Abstract: This paper deals with the status of solid waste pollution in touristic spots of North coastal Andhra Pradesh. Case studies of Eco tourism, cultural tourism and pilgrim tourism are elaborately discussed and the study is based on both primary and secondary data. Data collection includes field collection of solid waste, semi structured interviews and observation of tourists. Results indicate generation of 72% Non biodegradable material in Eco touristic places like RK beach Visakhapatnam, Araku Valley. Pydithalli Jathra is a famous cultural touristic attraction and more than one lakh people converge here. The solid waste at this spot includes 20% coconut shells, 50% plastic bottles and covers, 20% Banana peelings and remaining are food materials. Radhasapthami is the most important festival celebrated at famous sun temple Arasavalli of Srikakulam. Here solid waste includes 50% water bottles, plastic covers, 10% papers, 10% hair, 30% left out food material and Banana peelings.
Abstract: Time interleaved sigma-delta (TIΣΔ) architecture is a
potential candidate for high bandwidth analog to digital converters
(ADC) which remains a bottleneck for software and cognitive radio
receivers. However, the performance of the TIΣΔ architecture is
limited by the unavoidable gain and offset mismatches resulting
from the manufacturing process. This paper presents a novel digital
calibration method to compensate the gain and offset mismatch
effect. The proposed method takes advantage of the reconstruction
digital signal processing on each channel and requires only few logic
components for implementation. The run time calibration is estimated
to 10 and 15 clock cycles for offset cancellation and gain mismatch
calibration respectively.
Abstract: LSP routing is among the prominent issues in MPLS
networks traffic engineering. The objective of this routing is to
increase number of the accepted requests while guaranteeing the
quality of service (QoS). Requested bandwidth is the most important
QoS criterion that is considered in literatures, and a various number
of heuristic algorithms have been presented with that regards. Many
of these algorithms prevent flows through bottlenecks of the network
in order to perform load balancing, which impedes optimum
operation of the network. Here, a modern routing algorithm is
proposed as MIRAD: having a little information of the network
topology, links residual bandwidth, and any knowledge of the
prospective requests it provides every request with a maximum
bandwidth as well as minimum end-to-end delay via uniform load
distribution across the network. Simulation results of the proposed
algorithm show a better efficiency in comparison with similar
algorithms.
Abstract: The paper presents new results of a recent industry
supported research and development study in which an efficient
framework for evaluating practical and meaningful power system
reliability and quality indices was applied. The system-wide
integrated performance indices are capable of addressing and
revealing areas of deficiencies and bottlenecks as well as
redundancies in the composite generation-transmission-demand
structure of large-scale power grids. The technique utilizes a linear
programming formulation, which simulates practical operating
actions and offers a general and comprehensive framework to assess
the harmony and compatibility of generation, transmission and
demand in a power system. Practical applications to a reduced
system model as well as a portion of the Saudi power grid are also
presented in the paper for demonstration purposes.
Abstract: In this paper, multi-processors job shop scheduling problems are solved by a heuristic algorithm based on the hybrid of priority dispatching rules according to an ant colony optimization algorithm. The objective function is to minimize the makespan, i.e. total completion time, in which a simultanous presence of various kinds of ferons is allowed. By using the suitable hybrid of priority dispatching rules, the process of finding the best solution will be improved. Ant colony optimization algorithm, not only promote the ability of this proposed algorithm, but also decreases the total working time because of decreasing in setup times and modifying the working production line. Thus, the similar work has the same production lines. Other advantage of this algorithm is that the similar machines (not the same) can be considered. So, these machines are able to process a job with different processing and setup times. According to this capability and from this algorithm evaluation point of view, a number of test problems are solved and the associated results are analyzed. The results show a significant decrease in throughput time. It also shows that, this algorithm is able to recognize the bottleneck machine and to schedule jobs in an efficient way.
Abstract: Simulation model is an easy way to build up models
to represent real life scenarios, to identify bottlenecks and to enhance
system performance. Using a valid simulation model may give
several advantages in creating better manufacturing design in order to
improve the system performances. This paper presents result of
implementing a simulation model to design hard disk drive
manufacturing process by applying line balancing to improve both
productivity and quality of hard disk drive process. The line balance
efficiency showed 86% decrease in work in process, output was
increased by an average of 80%, average time in the system was
decreased 86% and waiting time was decreased 90%.
