Identification of Individual Objects at the Intelligent Assembly Cell
In this contribution is presented a complex design of
individual objects identification in the workplace of intelligent
assembly cell. Intelligent assembly cell is situated at Institute of
Manufacturing Systems and Applied Mechanics and is used for
pneumatic actuator assembly. Pneumatic actuator components are
pneumatic roller, cover, piston and spring. Two identification objects
alternatives for assembly are designed in the workplace of industrial
robot. In the contribution is evaluated and selected suitable
alternative for identification – 2D codes reader. The complex design
of individual object identification is going out of intelligent
manufacturing systems knowledge.
Intelligent assembly and manufacturing systems as systems of
new generation are gradually loaded in to the mechanical production,
when they are removeing human operation out of production process
and they also short production times.
[1] N. Danišová, E. Hrušková, K.Velíšek,:"Application of sequential
diagrams in manufacturing assembly cell." In: Annals of DAAAM and
Proceedings of DAAAM Symposium. - ISSN 1726-9679. - Vol. 20, No.
1 Annals of DAAAM for 2009 & Proceedings of the 20th international
DAAAM symposium "Intelligent manufacturing & automation: Focus
on theory, practice and education" 25 - 28th November 2009, Vienna,
Austria. - Vienna : DAAAM International Vienna, 2009. - ISBN 978-3-
901509-70-4, s. 0199-0200
[2] N. Danišová, K. Velíšek, P. Košťál "Automated tool changing system in
the intelligent manufacturing and assembly cell." In: ISCCC 2009 :
Proceedings of the 2009 International Symposium on Computing,
Communication and Control, October 9-11, 2009, Singapore. -
Singapore : International Association of Computer Science and
Information Technology Press, 2009. - ISBN 978-9-8108-3815-7. - S. 1-
8
[3] N. Danišová, R. ZvolenskÛ, K. Velíšek, "Design additional check station
with intelligent camera syste" registrovanÛ v ISI Proceedings.In: Annals
of DAAAM and Proceedings of DAAAM Symposium. - ISSN 1726-
9679. - Vol. 19, No.1. Annals of DAAAM for 2008 & Proceedings of
the 19th International DAAAM Symposium "Intelligent Manufacturing
& Automation: Focus on Next Generation of Intelligent Systems and
Solutions", 22-25th October 2008, Trnava, Slovakia. - Viedeň :
DAAAM International Vienna, 2008. - ISBN 978-3-901509-68-1, s.
[4] A. Mudriková, P. Košťál, M. Matúšová, "Building of a production
system program control laboratory" In: Annals of DAAAM and
Proceedings of DAAAM Symposium. - ISSN 1726-9679. - Vol. 20, No.
1 Annals of DAAAM for 2009 & Proceedings of the 20th international
DAAAM symposium "Intelligent manufacturing & automation: Focus
on theory, practice and education" 25 - 28th November 2009, Vienna,
Austria. - Vienna : DAAAM International Vienna, 2009. - ISBN 978-3-
901509-70-4, s. 0603-0604
[5] F. Pecháček, A. Javorová, " A computer based design manufacturing
system." In: MicroCAD 2009 : Section M: Production Engineering and
Manufacturing Systems. XXIII. International Scientific Conference, 19-
20 March 2009, Miskolc. - Miskolc : University of Miskolc, 2009. -
ISBN 978-963-661-878-0. - S. 175-180
[6] P. Košťál, M. Matúšová, M. Charbulová, "Clamping fixtures in cell
manufacturing"registrovanÛ v ISI Proceedings. In: Annals of DAAAM
and Proceedings of DAAAM Symposium. - ISSN 1726-9679. - Vol. 19,
No.1. Annals of DAAAM for 2008 & Proceedings of the 19th
International DAAAM Symposium "Intelligent Manufacturing &
Automation: Focus on Next Generation of Intelligent Systems and
Solutions", 22-25th October 2008, Trnava, Slovakia. - Viedeň :
DAAAM International Vienna, 2008. - ISBN 978-3-901509-68-1, s.
0721-0722
[7] J. Majerík,Š. Bajčík, "CAD/CAM systems aid by computer", 2008,
Strojárstvo, Vol. 12, No. 11, 2008, p. 108 - 109, ISSN 1335-2938
[8] J. Nov├íkov├í., L. Petřkovsk├í., J. Brychta , D. Stan─ìekov├í. 2009.
"Influence of Cutting Parameters on Integrity Surface at High Speed
Cuttin". Transactions of the VŠB - Technical University of Ostrava.
Mechanical Series, 2009, ročník LV., číslo 1/2009, Česká republika.
