Abstract: Nanowire arrays of copper with uniform diameters have
been synthesized by potentiostatic electrochemical metal deposition
(EMD) of copper sulphate and potassium chloride solution within
the nano-channels of porous Indium-Tin Oxide (ITO), also known as
Tin doped Indium Oxide templates. The nanowires developed were
fairly continuous with diameters ranging from 110-140 nm along
the entire length. Single as well as poly-crystalline copper wires
have been prepared by application of appropriate potential during the
EMD process. Scanning electron microscopy (SEM), high resolution
transmission electron microscopy (HRTEM), small angle electron
diffraction (SAED) and atomic force microscopy (AFM) were used
to characterize the synthesized nano wires at room temperature. The
electrochemical response of synthesized products was evaluated by
cyclic voltammetry while surface energy analysis was carried out
using a Goniometer.
Abstract: power-line networks are promise infrastructure for
broadband services provision to end users. However, the network
performance is affected by stochastic channel changing which is due
to load impedances, number of branches and branched line lengths. It
has been proposed that multi-carrier modulations techniques such as
orthogonal frequency division multiplexing (OFDM), Multi-Carrier
Spread Spectrum (MC-SS), wavelet OFDM can be used in such
environment. This paper investigates the performance of different
indoor topologies of power-line networks that uses MC-SS
modulation scheme.It is observed that when a branch is added in the
link between sending and receiving end of an indoor channel an
average of 2.5dB power loss is found. In additional, when the branch
is added at a node an average of 1dB power loss is found.
Additionally when the terminal impedances of the branch change
from line characteristic impedance to impedance either higher or
lower values the channel performances were tremendously improved.
For example changing terminal load from characteristic impedance
(85 .) to 5 . the signal to noise ratio (SNR) required to attain the
same performances were decreased from 37dB to 24dB respectively.
Also, changing the terminal load from channel characteristic
impedance (85 .) to very higher impedance (1600 .) the SNR
required to maintain the same performances were decreased from
37dB to 23dB. The result concludes that MC-SS performs better
compared with OFDM techniques in all aspects and especially when
the channel is terminated in either higher or lower impedances.
Abstract: In this paper, the effect of transmission codes on the
performance of coherent square M-ary quadrature amplitude
modulation (CSMQAM) under hybrid selection/maximal-ratio
combining (H-S/MRC) diversity is analysed. The fading channels are
modeled as frequency non-selective slow independent and identically
distributed Rayleigh fading channels corrupted by additive white
Gaussian noise (AWGN). The results for coded MQAM are
computed numerically for the case of (24,12) extended Golay code
and compared with uncoded MQAM under H-S/MRC diversity by
plotting error probabilities versus average signal to noise ratio (SNR)
for various values L and N in order to examine the improvement in
the performance of the digital communications system as the number
of selected diversity branches is increased. The results for no
diversity, conventional SC and Lth order MRC schemes are also
plotted for comparison. Closed form analytical results derived in this
paper are sufficiently simple and therefore can be computed
numerically without any approximations. The analytical results
presented in this paper are expected to provide useful information
needed for design and analysis of digital communication systems
over wireless fading channels.
Abstract: We propose photo-BJMOSFET (Bipolar Junction Metal-Oxide-Semiconductor Field Effect Transistor) fabricated on SOI film. ITO film is adopted in the device as gate electrode to reduce light absorption. I-V characteristics of photo-BJMOSFET obtained in dark (dark current) and under 570nm illumination (photo current) are studied furthermore to achieve high photo-to-dark-current contrast ratio. Two variables in the calculation were the channel length and the thickness of the film which were set equal to six different values, i.e., L=2, 4, 6, 8, 10, and 12μm and three different values, i.e., dsi =100, 200 and 300nm, respectively. The results indicate that the greatest photo-to-dark-current contrast ratio is achieved with L=10μm and dsi=200 nm at VGK=0.6V.
