Abstract: The association between emotional inhibition strategies linked to depression has been showed inconsistent among studies. Mild emotional inhibition maybe benefit for social interaction, especially for female among East Asian cultures. The present study aimed to examine whether the inhibition–depression relationship is dependent on level of emotion inhibition and gender context, given differing value of suppressing emotional displays. We hypothesized that the negative associations between inhibition and adolescent depression would not directly, in which affected by interaction between emotion inhibition and gender. To test this hypothesis, we asked 309 junior high school students which age range from 12 to14 years old to report on their use of emotion inhibition and depression syndrome. A multiple regressions analysis revealed that significant interaction that gender as a moderator to the relationships between emotion inhibition and adolescent depression. The group with the highest level of depression was girls with high levels of emotion inhibition, whose depression score was higher than that of boys with high levels of emotion inhibition. The result highlights that the importance of context in understanding the inhibition-depression relationship.
Abstract: Shape memory alloy (SMA) actuators have found a
wide range of applications due to their unique properties such as high
force, small size, lightweight and silent operation. This paper presents
the development of compact (SMA) actuator and cooling system in
one unit. This actuator is developed for multi-fingered hand. It
consists of nickel-titanium (Nitinol) SMA wires in compact forming.
The new arrangement insulates SMA wires from the human body by
housing it in a heat sink and uses a thermoelectric device for rejecting
heat to improve the actuator performance. The study uses
optimization methods for selecting the SMA wires geometrical
parameters and the material of a heat sink. The experimental work
implements the actuator prototype and measures its response.
Abstract: This paper observed the interhemispheric conjugate
auroral activity occurred on 21 September 2009. The GPS derived
ionospheric total electron content (TEC) during a weak substorm
interval recorded at interhemispheric conjugate points at Husafell in
Iceland and Syowa in Antarctica is investigated to look at their
signatures on the auroral features. Selection of all-sky camera (ASC)
images and keogram at Tjörnes and Syowa during the interval
00:47:54 – 00:50:14 UT on 21 September 2009 found that the auroral
activity had exerted their influence on the GPS TEC as a
consequence of varying interplanetary magnetic field (IMF) By
polarity.
Abstract: Support vector regression (SVR) has been regarded
as a state-of-the-art method for approximation and regression. The
importance of kernel function, which is so-called admissible support
vector kernel (SV kernel) in SVR, has motivated many studies
on its composition. The Gaussian kernel (RBF) is regarded as a
“best" choice of SV kernel used by non-expert in SVR, whereas
there is no evidence, except for its superior performance on some
practical applications, to prove the statement. Its well-known that
reproducing kernel (R.K) is also a SV kernel which possesses many
important properties, e.g. positive definiteness, reproducing property
and composing complex R.K by simpler ones. However, there are a
limited number of R.Ks with explicit forms and consequently few
quantitative comparison studies in practice. In this paper, two R.Ks,
i.e. SV kernels, composed by the sum and product of a translation
invariant kernel in a Sobolev space are proposed. An exploratory
study on the performance of SVR based general R.K is presented
through a systematic comparison to that of RBF using multiple
criteria and synthetic problems. The results show that the R.K is
an equivalent or even better SV kernel than RBF for the problems
with more input variables (more than 5, especially more than 10) and
higher nonlinearity.
Abstract: This paper focuses on developing an integrated
reliable and sophisticated model for ultra large wind turbines And to
study the performance and analysis of vector control on large wind
turbines. With the advance of power electronics technology, direct
driven multi-pole radial flux PMSG (Permanent Magnet Synchronous
Generator) has proven to be a good choice for wind turbines
manufacturers. To study the wind energy conversion systems, it is
important to develop a wind turbine simulator that is able to produce
realistic and validated conditions that occur in real ultra MW wind
turbines. Three different packages are used to simulate this model,
namely, Turbsim, FAST and Simulink. Turbsim is a Full field wind
simulator developed by National Renewable Energy Laboratory
(NREL). The wind turbine mechanical parts are modeled by FAST
(Fatigue, Aerodynamics, Structures and Turbulence) code which is
also developed by NREL. Simulink is used to model the PMSG, full
scale back to back IGBT converters, and the grid.