Abstract: The aim of current research was to investigate ASLT method suitability for accelerated beer shelf-life determination. The research was accomplished on popular Latvian beer: light filtrated and unfiltered pasteurized beer with alcohol content 5.2%; dark filtrated pasteurized beer with alcohol content 4.2% with shelf-life five months. Bottled in dark glass bottles beer samples were storage during 20 weeks at several temperature regimes: +10±1 °C, +20±1 °C, +30±1 °C, +40±1 °C. Samples quality parameters as physically-chemical and microbiological was tested every two weeks using standard methods. It is possible to determine beer shelf-life rapidly during storage at +30±1 °C for filtered pasteurized light beer by 2.5 times, unfiltered pasteurized light beer by 1.4 times and for filtered pasteurized dark beer by 1.7 times. During preset experiments it was proved, that it is possible to determine beer shelf-life rapidly using ASLT method if beer storage temperature could be increased by +10±1 °C.
Abstract: The latest Geographic Information System (GIS)
technology makes it possible to administer the spatial components of
daily “business object," in the corporate database, and apply suitable
geographic analysis efficiently in a desktop-focused application. We
can use wireless internet technology for transfer process in spatial
data from server to client or vice versa. However, the problem in
wireless Internet is system bottlenecks that can make the process of
transferring data not efficient. The reason is large amount of spatial
data. Optimization in the process of transferring and retrieving data,
however, is an essential issue that must be considered. Appropriate
decision to choose between R-tree and Quadtree spatial data indexing
method can optimize the process. With the rapid proliferation of
these databases in the past decade, extensive research has been
conducted on the design of efficient data structures to enable fast
spatial searching. Commercial database vendors like Oracle have also
started implementing these spatial indexing to cater to the large and
diverse GIS. This paper focuses on the decisions to choose R-tree
and quadtree spatial indexing using Oracle spatial database in mobile
GIS application. From our research condition, the result of using
Quadtree and R-tree spatial data indexing method in one single
spatial database can save the time until 42.5%.
Abstract: Bottle water is getting very popular all through the
world; especially in the gulf countries as the main source of drinking
water. However, concerns over leaching of toxic chemicals are
increasing. In this study, a health risk assessment was conducted in
accordance with the guidelines indicated by United States
Environmental Protection Agency (USEPA). It is conducted based on
leaching of Diethyl Phthalate (DEP) from Polyethylene terephthalate
(PET). The toxicity and exposure assessment of diethyl phthalate was
conducted to characterize its risk on human health. Risk management
is also discussed.
Abstract: This is the first report from India on a beverage resulting from alcoholic fermentation of the juice of sea buckthorn (Hippophae rhamnoides L) using lab isolated yeast strain. The health promoting potential of the product was evaluated based on its total phenolic content. The most important finding was that under the present fermentation condition, the total phenolic content of the wine product was 689 mg GAE/L. Investigation of influence of bottle ageing on the sea buckthorn wine showed a slight decrease in the phenolic content (534 m mg GAE/L). This study also includes the comparative analysis of the phenolic content of wines from other selected fruit juices like grape, apple and black currant. KeywordsAlcoholic fermentation, Hippophae, Total phenolic content, Wine
Abstract: Bacterial magnetic nanoparticles have great useful potential in biotechnological and biomedical applications. In this study, a liquid growth medium was modified for cultivation a fastidious magnetotactic bacterium that has been isolated from Anzali
lagoon, Iran in our previous research. These modifications include
change in vitamin, mineral, carbon sources and etcetera. In our
experience, the serum bottles and designed air-tight laboratory bottles
were used to create microaerobic conditions in order to development
of a method for scale-up experiment. This information may serve as a
guide to green chemistry based biological protocols for the synthesis
of magnetic nanoparticles with control over the chemical
composition, morphology and size.
Abstract: Legionella pneumophila is involved in more than 95%
cases of severe atypical pneumonia. Infection is mainly by
inhalation the indoor aerosols through the water-coolant systems.
Because some Legionella strains may be viable but not culturable,
therefore, Taq polymerase, DNA amplification and semi-nested-PCR
were carried out to detect Legionella-specific 16S-rDNA sequence.
