Abstract: This study aims to identify the current situation and
problems of environmental statement for major four home appliances
(refrigerators, washing machines, air conditioners and television
receivers) sold at online stores in Japan, and then to suggest how to
improve the situation, through a questionnaire survey conducted
among businesses that operate online stores and online malls with
multiple online stores. Results of the study boil down to:
(1) It is found out that environmental statement for the home
appliances at online stores have four problems; (i) less information
on “three Rs" and “chemical substances" than the one on “energy
conservation", (ii) cost for providing environmental statement, (iii)
issues associated with a label and mark placement, and (iv) issues
associated with energy conservation statement.
(2) Improvements are suggested for each of the four problems listed
above, and shown are (i) the effectiveness of, and need to promote, a
label and mark placement, (ii) cost burden on buyers, and (iii) need
of active efforts made by businesses and of dissemination of legal
regulations to businesses.
Abstract: This paper presents an algebraic approach to optimize
queries in domain-specific database management system
for protein structure data. The approach involves the introduction of
several protein structure specific algebraic operators to query the
complex data stored in an object-oriented database system. The
Protein Algebra provides an extensible set of high-level Genomic
Data Types and Protein Data Types along with a comprehensive
collection of appropriate genomic and protein functions. The paper
also presents a query translator that converts high-level query
specifications in algebra into low-level query specifications in
Protein-QL, a query language designed to query protein structure
data. The query transformation process uses a Protein Ontology that
serves the purpose of a dictionary.
Abstract: Prior to 1975, women in Laos suffered from having
reduced levels of power over decision-making in their families and in
their communities. This has had a negative impact on their ability to
develop their own identities. Their roles were identified as being
responsible for household activities and making preparations for their
marriage. Many women lost opportunities to get educated and access
the outdoor work that might have empowered them to improve their
situations. So far, no accurate figures of either emigrants or return
migrants have been compiled but it appears that most of them were
women, and it was women who most and more frequently remitted
money home. However, very few recent studies have addressed the
relationship between remittances and the roles of women in Laos.
This study, therefore, aims at redressing to some extent the
deficiencies in knowledge. Qualitative techniques were used to gather
data, including individual in-depth interviews and direct observation
in combination with the content analysis method. Forty women in
Vientiane Municipality and Savannakhet province were individually
interviewed. It was found that the monetary remittance was typically
used for family security and well-being; on fungible activities; on
economic and business activities; and on community development,
especially concerning hospitality and providing daily household
necessities. Remittances played important roles in improving many
respondents- livelihoods and positively changed their identities in
families and communities. Women became empowered as they were
able to start commercial businesses, rather than taking care of (just)
housework, children and elders. Interviews indicated that 92.5% of
the respondents their quality of lives improved, 90% felt happier in
their families and 82.5% felt conflicts in their families were reduced.
Abstract: Transmission network expansion planning (TNEP) is
a basic part of power system planning that determines where, when
and how many new transmission lines should be added to the
network. Up till now, various methods have been presented to solve
the static transmission network expansion planning (STNEP)
problem. But in all of these methods, transmission expansion
planning considering network adequacy restriction has not been
investigated. Thus, in this paper, STNEP problem is being studied
considering network adequacy restriction using discrete particle
swarm optimization (DPSO) algorithm. The goal of this paper is
obtaining a configuration for network expansion with lowest
expansion cost and a specific adequacy. The proposed idea has been
tested on the Garvers network and compared with the decimal
codification genetic algorithm (DCGA). The results show that the
network will possess maximum efficiency economically. Also, it is
shown that precision and convergence speed of the proposed DPSO
based method for the solution of the STNEP problem is more than
DCGA approach.
Abstract: LES with mixed subgrid-scale model has been used to
simulate aerodynamic performance of hypersonic configuration. The
simulation was conducted to replicate conditions and geometry of a
model which has been previously tested. LES Model has been
successful in predict pressure coefficient with the max error 1.5%
besides afterbody. But in the high Mach number condition, it is poor in
predict ability and product 12.5% error. The calculation error are
mainly conducted by the distribution swirling. The fact of poor ability
in the high Mach number and afterbody region indicated that the
mixed subgrid-scale model should be improved in large eddied
especially in hypersonic separate region. In the condition of attach and
sideslip flight, the calculation results have waves. LES are successful
in the prediction the pressure wave in hypersonic flow.
Abstract: In this paper we proposed multistage adaptive
ARQ/HARQ/HARQ scheme. This method combines pure ARQ
(Automatic Repeat reQuest) mode in low channel bit error rate and
hybrid ARQ method using two different Reed-Solomon codes in
middle and high error rate conditions. It follows, that our scheme has
three stages. The main goal is to increase number of states in adaptive
HARQ methods and be able to achieve maximum throughput for
every channel bit error rate. We will prove the proposal by
calculation and then with simulations in land mobile satellite channel
environment. Optimization of scheme system parameters is described
in order to maximize the throughput in the whole defined Signal-to-
Noise Ratio (SNR) range in selected channel environment.
