Abstract: Nowadays, with the emerging of the new applications
like robot control in image processing, artificial vision for visual
servoing is a rapidly growing discipline and Human-machine
interaction plays a significant role for controlling the robot. This
paper presents a new algorithm based on spatio-temporal volumes for
visual servoing aims to control robots. In this algorithm, after
applying necessary pre-processing on video frames, a spatio-temporal
volume is constructed for each gesture and feature vector is extracted.
These volumes are then analyzed for matching in two consecutive
stages. For hand gesture recognition and classification we tested
different classifiers including k-Nearest neighbor, learning vector
quantization and back propagation neural networks. We tested the
proposed algorithm with the collected data set and results showed the
correct gesture recognition rate of 99.58 percent. We also tested the
algorithm with noisy images and algorithm showed the correct
recognition rate of 97.92 percent in noisy images.
Abstract: Transesterified vegetable oils (biodiesel) are promising alternative fuel for diesel engines. Used vegetable oils are disposed from restaurants in large quantities. But higher viscosity restricts their direct use in diesel engines. In this study, used cooking oil was dehydrated and then transesterified using an alkaline catalyst. The combustion, performance and emission characteristics of Used Cooking oil Methyl Ester (UCME) and its blends with diesel oil are analysed in a direct injection C.I. engine. The fuel properties and the combustion characteristics of UCME are found to be similar to those of diesel. A minor decrease in thermal efficiency with significant improvement in reduction of particulates, carbon monoxide and unburnt hydrocarbons is observed compared to diesel. The use of transesterified used cooking oil and its blends as fuel for diesel engines will reduce dependence on fossil fuels and also decrease considerably the environmental pollution.
Abstract: Current advancements in nanotechnology are dependent on the capabilities that can enable nano-scientists to extend their eyes and hands into the nano-world. For this purpose, a haptics (devices capable of recreating tactile or force sensations) based system for AFM (Atomic Force Microscope) is proposed. The system enables the nano-scientists to touch and feel the sample surfaces, viewed through AFM, in order to provide them with better understanding of the physical properties of the surface, such as roughness, stiffness and shape of molecular architecture. At this stage, the proposed work uses of ine images produced using AFM and perform image analysis to create virtual surfaces suitable for haptics force analysis. The research work is in the process of extension from of ine to online process where interaction will be done directly on the material surface for realistic analysis.
Abstract: In this work, we present for the first time in our perception an efficient digital watermarking scheme for mpeg audio layer 3 files that operates directly in the compressed data domain, while manipulating the time and subband/channel domain. In addition, it does not need the original signal to detect the watermark. Our scheme was implemented taking special care for the efficient usage of the two limited resources of computer systems: time and space. It offers to the industrial user the capability of watermark embedding and detection in time immediately comparable to the real music time of the original audio file that depends on the mpeg compression, while the end user/audience does not face any artifacts or delays hearing the watermarked audio file. Furthermore, it overcomes the disadvantage of algorithms operating in the PCMData domain to be vulnerable to compression/recompression attacks, as it places the watermark in the scale factors domain and not in the digitized sound audio data. The strength of our scheme, that allows it to be used with success in both authentication and copyright protection, relies on the fact that it gives to the users the enhanced capability their ownership of the audio file not to be accomplished simply by detecting the bit pattern that comprises the watermark itself, but by showing that the legal owner knows a hard to compute property of the watermark.
Abstract: In this paper, five options of Iran’s gas flare recovery
have been compared via MCDM method. For developing the model,
the weighing factor of each indicator an AHP method is used via the
Expert-choice software. Several cases were considered in this
analysis. They are defined where the priorities were defined always
keeping one criterion in first position, while the priorities of the other
criteria were defined by ordinal information defining the mutual
relations of the criteria and the respective indicators. The results,
show that amongst these cases, priority is obtained for CHP usage
where availability indicator is highly weighted while the pipeline
usage is obtained where environmental indicator highly weighted and
the injection priority is obtained where economic indicator is highly
weighted and also when the weighing factor of all the criteria are the
same the Injection priority is obtained.
Abstract: This paper presents an efficient method of obtaining a straight-line motion in the tool configuration space using an articulated robot between two specified points. The simulation results & the implementation results show the effectiveness of the method.
Abstract: Multi-dimensional principal component analysis
(PCA) is the extension of the PCA, which is used widely as the
dimensionality reduction technique in multivariate data analysis, to
handle multi-dimensional data. To calculate the PCA the singular
value decomposition (SVD) is commonly employed by the reason of
its numerical stability. The multi-dimensional PCA can be calculated
by using the higher-order SVD (HOSVD), which is proposed by
Lathauwer et al., similarly with the case of ordinary PCA. In this
paper, we apply the multi-dimensional PCA to the multi-dimensional
medical data including the functional independence measure (FIM)
score, and describe the results of experimental analysis.
