Abstract: The zero truncated model is usually used in modeling
count data without zero. It is the opposite of zero inflated model.
Zero truncated Poisson and zero truncated negative binomial models
are discussed and used by some researchers in analyzing the
abundance of rare species and hospital stay. Zero truncated models
are used as the base in developing hurdle models. In this study, we
developed a new model, the zero truncated strict arcsine model,
which can be used as an alternative model in modeling count data
without zero and with extra variation. Two simulated and one real
life data sets are used and fitted into this developed model. The
results show that the model provides a good fit to the data. Maximum
likelihood estimation method is used in estimating the parameters.
Abstract: Nowadays, there is little information, concerning the
heat shield systems, and this information is not completely reliable to
use in so many cases. for example, the precise calculation cannot be
done for various materials. In addition, the real scale test has two
disadvantages: high cost and low flexibility, and for each case we
must perform a new test. Hence, using numerical modeling program
that calculates the surface recession rate and interior temperature
distribution is necessary. Also, numerical solution of governing
equation for non-charring material ablation is presented in order to
anticipate the recession rate and the heat response of non-charring
heat shields. the governing equation is nonlinear and the Newton-
Rafson method along with TDMA algorithm is used to solve this
nonlinear equation system. Using Newton- Rafson method for
solving the governing equation is one of the advantages of the
solving method because this method is simple and it can be easily
generalized to more difficult problems. The obtained results
compared with reliable sources in order to examine the accuracy of
compiling code.
Abstract: ELS is an important ground based hardware in the
loop simulator used for aerodynamics torque loading experiments
of the actuators under test. This work focuses on improvement of the
transient response of torque controller with parameters uncertainty
of Electrical Load Simulator (ELS).The parameters of load simulator
are estimated online and the model is updated, eliminating the model
error and improving the steady state torque tracking response of
torque controller. To improve the Transient control performance the
gain of robust term of SMC is updated online using fuzzy logic
system based on the amount of uncertainty in parameters of load
simulator. The states of load simulator which cannot be measured
directly are estimated using luenberger observer with update of new
estimated parameters. The stability of the control scheme is verified
using Lyapunov theorem. The validity of proposed control scheme is
verified using simulations.
Abstract: Deaminated lesions were produced via nitrosative oxidation of natural nucleobases; uracul (Ura, U) from cytosine (Cyt, C), hypoxanthine (Hyp, H) from adenine (Ade, A), and xanthine (Xan, X) and oxanine (Oxa, O) from guanine (Gua, G). Such damaged nucleobases may induce mutagenic problems, so that much attentions and efforts have been poured on the revealing of their mechanisms in vivo or in vitro. In this study, we employed these deaminated lesions as useful probes for analysis of DNA-binding/recognizing proteins or enzymes. Since the pyrimidine lesions such as Hyp, Oxa and Xan are employed as analogues of guanine, their comparative uses are informative for analyzing the role of Gua in DNA sequence in DNA-protein interaction. Several DNA oligomers containing such Hyp, Oxa or Xan substituted for Gua were designed to reveal the molecular interaction between DNA and protein. From this approach, we have got useful information to understand the molecular mechanisms of the DNA-recognizing enzymes, which have not ever been observed using conventional DNA oligomer composed of just natural nucleobases.
Abstract: Most scientific programs have large input and output
data sets that require out-of-core programming or use virtual memory
management (VMM). Out-of-core programming is very error-prone
and tedious; as a result, it is generally avoided. However, in many
instance, VMM is not an effective approach because it often results
in substantial performance reduction. In contrast, compiler driven I/O
management will allow a program-s data sets to be retrieved in parts,
called blocks or tiles. Comanche (COmpiler MANaged caCHE) is a
compiler combined with a user level runtime system that can be used
to replace standard VMM for out-of-core programs. We describe
Comanche and demonstrate on a number of representative problems
that it substantially out-performs VMM. Significantly our system
does not require any special services from the operating system and
does not require modification of the operating system kernel.
Abstract: This paper demonstrates design and construction of
microcontroller-based telephone exchange system and the aims of
this paper is to study telecommunication, connection with
PIC16F877A and DTMF MT8870D. In microcontroller system, PIC
16F877 microcontroller is used to control the call processing. Dial
tone, busy tone and ring tone are provided during call progress.
Instead of using ready made tone generator IC, oscillator based tone
generator is used. The results of this telephone exchange system are
perfect for homes and small businesses needing the extensions. It
requires the phone operation control system, the analog interface
circuit and the switching circuit. This exchange design will contain
eight channels.
It is the best low cost, good quality telephone exchange for today-s
telecommunication needs. It offers the features available in much
more expensive PBX units without using high-priced phones. It is for
long distance telephone services.
