Abstract: Rainfall data at fine resolution and knowledge of its
characteristics plays a major role in the efficient design and operation
of agricultural, telecommunication, runoff and erosion control as well
as water quality control systems. The paper is aimed to study the
statistical distribution of hourly rainfall depth for 12 representative
stations spread across Peninsular Malaysia. Hourly rainfall data of 10
to 22 years period were collected and its statistical characteristics
were estimated. Three probability distributions namely, Generalized
Pareto, Exponential and Gamma distributions were proposed to
model the hourly rainfall depth, and three goodness-of-fit tests,
namely, Kolmogorov-Sminov, Anderson-Darling and Chi-Squared
tests were used to evaluate their fitness. Result indicates that the east
cost of the Peninsular receives higher depth of rainfall as compared
to west coast. However, the rainfall frequency is found to be
irregular. Also result from the goodness-of-fit tests show that all the
three models fit the rainfall data at 1% level of significance.
However, Generalized Pareto fits better than Exponential and
Gamma distributions and is therefore recommended as the best fit.
Abstract: Experimental investigations were made on the instability of supercritical kerosene flowing in active cooling channels. Two approaches were used to control the pressure in the channel. One is the back-pressure valve while the other is the venturi. In both conditions, a kind of low-frequency oscillation of pressure and temperature is observed. And the oscillation periods are calculated. By comparison with the flow time, it is concluded that the instability occurred in active cooling channels is probably one kind of density wave instability. And its period has no relationship with the cooling channel geometry, nor the pressure, but only depends on the flow time of kerosene in active cooling channels. When the mass flow rate, density and pressure drop couple with each other, the density wave instability will appear.
Abstract: To achieve the desired specifications of gain and
phase margins for plants with time-delay that stabilized with FO-PID
controller a lead compensator is designed. At first the range of
controlled system stability based on stability boundary criteria is
determined. Using stability boundary locus method in frequency
domain the fractional order controller parameters are tuned and then
with drawing bode diagram in frequency domain accessing to desired
gain and phase margin are shown. Numerical examples are given to
illustrate the shapes of the stabilizing region and to show the design
procedure.
Abstract: This paper is concerned with propagation of thermoelastic longitudinal vibrations of an infinite circular cylinder, in the context of the linear theory of generalized thermoelasticity with two relaxation time parameters (Green and Lindsay theory). Three displacement potential functions are introduced to uncouple the equations of motion. The frequency equation, by using the traction free boundary conditions, is given in the form of a determinant involving Bessel functions. The roots of the frequency equation give the value of the characteristic circular frequency as function of the wave number. These roots, which correspond to various modes, are numerically computed and presented graphically for different values of the thermal relaxation times. It is found that the influences of the thermal relaxation times on the amplitudes of the elastic and thermal waves are remarkable. Also, it is shown in this study that the propagation of thermoelastic longitudinal vibrations based on the generalized thermoelasticity can differ significantly compared with the results under the classical formulation. A comparison of the results for the case with no thermal effects shows well agreement with some of the corresponding earlier results.
Abstract: In the last 15 years, a number of methods have been proposed for forecasting based on fuzzy time series. Most of the fuzzy time series methods are presented for forecasting of enrollments at the University of Alabama. However, the forecasting accuracy rates of the existing methods are not good enough. In this paper, we compared our proposed new method of fuzzy time series forecasting with existing methods. Our method is based on frequency density based partitioning of the historical enrollment data. The proposed method belongs to the kth order and time-variant methods. The proposed method can get the best forecasting accuracy rate for forecasting enrollments than the existing methods.
Abstract: This paper investigates the occurrence of regenerative
chatter vibrations in facing and turning processes. Orthogonal turning
(facing) and normal turning experiments are carried out under stable
as well as in the presence of controlled chatter vibrations. The effects
of chatter vibrations on various sensor signals are captured and
analyzed using frequency domain methods, which successfully
detected the chatter vibrations close to the dominant mode of the
machine tool system.