For this purpose, 1.5 litter of water samples from 77 water-coolant
system were collected from four different hospitals, two nursing
homes and one student hostel in Kerman city of Iran, each in a brand
new plastic bottle during summer season of 2006 (from April to
August). The samples were filtered in the sterile condition through
the Millipore Membrane Filter. DNA was extracted from membrane
and used for PCR to detect Legionella spp. The PCR product was
then subjected to semi-nested PCR for detection of L. pneumophila.
Out of 77 water samples that were tested by PCR, 30 (39%) were
positive for most species of Legionella. However, L. pneumophila
was detected from 14 (18.2%) water samples by semi-nested PCR.
From the above results it can be concluded that water coolant
systems of different hospitals and nursing homes in Kerman city of
Iran are highly contaminated with L. pneumophila spp. and pose
serious concern. So, we recommend avoiding such type of coolant
system in the hospitals and nursing homes.
Abstract: Optical 3D measurement of objects is meaningful in
numerous industrial applications. In various cases shape acquisition
of weak textured objects is essential. Examples are repetition parts
made of plastic or ceramic such as housing parts or ceramic bottles as
well as agricultural products like tubers. These parts are often
conveyed in a wobbling way during the automated optical inspection.
Thus, conventional 3D shape acquisition methods like laser scanning
might fail. In this paper, a novel approach for acquiring 3D shape of
weak textured and moving objects is presented. To facilitate such
measurements an active stereo vision system with structured light is
proposed. The system consists of multiple camera pairs and auxiliary
laser pattern generators. It performs the shape acquisition within one
shot and is beneficial for rapid inspection tasks. An experimental
setup including hardware and software has been developed and
implemented.
Abstract: An experiment was conducted under controlled
conditions to study the effect of water extract of leaves, shoots and
roots of either Sisymbrium irio L. =SISIR and/or Descurainia
sophia (L.) Schur =DESSO on the germination and primary growth
of wheat. A split-split plot experiment in CRD with three
replications was used. The main plots were the type of weed: i.e.
SISIR and DESSO and the sub-plots were type of organ: i.e. leaf,
stem and root and, the sub-sub plots were concentration of the
water extract of each organ of the weeds: i.e. 0, 2, 4 and 8 % w/v.
The plant materials were cut in 2-3 cm pieces and then were
ground in a blender. The crushed materials were weighed
according to experimental protocol and the final volume was
reached to 100 ml in distilled water in dark bottles. All bottles were
put on a shaker for 24 hours. The solutions were filtered by muslin
cloth. Whatman paper, 9 cm in diameter, were put in petri dishes
and twenty seeds of wheat were put on it and 5 ml distilled water
or water extract of weeds were added to each petri dish. All petri
dishes were put in constant temperature of 15 0C incubator.
The results showed that the SISIR water extract had a greater
inhibitory effects on germination and primary growth of wheat
than those of DESSO water extract. The water extracts of the
leaves of both weeds had the greatest inhibitory effects on
germination and primary growth of wheat, compared to those of
stems and roots. Increasing the concentration of water extract of
leaves, stems and roots of both weeds up to 8 % caused the greatest
inhibitory effects to wheat and reduced the germination rate and
primary growth of it linearly.
Abstract: Object-oriented simulation is considered one of the most sophisticated techniques that has been widely used in planning, designing, executing and maintaining construction projects. This technique enables the modeler to focus on objects which is extremely important for thorough understanding of a system. Thus, identifying an object is an essential point of building a successful simulation model. In a maintenance process an object is a maintenance work order (MWO). This study demonstrates a maintenance simulation model for the building maintenance division of Saudi Consolidated Electric Company (SCECO) in Dammam, Saudi Arabia. The model focused on both types of maintenance processes namely: (1) preventive maintenance (PM) and (2) corrective maintenance (CM). It is apparent from the findings that object-oriented simulation is a good diagnostic and experimental tool. This is because problems, limitations, bottlenecks and so forth are easily identified. These features are very difficult to obtain when using other tools.
