Abstract: The paper deals with the analysis of triggering
conditions and evolution processes of piping phenomena, in relation
to both mechanical and hydraulic aspects. In particular, the aim of
the study is to predict slope instabilities triggered by piping,
analysing the conditions necessary for a flow failure to occur. Really,
the mechanical effect involved in the loads redistribution around the
pipe is coupled to the drainage process arising from higher
permeability of the pipe. If after the pipe formation, the drainage
goes prevented for pipe clogging, the porewater pressure increase can
lead to the failure or even the liquefaction, with a subsequent flow
slide. To simulate the piping evolution and to verify relevant stability
conditions, a iterative coupled modelling approach has been pointed
out. As example, the proposed tool has been applied to the Stava
Valley disaster (July, 1985), demonstrating that piping might be one
of triggering phenomena of the tailings dams collapse.
Abstract: Sports Sciences has been historically supported by the positivism idea of science, especially by the mechanistic/reductionist and becomes a field that views experimentation and measurement as the mayor research domains. The disposition to simplify nature and the world by parts has fragmented and reduced the idea of bodyathletes as machine. In this paper we intent to re-think this perception lined by Complexity Theory. We come with the idea of athletes as a reflexive and active being (corporeity-body). Therefore, the construction of a training that considers the cultural, biological, psychological elements regarding the experience of the human corporal movements in a circumspect and responsible way could bring better chances of accomplishment. In the end, we hope to help coaches understand the intrinsic complexity of the body they are training, how better deal with it, and, in the field of a deep globalization among the different types of knowledge, to respect and accepted the peculiarities of knowledge that comprise this area.
Abstract: Wireless Sensor Networks (WSNs) are used to monitor/observe vast inaccessible regions through deployment of large number of sensor nodes in the sensing area. For majority of WSN applications, the collected data needs to be combined with geographic information of its origin to make it useful for the user; information received from remote Sensor Nodes (SNs) that are several hops away from base station/sink is meaningless without knowledge of its source. In addition to this, location information of SNs can also be used to propose/develop new network protocols for WSNs to improve their energy efficiency and lifetime. In this paper, range free localization protocols for WSNs have been proposed. The proposed protocols are based on weighted centroid localization technique, where the edge weights of SNs are decided by utilizing fuzzy logic inference for received signal strength and link quality between the nodes. The fuzzification is carried out using (i) Mamdani, (ii) Sugeno, and (iii) Combined Mamdani Sugeno fuzzy logic inference. Simulation results demonstrate that proposed protocols provide better accuracy in node localization compared to conventional centroid based localization protocols despite presence of unintentional radio frequency interference from radio frequency (RF) sources operating in same frequency band.
Abstract: The paper compares the treatment of fractions in a
typical undergraduate college curriculum and in abstract algebra
textbooks. It stresses that the main difference is that the
undergraduate curriculum treats equivalent fractions as equal, and
this treatment eventually leads to paradoxes and impairs the students-
ability to perceive ratios, proportions, radicals and rational exponents
adequately. The paper suggests a simplified version of rigorous
theory of fractions suitable for regular college curriculum.
Abstract: This paper reports work done to improve the modeling of complex processes when only small experimental data sets are available. Neural networks are used to capture the nonlinear underlying phenomena contained in the data set and to partly eliminate the burden of having to specify completely the structure of the model. Two different types of neural networks were used for the application of Pulping of Sugar Maple problem. A three layer feed forward neural networks, using the Preconditioned Conjugate Gradient (PCG) methods were used in this investigation. Preconditioning is a method to improve convergence by lowering the condition number and increasing the eigenvalues clustering. The idea is to solve the modified problem where M is a positive-definite preconditioner that is closely related to A. We mainly focused on Preconditioned Conjugate Gradient- based training methods which originated from optimization theory, namely Preconditioned Conjugate Gradient with Fletcher-Reeves Update (PCGF), Preconditioned Conjugate Gradient with Polak-Ribiere Update (PCGP) and Preconditioned Conjugate Gradient with Powell-Beale Restarts (PCGB). The behavior of the PCG methods in the simulations proved to be robust against phenomenon such as oscillations due to large step size.