Abstract: The purpose of this paper was to study motivation
factors affecting job performance effectiveness. This paper drew
upon data collected from an Internal Audit Staffs of Internal Audit
Line of Head Office of Krung Thai Public Company Limited.
Statistics used included frequency, percentage, mean and standard
deviation, t-test, and one-way ANOVA test. The finding revealed that
the majority of the respondents were female of 46 years of age and
over, married and live together, hold a bachelor degree, with an
average monthly income over 70,001 Baht. The majority of
respondents had over 15 years of work experience. They generally
had high working motivation as well as high job performance
effectiveness.
The hypotheses testing disclosed that employees with different
working status had different level of job performance effectiveness at
a 0.01 level of significance. Working motivation factors had an effect
on job performance in the same direction with high level. Individual
working motivation included working completion, reorganization,
working progression, working characteristic, opportunity,
responsibility, management policy, supervision, relationship with
their superior, relationship with co-worker, working position,
working stability, safety, privacy, working conditions, and payment.
All of these factors related to job performance effectiveness in the
same direction with medium level.
Abstract: Photoplethysmography is a simple measurement of the
variation in blood volume in tissue. It detects the pulse signal of heart
beat as well as the low frequency signal of vasoconstriction and
vasodilation. The transmission type measurement is limited to only a
few specific positions for example the index finger that have a short
path length for light. The reflectance type measurement can be
conveniently applied on most parts of the body surface. This study
analyzed the factors that determine the quality of reflectance
photoplethysmograph signal including the emitter-detector distance,
wavelength, light intensity, and optical properties of skin tissue.
Light emitting diodes (LEDs) with four different visible
wavelengths were used as the light emitters. A phototransistor was
used as the light detector. A micro translation stage adjusts the
emitter-detector distance from 2 mm to 15 mm.
The reflective photoplethysmograph signals were measured on
different sites. The optimal emitter-detector distance was chosen to
have a large dynamic range for low frequency drifting without signal
saturation and a high perfusion index. Among these four wavelengths,
a yellowish green (571nm) light with a proper emitter-detection
distance of 2mm is the most suitable for obtaining a steady and reliable
reflectance photoplethysmograph signal
Abstract: A method based on the power series solution is proposed to solve the natural frequency of flapping vibration for the rotating inclined Euler beam with constant angular velocity. The vibration of the rotating beam is measured from the position of the corresponding steady state axial deformation. In this paper the governing equations for linear vibration of a rotating Euler beam are derived by the d'Alembert principle, the virtual work principle and the consistent linearization of the fully geometrically nonlinear beam theory in a rotating coordinate system. The governing equation for flapping vibration of the rotating inclined Euler beam is linear ordinary differential equation with variable coefficients and is solved by a power series with four independent coefficients. Substituting the power series solution into the corresponding boundary conditions at two end nodes of the rotating beam, a set of homogeneous equations can be obtained. The natural frequencies may be determined by solving the homogeneous equations using the bisection method. Numerical examples are studied to investigate the effect of inclination angle on the natural frequency of flapping vibration for rotating inclined Euler beams with different angular velocity and slenderness ratio.
Abstract: Global environmental changes lead to increased frequency and scale of natural disaster, Taiwan is under the influence of global warming and extreme weather. Therefore, the vulnerability was increased and variability and complexity of disasters is relatively enhanced. The purpose of this study is to consider the source and magnitude of hazard characteristics on the tourism industry. Using modern risk management concepts, integration of related domestic and international basic research, this goes beyond the Taiwan typhoon disaster risk assessment model and evaluation of loss. This loss evaluation index system considers the impact of extreme weather, in particular heavy rain on the tourism industry in Taiwan. Consider the extreme climate of the compound impact of disaster for the tourism industry; we try to make multi-hazard risk assessment model, strategies and suggestions. Related risk analysis results are expected to provide government department, the tourism industry asset owners, insurance companies and banking include tourist disaster risk necessary information to help its tourism industry for effective natural disaster risk management.
