Abstract: This study developed a high efficient and combined
biological and chemical filter treatment process. This process used
PAC (Powder Activated Carbon), Alum and attached growth
treatment process. The system removals of total nitrogen and total
phosphorus ratio of two were as high as 70% and 73%, moreover, the
effluent water was suitable to urban and agricultural water. Also the
advantages of this process are not only occupies small place but is
simple, economic and easy operating. Besides, our developed process
can keep stable process efficiency even in relative low load level.
Therefore, this study judges that use of the high efficient and
combined biological and chemical filter treatment process, it is
expected that the effluent water in this system can be reused as urban
and agricultural water.
Abstract: The purpose of this research is to compare the original
intra-oral digital dental radiograph images with images that are
enhanced using a combination of image processing algorithms. Intraoral
digital dental radiograph images are often noisy, blur edges and
low in contrast. A combination of sharpening and enhancement
method are used to overcome these problems. Three types of
proposed compound algorithms used are Sharp Adaptive Histogram
Equalization (SAHE), Sharp Median Adaptive Histogram
Equalization (SMAHE) and Sharp Contrast adaptive histogram
equalization (SCLAHE). This paper presents an initial study of the
perception of six dentists on the details of abnormal pathologies and
improvement of image quality in ten intra-oral radiographs. The
research focus on the detection of only three types of pathology
which is periapical radiolucency, widen periodontal ligament space
and loss of lamina dura. The overall result shows that SCLAHE-s
slightly improve the appearance of dental abnormalities- over the
original image and also outperform the other two proposed
compound algorithms.
Abstract: Oral health is particular important to the hospitalized
patients with chronic schizophrenia for an extreme high potential of the respiratory infections. Due to the degeneration of physical capability, patients of this kind typically fall dependent in the activity of daily living (ADL). A very high percentage of patients had dental
problems of which mostly could be easily avoid by easy regular tooth brushing. Purpose of the project is to develop a mechanism in helping the schizophrenia patients in rebuilding a tooth-cleaning habit. The
project observed and evaluated the tooth-cleaning behavior of 100
male patients in a psychiatric hospital, and found the majority of them
ignored such an activity in a three-month period of time. In the meantime, the primary care-givers were not aware or not convinced
the importance of such a need of dental hygiene, and thus few if any
tooth cleaning training or knowledge on dental hygiene were given to
the patients. The project then developed a program based on the numerous observations and discussions. The improvement program
included patients- group education, care-givers- training, and a
tool-kit for tooth-brush holding was erected. The project launched
with some incentive package. The outcomes were encouraging with
87% of the patients had rebuilt their tooth-brushing habits against
previous 22%, and the tooth cleaning kits were 100% kept against 22%
in the past. This project had significantly improved the oral health of
the patients. The project, included the procedure and the tool-kit
holder specific for this purpose, was a good examples for psychiatric
hospitals.
Abstract: Zeolite A and MCM-41 have extensive applications in basic science, petrochemical science, energy conservation/storage, medicine, chemical sensor, air purification, environmentally benign composite structure and waste remediation. However, the use of zeolite A and MCM-41 in these areas, especially environmental remediation, are restricted due to prohibitive production cost. Efficient recycling of and resource recovery from coal fly ash has been a major topic of current international research interest, aimed at achieving sustainable development of human society from the viewpoints of energy, economy, and environmental strategy. This project reported an original, novel, green and fast methods to produce nano-porous zeolite A and MCM-41 materials from coal fly ash. For zeolite A, this novel production method allows a reduction by half of the total production time while maintaining a high degree of crystallinity of zeolite A which exists in a narrower particle size distribution. For MCM-41, this remarkably green approach, being an environmentally friendly process and reducing generation of toxic waste, can produce pure and long-range ordered MCM-41 materials from coal fly ash. This approach took 24 h at 25 oC to produce 9 g of MCM-41 materials from 30 g of the coal fly ash, which is the shortest time and lowest reaction temperature required to produce pure and ordered MCM-41 materials (having the largest internal surface area) compared to the values reported in the literature. Performance evaluation of the produced zeolite A and MCM-41 materials in wastewater treatment and air pollution control were reported. The residual fly ash was also converted to zeolite Na-P1 which showed good performance in removal of multi-metal ions in wastewater. In wastewater treatment, compared to commercial-grade zeolite A, adsorbents produced from coal fly ash were effective in removing multi heavy metal ions in water and could be an alternative material for treatment of wastewater. In methane emission abatement, the zeolite A (produced from coal fly ash) achieved similar methane removal efficiency compared to the zeolite A prepared from pure chemicals. This report provides the guidance for production of zeolite A and MCM-41 from coal fly ash by a cost-effective approach which opens potential applications of these materials in environmental industry. Finally, environmental and economic aspects of production of zeolite A and MCM-41 from coal fly ash were discussed.
