Abstract: Transesterified vegetable oils (biodiesel) are promising alternative fuel for diesel engines. Used vegetable oils are disposed from restaurants in large quantities. But higher viscosity restricts their direct use in diesel engines. In this study, used cooking oil was dehydrated and then transesterified using an alkaline catalyst. The combustion, performance and emission characteristics of Used Cooking oil Methyl Ester (UCME) and its blends with diesel oil are analysed in a direct injection C.I. engine. The fuel properties and the combustion characteristics of UCME are found to be similar to those of diesel. A minor decrease in thermal efficiency with significant improvement in reduction of particulates, carbon monoxide and unburnt hydrocarbons is observed compared to diesel. The use of transesterified used cooking oil and its blends as fuel for diesel engines will reduce dependence on fossil fuels and also decrease considerably the environmental pollution.
Abstract: In this paper, five options of Iran’s gas flare recovery
have been compared via MCDM method. For developing the model,
the weighing factor of each indicator an AHP method is used via the
Expert-choice software. Several cases were considered in this
analysis. They are defined where the priorities were defined always
keeping one criterion in first position, while the priorities of the other
criteria were defined by ordinal information defining the mutual
relations of the criteria and the respective indicators. The results,
show that amongst these cases, priority is obtained for CHP usage
where availability indicator is highly weighted while the pipeline
usage is obtained where environmental indicator highly weighted and
the injection priority is obtained where economic indicator is highly
weighted and also when the weighing factor of all the criteria are the
same the Injection priority is obtained.
Abstract: The statistical process control (SPC) is one of the most powerful tools developed to assist ineffective control of quality, involves collecting, organizing and interpreting data during production. This article aims to show how the use of CEP industries can control and continuously improve product quality through monitoring of production that can detect deviations of parameters representing the process by reducing the amount of off-specification products and thus the costs of production. This study aimed to conduct a technological forecasting in order to characterize the research being done related to the CEP. The survey was conducted in the databases Spacenet, WIPO and the National Institute of Industrial Property (INPI). Among the largest are the United States depositors and deposits via PCT, the classification section that was presented in greater abundance to F.
Abstract: Facility location problem involves locating a facility
to optimize some performance measures. Location of a public facility
to serve the community, such as a fire station, significantly affects its
service quality. Main objective in locating a fire station is to
minimize the response time, which is the time duration between
receiving a call and reaching the place of incident. In metropolitan
areas, fire vehicles need to cross highways and other traffic obstacles
through some obstacle-overcoming points which delay the response
time. In this paper, fire station location problem is analyzed.
Simulation models are developed for the location problems which
involve obstacles. Particular case problems are analyzed and the
results are presented.
Abstract: In this paper, we propose a novel frequency offset
estimation scheme for orthogonal frequency division multiplexing
(OFDM) systems. By correlating the OFDM signals within the coherence
phase bandwidth and employing a threshold in the frequency
offset estimation process, the proposed scheme is not only robust to
the timing offset but also has a reduced complexity compared with
that of the conventional scheme. Moreover, a timing offset estimation
scheme is also proposed as the next stage of the proposed frequency
offset estimation. Numerical results show that the proposed scheme
can estimate frequency offset with lower computational complexity
and does not require additional memory while maintaining the same
level of estimation performance.
Abstract: One of the essential requirements of a realistic
surgical simulator is to reproduce haptic sensations due to the
interactions in the virtual environment. However, the interaction need
to be performed in real-time, since a delay between the user action
and the system reaction reduces the immersion sensation. In this
paper, a prototype of a coronary stent implant simulator is present;
this system allows real-time interactions with an artery by means of a
specific haptic device. To improve the realism of the simulation, the
building of the virtual environment is based on real patients- images
and a Web Portal is used to search in the geographically remote
medical centres a virtual environment with specific features in terms
of pathology or anatomy. The functional architecture of the system
defines several Medical Centres in which virtual environments built
from the real patients- images and related metadata with specific
features in terms of pathology or anatomy are stored. The searched
data are downloaded from the Medical Centre to the Training Centre
provided with a specific haptic device and with the software
necessary both to manage the interaction in the virtual environment.