Abstract: The need for multilingual communication in Japan has
increased due to an increase in the number of foreigners in the
country. When people communicate in their nonnative language,
the differences in language prevent mutual understanding among
the communicating individuals. In the medical field, communication
between the hospital staff and patients is a serious problem. Currently,
medical translators accompany patients to medical care facilities, and
the demand for medical translators is increasing. However, medical
translators cannot necessarily provide support, especially in cases in
which round-the-clock support is required or in case of emergencies.
The medical field has high expectations from information technology.
Hence, a system that supports accurate multilingual communication is
required. Despite recent advances in machine translation technology,
it is very difficult to obtain highly accurate translations. We have
developed a support system called M3 for multilingual medical
reception. M3 provides support functions that aid foreign patients in
the following respects: conversation, questionnaires, reception procedures,
and hospital navigation; it also has a Q&A function. Users
can operate M3 using a touch screen and receive text-based support.
In addition, M3 uses accurate translation tools called parallel texts
to facilitate reliable communication through conversations between
the hospital staff and the patients. However, if there is no parallel
text that expresses what users want to communicate, the users cannot
communicate. In this study, we have developed a circulating support
environment for multilingual medical communication using parallel
texts. The proposed environment can circulate necessary parallel texts
through the following procedure: (1) a user provides feedback about
the necessary parallel texts, following which (2) these parallel texts
are created and evaluated.
Abstract: In this paper, we have presented the effect of varying
time-delays on performance and stability in the single-channel multirate
sampled-data system in hard real-time (RT-Linux) environment.
The sampling task require response time that might exceed the
capacity of RT-Linux. So a straight implementation with RT-Linux is
not feasible, because of the latency of the systems and hence,
sampling period should be less to handle this task. The best sampling
rate is chosen for the sampled-data system, which is the slowest rate
meets all performance requirements. RT-Linux is consistent with its
specifications and the resolution of the real-time is considered 0.01
seconds to achieve an efficient result. The test results of our
laboratory experiment shows that the multi-rate control technique in
hard real-time operating system (RTOS) can improve the stability
problem caused by the random access delays and asynchronization.
Abstract: In this contribution is presented a complex design of
individual objects identification in the workplace of intelligent
assembly cell. Intelligent assembly cell is situated at Institute of
Manufacturing Systems and Applied Mechanics and is used for
pneumatic actuator assembly. Pneumatic actuator components are
pneumatic roller, cover, piston and spring. Two identification objects
alternatives for assembly are designed in the workplace of industrial
robot. In the contribution is evaluated and selected suitable
alternative for identification – 2D codes reader. The complex design
of individual object identification is going out of intelligent
manufacturing systems knowledge.
Intelligent assembly and manufacturing systems as systems of
new generation are gradually loaded in to the mechanical production,
when they are removeing human operation out of production process
and they also short production times.
Abstract: The article deals with the problems of political and
economic processes in Kazakhstan since independence in the context
of globalization. It analyzes the geopolitical situation and selfpositioning
processes in the world after the end of the "cold war". It
examines the problems of internal economization of the Republic for
20 years of independence. The authors argue that the reforms
proceeded in the economic sphere have brought ambiguous and
tangible results. Despite the difficult economic and political conditions
facing a world economical crisis the country has undergone
fundamental and radical transformations in the whole socio-economic
system
Abstract: Robust face recognition under various illumination
environments is very difficult and needs to be accomplished for
successful commercialization. In this paper, we propose an improved
illumination normalization method for face recognition. Illumination
normalization algorithm based on anisotropic smoothing is well known
to be effective among illumination normalization methods but
deteriorates the intensity contrast of the original image, and incurs less
sharp edges. The proposed method in this paper improves the previous
anisotropic smoothing-based illumination normalization method so
that it increases the intensity contrast and enhances the edges while
diminishing the effect of illumination variations. Due to the result of
these improvements, face images preprocessed by the proposed
illumination normalization method becomes to have more distinctive
feature vectors (Gabor feature vectors) for face recognition. Through
experiments of face recognition based on Gabor feature vector
similarity, the effectiveness of the proposed illumination
normalization method is verified.