Abstract: Unlike Christianity and Buddhism, Islam, being one
of the three universal world religions, actively penetrates into
people-s everyday life. The main reason for this is that in Islam the
religion and ideology, philosophy, religious organizations and state
bodies are closely interrelated. In order to analyze the state of being
of interrelations of religion and civil society in Kazakhstan, it is
necessary to study Islam and its relations with spiritual culture of the
society. According to the Constitution of the Republic of Kazakhstan
the religion is separated from the state, i.e. each performs its own
function without interfering into each other-s affairs. The right of the
citizens of our republic to freedom of thinking and faith is based on
the Constitution of the RK, Civil Code, Law “On freedom of faith
and religious unions in the Republic of Kazakhstan".
Legislatively secured separation of the mosque and church from
the state does not mean that religion has no influence on the latter.
The state, consisting of citizens with their own beliefs, including
religious ones, cannot be isolated from the influence of religion.
Nowadays it is commonly accepted that it is not possible to
understand and forecast key social processes without taking into
account the religious factor.
Abstract: Present communication deals with general
distribution and diversification of Monogenean families parasitizing
different freshwater fish families of India. Levels of monogenean
parasitism and their diversity are significantly greater in Indian fishes.
The most monogeneans parasitized family of fish is Cyprinidae and
most dactylogyrids parasitise cyprinids. The family dactylogyridae
has more species than any other monogenean family and frequently
associated with cyprinid, silurids and bagrids families. Of the various
52 families of freshwater fishes from India, only the Anguillidae,
Balitoridae, Chacidae, Chanidae, Channidae, Cobitidae, Coiidae,
Erethistidae, Megalopidae, Pristidae, Psilorhynchidae, Salmonidae,
Schileidae, Sparidae, Synodontidae and Terapontidae were found to
be free of infection with monogeneans. The present study takes a
broad look at monogenean diversity in the freshwater fishes of India.
Abstract: In this paper, a novel wave equation for electromagnetic
waves in a medium having anisotropic permittivity has been derived
with the help of Maxwell-s curl equations. The x and y components
of the Maxwell-s equations are written with the permittivity () being
a 3 × 3 symmetric matrix. These equations are solved for Ex , Ey,
Hx, Hy in terms of Ez, Hz, and the partial derivatives. The Z
components of the Maxwell-s curl are then used to arrive to the
generalized Helmholtz equations for Ez and Hz.
Abstract: This paper addresses the stabilization issues for a class of uncertain switched neutral systems with nonlinear perturbations. Based on new classes of piecewise Lyapunov functionals, the stability assumption on all the main operators or the convex combination of coefficient matrices is avoid, and a new switching rule is introduced to stabilize the neutral systems. The switching rule is designed from the solution of the so-called Lyapunov-Metzler linear matrix inequalities. Finally, three simulation examples are given to demonstrate the significant improvements over the existing results.
Abstract: A theoretical study of the rigidities of slabs with
circular voids oriented in the longitudinal and in the transverse
direction is discussed. Equations are presented for predicting the
bending and torsional rigidities of the voided slabs. This paper
summarizes the results of an extensive literature search and initial
review of the current methods of analyzing voided slab. The various
methods of calculating the equivalent plate parameters, which are
necessary for two-dimensional analysis, are also reviewed. Static
deflections on voided slabs are shown to be in good agreement with
proposed equation.
Abstract: Currently WWW is the first solution for scholars in
finding information. But, analyzing and interpreting this volume of
information will lead to researchers overload in pursuing their
research.
Trend detection in scientific publication retrieval systems helps
scholars to find relevant, new and popular special areas by
visualizing the trend of input topic.
However, there are few researches on trend detection in scientific
corpora while their proposed models do not appear to be suitable.
Previous works lack of an appropriate representation scheme for
research topics.
This paper describes a method that combines Semantic Web and
ontology to support advance search functions such as trend detection
in the context of scholarly Semantic Web system (SSWeb).
Abstract: The main objectives of this study are to inspect and
identify any damage of jaimusi highway prestressed concrete bridge
after repair and strengthening of damaged structural members and to
evaluate the performance of the bridge structural members by
adopting static load test. Inspection program after repair and
strengthening includes identifying and evaluating the structural
members of bridge such as T-shape cantilever structure, hanging
beams, corbels, external tendons, anchor beams, sticking steel plate,
and piers. The results of inspection show that the overall state of the
bridge structural member after repair and strengthening is good. The
results of rebound test of concrete strength show that the average
strength of concrete is 46.31Mpa. Whereas, the average value of
concrete strength of anchor beam is 49.82Mpa. According to the
results of static load test, the experimental values are less than
theoretical values of internal forces, deflection, and strain, indicating
that the stiffness of the experimental structure, overall deformation
and integrity satisfy the designed standard and the working
performance is good, and the undertaking capacity has a certain
surplus. There is not visible change in the length and width of cracks
and there are not new cracks under experimental load.
