactic acid bacteria for
probiotic use. The adhesion ability of two Bifidobacteriums strains
Bifidobacterium longum BB536 and Bifidobacterium
psudocatenulatum G4 was done using HT-29 human epithelium
cell line as in vitro study. Four different level of pH were used 5.6,
5.7, 6.6, and 6.8 with four different times 15, 30, 60, and 120 min.
Adhesion was quantified by counting the adhering bacteria after
Gram staining. The adhesion of B. longum BB536 was higher than
B. psudocatenulatum G4. Both species showed significant
different in the adhesion properties at the factors tested. The
highest adhesion for both Bifidobacterium was observed at 120
min and the low adhesion was in 15 min. The findings of this
study will contribute to the introduction of new effective probiotic
strain for future utilization.
Abstract: In this paper we present a new multichannel high
voltage driver box to connect up to six MOEMS mirror devices to it that have resonant and also quasistatically driven actuating electrodes. It is possible to drive all resonant axes synchronously
while the amplitude of them can individually be controlled by separate microcontrollers that also operate the quasistatic axes.
Circuit simulations are compared with the measurements done on the
real system and also show the robust driving performance of a
MOEMS mirror.
Abstract: This paper aims at identifying and analyzing the
knowledge transmission channels in textile and clothing clusters
located in Brazil and in Europe. Primary data was obtained through
interviews with key individuals. The collection of primary data was
carried out based on a questionnaire with ten categories of indicators
of knowledge transmission. Secondary data was also collected
through a literature review and through international organizations
sites. Similarities related to the use of the main transmission channels
of knowledge are observed in all cases. The main similarities are:
influence of suppliers of machinery, equipment and raw materials;
imitation of products and best practices; training promoted by
technical institutions and businesses; and cluster companies being
open to acquire new knowledge. The main differences lie in the
relationship between companies, where in Europe the intensity of this
relationship is bigger when compared to Brazil. The differences also
occur in importance and frequency of the relationship with the
government, with the cultural environment, and with the activities of
research and development. It is also found factors that reduce the
importance of geographical proximity in transmission of knowledge,
and in generating trust and the establishment of collaborative
behavior.
Abstract: Disordered function of maniphalanx and difficulty with
ambulation will occur insofar as a human has a failure in the spinal
marrow. Cervical spondylotic myelopathy as one of the myelopathy
emanates from not only external factors but also increased age. In
addition, the diacrisis is difficult since cervical spondylotic
myelopathy is evaluated by a doctor-s neurological remark and
imaging findings. As a quantitative method for measuring the degree
of disability, hand-operated triangle step test (for short, TST) has
formulated. In this research, a full automatic triangle step counter
apparatus is designed and developed to measure the degree of
disability in an accurate fashion according to the principle of TST. The
step counter apparatus whose shape is a low triangle pole displays the
number of stepping upon each corner. Furthermore, the apparatus has
two modes of operation. Namely, one is for measuring the degree of
disability and the other for rehabilitation exercise. In terms of
usefulness, clinical practice should be executed before too long.
Abstract: Deaths from cardiovascular diseases have decreased substantially over the past two decades, largely as a result of advances in acute care and cardiac surgery. These developments have produced a growing population of patients who have survived a myocardial infarction. These patients need to be continuously monitored so that the initiation of treatment can be given within the crucial golden hour. The available conventional methods of monitoring mostly perform offline analysis and restrict the mobility of these patients within a hospital or room. Hence the aim of this paper is to design a Portable Cardiac Telemedicine System to aid the patients to regain their independence and return to an active work schedule, there by improving the psychological well being. The portable telemedicine system consists of a Wearable ECG Transmitter (WET) and a slightly modified mobile phone, which has an inbuilt ECG analyzer. The WET is placed on the body of the patient that continuously acquires the ECG signals from the high-risk cardiac patients who can move around anywhere. This WET transmits the ECG to the patient-s Bluetooth enabled mobile phone using blue tooth technology. The ECG analyzer inbuilt in the mobile phone continuously analyzes the heartbeats derived from the received ECG signals. In case of any panic condition, the mobile phone alerts the patients care taker by an SMS and initiates the transmission of a sample ECG signal to the doctor, via the mobile network.
Abstract: This paper includes a review of three physics simulation packages that can be used to provide researchers with a virtual ground for modeling, implementing and simulating complex models, as well as testing their control methods with less cost and time of development. The inverted pendulum model was used as a test bed for comparing ODE, DANCE and Webots, while Linear State Feedback was used to control its behavior. The packages were compared with respect to model creation, solving systems of differential equation, data storage, setting system variables, control the experiment and ease of use. The purpose of this paper is to give an overview about our experience with these environments and to demonstrate some of the benefits and drawbacks involved in practice for each package.