Abstract: Time interleaved sigma-delta (TIΣΔ) architecture is a
potential candidate for high bandwidth analog to digital converters
(ADC) which remains a bottleneck for software and cognitive radio
receivers. However, the performance of the TIΣΔ architecture is
limited by the unavoidable gain and offset mismatches resulting
from the manufacturing process. This paper presents a novel digital
calibration method to compensate the gain and offset mismatch
effect. The proposed method takes advantage of the reconstruction
digital signal processing on each channel and requires only few logic
components for implementation. The run time calibration is estimated
to 10 and 15 clock cycles for offset cancellation and gain mismatch
calibration respectively.
Abstract: Organizational communication is an administrative
function crucial especially for executives in the implementation of
organizational and administrative functions. Executives spend a
significant part of their time on communicative activities. Doing his or her daily routine, arranging meeting schedules, speaking on the telephone, reading or replying to business correspondence, or
fulfilling the control functions within the organization, an executive typically engages in communication processes.
Efficient communication is the principal device for the adequate implementation of administrative and organizational activities. For
this purpose, management needs to specify the kind of
communication system to be set up and the kind of communication
devices to be used. Communication is vital for any organization.
In conventional offices, communication takes place within the hierarchical pyramid called the organizational structure, and is known as formal or informal communication. Formal communication
is the type that works in specified structures within the organizational rules and towards the organizational goals. Informal communication, on the other hand, is the unofficial type taking place among staff as
face-to-face or telephone interaction.
Communication in virtual as well as conventional offices is
essential for obtaining the right information in administrative
activities and decision-making. Virtual communication technologies
increase the efficiency of communication especially in virtual teams.
Group communication is strengthened through an inter-group central
channel. Further, ease of information transmission makes it possible
to reach the information at the source, allowing efficient and correct decisions. Virtual offices can present as a whole the elements of information which conventional offices produce in different
environments.
At present, virtual work has become a reality with its pros and
cons, and will probably spread very rapidly in coming years, in line
with the growth in information technologies.
Abstract: In this paper we propose a method for modeling the
correlation between the received signals by two or more antennas
operating in a multipath environment. Considering the maximum
excess delay in the channel being modeled, an elliptical region
surrounding both transmitter and receiver antennas is produced. A
number of scatterers are randomly distributed in this region and
scatter the incoming waves. The amplitude and phase of incoming
waves are computed and used to obtain statistical properties of the
received signals. This model has the distinguishable advantage of
being applicable for any configuration of antennas. Furthermore the
common PDF (Probability Distribution Function) of received wave
amplitudes for any pair of antennas can be calculated and used to
produce statistical parameters of received signals.
Abstract: This paper describes a blind algorithm for estimating a time varying and frequency selective fading channel. In order to identify blindly the impulse response of these channels, we have used Higher Order Statistics (HOS) to build our algorithm. In this paper, we have selected two theoretical frequency selective channels as the Proakis-s 'B' channel and the Macchi-s channel, and one practical frequency selective fading channel called Broadband Radio Access Network (BRAN A). The simulation results in noisy environment and for different data input channel, demonstrate that the proposed method could estimate the phase and magnitude of these channels blindly and without any information about the input, except that the input excitation is i.i.d (Identically and Independent Distributed) and non-Gaussian.
Abstract: This paper proposes two novel schemes for pilot-aided
integer frequency offset (IFO) estimation in orthogonal frequency
division multiplexing (OFDM)-based digital video broadcastingterrestrial
(DVB-T) systems. The conventional scheme proposed for
estimating the IFO uses only partial information of combinations
that pilots can provide, which stems from a rigorous assumption
that the channel responses of pilots used for estimating the IFO
change very rapidly. Thus, in this paper, we propose the novel IFO
estimation schemes exploiting all information of combinations that
pilots can provide to improve the performance of IFO estimation.
The simulation results show that the proposed schemes are highly
accurate in terms of the IFO detection probability.
Abstract: Mathematical and computational modeling of calcium
signalling in nerve cells has produced considerable insights into how
the cells contracts with other cells under the variation of biophysical
and physiological parameters. The modeling of calcium signaling in
astrocytes has become more sophisticated. The modeling effort has
provided insight to understand the cell contraction. Main objective
of this work is to study the effect of voltage gated (Operated)
calcium channel (VOC) on calcium profile in the form of advection
diffusion equation. A mathematical model is developed in the form
of advection diffusion equation for the calcium profile. The model
incorporates the important physiological parameter like diffusion
coefficient etc. Appropriate boundary conditions have been framed.