Abstract: In this paper the fatigue crack initiation location of double shear lap joints, treated by interference fit and bolt clamping, have been investigated both experimentally and numerically. To do so, using the fracture section of available fatigue tested specimens of interference fitted and torque tightened Aluminum 2024-T3 plates, the crack initiation location was determined. The stress distribution attained from the finite element analysis was used to help explain the results observed in the experimental tests. The results showed that the fatigue crack initiation location changes from top and mid plane at the hole edge to somewhere far from the hole edge (stress concentration region) in different combination of clamping force, interference fit size and applied cyclic load ranges. It is worth mentioning that the fatigue crack initiation location affects the fatigue life of the specimens too.
Abstract: Using finite element method (FEM), the elastic
new strain-concentration factor (SNCF) of cylindrical bars
with circumferential flat-bottom groove is studied. This new
SNCF has been defined under triaxial stress state. The
employed specimens have constant groove depth with net
section and gross diameters of 10.0 and 16.7 mm,
respectively. The length of flatness ao has been varied form
0.0 ~12.5 mm to study the elastic SNCF of this type of
geometrical irregularities. The results that the elastic new
SNCF rapidly drops from its elastic value of the groove with
ao = 0.0, i.e. circumferential U-notch, and reaches minimum
value at ao = 2 mm. After that the elastic new SNCF becomes
nearly constant with increasing flatness length (ao). The value
of tensile load at yielding at the groove root increases with
increasing ao. The current results show that severity of the
notch decreases with increasing flatness length ao.
Abstract: Environment today is featured with aging population,
increasing prevalence of chronic disease and complex of medical
treatment. Safe use of pharmaceutics relied very much on the efforts
made by both the health- related organizations and as well as the
government agencies. As far as the specialization concern in providing
health services to the patients, the government actively issued and
implemented the divisions of medical treatment and pharmaceutical to
improve the quality of care and to reduce medication errors and ensure
public health. Pharmaceutical sub-sector policy has been implemented
for 13 years. This study attempts to explore the factors that affect the
patients- behavior intention of refilling a prescription from a NHIB
pharmacy. Samples were those patients refilling their prescriptions
with the case NHIB pharmacies. A self-administered questionnaire
was used to collect respondents- information while the patients or
family members visit the pharmacy for the refilling. 1,200
questionnaires were dispatched in 37 pharmacies that randomly
selected from Pingtung City, Dongkang, Chaozhou, Hengchun areas.
732 responses were gained with 604 valid samples for further analyses.
Results of data analyses indicated that respondents- attitude,
subjective norm, perceived behavior control and behavior intentions
toward refilling behavior varied from some demographic variables to
another. This research also suggested adding actual behavior, either by
a self-report or observed, into the research.
Abstract: The realization of current-mode quadrature oscillators
using current controlled current conveyor transconductance
amplifiers (CCCCTAs) and grounded capacitors is presented. The
proposed oscillators can provide 2 sinusoidal output currents with 90º
phase difference. It is enabled non-interactive dual-current control for
both the condition of oscillation and the frequency of oscillation.
High output impedances of the configurations enable the circuit to be
cascaded without additional current buffers. The use of only
grounded capacitors is ideal for integration. The circuit performances
are depicted through PSpice simulations, they show good agreement
to theoretical anticipation.
Abstract: Privacy issues commonly discussed among
researchers, practitioners, and end-users in pervasive healthcare.
Pervasive healthcare systems are applications that can support
patient-s need anytime and anywhere. However, pervasive healthcare
raises privacy concerns since it can lead to situations where patients
may not be aware that their private information is being shared and
becomes vulnerable to threat. We have systematically analyzed the
privacy issues and present a summary in tabular form to show the
relationship among the issues. The six issues identified are medical
information misuse, prescription leakage, medical information
eavesdropping, social implications for the patient, patient difficulties
in managing privacy settings, and lack of support in designing
privacy-sensitive applications. We narrow down the issues and chose
to focus on the issue of 'lack of support in designing privacysensitive
applications' by proposing a privacy-sensitive architecture
specifically designed for pervasive healthcare monitoring systems.