Abstract: Public awareness towards green energy are on the rise and this can be prove by many product being manufactured or prerequired to be made as energy saving devices mainly to save consumer from spending more on utility billing. These schemes are popular nowadays and many homemade appliances are turned into energy saving gadget which attracts the attention of consumers. Knowing the public demands and pattern towards purchasing home appliances thus the idea of “energy saving suction hood (ESSH)" is proposed. The ESSH can be used in many places that require smoke ventilation or even to reduce the room temperature as many conventional suction hoods (CSH) do, but this device works automatically by the usage of sensors that detects the smoke/temperature and automatically spins the exhaust fan. As it turns, the mechanical rotation rotates the AC generator which is coupled together with the fan and then charges the battery. The innovation of this product is, it does not rely on the utility supply as it is also hook up with a solar panel which also charges the battery, Secondly, it generates energy as the exhaust fan mechanically rotates. Thirdly, an energy loop back feature is introduced to this system which will supply for the ventilator fan. Another major innovation is towards interfacing this device with an in house production of generator. This generator is produced by proper design on stator as well as rotor to reduce the losses. A comparison is made between the ESSH and the CSH and result shows that the ESSH saves 172.8kWh/year of utility supply which is used by CSH. This amount of energy can save RM 3.14 from monthly utility bill and a total of RM 37.67 per year. In fact this product can generate 175 Watt of power from generator(75W) and solar panel(100W) that can be used either to supply other household appliances and/or to loop back to supply the fans motor. The innovation of this system is essential for future production of other equipment by using the loopback power method and turning most equipment into a standalone system.
Abstract: Recently, bianisotropic media again received
increasing importance in electromagnetic theory because of advances
in material science which enable the manufacturing of complex
bianisotropic materials. By using Maxwell's equations and
corresponding boundary conditions, the electromagnetic field
distribution in bianisotropic solenoid coils is determined and the
influence of the bianisotropic behaviour of coil to the impedance and
Q-factor is considered. Bianisotropic media are the largest class of
linear media which is able to describe the macroscopic material
properties of artificial dielectrics, artificial magnetics, artificial chiral
materials, left-handed materials, metamaterials, and other composite
materials. Several special cases of coils, filled with complex
substance, have been analyzed. Results obtained by using the
analytical approach are compared with values calculated by
numerical methods, especially by our new hybrid EEM/BEM method
and FEM.
Abstract: The purpose of this study is to identify the critical success factors (CSFs) for the effective implementation of Six Sigma in non-formal service Sectors.
Based on the survey of literature, the critical success factors (CSFs) for Six Sigma have been identified and are assessed for their importance in Non-formal service sector using Delphi Technique. These selected CSFs were put forth to the panel of expert to cluster them and prepare cognitive map to establish their relationship.
All the critical success factors examined and obtained from the review of literature have been assessed for their importance with respect to their contribution to Six Sigma effectiveness in non formal service sector.
The study is limited to the non-formal service sectors involved in the organization of religious festival only. However, the similar exercise can be conducted for broader sample of other non-formal service sectors like temple/ashram management, religious tours management etc.
The research suggests an approach to identify CSFs of Six Sigma for Non-formal service sector. All the CSFs of the formal service sector will not be applicable to Non-formal services, hence opinion of experts was sought to add or delete the CSFs. In the first round of Delphi, the panel of experts has suggested, two new CSFs-“competitive benchmarking (F19) and resident’s involvement (F28)”, which were added for assessment in the next round of Delphi. One of the CSFs-“fulltime six sigma personnel (F15)” has been omitted in proposed clusters of CSFs for non-formal organization, as it is practically impossible to deploy full time trained Six Sigma recruits.
Abstract: Static synchronous compensator (STATCOM) is a shunt connected voltage source converter (VSC), which can affect rapid control of reactive flow in the transmission line by controlling the generated a.c. voltage. The main aim of the paper is to design a power system installed with a Static synchronous compensator (STATCOM) and demonstrates the application of the linearised Phillips-heffron model in analyzing the damping effect of the STATCOM to improve power system oscillation stability. The proposed PI controller is designed to coordinate two control inputs: Voltage of the injection bus and capacitor voltage of the STATCOM, to improve the Dynamic stability of a SMIB system .The power oscillations damping (POD) control and power system stabilizer (PSS) and their coordinated action with proposed controllers are tested. The simulation result shows that the proposed damping controllers provide satisfactory performance in terms of improvements of dynamic stability of the system.