Abstract: Electro Chemical Discharge Machining (ECDM) is an
emerging hybrid machining process used in precision machining of hard and brittle non-conducting materials. The present paper gives a
critical review on materials machined by ECDM under the prevailing machining conditions; capability indicators of the process are
reported. Some results obtained while performing experiments in micro-channeling on soda lime glass using ECDM are also presented. In these experiments, Tool Wear (TW) and Material Removal (MR)
were studied using design of experiments and L–4 orthogonal array. Experimental results showed that the applied voltage was the most influencing parameter in both MR and TW studies. Field
emission scanning electron microscopy (FESEM) results obtained on the microchannels confirmed the presence of micro-cracks, primarily responsible for MR. Chemical etching was also seen along the edges.
The Energy dispersive spectroscopy (EDS) results were used to detect the elements present in the debris and specimens.
Abstract: In this study, the Multi-Layer Perceptron (MLP)with Back-Propagation learning algorithm are used to classify to effective diagnosis Parkinsons disease(PD).It-s a challenging problem for medical community.Typically characterized by tremor, PD occurs due to the loss of dopamine in the brains thalamic region that results in involuntary or oscillatory movement in the body. A feature selection algorithm along with biomedical test values to diagnose Parkinson disease.Clinical diagnosis is done mostly by doctor-s expertise and experience.But still cases are reported of wrong diagnosis and treatment. Patients are asked to take number of tests for diagnosis.In many cases,not all the tests contribute towards effective diagnosis of a disease.Our work is to classify the presence of Parkinson disease with reduced number of attributes.Original,22 attributes are involved in classify.We use Information Gain to determine the attributes which reduced the number of attributes which is need to be taken from patients.The Artificial neural networks is used to classify the diagnosis of patients.Twenty-Two attributes are reduced to sixteen attributes.The accuracy is in training data set is 82.051% and in the validation data set is 83.333%.
Abstract: The flow field over a three dimensional pole barn
characterized by a cylindrical roof has been numerically investigated.
Wind pressure and viscous loads acting on the agricultural building
have been analyzed for several incoming wind directions, so as to
evaluate the most critical load condition on the structure. A constant
wind velocity profile, based on the maximum reference wind speed in
the building site (peak gust speed worked out for 50 years return
period) and on the local roughness coefficient, has been simulated.
In order to contemplate also the hazard due to potential air
wedging between the stored hay and the lower part of the ceiling, the
effect of a partial filling of the barn has been investigated.
The distribution of wind-induced loads on the structure have been
determined, allowing a numerical quantification of the effect of wind
direction on the induced stresses acting on a hemicylindrical roof.
Abstract: Tensile armour wires provide a flexible pipe's
resistance to longitudinal stresses. Flexible pipe manufacturers need
to know the effect of defects such as scratches and cracks, with
dimensions less than 0.2mm which is the limit of the current nondestructive
detection technology, on the fracture stress and fracture
strain of the wire for quality assurance purposes. Recent research
involving the determination of the fracture strength of cracked wires
employed laboratory testing and classical fracture mechanics
approach using non-standardised fracture mechanics specimens
because standard test specimens could not be manufactured from the
wires owing to their sizes. In this work, the effect of miniature
cracks on the fracture properties of tensile armour wires was
investigated using laboratory and finite element tensile testing
simulations with the phenomenological shear fracture model. The
investigation revealed that the presence of cracks shallower than
0.2mm is worse on the fracture strain of the wire.
Abstract: It is observed that the Weighted least-square (WLS)
technique, including the modifications, results in equiripple error
curve. The resultant error as a percent of the ideal value is highly
non-uniformly distributed over the range of frequencies for which the
differentiator is designed. The present paper proposes a modification
to the technique so that the optimization procedure results in lower
maximum relative error compared to the ideal values. Simulation
results for first order as well as higher order differentiators are given
to illustrate the excellent performance of the proposed method.