Ostrava : VŠB - TUO, 2009, s. 203 - 209. ISBN 978-80-248-2051-4.
[9] Z. Godavov├í, K, J. Majer├¡k, ÔÇ×Mechatronic Product Proporcionality and
Inter-Changeability Management: Mechanical Components", November
25-28,2009, In: Annal of DAAAM for 2009&Proceedings of the 20th
International DAAAM Symposium Intelligent Manufacturing &
Automation: Focus on Theory, Practice and Education : World
Symposium. - ISSN 1726-9679. - Vienna: Vienna University of
Technology, 2009. - ISBN 978-3-901509-70-4. - p.1933-1934.
[10] K. Vel├¡┼íek, S. ┼áebeňov├í and R. Ružarovsk├¢: Transport systems in
flexible manufacturing. In: I. Central European Conference on Logistics
: 26 November 2010, Miskolc, Hungary. - Miskolc : University of
Miskolc, 2010. - ISBN 978-963-661-946-6. - [5]
[11] R. Ružarovsk├¢, ┼á. Horv├íth and K. Vel├¡┼íek: Utilization of design method
for model proposition of automated assembly device in IAC. In:
CEURSIS 2010 : The International Conference of the Carpathian Euro-
Region Specialists in Industrial Systems. 8th Edition. 12-14 May, 2010
Baia Mare, Romania. - Baia Mare: North University of Baia Mare, 2010.
- ISBN 978-606-536-094-5. - S. 257-262
[12] F. Pech├í─ìek, R. Ružarovsk├¢ and R. Zvolensk├¢: Application of design
methodology in automated disassembly process. - článok uverejnenÛ v
mimoriadnom čísle 2010 Web časopisu MTF STU Materials Science
and technology, str. 42-48. In: Stretnutie ústavov a katedier vÛrobnÛch
strojov a robotiky 2010. - Trnava : AlumniPress, 2010. - ISBN 978-80-
8096-124-4. - S. 1-6
[13] A. Mudriková and M. Charbulová: Material flow in flexible
manufacturing cell. In: AMO Conference. - ISSN 1313-4264. - 10.
International conference, 27 - 29 June 2010 AMO 10, 27 June - 01 July
2010 CEEPUS (2010), s. 1-9
[1] N. Danišová, E. Hrušková, K.Velíšek,:"Application of sequential
diagrams in manufacturing assembly cell." In: Annals of DAAAM and
Proceedings of DAAAM Symposium. - ISSN 1726-9679. - Vol. 20, No.
1 Annals of DAAAM for 2009 & Proceedings of the 20th international
DAAAM symposium "Intelligent manufacturing & automation: Focus
on theory, practice and education" 25 - 28th November 2009, Vienna,
Austria. - Vienna : DAAAM International Vienna, 2009. - ISBN 978-3-
901509-70-4, s. 0199-0200
[2] N. Danišová, K. Velíšek, P. Košťál "Automated tool changing system in
the intelligent manufacturing and assembly cell." In: ISCCC 2009 :
Proceedings of the 2009 International Symposium on Computing,
Communication and Control, October 9-11, 2009, Singapore. -
Singapore : International Association of Computer Science and
Information Technology Press, 2009. - ISBN 978-9-8108-3815-7. - S. 1-
8
[3] N. Danišová, R. ZvolenskÛ, K. Velíšek, "Design additional check station
with intelligent camera syste" registrovanÛ v ISI Proceedings.In: Annals
of DAAAM and Proceedings of DAAAM Symposium. - ISSN 1726-
9679. - Vol. 19, No.1. Annals of DAAAM for 2008 & Proceedings of
the 19th International DAAAM Symposium "Intelligent Manufacturing
& Automation: Focus on Next Generation of Intelligent Systems and
Solutions", 22-25th October 2008, Trnava, Slovakia. - Viedeň :
DAAAM International Vienna, 2008. - ISBN 978-3-901509-68-1, s.
[4] A. Mudriková, P. Košťál, M. Matúšová, "Building of a production
system program control laboratory" In: Annals of DAAAM and
Proceedings of DAAAM Symposium. - ISSN 1726-9679. - Vol. 20, No.