Abstract: The ElectroEncephaloGram (EEG) is useful for
clinical diagnosis and biomedical research. EEG signals often
contain strong ElectroOculoGram (EOG) artifacts produced
by eye movements and eye blinks especially in EEG recorded
from frontal channels. These artifacts obscure the underlying
brain activity, making its visual or automated inspection
difficult. The goal of ocular artifact removal is to remove
ocular artifacts from the recorded EEG, leaving the underlying
background signals due to brain activity. In recent times,
Independent Component Analysis (ICA) algorithms have
demonstrated superior potential in obtaining the least
dependent source components. In this paper, the independent
components are obtained by using the JADE algorithm (best
separating algorithm) and are classified into either artifact
component or neural component. Neural Network is used for
the classification of the obtained independent components.
Neural Network requires input features that exactly represent
the true character of the input signals so that the neural
network could classify the signals based on those key
characters that differentiate between various signals. In this
work, Auto Regressive (AR) coefficients are used as the input
features for classification. Two neural network approaches
are used to learn classification rules from EEG data. First, a
Polynomial Neural Network (PNN) trained by GMDH (Group
Method of Data Handling) algorithm is used and secondly,
feed-forward neural network classifier trained by a standard
back-propagation algorithm is used for classification and the
results show that JADE-FNN performs better than JADEPNN.
Abstract: This study aimed at developing visualization tools for integrating CloudSat images and Water Vapor Satellite images. KML was used for integrating data from CloudSat Satellite and GMS-6 Water Vapor Satellite. CloudSat 2D images were transformed into 3D polygons in order to achieve 3D images. Before overlaying the images on Google Earth, GMS-6 water vapor satellite images had to be rescaled into linear images. Web service was developed using webMathematica. Shoreline from GMS-6 images was compared with shoreline from LandSat images on Google Earth for evaluation. The results showed that shoreline from GMS-6 images was highly matched with the shoreline in LandSat images from Google Earth. For CloudSat images, the visualizations were compared with GMS-6 images on Google Earth. The results showed that CloudSat and GMS-6 images were highly correlated.
Abstract: The objective of our work is to develop a new approach for discovering knowledge from a large mass of data, the result of applying this approach will be an expert system that will serve as diagnostic tools of a phenomenon related to a huge information system. We first recall the general problem of learning Bayesian network structure from data and suggest a solution for optimizing the complexity by using organizational and optimization methods of data. Afterward we proposed a new heuristic of learning a Multi-Entities Bayesian Networks structures. We have applied our approach to biological facts concerning hereditary complex illnesses where the literatures in biology identify the responsible variables for those diseases. Finally we conclude on the limits arched by this work.
Abstract: Certifications such as the Passive House Standard aim to reduce the final space heating energy demand of residential buildings. Space conditioning, notably heating, is responsible for nearly 70% of final residential energy consumption in Europe. There is therefore significant scope for the reduction of energy consumption through improvements to the energy efficiency of residential buildings. However, these certifications totally overlook the energy embodied in the building materials used to achieve this greater operational energy efficiency. The large amount of insulation and the triple-glazed high efficiency windows require a significant amount of energy to manufacture. While some previous studies have assessed the life cycle energy demand of passive houses, including their embodied energy, these rely on incomplete assessment techniques which greatly underestimate embodied energy and can lead to misleading conclusions. This paper analyses the embodied and operational energy demands of a case study passive house using a comprehensive hybrid analysis technique to quantify embodied energy. Results show that the embodied energy is much more significant than previously thought. Also, compared to a standard house with the same geometry, structure, finishes and number of people, a passive house can use more energy over 80 years, mainly due to the additional materials required. Current building energy efficiency certifications should widen their system boundaries to include embodied energy in order to reduce the life cycle energy demand of residential buildings.
Abstract: The main purpose of this study is to provide a detailed
statistical overview of the time and regional distribution, relative
timing occurrence of economic crises and government changes in 51
economies over the 1990–2007 periods. At the same time, the
predictive power of the economic crises on set government changes
will be examined using “signal approach".
The result showed that the percentage of government changes is
highest in transition economies (86 percent of observations) and
lowest in Latin American economies (39 percent of observations).
The percentages of government changes are same in both developed
and developing countries (43 percent of observations). However,
average crises per year (frequency of crises) are higher (lower) in
developing (developed) countries than developed (developing)
countries. Also, the predictive power of economic crises about the
onset of a government change is highest in Transition economies (81
percent) and lowest in Latin American countries (30 percent). The
predictive power of economic crises in developing countries (43
percent) is lower than developed countries (55 percent).