Abstract: Cryptographic algorithms play a crucial role in the
information society by providing protection from unauthorized
access to sensitive data. It is clear that information technology will
become increasingly pervasive, Hence we can expect the emergence
of ubiquitous or pervasive computing, ambient intelligence. These
new environments and applications will present new security
challenges, and there is no doubt that cryptographic algorithms and
protocols will form a part of the solution. The efficiency of a public
key cryptosystem is mainly measured in computational overheads,
key size and bandwidth. In particular the RSA algorithm is used in
many applications for providing the security. Although the security
of RSA is beyond doubt, the evolution in computing power has
caused a growth in the necessary key length. The fact that most chips
on smart cards can-t process key extending 1024 bit shows that there
is need for alternative. NTRU is such an alternative and it is a
collection of mathematical algorithm based on manipulating lists of
very small integers and polynomials. This allows NTRU to high
speeds with the use of minimal computing power. NTRU (Nth degree
Truncated Polynomial Ring Unit) is the first secure public key
cryptosystem not based on factorization or discrete logarithm
problem. This means that given sufficient computational resources
and time, an adversary, should not be able to break the key. The
multi-party communication and requirement of optimal resource
utilization necessitated the need for the present day demand of
applications that need security enforcement technique .and can be
enhanced with high-end computing. This has promoted us to develop
high-performance NTRU schemes using approaches such as the use
of high-end computing hardware. Peer-to-peer (P2P) or enterprise
grids are proven as one of the approaches for developing high-end
computing systems. By utilizing them one can improve the
performance of NTRU through parallel execution. In this paper we
propose and develop an application for NTRU using enterprise grid
middleware called Alchemi. An analysis and comparison of its
performance for various text files is presented.
Abstract: In this research, we propose a weighted class based
queuing (WCBQ) mechanism to provide class differentiation and to
reduce the load for the IMS (IP Multimedia Subsystem) presence
server (PS). The tasks of admission controller for the PS are
demonstrated. Analysis and simulation models are developed to
quantify the performance of WCBQ scheme. An optimized dropping
time frame has been developed based on which some of the preexisting
messages are dropped from the PS-buffer. Cost functions are
developed and simulation comparison has been performed with FCFS
(First Come First Served) scheme. The results show that the PS
benefits significantly from the proposed queuing and dropping
algorithm (WCBQ) during heavy traffic.
Abstract: This study analyzes on the Social Network Game
(SNG), ANIPANG, in order to discover its unique fun elements, so
that suggest new methodologies for development of SNGs. ANIPANG
is the most popular SNG in the South Korea on 2012. Recently, the
game industry is paying close attention to mobile-based SNGs due to
the rapid prevalence of smart-phones and social network services.
However, SNGs are not online games simply. Although the fun of
most online games is the victory through competition with other
players or the game system, the fun of SNG is the communication
through the collaboration with other players. Thus, features of users
and environments of game should be considered for the game industry
and for the fun of SNG to users.
Abstract: Many accidents were happened because of fast driving, habitual working overtime or tired spirit. This paper presents a solution of remote warning for vehicles collision avoidance using vehicular communication. The development system integrates dedicated short range communication (DSRC) and global position system (GPS) with embedded system into a powerful remote warning system. To transmit the vehicular information and broadcast vehicle position; DSRC communication technology is adopt as the bridge. The proposed system is divided into two parts of the positioning andvehicular units in a vehicle. The positioning unit is used to provide the position and heading information from GPS module, and furthermore the vehicular unit is used to receive the break, throttle, and othersignals via controller area network (CAN) interface connected to each mechanism. The mobile hardware are built with an embedded system using X86 processor in Linux system. A vehicle is communicated with other vehicles via DSRC in non-addressed protocol with wireless access in vehicular environments (WAVE) short message protocol. From the position data and vehicular information, this paper provided a conflict detection algorithm to do time separation and remote warning with error bubble consideration. And the warning information is on-line displayed in the screen. This system is able to enhance driver assistance service and realize critical safety by using vehicular information from the neighbor vehicles.KeywordsDedicated short range communication, GPS, Control area network, Collision avoidance warning system.
Abstract: Employees commonly encounter unpredictable and
unavoidable work related stressors. Exposure to such stressors can
evoke negative appraisals and associated adverse mental, physical,
and behavioral responses. Because Acceptance and Commitment
Therapy (ACT) emphasizes acceptance of unavoidable stressors and
diffusion from negative appraisals, it may be particularly beneficial
for work stress. Forty-five workers were randomly assigned to an
ACT intervention for work stress (n = 21) or a waitlist control group
(n = 24). The intervention consisted of two 3-hour sessions spaced
one week apart. An examination of group process and outcomes was
conducted using the Revised Sessions Rating Scale. Results indicated
that the ACT participants reported that they perceived the
intervention to be supportive, task focused, and without adverse
therapist behaviors (e.g., feelings of being criticized or discounted).
Additionally, the second session (values clarification and
commitment to action) was perceived to be more supportive and task
focused than the first session (mindfulness, defusion). Process ratings
were correlated with outcomes. Results indicated that perceptions of
therapy supportiveness and task focus were associated with reduced
psychological distress and improved perceived physical health.