Abstract: The role of knowledge is a determinative factor in the
life of economy and society. To determine knowledge is not an easy
task yet the real task is to determine the right knowledge. From this
view knowledge is a sum of experience, ideas and cognitions which
can help companies to remain in markets and to realize a maximum
profit. At the same time changes of circumstances project in advance
that contents and demands of the right knowledge are changing. In
this paper we will analyse a special segment on the basis of an
empirical survey. We investigated the behaviour and strategies of
small and medium sized enterprises (SMEs) in the area of
knowledge-handling. This survey was realized by questionnaires and
wide range statistical methods were used during processing. As a
result we will show how these companies are prepared to operate in a
knowledge-based economy and in which areas they have prominent
deficiencies.
Abstract: Model Predictive Control (MPC) is an established control
technique in a wide range of process industries. The reason for
this success is its ability to handle multivariable systems and systems
having input, output or state constraints. Neverthless comparing to
PID controller, the implementation of the MPC in miniaturized
devices like Field Programmable Gate Arrays (FPGA) and microcontrollers
has historically been very small scale due to its complexity in
implementation and its computation time requirement. At the same
time, such embedded technologies have become an enabler for future
manufacturing enterprisers as well as a transformer of organizations
and markets. In this work, we take advantage of these recent advances
in this area in the deployment of one of the most studied and applied
control technique in the industrial engineering. In this paper, we
propose an efficient firmware for the implementation of constrained
MPC in the performed STM32 microcontroller using interior point
method. Indeed, performances study shows good execution speed
and low computational burden. These results encourage to develop
predictive control algorithms to be programmed in industrial standard
processes. The PID anti windup controller was also implemented in
the STM32 in order to make a performance comparison with the
MPC. The main features of the proposed constrained MPC framework
are illustrated through two examples.
Abstract: In the present era of aviation technology, autonomous navigation and control have emerged as a prime area of active research. Owing to the tremendous developments in the field, autonomous controls have led today’s engineers to claim that future of aerospace vehicle is unmanned. Development of guidance and navigation algorithms for an unmanned aerial vehicle (UAV) is an extremely challenging task, which requires efforts to meet strict, and at times, conflicting goals of guidance and control. In this paper, aircraft altitude and heading controllers and an efficient algorithm for self-governing navigation using MATLAB® mapping toolbox is presented which also enables loitering of a fixed wing UAV over a specified area. For this purpose, a nonlinear mathematical model of a UAV is used. The nonlinear model is linearized around a stable trim point and decoupled for controller design. The linear controllers are tested on the nonlinear aircraft model and navigation algorithm is subsequently developed for for autonomous flight of the UAV. The results are presented for trajectory controllers and waypoint based navigation. Our investigation reveals that MATLAB® mapping toolbox can be exploited to successfully deliver an efficient algorithm for autonomous aerial navigation for a UAV.
Abstract: Basel III (or the Third Basel Accord) is a global
regulatory standard on bank capital adequacy, stress testing and
market liquidity risk agreed upon by the members of the Basel
Committee on Banking Supervision in 2010-2011, and scheduled to
be introduced from 2013 until 2018. Basel III is a comprehensive set
of reform measures. These measures aim to; (1) improve the banking
sector-s ability to absorb shocks arising from financial and economic
stress, whatever the source, (2) improve risk management and
governance, (3) strengthen banks- transparency and disclosures.
Similarly the reform target; (1) bank level or micro-prudential,
regulation, which will help raise the resilience of individual banking
institutions to periods of stress. (2) Macro-prudential regulations,
system wide risk that can build up across the banking sector as well
as the pro-cyclical implication of these risks over time. These two
approaches to supervision are complementary as greater resilience at
the individual bank level reduces the risk system wide shocks.
Macroeconomic impact of Basel III; OECD estimates that the
medium-term impact of Basel III implementation on GDP growth is
in the range -0,05 percent to -0,15 percent per year. On the other hand
economic output is mainly affected by an increase in bank lending
spreads as banks pass a rise in banking funding costs, due to higher
capital requirements, to their customers. Consequently the estimated
effects on GDP growth assume no active response from monetary
policy. Basel III impact on economic output could be offset by a
reduction (or delayed increase) in monetary policy rates by about 30
to 80 basis points. The aim of this paper is to create a framework
based on the recent regulations in order to prevent financial crises.
Thus the need to overcome the global financial crisis will contribute
to financial crises that may occur in the future periods. In the first
part of the paper, the effects of the global crisis on the banking
system examine the concept of financial regulations. In the second
part; especially in the financial regulations and Basel III are analyzed.
The last section in this paper explored the possible consequences of
the macroeconomic impacts of Basel III.