Abstract: The objective of this research was to determine the
potency of indigenous acid-aluminium tolerant Bradyrhizobium
japonicum as producer of indole acetic acid (IAA) and applied it as
nitrogen fixation on local soybeans viz Anjasmoro, Tanggamus
(yellow soybean seeds), and Detam (black soybean seed). Three
isolates of acid-aluminium tolerant Bradyrhizobium japonicum (BJ)
were used in this research, i.e. BJ 11 (wt), BJ 11 (19) - BJ 11(wt)
mutant, and USDA 110 as a reference isolate. All of isolates tested to
produce the IAA by using Salkowsky method. Effect of IAA
production by each of B. japonicum was tested on growth pouch and
greenhouse using three varieties of soybean. All isolates could grow
well and produce IAA on yeast mannitol broth (YMB) medium in
the presence of 0.5 mM L-tryptophan. BJ 11 (19) produced the
highest of IAA at 4 days incubation compared to BJ 11 (wt) and
USDA 110. All tested isolates of Bradyrhizobium japonicum have
showed effect on stimulating the formation of root nodules in
soybean varieties grown on Leonard bottle. The concentration of
IAA on root nodules of soybean symbiotic with B. japonicum was
significantly different with control, except on the treatment using
Tanggamus soybean.
Abstract: Recently, distributed generation technologies have received much attention for the potential energy savings and reliability assurances that might be achieved as a result of their widespread adoption. Fueling the attention have been the possibilities of international agreements to reduce greenhouse gas emissions, electricity sector restructuring, high power reliability requirements for certain activities, and concern about easing transmission and distribution capacity bottlenecks and congestion. So it is necessary that impact of these kinds of generators on distribution feeder reconfiguration would be investigated. This paper presents an approach for distribution reconfiguration considering Distributed Generators (DGs). The objective function is summation of electrical power losses A Tabu search optimization is used to solve the optimal operation problem. The approach is tested on a real distribution feeder.
Abstract: In this paper, a reliable cooperative multipath routing
algorithm is proposed for data forwarding in wireless sensor networks
(WSNs). In this algorithm, data packets are forwarded towards the
base station (BS) through a number of paths, using a set of relay
nodes. In addition, the Rayleigh fading model is used to calculate
the evaluation metric of links. Here, the quality of reliability is
guaranteed by selecting optimal relay set with which the probability
of correct packet reception at the BS will exceed a predefined
threshold. Therefore, the proposed scheme ensures reliable packet
transmission to the BS. Furthermore, in the proposed algorithm,
energy efficiency is achieved by energy balancing (i.e. minimizing
the energy consumption of the bottleneck node of the routing path)
at the same time. This work also demonstrates that the proposed
algorithm outperforms existing algorithms in extending longevity of
the network, with respect to the quality of reliability. Given this, the
obtained results make possible reliable path selection with minimum
energy consumption in real time.
Abstract: In the urban traffic network, the intersections are the
“bottleneck point" of road network capacity. And the arterials are the
main body in road network and the key factor which guarantees the
normal operation of the city-s social and economic activities. The
rapid increase in vehicles leads to seriously traffic jam and cause the
increment of vehicles- delay. Most cities of our country are
traditional single control system, which cannot meet the need for the
city traffic any longer. In this paper, Synchro6.0 as a platform to
minimize the intersection delay, optimizesingle signal cycle and split
for Zhonghua Street in Handan City. Meanwhile, linear control
system uses to optimize the phase for the t arterial road in this
system. Comparing before and after use the control, capacities and
service levels of this road and the adjacent road have improved
significantly.
Abstract: Network on Chip (NoC) has emerged as a promising
on chip communication infrastructure. Three Dimensional Integrate
Circuit (3D IC) provides small interconnection length between layers
and the interconnect scalability in the third dimension, which can
further improve the performance of NoC. Therefore, in this paper,
a hierarchical cluster-based interconnect architecture is merged with
the 3D IC. This interconnect architecture significantly reduces the
number of long wires. Since this architecture only has approximately
a quarter of routers in 3D mesh-based architecture, the average
number of hops is smaller, which leads to lower latency and higher
throughput. Moreover, smaller number of routers decreases the area
overhead. Meanwhile, some dual links are inserted into the bottlenecks
of communication to improve the performance of NoC.
Simulation results demonstrate our theoretical analysis and show the
advantages of our proposed architecture in latency, throughput and
area, when compared with 3D mesh-based architecture.