Abstract: The main objective of this paper is to estimate the cost of road traffic accidents in Egypt. The Human Capital (HC) approach, specifically the Gross-Loss-of-Output methodology, is adopted for estimation. Moreover, cost values obtained by previous national literature are updated using the inflation rates. The results indicate an estimated cost of road traffic accidents in Egypt of approximately 10 billion Egyptian Pounds (about $US 1.8 billion) for the year 2008. In addition, it is expected that this cost will rise in 2009 to 11.8 billion Egyptian Pounds (about $US 2.1 billion).
Abstract: A multiphase harmonic load flow algorithm is developed based on backward/forward sweep to examine the effects of various factors on the neutral to earth voltage (NEV), including unsymmetrical system configuration, load unbalance and harmonic injection. The proposed algorithm composes fundamental frequency and harmonic frequencies power flows. The algorithm and the associated models are tested on IEEE 13 bus system. The magnitude of NEV is investigated under various conditions of the number of grounding rods per feeder lengths, the grounding rods resistance and the grounding resistance of the in feeding source. Additionally, the harmonic injection of nonlinear loads has been considered and its influences on NEV under different conditions are shown.
Abstract: The IFRS for Small and Medium-sized Entities
(SMEs) was issued in July 2009 and currently regulators are
considering various implementation strategies of this standard.
Romania is a member of the European Union since 2007, thus
accounting regulations were issued in order to ensure compliance
with the European Accounting Directives. As the European
Commission rejected recently the mandatory use of IFRS for SMEs,
regulatory bodies from the Member States have to decide if the
standard will affect or not the accounting practices of SMEs from
their countries. Recently IASB invited stakeholders to discuss the
revision of IFRS for SMEs. Empirical studies on the differences and
similarities between national standards and IFRS for SMEs could
inform decision makers on the actual level of convergence in
different countries. The purpose of this paper is to provide empirical
evidences on the convergence of the Romanian regulations with IFRS
for SMEs analyzing the results in the context of the last revisions
proposed to the EU Accounting Directives.
Abstract: The experiment was performed to study the
relationship between excreta viscosity and Nitrogen-corrected true
metabolisable energy quantities of soybean meals using conventional
addition method (CAM) in adult cockerels for 7 d: a 3-d preexperiment
and a 4-d experiment period. Results indicated that
differences between the excreta viscosity values were (P
Abstract: As the fossil fuels kept on depleting, intense research in developing hydrogen (H2) as the alternative fuel has been done to cater our tremendous demand for fuel. The potential of H2 as the ultimate clean fuel differs with the fossil fuel that releases significant amounts of carbon dioxide (CO2) into the surrounding and leads to the global warming. The experimental work was carried out to study the production of H2 from palm kernel shell steam gasification at different variables such as heating rate, steam to biomass ratio and adsorbent to biomass ratio. Maximum H2 composition which is 61% (volume basis) was obtained at heating rate of 100oCmin-1, steam/biomass of 2:1 ratio, and adsorbent/biomass of 1:1 ratio. The commercial adsorbent had been modified by utilizing the alcoholwater mixture. Characteristics of both adsorbents were investigated and it is concluded that flowability and floodability of modified CaO is significantly improved.
Abstract: we propose a new normalized LMS (NLMS) algorithm, which gives satisfactory performance in certain applications in comaprison with con-ventional NLMS recursion. This new algorithm can be treated as a block based simplification of NLMS algorithm with significantly reduced number of multi¬ply and accumulate as well as division operations. It is also shown that such a recursion can be easily implemented in block floating point (BFP) arithmetic, treating the implementational issues much efficiently. In particular, the core challenges of a BFP realization to such adaptive filters are mainly considered in this regard. A global upper bound on the step size control parameter of the new algorithm due to BFP implementation is also proposed to prevent overflow in filtering as well as weight updating operations jointly.
Abstract: SIP (Session Initiation Protocol), using HTML based
call control messaging which is quite simple and efficient, is being
replaced for VoIP networks recently. As for authentication and
authorization purposes there are many approaches and considerations
for securing SIP to eliminate forgery on the integrity of SIP
messages. On the other hand Elliptic Curve Cryptography has
significant advantages like smaller key sizes, faster computations on
behalf of other Public Key Cryptography (PKC) systems that obtain
data transmission more secure and efficient. In this work a new
approach is proposed for secure SIP authentication by using a public
key exchange mechanism using ECC. Total execution times and
memory requirements of proposed scheme have been improved in
comparison with non-elliptic approaches by adopting elliptic-based
key exchange mechanism.