Finite volume method is employed to solve the problem. A program
has been developed using in MATLAB 7.5 for the entire problem
and simulated on an AMD-Turion 32-bite machine to compute the
numerical results.
Abstract: This study investigated the effect of cross sectional
geometry on sediment transport rate. The processes of sediment
transport are generally associated to environmental management,
such as pollution caused by the forming of suspended sediment in the
channel network of a watershed and preserving physical habitats and
native vegetations, and engineering applications, such as the
influence of sediment transport on hydraulic structures and flood
control design. Many equations have been proposed for computing
the sediment transport, the influence of many variables on sediment
transport has been understood; however, the effect of other variables
still requires further research. For open channel flow, sediment
transport capacity is recognized to be a function of friction slope,
flow velocity, grain size, grain roughness and form roughness, the
hydraulic radius of the bed section and the type and quantity of
vegetation cover. The effect of cross sectional geometry of the
channel on sediment transport is one of the variables that need
additional investigation. The width-depth ratio (W/d) is a
comparative indicator of the channel shape. The width is the total
distance across the channel and the depth is the mean depth of the
channel. The mean depth is best calculated as total cross-sectional
area divided by the top width. Channels with high W/d ratios tend to
be shallow and wide, while channels with low (W/d) ratios tend to be
narrow and deep. In this study, the effects of the width-depth ratio on
sediment transport was demonstrated theoretically by inserting the
shape factor in sediment continuity equation and analytically by
utilizing the field data sets for Yalobusha River. It was found by
utilizing the two approaches as a width-depth ratio increases the
sediment transport decreases.
Abstract: This paper proposes a vertical beamforming concept
to a cellular network employing Fractional Frequency Reuse
technique including with cell sectorization. Two different beams are
utilized in cell-center and cell-edge, separately. The proposed concept
is validated through computer simulation in term of SINR and
channel capacity. Also, comparison when utilizing horizontal and
vertical beam formation is in focus. The obtained results indicate
that the proposed concept can improve the performance of the
cellular networks comparing with the one using horizontal
beamforming.
Abstract: A stack with a small critical temperature gradient is
desirable for a standing wave thermoacoustic engine to obtain a low
onset temperature difference (the minimum temperature difference to
start engine-s self-oscillation). The viscous and heat relaxation loss in
the stack determines the critical temperature gradient. In this work, a
dimensionless critical temperature gradient factor is obtained based
on the linear thermoacoustic theory. It is indicated that the
impedance determines the proportion between the viscous loss, heat
relaxation losses and the power production from the heat energy. It
reveals the effects of the channel dimensions, geometrical
configuration and the local acoustic impedance on the critical
temperature gradient in stacks. The numerical analysis shows that
there exists a possible optimum combination of these parameters
which leads to the lowest critical temperature gradient. Furthermore,
several different geometries have been tested and compared
numerically.
Abstract: In this paper, a simple heuristic genetic algorithm is
used for Multistage Multiuser detection in fast fading environments.
Multipath channels, multiple access interference (MAI) and near far
effect cause the performance of the conventional detector to degrade.
Heuristic Genetic algorithms, a rapidly growing area of artificial
intelligence, uses evolutionary programming for initial search, which
not only helps to converge the solution towards near optimal
performance efficiently but also at a very low complexity as
compared with optimal detector. This holds true for Additive White
Gaussian Noise (AWGN) and multipath fading channels.
Experimental results are presented to show the superior performance
of the proposed techque over the existing methods.
Abstract: In this paper the features of multiple material gate
silicon-on-insulator MOSFETs are presented and compared with
single material gate silicon-on-insulator MOSFET structures. The
results indicate that the multiple material gate structures reduce short
channel effects such as drain induce barrier lowering, hot electron
effect and better current characteristics in comparison with single
material structures
Abstract: In this paper the development of a software to
encrypt messages with asymmetric cryptography is presented. In
particular, is used the RSA (Rivest, Shamir and Adleman) algorithm
to encrypt alphanumeric information. The software allows to
generate different public keys from two prime numbers provided by
the user, the user must then select a public-key to generate the
corresponding private-key. To encrypt the information, the user must
provide the public-key of the recipient as well as the message to be
encrypted. The generated ciphertext can be sent through an insecure
channel, so that would be very difficult to be interpreted by an
intruder or attacker. At the end of the communication, the recipient
can decrypt the original message if provide his/her public-key and
his/her corresponding private-key.