Abstract: Heat pipes are used to control the thermal problem for
electronic cooling. It is especially difficult to dissipate heat to a heat
sink in an environment in space compared to earth. For solving this
problem, in this study, the Poiseuille (Po) number, which is the main
measure of the performance of a heat pipe, is studied by CFD; then, the
heat pipe performance is verified with experimental results. A heat
pipe is then fabricated for a spatial environment, and an in-house code
is developed. Further, a heat pipe subsystem, which consists of a heat
pipe, MLI (Multi Layer Insulator), SSM (Second Surface Mirror), and
radiator, is tested and correlated with the TMM (Thermal
Mathematical Model) through a commercial code. The correlation
results satisfy the 3K requirement, and the generated thermal model is
verified for application to a spatial environment.
Abstract: The main aim of this work is to establish the
capabilities of new green buildings to ascertain off-grid electricity
generation based on the integration of wind turbines in the
conceptual model of a rotating tower [2] in Dubai. An in depth
performance analysis of the WinWind 3.0MW [3] wind turbine is
performed. Data based on the Dubai Meteorological Services is
collected and analyzed in conjunction with the performance analysis
of this wind turbine. The mathematical model is compared with
Computational Fluid Dynamics (CFD) results based on a conceptual
rotating tower design model. The comparison results are further
validated and verified for accuracy by conducting experiments on a
scaled prototype of the tower design. The study concluded that
integrating wind turbines inside a rotating tower can generate enough
electricity to meet the required power consumption of the building,
which equates to a wind farm containing 9 horizontal axis wind
turbines located at an approximate area of 3,237,485 m2 [14].
Abstract: Luxury is an identity, a philosophy and a culture
which requires understanding before the adoption of e-business
practices because of its intricacies and output are essentially different
from other types of goods. Factors such as culture, personal
characteristics, website quality, and vendor characteristics influence
the online purchasing behavior of consumers thus making it a
complex area of study. This paper explores the scope of e-retail for
luxury consumption in the U.A.E. by identifying what motivates and
de-motivates online purchase behavior of U.A.E. consumers and
necessary hypotheses have been drawn to reflect behavior between
online luxury preference consumers and non-online luxury preference
consumers.
Abstract: This paper describes the design of a real-time audiorange
digital oscilloscope and its implementation in 90nm CMOS
FPGA platform. The design consists of sample and hold circuits,
A/D conversion, audio and video processing, on-chip RAM, clock
generation and control logic. The design of internal blocks and
modules in 90nm devices in an FPGA is elaborated. Also the key
features and their implementation algorithms are presented.
Finally, the timing waveforms and simulation results are put
forward.
Abstract: This paper study the segmented split capacitor
Digital-to-Analog Converter (DAC) implemented in a differentialtype
12-bit Successive Approximation Analog-to-Digital Converter
(SA-ADC). The series capacitance split array method employed as it
reduced the total area of the capacitors required for high resolution
DACs. A 12-bit regular binary array structure requires 2049 unit
capacitors (Cs) while the split array needs 127 unit Cs. These results
in the reduction of the total capacitance and power consumption of
the series split array architectures as to regular binary-weighted
structures. The paper will show the 12-bit DAC series split capacitor
with 4-bit thermometer coded DAC architectures as well as the
simulation and measured results.
Abstract: This paper presents a novel iris recognition system
using 1D log polar Gabor wavelet and Euler numbers. 1D log polar
Gabor wavelet is used to extract the textural features, and Euler
numbers are used to extract topological features of the iris. The
proposed decision strategy uses these features to authenticate an
individual-s identity while maintaining a low false rejection rate. The
algorithm was tested on CASIA iris image database and found to
perform better than existing approaches with an overall accuracy of
99.93%.
Abstract: The Combination of path planning and path following is the main purpose of this paper. This paper describes the developed practical approach to motion control of the MRL small size robots. An intelligent controller is applied to control omni-directional robots motion in simulation and real environment respectively. The Brain Emotional Learning Based Intelligent Controller (BELBIC), based on LQR control is adopted for the omni-directional robots. The contribution of BELBIC in improving the control system performance is shown as application of the emotional learning in a real world problem. Optimizing of the control effort can be achieved in this method too. Next the implicit communication method is used to determine the high level strategies and coordination of the robots. Some simple rules besides using the environment as a memory to improve the coordination between agents make the robots' decision making system. With this simple algorithm our team manifests a desirable cooperation.
Abstract: The aim of this study was to investigate the
effectiveness of anaerobic digestion for the treatment of wool
scouring wastes. The experiments design comprised three ratios of
waste (W) to seed(S) (W:S) of 25:75, 50:50 and 75:25, corresponding
to 1.9. 1.7 and 1.5g tCOD/g TS, respectively, with or without
chemicals addition. NH4Cl was added to the reactors as a source for
nitrogen to achieve C:N:P of 420:14:3. A cationic flocculent was
added at 0.5 and 0.75% to enhance flocculation of sludge. The results
showed that the reactors that received W:S at a ratio of 25:75
produced the largest volume of biogas. The final soluble COD
(sCOD) was below the limits for discharge to the sewer system.