Abstract: The compressive strength development through
polymerization process of alkaline solution and fly ash blended with Microwave Incinerated Rice Husk Ash (MIRHA) is described in this
paper. Three curing conditions, which are hot gunny curing, ambient
curing, and external humidity curing are investigated to obtain the suitable curing condition for cast in situ provision. Fly ash was
blended with MIRHA at 3%, 5%, and 7% to identify the effect of blended mixes to the compressive strength and microstructure
properties of geopolymer concrete. Compressive strength results
indicated an improvement in the strength development with external humidity curing concrete samples compared to hot gunny curing and
ambient curing. Blended mixes also presented better performance
than control mixes. Improvement of interfacial transition zone (ITZ)
and micro structure in external humidity concrete samples were also
identified compared to hot gunny and ambient curing.
Abstract: The research objective was to study the toxicity of silver nanoparticles in aquatic organisms. Three forms of free silver ion nanoparticles (Ag+), silver nano particles (nano-Ag0) and silver oxide nanoparticles (nano Ag2O) were examined for toxic effects with Chlorella sp. and Moina macrocopa. The results showed that the toxicity of three silver ion forms to both organisms was examined
Abstract: Wireless Sensor Networks can be used to monitor the
physical phenomenon in such areas where human approach is nearly
impossible. Hence the limited power supply is the major constraint of
the WSNs due to the use of non-rechargeable batteries in sensor
nodes. A lot of researches are going on to reduce the energy
consumption of sensor nodes. Energy map can be used with
clustering, data dissemination and routing techniques to reduce the
power consumption of WSNs. Energy map can also be used to know
which part of the network is going to fail in near future. In this paper,
Energy map is constructed using the prediction based approach.
Adaptive alpha GM(1,1) model is used as the prediction model.
GM(1,1) is being used worldwide in many applications for predicting
future values of time series using some past values due to its high
computational efficiency and accuracy.
Abstract: Low-density parity-check (LDPC) codes have been shown to deliver capacity approaching performance; however, problematic graphical structures (e.g. trapping sets) in the Tanner graph of some LDPC codes can cause high error floors in bit-error-ratio (BER) performance under conventional sum-product algorithm (SPA). This paper presents a serial concatenation scheme to avoid the trapping sets and to lower the error floors of LDPC code. The outer code in the proposed concatenation is the LDPC, and the inner code is a high rate array code. This approach applies an interactive hybrid process between the BCJR decoding for the array code and the SPA for the LDPC code together with bit-pinning and bit-flipping techniques. Margulis code of size (2640, 1320) has been used for the simulation and it has been shown that the proposed concatenation and decoding scheme can considerably improve the error floor performance with minimal rate loss.
Abstract: In this paper, propagation of cos-Gaussian beam in strongly nonlocal nonlinear media has been stimulated by using paraxial group transformation. At first, cos-Gaussian beam, nonlocal nonlinear media, critical power, transfer matrix, and paraxial group transformation are introduced. Then, the propagation of the cos-Gaussian beam in strongly nonlocal nonlinear media is simulated. Results show that beam propagation has periodic structure during self-focusing effect in this case. However, this simple method can be used for investigation of propagation of kinds of beams in ABCD optical media.
Abstract: The seismic response of steel shear wall system considering nonlinearity effects using finite element method is investigated in this paper. The non-linear finite element analysis has potential as usable and reliable means for analyzing of civil structures with the availability of computer technology. In this research the large displacements and materially nonlinear behavior of shear wall is presented with developing of finite element code. A numerical model based on the finite element method for the seismic analysis of shear wall is presented with developing of finite element code in this research. To develop the finite element code, the standard Galerkin weighted residual formulation is used. Two-dimensional plane stress model and total Lagrangian formulation was carried out to present the shear wall response and the Newton-Raphson method is applied for the solution of nonlinear transient equations. The presented model in this paper can be developed for analysis of civil engineering structures with different material behavior and complicated geometry.
Abstract: In this paper we propose a novel approach for ascertaining human identity based on fusion of profile face and gait biometric cues The identification approach based on feature learning in PCA-LDA subspace, and classification using multivariate Bayesian classifiers allows significant improvement in recognition accuracy for low resolution surveillance video scenarios. The experimental evaluation of the proposed identification scheme on a publicly available database [2] showed that the fusion of face and gait cues in joint PCA-LDA space turns out to be a powerful method for capturing the inherent multimodality in walking gait patterns, and at the same time discriminating the person identity..