1 Annals of DAAAM for 2009 & Proceedings of the 20th international
DAAAM symposium "Intelligent manufacturing & automation: Focus
on theory, practice and education" 25 - 28th November 2009, Vienna,
Austria. - Vienna : DAAAM International Vienna, 2009. - ISBN 978-3-
901509-70-4, s. 0603-0604
[5] F. Pecháček, A. Javorová, " A computer based design manufacturing
system." In: MicroCAD 2009 : Section M: Production Engineering and
Manufacturing Systems. XXIII. International Scientific Conference, 19-
20 March 2009, Miskolc. - Miskolc : University of Miskolc, 2009. -
ISBN 978-963-661-878-0. - S. 175-180
[6] P. Košťál, M. Matúšová, M. Charbulová, "Clamping fixtures in cell
manufacturing"registrovanÛ v ISI Proceedings. In: Annals of DAAAM
and Proceedings of DAAAM Symposium. - ISSN 1726-9679. - Vol. 19,
No.1. Annals of DAAAM for 2008 & Proceedings of the 19th
International DAAAM Symposium "Intelligent Manufacturing &
Automation: Focus on Next Generation of Intelligent Systems and
Solutions", 22-25th October 2008, Trnava, Slovakia. - Viedeň :
DAAAM International Vienna, 2008. - ISBN 978-3-901509-68-1, s.
0721-0722
[7] J. Majerík,Š. Bajčík, "CAD/CAM systems aid by computer", 2008,
Strojárstvo, Vol. 12, No. 11, 2008, p. 108 - 109, ISSN 1335-2938
[8] J. Nov├íkov├í., L. Petřkovsk├í., J. Brychta , D. Stan─ìekov├í. 2009.
"Influence of Cutting Parameters on Integrity Surface at High Speed
Cuttin". Transactions of the VŠB - Technical University of Ostrava.
Mechanical Series, 2009, ročník LV., číslo 1/2009, Česká republika.
Ostrava : VŠB - TUO, 2009, s. 203 - 209. ISBN 978-80-248-2051-4.
[9] Z. Godavov├í, K, J. Majer├¡k, ÔÇ×Mechatronic Product Proporcionality and
Inter-Changeability Management: Mechanical Components", November
25-28,2009, In: Annal of DAAAM for 2009&Proceedings of the 20th
International DAAAM Symposium Intelligent Manufacturing &
Automation: Focus on Theory, Practice and Education : World
Symposium. - ISSN 1726-9679. - Vienna: Vienna University of
Technology, 2009. - ISBN 978-3-901509-70-4. - p.1933-1934.
[10] K. Vel├¡┼íek, S. ┼áebeňov├í and R. Ružarovsk├¢: Transport systems in
flexible manufacturing. In: I. Central European Conference on Logistics
: 26 November 2010, Miskolc, Hungary. - Miskolc : University of
Miskolc, 2010. - ISBN 978-963-661-946-6. - [5]
[11] R. Ružarovsk├¢, ┼á. Horv├íth and K. Vel├¡┼íek: Utilization of design method
for model proposition of automated assembly device in IAC. In:
CEURSIS 2010 : The International Conference of the Carpathian Euro-
Region Specialists in Industrial Systems. 8th Edition. 12-14 May, 2010
Baia Mare, Romania. - Baia Mare: North University of Baia Mare, 2010.
- ISBN 978-606-536-094-5. - S. 257-262
[12] F. Pech├í─ìek, R. Ružarovsk├¢ and R. Zvolensk├¢: Application of design
methodology in automated disassembly process. - článok uverejnenÛ v
mimoriadnom čísle 2010 Web časopisu MTF STU Materials Science
and technology, str. 42-48. In: Stretnutie ústavov a katedier vÛrobnÛch
strojov a robotiky 2010. - Trnava : AlumniPress, 2010. - ISBN 978-80-
8096-124-4. - S. 1-6
[13] A. Mudriková and M. Charbulová: Material flow in flexible
manufacturing cell. In: AMO Conference. - ISSN 1313-4264. - 10.
International conference, 27 - 29 June 2010 AMO 10, 27 June - 01 July
2010 CEEPUS (2010), s. 1-9
@article{"International Journal of Mechanical, Industrial and Aerospace Sciences:53089", author = "Ružarovský and Roman and Danišová and Nina and Velíšek and Karol", title = "Identification of Individual Objects at the Intelligent Assembly Cell", abstract = "In this contribution is presented a complex design of
individual objects identification in the workplace of intelligent
assembly cell. Intelligent assembly cell is situated at Institute of
Manufacturing Systems and Applied Mechanics and is used for
pneumatic actuator assembly. Pneumatic actuator components are
pneumatic roller, cover, piston and spring. Two identification objects
alternatives for assembly are designed in the workplace of industrial
robot. In the contribution is evaluated and selected suitable
alternative for identification – 2D codes reader. The complex design
of individual object identification is going out of intelligent
manufacturing systems knowledge.
Intelligent assembly and manufacturing systems as systems of
new generation are gradually loaded in to the mechanical production,
when they are removeing human operation out of production process
and they also short production times.", keywords = "system, cell, intelligent, mechanics, device", volume = "6", number = "7", pages = "1179-6", }