Abstract: The paper shows some ability to manage two-phase
flows arising from the use of unsteady effects. In one case, we
consider the condition of fragmentation of the interface between the
two components leads to the intensification of mixing. The problem
is solved when the temporal and linear scale are small for the
appearance of the developed mixing layer. Showing that exist such
conditions for unsteady flow velocity at the surface of the channel,
which will lead to the creation and fragmentation of vortices at Re
numbers of order unity. Also showing that the Re is not a criterion of
similarity for this type of flows, but we can introduce a criterion that
depends on both the Re, and the frequency splitting of the vortices. It
turned out that feature of this situation is that streamlines behave
stable, and if we analyze the behavior of the interface between the
components it satisfies all the properties of unstable flows. The other
problem we consider the behavior of solid impurities in the extensive
system of channels. Simulated unsteady periodic flow modeled
breaths. Consider the behavior of the particles along the trajectories.
It is shown that, depending on the mass and diameter of the particles,
they can be collected in a caustic on the channel walls, stop in a
certain place or fly back. Of interest is the distribution of particle
velocity in frequency. It turned out that by choosing a behavior of the
velocity field of the carrier gas can affect the trajectory of individual
particles including force them to fly back.
Abstract: Wireless sensor networks (WSNs) have gained
tremendous attention in recent years due to their numerous
applications. Due to the limited energy resource, energy efficient
operation of sensor nodes is a key issue in wireless sensor networks.
Cooperative caching which ensures sharing of data among various
nodes reduces the number of communications over the wireless
channels and thus enhances the overall lifetime of a wireless sensor
network. In this paper, we propose a cooperative caching scheme
called ZCS (Zone Cooperation at Sensors) for wireless sensor
networks. In ZCS scheme, one-hop neighbors of a sensor node form a
cooperative cache zone and share the cached data with each other.
Simulation experiments show that the ZCS caching scheme achieves
significant improvements in byte hit ratio and average query latency
in comparison with other caching strategies.
Abstract: In this paper, we have proposed a novel FinFET with
extended body under the poly gate, which is called EB-FinFET, and
its characteristic is demonstrated by using three-dimensional (3-D)
numerical simulation. We have analyzed and compared it with
conventional FinFET. The extended body height dependence on the
drain induced barrier lowering (DIBL) and subthreshold swing (S.S)
have been also investigated. According to the 3-D numerical
simulation, the proposed structure has a firm structure, an acceptable
short channel effect (SCE), a reduced series resistance, an increased
on state drain current (I
on) and a large normalized I
DS. Furthermore,
the structure can also improve corner effect and reduce self-heating
effect due to the extended body. Our results show that the EBFinFET
is excellent for nanoscale device.
Abstract: Encrypted messages sending frequently draws the attention
of third parties, perhaps causing attempts to break and
reveal the original messages. Steganography is introduced to hide
the existence of the communication by concealing a secret message
in an appropriate carrier like text, image, audio or video. Quantum
steganography where the sender (Alice) embeds her steganographic
information into the cover and sends it to the receiver (Bob) over a
communication channel. Alice and Bob share an algorithm and hide
quantum information in the cover. An eavesdropper (Eve) without
access to the algorithm can-t find out the existence of the quantum
message. In this paper, a text quantum steganography technique based
on the use of indefinite articles (a) or (an) in conjunction with the nonspecific
or non-particular nouns in English language and quantum
gate truth table have been proposed. The authors also introduced a
new code representation technique (SSCE - Secret Steganography
Code for Embedding) at both ends in order to achieve high level of
security. Before the embedding operation each character of the secret
message has been converted to SSCE Value and then embeds to cover
text. Finally stego text is formed and transmits to the receiver side.
At the receiver side different reverse operation has been carried out
to get back the original information.