Abstract: The statistical process control (SPC) is one of the most powerful tools developed to assist ineffective control of quality, involves collecting, organizing and interpreting data during production. This article aims to show how the use of CEP industries can control and continuously improve product quality through monitoring of production that can detect deviations of parameters representing the process by reducing the amount of off-specification products and thus the costs of production. This study aimed to conduct a technological forecasting in order to characterize the research being done related to the CEP. The survey was conducted in the databases Spacenet, WIPO and the National Institute of Industrial Property (INPI). Among the largest are the United States depositors and deposits via PCT, the classification section that was presented in greater abundance to F.
Abstract: Several works regarding facial recognition have dealt with methods which identify isolated characteristics of the face or with templates which encompass several regions of it. In this paper a new technique which approaches the problem holistically dispensing with the need to identify geometrical characteristics or regions of the face is introduced. The characterization of a face is achieved by randomly sampling selected attributes of the pixels of its image. From this information we construct a set of data, which correspond to the values of low frequencies, gradient, entropy and another several characteristics of pixel of the image. Generating a set of “p" variables. The multivariate data set with different polynomials minimizing the data fitness error in the minimax sense (L∞ - Norm) is approximated. With the use of a Genetic Algorithm (GA) it is able to circumvent the problem of dimensionality inherent to higher degree polynomial approximations. The GA yields the degree and values of a set of coefficients of the polynomials approximating of the image of a face. By finding a family of characteristic polynomials from several variables (pixel characteristics) for each face (say Fi ) in the data base through a resampling process the system in use, is trained. A face (say F ) is recognized by finding its characteristic polynomials and using an AdaBoost Classifier from F -s polynomials to each of the Fi -s polynomials. The winner is the polynomial family closer to F -s corresponding to target face in data base.
Abstract: The issue of scientific – technological parks has been
proposed in several countries of the world especially in western
countries since a few decades ago and its efficiency is under
examination. In our county Iran, some scientific – technological
parks have been established or are being established. This design
would evaluate the urban role and method of architecture of these
parks in order to criticize its efficiency and offer some suggestions,
as much as possible to improve its building methods in Iran. The
main problem of this design is that how much these parks in Iran do
meet the international measurements. So for this reason, one
scientific park in Iran and one from western countries would be
studied and compared with each other.
Abstract: Facility location problem involves locating a facility
to optimize some performance measures. Location of a public facility
to serve the community, such as a fire station, significantly affects its
service quality. Main objective in locating a fire station is to
minimize the response time, which is the time duration between
receiving a call and reaching the place of incident. In metropolitan
areas, fire vehicles need to cross highways and other traffic obstacles
through some obstacle-overcoming points which delay the response
time. In this paper, fire station location problem is analyzed.
Simulation models are developed for the location problems which
involve obstacles. Particular case problems are analyzed and the
results are presented.
Abstract: In this paper, we propose a novel frequency offset
estimation scheme for orthogonal frequency division multiplexing
(OFDM) systems. By correlating the OFDM signals within the coherence
phase bandwidth and employing a threshold in the frequency
offset estimation process, the proposed scheme is not only robust to
the timing offset but also has a reduced complexity compared with
that of the conventional scheme. Moreover, a timing offset estimation
scheme is also proposed as the next stage of the proposed frequency
offset estimation. Numerical results show that the proposed scheme
can estimate frequency offset with lower computational complexity
and does not require additional memory while maintaining the same
level of estimation performance.
Abstract: One of the essential requirements of a realistic
surgical simulator is to reproduce haptic sensations due to the
interactions in the virtual environment. However, the interaction need
to be performed in real-time, since a delay between the user action
and the system reaction reduces the immersion sensation. In this
paper, a prototype of a coronary stent implant simulator is present;
this system allows real-time interactions with an artery by means of a
specific haptic device. To improve the realism of the simulation, the
building of the virtual environment is based on real patients- images
and a Web Portal is used to search in the geographically remote
medical centres a virtual environment with specific features in terms
of pathology or anatomy. The functional architecture of the system
defines several Medical Centres in which virtual environments built
from the real patients- images and related metadata with specific
features in terms of pathology or anatomy are stored. The searched
data are downloaded from the Medical Centre to the Training Centre
provided with a specific haptic device and with the software
necessary both to manage the interaction in the virtual environment.
After the integration of the virtual environment in the simulation
system it is possible to perform training on the specific surgical
procedure.
Abstract: The study of effect of laser scanning speed on
material efficiency in Ti6Al4V application is very important because unspent powder is not reusable because of high temperature oxygen
pick-up and contamination. This study carried out an extensive study
on the effect of scanning speed on material efficiency by varying the
speed between 0.01 to 0.1m/sec. The samples are wire brushed and
cleaned with acetone after each deposition to remove un-melted
particles from the surface of the deposit. The substrate is weighed before and after deposition. A formula was developed to calculate the
material efficiency and the scanning speed was compared with the
powder efficiency obtained. The results are presented and discussed.