Abstract: The experimental and theoretical results of a ZVS
(Zero Voltage Switching) isolated flyback DC-DC converter using
multilayered coreless PCB step down 2:1 transformer are presented.
The performance characteristics of the transformer are shown which
are useful for the parameters extraction. The measured energy
efficiency of the transformer is found to be more than 94% with the
sinusoidal input voltage excitation. The designed flyback converter
has been tested successfully upto the output power level of 10W,
with a switching frequency in the range of 2.7MHz-4.3MHz. The
input voltage of the converter is varied from 25V-40V DC.
Frequency modulation technique is employed by maintaining
constant off time to regulate the output voltage of the converter. The
energy efficiency of the isolated flyback converter circuit under ZVS
condition in the MHz frequency region is found to be approximately
in the range of 72-84%. This paper gives the comparative results in
terms of the energy efficiency of the hard switched and soft switched
flyback converter in the MHz frequency region.
Abstract: In this paper, the design of a multiple U-slotted microstrip patch antenna with frequency selective surface (FSS) as a superstrate for WLAN and WiMAX applications is presented. The proposed antenna is designed by using substrate FR4 having permittivity of 4.4 and air substrate. The characteristics of the antenna are designed and evaluated the performance of modelled antenna using CST Microwave studio. The proposed antenna dual resonant frequency has been achieved in the band of 2.37-2.55 GHz and 3.4-3.6 GHz. Because of the impact of FSS superstrate, it is found that the bandwidths have been improved from 6.12% to 7.35 % and 3.7% to 5.7% at resonant frequencies 2.45 GHz and 3.5 GHz, respectively. The maximum gain at the resonant frequency of 2.45 and 3.5 GHz are 9.3 and 11.33 dBi, respectively.
Abstract: This paper presents a systematic approach for designing Unified Power Flow Controller (UPFC) based supplementary damping controllers for damping low frequency oscillations in a single-machine infinite-bus power system. Detailed investigations have been carried out considering the four alternatives UPFC based damping controller namely modulating index of series inverter (mB), modulating index of shunt inverter (mE), phase angle of series inverter (δB ) and phase angle of the shunt inverter (δE ). The design problem of the proposed controllers is formulated as an optimization problem and Real- Coded Genetic Algorithm (RCGA) is employed to optimize damping controller parameters. Simulation results are presented and compared with a conventional method of tuning the damping controller parameters to show the effectiveness and robustness of the proposed design approach.
Abstract: This paper presents a procedure for modeling and tuning the parameters of Thyristor Controlled Series Compensation (TCSC) controller in a multi-machine power system to improve transient stability. First a simple transfer function model of TCSC controller for stability improvement is developed and the parameters of the proposed controller are optimally tuned. Genetic algorithm (GA) is employed for the optimization of the parameter-constrained nonlinear optimization problem implemented in a simulation environment. By minimizing an objective function in which the oscillatory rotor angle deviations of the generators are involved, transient stability performance of the system is improved. The proposed TCSC controller is tested on a multi-machine system and the simulation results are presented. The nonlinear simulation results validate the effectiveness of proposed approach for transient stability improvement in a multimachine power system installed with a TCSC. The simulation results also show that the proposed TCSC controller is also effective in damping low frequency oscillations.
Abstract: This paper presents an ESN-based Arabic phoneme
recognition system trained with supervised, forced and combined
supervised/forced supervised learning algorithms. Mel-Frequency
Cepstrum Coefficients (MFCCs) and Linear Predictive Code (LPC)
techniques are used and compared as the input feature extraction
technique. The system is evaluated using 6 speakers from the King
Abdulaziz Arabic Phonetics Database (KAPD) for Saudi Arabia
dialectic and 34 speakers from the Center for Spoken Language
Understanding (CSLU2002) database of speakers with different
dialectics from 12 Arabic countries. Results for the KAPD and
CSLU2002 Arabic databases show phoneme recognition
performances of 72.31% and 38.20% respectively.