Abstract: A novel circuit for generating a signal embedded with
features about data from three sensors is presented. This suggested
circuit is making use of a resistance-to-time converter employing a
bridge amplifier, an integrator and a comparator. The second resistive
sensor (Rz) is transformed into duty cycle. Another bridge with
varying resistor, (Ry) in the feedback of an OP AMP is added in
series to change the amplitude of the resulting signal in a proportional
relationship while keeping the same frequency and duty cycle
representing proportional changes in resistors Rx and Rz already
mentioned. The resultant output signal carries three types of
information embedded as variations of its frequency, duty cycle and
amplitude.
Abstract: The effects of divers carbon substrates were
investigated for the tabtoxin production of an isolated pathogenic
Pseudomonas syringae pv. tabaci, the causal agent of wildfire of
tobacco and are discussed in relation to the bacterium growth. The
isolated organism was grown in batch culture on Woolley's
medium (28°C, 200 rpm, during 5 days). The growth has been
measured by the optical density (OD) at 620 nm and the tabtoxin
production quantified by Escherichia coli (K-12) bioassay
technique. The growth and the tabtoxin production were both
influenced by the substrates (sugars, amino acids, organic acids)
used, each, as a sole carbon source and as a supplement for the
same amino acids. The most significant quantities of tabtoxin were
obtained in presence of some amino acids used as sole carbon
source and/or as supplement.
Abstract: This paper will discuss about an active power generator scheduling method in order to increase the limit level of steady state systems. Some power generator optimization methods such as Langrange, PLN (Indonesian electricity company) Operation, and the proposed Z-Thevenin-based method will be studied and compared in respect of their steady state aspects. A method proposed in this paper is built upon the thevenin equivalent impedance values between each load respected to each generator. The steady state stability index obtained with the REI DIMO method. This research will review the 500kV-Jawa-Bali interconnection system. The simulation results show that the proposed method has the highest limit level of steady state stability compared to other optimization techniques such as Lagrange, and PLN operation. Thus, the proposed method can be used to create the steady state stability limit of the system especially in the peak load condition.
Abstract: In this research, CaO-ZnO catalysts (with various
Ca:Zn atomic ratios of 1:5, 1:3, 1:1, and 3:1) prepared by incipientwetness
impregnation (IWI) and co-precipitation (CP) methods were
used as a catalyst in the transesterification of palm oil with methanol
for biodiesel production. The catalysts were characterized by several
techniques, including BET method, CO2-TPD, and Hemmett
Indicator. The effects of precursor concentration, and calcination
temperature on the catalytic performance were studied under reaction
conditions of a 15:1 methanol to oil molar ratio, 6 wt% catalyst,
reaction temperature of 60°C, and reaction time of 8 h. At Ca:Zn
atomic ratio of 1:3 gave the highest FAME value owing to a basic
properties and surface area of the prepared catalyst.
Abstract: This paper reports the results of an experimental work
conducted to investigate the effect of curing conditions on the
compressive strength of self-compacting geopolymer concrete
prepared by using fly ash as base material and combination of sodium
hydroxide and sodium silicate as alkaline activator. The experiments
were conducted by varying the curing time and curing temperature in
the range of 24-96 hours and 60-90°C respectively. The essential
workability properties of freshly prepared Self-compacting
Geopolymer concrete such as filling ability, passing ability and
segregation resistance were evaluated by using Slump flow,
V-funnel, L-box and J-ring test methods. The fundamental
requirements of high flowability and resistance to segregation as
specified by guidelines on Self-compacting Concrete by EFNARC
were satisfied. Test results indicate that longer curing time and curing
the concrete specimens at higher temperatures result in higher
compressive strength. There was increase in compressive strength
with the increase in curing time; however increase in compressive
strength after 48 hours was not significant. Concrete specimens cured
at 70°C produced the highest compressive strength as compared to
specimens cured at 60°C, 80°C and 90°C.