Abstract: Hemodialysis patients might suffer from unhealthy
care behaviors or long-term dialysis treatments. Ultimately they need
to be hospitalized. If the hospitalization rate of a hemodialysis center
is high, its quality of service would be low. Therefore, how to decrease
hospitalization rate is a crucial problem for health care. In this study
we combined temporal abstraction with data mining techniques for
analyzing the dialysis patients' biochemical data to develop a decision
support system. The mined temporal patterns are helpful for clinicians
to predict hospitalization of hemodialysis patients and to suggest them
some treatments immediately to avoid hospitalization.
Abstract: The article deals with the relation between rainfall in selected months and subsequent weed infestation of spring barley. The field experiment was performed at Mendel University agricultural enterprise in Žabčice, Czech Republic. Weed infestation was measured in spring barley vegetation in years 2004 to 2012. Barley was grown in three tillage variants: conventional tillage technology (CT), minimization tillage technology (MT), and no tillage (NT). Precipitation was recorded in one-day intervals. Monthly precipitation was calculated from the measured values in the months of October through to April. The technique of canonical correspondence analysis was applied for further statistical processing. 41 different species of weeds were found in the course of the 9-year monitoring period. The results clearly show that precipitation affects the incidence of most weed species in the selected months, but acts differently in the monitored variants of tillage technologies.
Abstract: This paper presents design features of a rescue robot, named CEO Mission II. Its body is designed to be the track wheel type with double front flippers for climbing over the collapse and the rough terrain. With 125 cm. long, 5-joint mechanical arm installed on the robot body, it is deployed not only for surveillance from the top view but also easier and faster access to the victims to get their vital signs. Two cameras and sensors for searching vital signs are set up at the tip of the multi-joint mechanical arm. The third camera is at the back of the robot for driving control. Hardware and software of the system, which controls and monitors the rescue robot, are explained. The control system is used for controlling the robot locomotion, the 5-joint mechanical arm, and for turning on/off devices. The monitoring system gathers all information from 7 distance sensors, IR temperature sensors, 3 CCD cameras, voice sensor, robot wheels encoders, yawn/pitch/roll angle sensors, laser range finder and 8 spare A/D inputs. All sensors and controlling data are communicated with a remote control station via IEEE 802.11b Wi-Fi. The audio and video data are compressed and sent via another IEEE 802.11g Wi-Fi transmitter for getting real-time response. At remote control station site, the robot locomotion and the mechanical arm are controlled by joystick. Moreover, the user-friendly GUI control program is developed based on the clicking and dragging method to easily control the movement of the arm. Robot traveling map is plotted from computing the information of wheel encoders and the yawn/pitch data. 2D Obstacle map is plotted from data of the laser range finder. The concept and design of this robot can be adapted to suit many other applications. As the Best Technique awardee from Thailand Rescue Robot Championship 2006, all testing results are satisfied.
Abstract: In spite of all advancement in software testing,
debugging remains a labor-intensive, manual, time consuming, and
error prone process. A candidate solution to enhance debugging
process is to fuse it with testing process. To achieve this integration,
a possible solution may be categorizing common software tests and
errors followed by the effort on fixing the errors through general
solutions for each test/error pair. Our approach to address this issue is
based on Christopher Alexander-s pattern and pattern language
concepts. The patterns in this language are grouped into three major
sections and connect the three concepts of test, error, and debug.
These patterns and their hierarchical relationship shape a pattern
language that introduces a solution to solve software errors in a
known testing context.
Finally, we will introduce our developed framework ADE as a
sample implementation to support a pattern of proposed language,
which aims to automate the whole process of evolving software
design via evolutionary methods.
Abstract: This paper proposes a novel system for monitoring the
health of underground pipelines. Some of these pipelines transport
dangerous contents and any damage incurred might have catastrophic
consequences. However, most of these damage are unintentional and
usually a result of surrounding construction activities. In order to
prevent these potential damages, monitoring systems are
indispensable. This paper focuses on acoustically recognizing road
cutters since they prelude most construction activities in modern
cities. Acoustic recognition can be easily achieved by installing a
distributed computing sensor network along the pipelines and using
smart sensors to “listen" for potential threat; if there is a real threat,
raise some form of alarm. For efficient pipeline monitoring, a novel
monitoring approach is proposed. Principal Component Analysis
(PCA) was studied and applied. Eigenvalues were regarded as the
special signature that could characterize a sound sample, and were
thus used for the feature vector for sound recognition. The denoising
ability of PCA could make it robust to noise interference. One class
SVM was used for classifier. On-site experiment results show that the
proposed PCA and SVM based acoustic recognition system will be
very effective with a low tendency for raising false alarms.