The study revealed that the optimum scanning speed exists for this study at 0.01m/sec, above and below which the powder efficiency
will drop
Abstract: This work represents the first review paper to explore the relationship between perfectionistic personality and borderline personality organization. The developmental origins, identity diffusion, interpersonal difficulties, and defense mechanisms that are common to both borderline personality and the interpersonal components of perfectionism are explored, and existing research on perfectionism and borderline personality is reviewed. The importance of the link between perfectionism and borderline features is discussed in terms of its contribution to the conceptual understanding of personality pathology as well as to applied clinical practices.
Abstract: In the last two decades radiofrequency ablation (RFA)
has been considered a promising medical procedure for the treatment
of primary and secondary malignancies. However, the needle-based
electrodes so far developed for this kind of treatment are not suitable
for the thermal ablation of tumors located in hollow organs like
esophagus, colon or bile duct. In this work a tubular electrode
solution is presented. Numerical and experimental analyses were
performed to characterize the volume of the lesion induced. Results
show that this kind of electrode is a feasible solution and numerical
simulation might provide a tool for planning RFA procedure with
some accuracy.
Abstract: Eukaryotic protein-coding genes are interrupted by spliceosomal introns, which are removed from the RNA transcripts before translation into a protein. The exon-intron structures of different eukaryotic species are quite different from each other, and the evolution of such structures raises many questions. We try to address some of these questions using statistical analysis of whole genomes. We go through all the protein-coding genes in a genome and study correlations between the net length of all the exons in a gene, the number of the exons, and the average length of an exon. We also take average values of these features for each chromosome and study correlations between those averages on the chromosomal level. Our data show universal features of exon-intron structures common to animals, plants, and protists (specifically, Arabidopsis thaliana, Caenorhabditis elegans, Drosophila melanogaster, Cryptococcus neoformans, Homo sapiens, Mus musculus, Oryza sativa, and Plasmodium falciparum). We have verified linear correlation between the number of exons in a gene and the length of a protein coded by the gene, while the protein length increases in proportion to the number of exons. On the other hand, the average length of an exon always decreases with the number of exons. Finally, chromosome clustering based on average chromosome properties and parameters of linear regression between the number of exons in a gene and the net length of those exons demonstrates that these average chromosome properties are genome-specific features.
Abstract: Webcam systems now function as the new privileged
vantage points from which to view the city. This transformation of
CCTV technology from surveillance to promotional tool is significant
because its'scopic regime' presents, back to the public, a new virtual
'site' that sits alongside its real-time counterpart. Significantly,
thisraw 'image' data can, in fact,be co-optedand processed so as to
disrupt their original purpose. This paper will demonstrate this
disruptive capacity through an architectural project. It will reveal how
the adaption the webcam image offers a technical springboard by
which to initiate alternate urban form making decisions and subvert
the disciplinary reliance on the 'flat' orthographic plan. In so doing,
the paper will show how this 'digital material' exceeds the imagistic
function of the image; shiftingit from being a vehicle of signification
to a site of affect.
Abstract: Coronary artery bypass grafts (CABG) are widely
studied with respect to hemodynamic conditions which play
important role in presence of a restenosis. However, papers which
concern with constitutive modeling of CABG are lacking in the
literature. The purpose of this study is to find a constitutive model for
CABG tissue. A sample of the CABG obtained within an autopsy
underwent an inflation–extension test. Displacements were
recoredered by CCD cameras and subsequently evaluated by digital
image correlation. Pressure – radius and axial force – elongation
data were used to fit material model. The tissue was modeled as onelayered
composite reinforced by two families of helical fibers. The
material is assumed to be locally orthotropic, nonlinear,
incompressible and hyperelastic. Material parameters are estimated
for two strain energy functions (SEF). The first is classical
exponential. The second SEF is logarithmic which allows
interpretation by means of limiting (finite) strain extensibility.
Presented material parameters are estimated by optimization based
on radial and axial equilibrium equation in a thick-walled tube. Both
material models fit experimental data successfully. The exponential
model fits significantly better relationship between axial force and
axial strain than logarithmic one.
Abstract: This work describes the aerodynamic characteristic for
aircraft wing model with and without bird feather like winglet. The
aerofoil used to construct the whole structure is NACA 653-218
Rectangular wing and this aerofoil has been used to compare the
result with previous research using winglet. The model of the
rectangular wing with bird feather like winglet has been fabricated
using polystyrene before design using CATIA P3 V5R13 software
and finally fabricated in wood. The experimental analysis for the
aerodynamic characteristic for rectangular wing without winglet,
wing with horizontal winglet and wing with 60 degree inclination
winglet for Reynolds number 1.66×105, 2.08×105 and 2.50×105 have
been carried out in open loop low speed wind tunnel at the
Aerodynamics laboratory in Universiti Putra Malaysia. The
experimental result shows 25-30 % reduction in drag coefficient and
10-20 % increase in lift coefficient by using bird feather like winglet
for angle of attack of 8 degree.