Abstract: Shoots, with three leaves, of Paphiopedilum 'Delrosi'
were used as explants for multiple shoot induction. Modified
Hyponex medium was supplemented with thidiazuron (TDZ), N6-
benzyladenine (BA) or kinetin (Kn) alone and in combinations with
2,4-dichlorophenoxyacetic acid (2,4-D). All explants were cultured
for 15 weeks. It was found that TDZ alone at the concentration of
0.45μM or in combination with 4.52μM 2,4-D and 8.88μM BA in
combination with 13.56μM 2,4-D promoted multiple shoots. The
highest shoot sprouting efficiencies (80.0, 90.0 and 80.0%) and new
shoot numbers (1.5, 1.3 and 1.1) were obtained, respectively. Fresh
weight, height, numbers of leaf and root of new shoots and initial
explants were discussed.
Abstract: An Automated Rapid Maxillary Expander (ARME) is
a specially designed microcontroller-based orthodontic appliance to
overcome the shortcomings imposed by the traditional maxillary
expansion appliances. This new device is operates by automatically
widening the maxilla (upper jaw) by expanding the midpalatal suture
[1]. The ARME appliance that has been developed is a combination
of modified butterfly expander appliance, micro gear, micro motor,
and microcontroller to automatically produce light and continuous
pressure to expand the maxilla. For this study, the functionality of the
system is verified through laboratory tests by measure the forced
applied to the teeth each time the maxilla expands. The laboratory
test results show that the developed appliance meets the desired
performance specifications consistently.
Abstract: A novel nanofinishing process using improved ball
end magnetorheological (MR) finishing tool was developed for finishing of flat as well as 3D surfaces of ferromagnetic and non ferromagnetic workpieces. In this process a magnetically controlled
ball end of smart MR polishing fluid is generated at the tip surface of
the tool which is used as a finishing medium and it is guided to
follow the surface to be finished through computer controlled 3-axes
motion controller. The experiments were performed on ferromagnetic
workpiece surface in the developed MR finishing setup to study the effect of finishing time on final surface roughness. The performance
of present finishing process on final finished surface roughness was studied. The surface morphology was observed under scanning
electron microscopy and atomic force microscope. The final surface finish was obtained as low as 19.7 nm from the initial surface
roughness of 142.9 nm. The outcome of newly developed finishing process can be found useful in its applications in aerospace,
automotive, dies and molds manufacturing industries, semiconductor and optics machining etc.
Abstract: Semantic Web Technologies enable machines to
interpret data published in a machine-interpretable form on the web.
At the present time, only human beings are able to understand the
product information published online. The emerging semantic Web
technologies have the potential to deeply influence the further
development of the Internet Economy. In this paper we propose a
scenario based research approach to predict the effects of these new
technologies on electronic markets and business models of traders
and intermediaries and customers. Over 300 million searches are
conducted everyday on the Internet by people trying to find what
they need. A majority of these searches are in the domain of
consumer ecommerce, where a web user is looking for something to
buy. This represents a huge cost in terms of people hours and an
enormous drain of resources. Agent enabled semantic search will
have a dramatic impact on the precision of these searches. It will
reduce and possibly eliminate information asymmetry where a better
informed buyer gets the best value. By impacting this key
determinant of market prices semantic web will foster the evolution
of different business and economic models. We submit that there is a
need for developing these futuristic models based on our current
understanding of e-commerce models and nascent semantic web
technologies. We believe these business models will encourage
mainstream web developers and businesses to join the “semantic web
revolution."
Abstract: In this paper, we explore the applicability of the Sinc-
Collocation method to a three-dimensional (3D) oceanography model.