After the integration of the virtual environment in the simulation
system it is possible to perform training on the specific surgical
procedure.
Abstract: Coronary artery bypass grafts (CABG) are widely
studied with respect to hemodynamic conditions which play
important role in presence of a restenosis. However, papers which
concern with constitutive modeling of CABG are lacking in the
literature. The purpose of this study is to find a constitutive model for
CABG tissue. A sample of the CABG obtained within an autopsy
underwent an inflation–extension test. Displacements were
recoredered by CCD cameras and subsequently evaluated by digital
image correlation. Pressure – radius and axial force – elongation
data were used to fit material model. The tissue was modeled as onelayered
composite reinforced by two families of helical fibers. The
material is assumed to be locally orthotropic, nonlinear,
incompressible and hyperelastic. Material parameters are estimated
for two strain energy functions (SEF). The first is classical
exponential. The second SEF is logarithmic which allows
interpretation by means of limiting (finite) strain extensibility.
Presented material parameters are estimated by optimization based
on radial and axial equilibrium equation in a thick-walled tube. Both
material models fit experimental data successfully. The exponential
model fits significantly better relationship between axial force and
axial strain than logarithmic one.
Abstract: The aim of this paper is description of the notion of
the death for prisoners and the ways of deal with. They express
indifference, coldness, inability to accept the blame, they have no
shame and no empathy. Is it enough to perform acts verging on the
death. In this paper we described mechanisms and regularities of selfdestructive
behaviour in the view of the relevant literature? The
explanation of the phenomenon is of a biological and sociopsychological
nature. It must be clearly stated that all forms of selfdestructive
behaviour result from various impulses, conflicts and
deficits. That is why they should be treated differently in terms of
motivation and functions which they perform in a given group of
people. Behind self-destruction there seems to be a motivational
mechanism which forces prisoners to rebel and fight against the hated
law and penitentiary systems. The imprisoned believe that pain and
suffering inflicted on them by themselves are better than passive
acceptance of repression. The variety of self-destruction acts is wide,
and some of them take strange forms. We assume that a life-death
barrier is a kind of game for them. If they cannot change the
degrading situation, their life loses sense.
Abstract: Main Memory Database systems (MMDB) store their
data in main physical memory and provide very high-speed access.
Conventional database systems are optimized for the particular
characteristics of disk storage mechanisms. Memory resident
systems, on the other hand, use different optimizations to structure
and organize data, as well as to make it reliable.
This paper provides a brief overview on MMDBs and one of the
memory resident systems named FastDB and compares the
processing time of this system with a typical disc resident database
based on the results of the implementation of TPC benchmarks
environment on both.
Abstract: The purpose of this study was to understand the main
sources of copper (Cu) accumulation in target organs of tilapia
(Oreochromis mossambicus) and to investigate how the organism
mediate the process of Cu accumulation under prolonged conditions.
By measuring both dietary and waterborne Cu accumulation and total
concentrations in tilapia with biokinetic modeling approach, we were
able to clarify the biokinetic coping mechanisms for the long term Cu
accumulation. This study showed that water and food are both the
major source of Cu for the muscle and liver of tilapia. This implied
that control the Cu concentration in these two routes will be correlated
to the Cu bioavailability for tilapia. We found that exposure duration
and level of waterborne Cu drove the Cu accumulation in tilapia. The
ability for Cu biouptake and depuration in organs of tilapia were
actively mediated under prolonged exposure conditions. Generally,
the uptake rate, depuration rate and net bioaccumulation ability in all
selected organs decreased with the increasing level of waterborne Cu
and extension of exposure duration.Muscle tissues accounted for over
50%of the total accumulated Cu and played a key role in buffering the
Cu burden in the initial period of exposure, alternatively, the liver
acted a more important role in the storage of Cu with the extension of
exposures. We concluded that assumption of the constant biokinetic
rates could lead to incorrect predictions with overestimating the
long-term Cu accumulation in ecotoxicological risk assessments.