Abstract: A fusion classifier composed of two modules, one made by a hidden Markov model (HMM) and the other by a support vector machine (SVM), is proposed to recognize faces with pose variations in open-set recognition settings. The HMM module captures the evolution of facial features across a subject-s face using the subject-s facial images only, without referencing to the faces of others. Because of the captured evolutionary process of facial features, the HMM module retains certain robustness against pose variations, yielding low false rejection rates (FRR) for recognizing faces across poses. This is, however, on the price of poor false acceptance rates (FAR) when recognizing other faces because it is built upon withinclass samples only. The SVM module in the proposed model is developed following a special design able to substantially diminish the FAR and further lower down the FRR. The proposed fusion classifier has been evaluated in performance using the CMU PIE database, and proven effective for open-set face recognition with pose variations. Experiments have also shown that it outperforms the face classifier made by HMM or SVM alone.
Abstract: A combination of image fusion and quad tree decomposition method is used for detecting the sunspot trajectories in each month and computation of the latitudes of these trajectories in each solar hemisphere. Daily solar images taken with SOHO satellite are fused for each month and the result of fused image is decomposed with Quad Tree decomposition method in order to classifying the sunspot trajectories and then to achieve the precise information about latitudes of sunspot trajectories. Also with fusion we deduce some physical remarkable conclusions about sun magnetic fields behavior. Using quad tree decomposition we give information about the region on sun surface and the space angle that tremendous flares and hot plasma gases permeate interplanetary space and attack to satellites and human technical systems. Here sunspot images in June, July and August 2001 are used for studying and give a method to compute the latitude of sunspot trajectories in each month with sunspot images.
Abstract: Bendability is constrained by maximum top roller
load imparting capacity of the machine. Maximum load is
encountered during the edge pre-bending stage of roller bending.
Capacity of 3-roller plate bending machine is specified by
maximum thickness and minimum shell diameter combinations that
can be pre-bend for given plate material of maximum width.
Commercially available plate width or width of the plate that can be
accommodated on machine decides the maximum rolling width.
Original equipment manufacturers (OEM) provide the machine
capacity chart based on reference material considering perfectly
plastic material model. Reported work shows the bendability analysis
of heavy duty 3-roller plate bending machine. The input variables for
the industry are plate thickness, shell diameter and material property
parameters, as it is fixed by the design. Analytical models of
equivalent thickness, equivalent width and maximum width based on
power law material model were derived to study the bendability.
Equation of maximum width provides bendability for designed
configuration i.e. material property, shell diameter and thickness
combinations within the machine limitations. Equivalent thicknesses
based on perfectly plastic and power law material model were
compared for four different materials grades of C-Mn steel in order
to predict the bend-ability. Effect of top roller offset on the
bendability at maximum top roller load imparting capacity is
reported.
Abstract: There are some existing Java benchmarks, application benchmarks as well as micro benchmarks or mixture both of them,such as: Java Grande, Spec98, CaffeMark, HBech, etc. But none of them deal with behaviors of multi tasks operating systems. As a result, the achieved outputs are not satisfied for performance evaluation engineers. Behaviors of multi tasks operating systems are based on a schedule management which is employed in these systems. Different processes can have different priority to share the same resources. The time is measured by estimating from applications started to it is finished does not reflect the real time value which the system need for running those programs. New approach to this problem should be done. Having said that, in this paper we present a new Java benchmark, named FHOJ benchmark, which directly deals with multi tasks behaviors of a system. Our study shows that in some cases, results from FHOJ benchmark are far more reliable in comparison with some existing Java benchmarks.
Abstract: More and more governments around the world are
introducing e-government as a means of reducing costs, improving
services, saving time and increasing effectiveness and efficiency in
the public sector Therefore e-government has been identified as one
of the top priorities for Saudi government and all its agencies.
However, the adoption of e-government is facing many challenges
and barriers such as technological, cultural, organizational, and social
issues which must be considered and treated carefully by any
government contemplating its adoption. This paper reports on a pilot
study amongst online (e-ready) citizens to identify the challenges and
barriers that affect the adoption of e-government services especially
from their perspective in Saudi society. Based on the analysis of data
collected from an online survey the researcher was able to identify
some of the important barriers and challenges from the e-ready
citizen perspective. As a result, this study has generated a list of
possible strategies to move towards successful adoption of egovernment
services in Saudi Arabia.
Abstract: Cs-type nanocomposite zeolite membrane was successfully synthesized on an alumina ceramic hollow fibre with a mean outer diameter of 1.7 mm; cesium cationic exchange test was carried out inside test module with mean wall thickness of 230 μm and an average crossing pore size smaller than 0.2 μm. Separation factor of n-butane/H2 obtained indicate that a relatively high quality closed to 20. Maxwell-Stefan modeling provides an equivalent thickness lower than 1 µm. To compare the difference an application to CO2/N2 separation has been achieved, reaching separation factors close to (4,18) before and after cation exchange on H-zeolite membrane formed within the pores of a ceramic alumina substrate.