The model describes a wind-driven current with depth-dependent
eddy viscosity in the complex-velocity system. In general, the
Sinc-based methods excel over other traditional numerical methods
due to their exponentially decaying errors, rapid convergence and
handling problems in the presence of singularities in end-points.
Together with these advantages, the Sinc-Collocation approach that
we utilize exploits first derivative interpolation, whose integration
is much less sensitive to numerical errors. We bring up several
model problems to prove the accuracy, stability, and computational
efficiency of the method. The approximate solutions determined by
the Sinc-Collocation technique are compared to exact solutions and
those obtained by the Sinc-Galerkin approach in earlier studies. Our
findings indicate that the Sinc-Collocation method outperforms other
Sinc-based methods in past studies.
Abstract: The identification and classification of the spine deformity play an important role when considering surgical planning for adolescent patients with idiopathic scoliosis. The subject of this article is the Lenke classification of scoliotic spines using Cobb angle measurements. The purpose is two-fold: (1) design a rulebased diagram to assist clinicians in the classification process and (2) investigate a computer classifier which improves the classification time and accuracy. The rule-based diagram efficiency was evaluated in a series of scoliotic classifications by 10 clinicians. The computer classifier was tested on a radiographic measurement database of 603 patients. Classification accuracy was 93% using the rule-based diagram and 99% for the computer classifier. Both the computer classifier and the rule based diagram can efficiently assist clinicians in their Lenke classification of spine scoliosis.
Abstract: The empirical studies on High Performance Work Systems (HPWSs) and their impacts on firm performance have remarkably little in the developing countries. This paper reviews literatures on the HPWSs practices in different work settings, Western and Asian countries. A review on the empirical research leads to a conclusion that, country differences influence the Human Resource Management (HRM) practices. It is anticipated that there are similarities and differences in the extent of implementation of HPWSs practices by the Malaysian manufacturing firms due to the organizational contextual factors and, the HPWSs have a significant impact on firms- better performance amongst MNCs and local firms.
Abstract: Arvia®, a spin-out company of University of Manchester, UK is commercialising a water treatment technology for the removal of low concentrations of organics from water. This technology is based on the adsorption of organics onto graphite based adsorbents coupled with their electrochemical regeneration in a simple electrochemical cell. In this paper, the potential of the process to adsorb microorganisms and electrochemically disinfect them present in water has been demonstrated. Bench scale experiments have indicated that the process of adsorption using graphite adsorbents with electrochemical regeneration can be used for water disinfection effectively. The most likely mechanisms of disinfection of water through this process include direct electrochemical oxidation and electrochemical chlorination.
Abstract: This paper aims at developing a multilevel fuzzy
decision support model for urban rail transit planning schemes in
China under the background that China is presently experiencing an
unprecedented construction of urban rail transit. In this study, an
appropriate model using multilevel fuzzy comprehensive evaluation
method is developed. In the decision process, the followings are
considered as the influential objectives: traveler attraction,
environment protection, project feasibility and operation. In addition,
consistent matrix analysis method is used to determine the weights
between objectives and the weights between the objectives-
sub-indictors, which reduces the work caused by repeated
establishment of the decision matrix on the basis of ensuring the
consistency of decision matrix. The application results show that
multilevel fuzzy decision model can perfectly deal with the
multivariable and multilevel decision process, which is particularly
useful in the resolution of multilevel decision-making problem of
urban rail transit planning schemes.
Abstract: The network traffic data provided for the design of
intrusion detection always are large with ineffective information and
enclose limited and ambiguous information about users- activities.
We study the problems and propose a two phases approach in our
intrusion detection design. In the first phase, we develop a
correlation-based feature selection algorithm to remove the worthless
information from the original high dimensional database. Next, we
design an intrusion detection method to solve the problems of
uncertainty caused by limited and ambiguous information. In the
experiments, we choose six UCI databases and DARPA KDD99
intrusion detection data set as our evaluation tools. Empirical studies
indicate that our feature selection algorithm is capable of reducing the
size of data set. Our intrusion detection method achieves a better
performance than those of participating intrusion detectors.