Abstract: Numerical study of a plane jet occurring in a vertical
heated channel is carried out. The aim is to explore the influence of
the forced flow, issued from a flat nozzle located in the entry section
of a channel, on the up-going fluid along the channel walls. The
Reynolds number based on the nozzle width and the jet velocity
ranges between 3 103 and 2.104; whereas, the Grashof number based
on the channel length and the wall temperature difference is 2.57
1010. Computations are established for a symmetrically heated
channel and various nozzle positions. The system of governing
equations is solved with a finite volumes method. The obtained
results show that the jet-wall interactions activate the heat transfer,
the position variation modifies the heat transfer especially for low
Reynolds numbers: the heat transfer is enhanced for the adjacent
wall; however it is decreased for the opposite one. The numerical
velocity and temperature fields are post-processed to compute the
quantities of engineering interest such as the induced mass flow rate,
and the Nusselt number along the plates.
Abstract: Dust storms are one of the most costly and destructive
events in many desert regions. They can cause massive damages both
in natural environments and human lives. This paper is aimed at
presenting a preliminary study on dust storms, as a major natural
hazard in arid and semi-arid regions. As a case study, dust storm
events occurred in Zabol city located in Sistan Region of Iran was
analyzed to diagnose and predict dust storms. The identification and
prediction of dust storm events could have significant impacts on
damages reduction. Present models for this purpose are complicated
and not appropriate for many areas with poor-data environments. The
present study explores Gamma test for identifying inputs of ANNs
model, for dust storm prediction. Results indicate that more attempts
must be carried out concerning dust storms identification and
segregate between various dust storm types.
Abstract: Some believe that stigma is the worst side effect of the
people who have mental illness. Mental illness researchers have
focused on the influence of mass media on the stigmatization of the
people with mental illness. However, no studies have investigated the
effects of the interactive media, such as blogs, on the stigmatization
of mentally ill people, even though the media have a significant
influence on people in all areas of life. The purpose of this study is to
investigate the use of interactivity in destigmatization of the mentally
ill and the moderating effect of self-construal (independent versus
interdependent self-construal) on the relation between interactivity
and destigmatization. The findings suggested that people in the
human-human interaction condition had less social distance toward
people with mental illness. Additionally, participants with higher
independence showed more favorable affection and less social
distance toward mentally ill people. Finally, direct contact with
mentally ill people increased a person-s positive affect toward people
with mental illness. The current study should provide insights for
mental health practitioners by suggesting how they can use
interactive media to approach the public that stigmatizes the mentally
ill.
Abstract: Long terms variation of solar insolation had been
widely studied. However, its parallel observations in short time scale
is rather lacking. This paper aims to investigate the short time scale
evolution of solar radiation spectrum (UV, PAR, and NIR bands) due
to atmospheric aerosols and water vapors. A total of 25 days of
global and diffused solar spectrum ranges from air mass 2 to 6 were
collected using ground-based spectrometer with shadowband
technique. The result shows that variation of solar radiation is the
least in UV fraction, followed by PAR and the most in NIR. Broader
variations in PAR and NIR are associated with the short time scale
fluctuations of aerosol and water vapors. The corresponding daily
evolution of UV, PAR, and NIR fractions implies that aerosol and
water vapors variation could also be responsible for the deviation
pattern in the Langley-plot analysis.