Abstract: NFκB is a transcription factor regulating many
function of the vessel wall. In the normal condition , NFκB is
revealed diffuse cytoplasmic expressionsuggesting that the system is
inactive. The presence of activation NFκB provide a potential
pathway for the rapid transcriptional of a variety of genes encoding
cytokines, growth factors, adhesion molecules and procoagulatory
factors. It is likely to play an important role in chronic inflamatory
disease involved atherosclerosis. There are many stimuli with the
potential to active NFκB, including hyperlipidemia. We used 24 mice
which was divided in 6 groups. The HFD given by et libitum
procedure during 2, 4, and 6 months. The parameters in this study
were the amount of NFKB activation ,H2O2 as ROS and VCAM-1 as
a product of NFKB activation. H2O2 colorimetryc assay performed
directly using Anti Rat H2O2 ELISA Kit. The NFKB and VCAM-1
detection obtained from aorta mice, measured by ELISA kit and
imunohistochemistry. There was a significant difference activation of
H2O2, NFKB and VCAM-1 level at induce HFD after 2, 4 and 6
months. It suggest that HFD induce ROS formation and increase the
activation of NFKB as one of atherosclerosis marker that caused by
hyperlipidemia as classical atheroschlerosis risk factor.
Abstract: Fecal coliform bacteria are widely used as indicators of
sewage contamination in surface water. However, there are some
disadvantages in these microbial techniques including time consuming
(18-48h) and inability in discriminating between human and animal
fecal material sources. Therefore, it is necessary to seek a more
specific indicator of human sanitary waste. In this study, the feasibility
was investigated to apply caffeine and human pharmaceutical
compounds to identify the human-source contamination. The
correlation between caffeine and fecal coliform was also explored.
Surface water samples were collected from upstream, middle-stream
and downstream points respectively, along Rochor Canal, as well as 8
locations of Marina Bay. Results indicate that caffeine is a suitable
chemical tracer in Singapore because of its easy detection (in the range
of 0.30-2.0 ng/mL), compared with other chemicals monitored.
Relative low concentrations of human pharmaceutical compounds (<
0.07 ng/mL) in Rochor Canal and Marina Bay water samples make
them hard to be detected and difficult to be chemical tracer. However,
their existence can help to validate sewage contamination. In addition,
it was discovered the high correlation exists between caffeine
concentration and fecal coliform density in the Rochor Canal water
samples, demonstrating that caffeine is highly related to the
human-source contamination.
Abstract: Fair share is one of the scheduling objectives supported on many production systems. However, fair share has been shown to cause performance problems for some users, especially the users with difficult jobs. This work is focusing on extending goaloriented parallel computer job scheduling policies to cover the fair share objective. Goal-oriented parallel computer job scheduling policies have been shown to achieve good scheduling performances when conflicting objectives are required. Goal-oriented policies achieve such good performance by using anytime combinatorial search techniques to find a good compromised schedule within a time limit. The experimental results show that the proposed goal-oriented parallel computer job scheduling policy (namely Tradeofffs( Tw:avgX)) achieves good scheduling performances and also provides good fair share performance.
Abstract: This paper fist examines three set of bivariate cointegrations between any two of current accounts, stock markets, and currency exchange markets in ten Asian countries. Furthermore, we examined the effect of country characters on this bivariate cointegration. Our findings suggest that for three sets of cointegration test, each sample country at least exists one cointegration. India consistently exhibited a bi-directional causal relationship between any two of three indicators. Unlike Pan et al. (2007) and Phylaktis and Ravazzolo (2005), we found that such cointegration is influenced by three characteristics: capital control; flexibility in foreign exchange rates; and the ratio of trade to GDP. These characteristics are the result of liberalization in each Asian country. This implies that liberalization policies are effective on improving the cointegration between any two of financial markets and current account for ten Asian countries.
Abstract: In this paper, a new approach for design of a fully
differential second order current mode continuous-time sigma-delta
modulator is presented. For circuit implementation, square root
domain (SRD) translinear loop based on floating-gate MOS
transistors that operate in saturation region is employed. The
modulator features, low supply voltage, low power consumption
(8mW) and high dynamic range (55dB). Simulation results confirm
that this design is suitable for data converters.