Abstract: In this paper, a mathematical model for data object replication in ad hoc networks is formulated. The derived model is general, flexible and adaptable to cater for various applications in ad hoc networks. We propose a game theoretical technique in which players (mobile hosts) continuously compete in a non-cooperative environment to improve data accessibility by replicating data objects. The technique incorporates the access frequency from mobile hosts to each data object, the status of the network connectivity, and communication costs. The proposed technique is extensively evaluated against four well-known ad hoc network replica allocation methods. The experimental results reveal that the proposed approach outperforms the four techniques in both the execution time and solution quality
Abstract: Selected Mapping (SLM) is a PAPR reduction technique, which converts the OFDM signal into several independent signals by multiplication with the phase sequence set and transmits one of the signals with lowest PAPR. But it requires the index of the selected signal i.e. side information (SI) to be transmitted with each OFDM symbol. The PAPR reduction capability of the SLM scheme depends on the selection of phase sequence set. In this paper, we have proposed a new phase sequence set generation scheme based on M-ary chaotic sequence and a mapping scheme to map quaternary data to concentric circle constellation (CCC) is used. It is shown that this method does not require SI and provides better SER performance with good PAPR reduction capability as compared to existing SLMOFDM methods.
Abstract: Neural processors have shown good results for
detecting a certain character in a given input matrix. In this paper, a
new idead to speed up the operation of neural processors for character
detection is presented. Such processors are designed based on cross
correlation in the frequency domain between the input matrix and the
weights of neural networks. This approach is developed to reduce the
computation steps required by these faster neural networks for the
searching process. The principle of divide and conquer strategy is
applied through image decomposition. Each image is divided into
small in size sub-images and then each one is tested separately by
using a single faster neural processor. Furthermore, faster character
detection is obtained by using parallel processing techniques to test the
resulting sub-images at the same time using the same number of faster
neural networks. In contrast to using only faster neural processors, the
speed up ratio is increased with the size of the input image when using
faster neural processors and image decomposition. Moreover, the
problem of local subimage normalization in the frequency domain is
solved. The effect of image normalization on the speed up ratio of
character detection is discussed. Simulation results show that local
subimage normalization through weight normalization is faster than
subimage normalization in the spatial domain. The overall speed up
ratio of the detection process is increased as the normalization of
weights is done off line.
Abstract: A modified Genetic Algorithm (GA) based optimal selection of parameters for Automatic Generation Control (AGC) of multi-area electric energy systems is proposed in this paper. Simulations on multi-area reheat thermal system with and without consideration of nonlinearity like governor dead band followed by 1% step load perturbation is performed to exemplify the optimum parameter search. In this proposed method, a modified Genetic Algorithm is proposed where one point crossover with modification is employed. Positional dependency in respect of crossing site helps to maintain diversity of search point as well as exploitation of already known optimum value. This makes a trade-off between exploration and exploitation of search space to find global optimum in less number of generations. The proposed GA along with decomposition technique as developed has been used to obtain the optimum megawatt frequency control of multi-area electric energy systems. Time-domain simulations are conducted with trapezoidal integration along with decomposition technique. The superiority of the proposed method over existing one is verified from simulations and comparisons.
Abstract: This research deals with investigations on the “Active
Generator" under rotor speed variations and output frequency
control. It runs at turbine speed and it is connected to a three phase
electrical power grid which has its own frequency different from
turbine frequency. In this regard the set composed of a four phase
synchronous generator and a natural commutated matrix converter
(NCMC) made with thyristors, is called active generator. It replaces a
classical mechanical gearbox which introduces many drawbacks. The
main idea in this article is the presentation of frequency control at
grid side when turbine runs at variable speed. Frequency control has
been done by linear and step variations of the turbine speed. Relation
between turbine speed (frequency) and main grid zero sequence
voltage frequency is presented.