Abstract: In this article, while it is attempted to describe the
problem and its importance, transformational leadership is studied by considering leadership theories. Issues such as the definition of
transformational leadership and its aspects are compared on the basis of the ideas of various connoisseurs and then it (transformational leadership) is examined in successful and
unsuccessful companies. According to the methodology, the
method of research, hypotheses, population and statistical sample
are investigated and research findings are analyzed by using descriptive and inferential statistical methods in the framework of
analytical tables. Finally, our conclusion is provided by considering the results of statistical tests. The final result shows that
transformational leadership is significantly higher in successful companies than unsuccessful ones P
Abstract: We report on a high-speed quantum cryptography
system that utilizes simultaneous entanglement in polarization and in
“time-bins". With multiple degrees of freedom contributing to the
secret key, we can achieve over ten bits of random entropy per detected coincidence. In addition, we collect from multiple spots o
the downconversion cone to further amplify the data rate, allowing usto achieve over 10 Mbits of secure key per second.
Abstract: Software reliability, defined as the probability of a
software system or application functioning without failure or errors
over a defined period of time, has been an important area of research
for over three decades. Several research efforts aimed at developing
models to improve reliability are currently underway. One of the
most popular approaches to software reliability adopted by some of
these research efforts involves the use of operational profiles to
predict how software applications will be used. Operational profiles
are a quantification of usage patterns for a software application. The
research presented in this paper investigates an innovative multiagent
framework for automatic creation and management of
operational profiles for generic distributed systems after their release
into the market. The architecture of the proposed Operational Profile
MAS (Multi-Agent System) is presented along with detailed
descriptions of the various models arrived at following the analysis
and design phases of the proposed system. The operational profile in
this paper is extended to comprise seven different profiles. Further,
the criticality of operations is defined using a new composed metrics
in order to organize the testing process as well as to decrease the time
and cost involved in this process. A prototype implementation of the
proposed MAS is included as proof-of-concept and the framework is
considered as a step towards making distributed systems intelligent
and self-managing.
Abstract: Optimization is often a critical issue for most system
design problems. Evolutionary Algorithms are population-based,
stochastic search techniques, widely used as efficient global
optimizers. However, finding optimal solution to complex high
dimensional, multimodal problems often require highly
computationally expensive function evaluations and hence are
practically prohibitive. The Dynamic Approximate Fitness based
Hybrid EA (DAFHEA) model presented in our earlier work [14]
reduced computation time by controlled use of meta-models to
partially replace the actual function evaluation by approximate
function evaluation. However, the underlying assumption in
DAFHEA is that the training samples for the meta-model are
generated from a single uniform model. Situations like model
formation involving variable input dimensions and noisy data
certainly can not be covered by this assumption. In this paper we
present an enhanced version of DAFHEA that incorporates a
multiple-model based learning approach for the SVM approximator.
DAFHEA-II (the enhanced version of the DAFHEA framework) also
overcomes the high computational expense involved with additional
clustering requirements of the original DAFHEA framework. The
proposed framework has been tested on several benchmark functions
and the empirical results illustrate the advantages of the proposed
technique.
Abstract: The data measurement of mean velocity has been
taken for the wake of single circular cylinder with three different diameters for two different velocities. The effects of change in
diameter and in velocity are studied in self-similar coordinate system.
The spatial variations of velocity defect and that of the half-width
have been investigated. The results are compared with those
published by H.Schlichting. In the normalized coordinates, it is also observed that all cases except for the first station are self-similar. By attention to self-similarity profiles of mean velocity, it is observed for all the cases at the each station curves tend to zero at a same point.
Abstract: Vertical ZnO nanowire array films were synthesized
based on aqueous method for sensing applications. ZnO nanowires
were investigated structurally using X-ray diffraction (XRD) and
scanning electron microscopy (SEM). The gas-sensing properties of
ZnO nanowires array films are studied. It is found that the ZnO
nanowires array film sensor exhibits excellent sensing properties
towards O2 and CO2 at 100 °C with the response time shorter than 5
s. High surface area / volume ratio of vertical ZnO nanowire and high
mobility accounts for the fast response and recovery. The sensor
response was measured in the range from 100 to 500 ppm O2 and CO2
in this study.