Abstract: Data Envelopment Analysis (DEA) is one of the most
widely used technique for evaluating the relative efficiency of a set
of homogeneous decision making units. Traditionally, it assumes that
input and output variables are known in advance, ignoring the critical
issue of data uncertainty. In this paper, we deal with the problem
of efficiency evaluation under uncertain conditions by adopting the
general framework of the stochastic programming. We assume that
output parameters are represented by discretely distributed random
variables and we propose two different models defined according to a
neutral and risk-averse perspective. The models have been validated
by considering a real case study concerning the evaluation of the
technical efficiency of a sample of individual firms operating in
the Italian leather manufacturing industry. Our findings show the
validity of the proposed approach as ex-ante evaluation technique
by providing the decision maker with useful insights depending on
his risk aversion degree.
Abstract: Studies have shown that the SnAgCu solder family has been widely used as a replacement for conventional Sn-Pb solders. An attractive approach is by introducing alloying additives (rare earth elements (RE), Zn, Co, Fe, Ni, Sb) into the SnAgCu solder, which helps in refining the microstructure also improving the mechanical and wetting properties of the solder. The present work focuses on the effect of additions of 0.5% Ce and Fe into Sn-3.0Ag-0.5Cu solder, in attempt to reduce the intermetallic compound (IMC) growth and reflow properties of the solder on Cu and Ni (P) surface finish, as well as effects thermal aging on the formation of intermetallic compound (IMC) on different surface finish. Excessive intermetallic compound growth may effect the interface and solder joint due to the brittle nature of the intermetallic compounds. Thus, by introducing alloying elements, IMC layer thickness can be decrease, resulting in better joint and solder reliability.
Abstract: Despite extensive study on wireless sensor network
security, defending internal attacks and finding abnormal behaviour
of the sensor are still difficult and unsolved task. The conventional
cryptographic technique does not give the robust security or detection
process to save the network from internal attacker that cause by
abnormal behavior. The insider attacker or abnormally behaved
sensor identificationand location detection framework using false
massage detection and Time difference of Arrival (TDoA) is
presented in this paper. It has been shown that the new framework
can efficiently identify and detect the insider attacker location so that
the attacker can be reprogrammed or subside from the network to
save from internal attack.
Abstract: Binder drainage test is widely used to set an upper
limit to the design binder content of porous asphalt. However, the
presence of high amount of fine particles in the drained binder may
affect the accuracy of the test result. This paper presents a study to
characterize the composition and particle size distribution of fine
particles accumulated in the drained binder. Fine aggregates and filler
in the drained binder were extracted using a suitable solvent. Then,
wet and dry sieve analysis was carried out to identify the actual
composition of the extracted fine aggregates and filler. From the
results, almost half of the drained binder consisted of fine aggregates
and this significantly affects the accuracy of the design binder content
of porous asphalt mix. This simple finding highlights the importance
of taking into account the presence of fine aggregates in the
calculation of drained binder.
Abstract: The objective of this research was to study the factors
related to the satisfaction of consumers who purchased a Toyota
SUV Fortuner. This paper was a survey data which collected 400
samples from 65 car dealerships. The survey was conducted mainly
in Bangkok, Thailand. The statistics utilized in this paper included
percentage, mean, standard deviation and Pearson Product-Moment.
The findings revealed that the majority of respondent were male with
an undergraduate degree, married and live together. The average
income of the respondents was between 20,001 - 30,000 baht. Most
of them worked for private companies. Most of them had a family
with the average of 4 members. The hypotheses testing revealed that
the factors of marketing mix in terms of product (ability, gas
mileage, and safety) were related to overall satisfaction at the
medium level. However, the findings also revealed that the factors of
marketing mix in terms of product (image), price, and promotion, and
service center were related to the overall satisfaction at the low level.
Abstract: This article first summarizes reasons why current approaches supporting Open Learning and Distance Education need to be complemented by tools permitting lecturers, researchers and students to cooperatively organize the semantic content of Learning related materials (courses, discussions, etc.) into a fine-grained shared semantic network. This first part of the article also quickly describes the approach adopted to permit such a collaborative work. Then, examples of such semantic networks are presented. Finally, an evaluation of the approach by students is provided and analyzed.