Abstract: The term hybrid composite refers to the composite
containing more than one type of fiber material as reinforcing fillers.
It has become attractive structural material due to the ability of
providing better combination of properties with respect to single fiber
containing composite. The eco-friendly nature as well as processing
advantage, light weight and low cost have enhanced the attraction
and interest of natural fiber reinforced composite. The objective of
present research is to study the mechanical properties of jute-coir
fiber reinforced hybrid polypropylene (PP) composite according to
filler loading variation. In the present work composites were
manufactured by using hot press machine at four levels of fiber
loading (5, 10, 15 and 20 wt %). Jute and coir fibers were utilized at a
ratio of (1:1) during composite manufacturing. Tensile, flexural,
impact and hardness tests were conducted for mechanical
characterization. Tensile test of composite showed a decreasing trend
of tensile strength and increasing trend of the Young-s modulus with
increasing fiber content. During flexural, impact and hardness tests,
the flexural strength, flexural modulus, impact strength and hardness
were found to be increased with increasing fiber loading. Based on
the fiber loading used in this study, 20% fiber reinforced composite
resulted the best set of mechanical properties.
Abstract: e-Government structures permits the government to operate in a more transparent and accountable manner of which it increases the power of the individual in relation to that of the government. This paper identifies the factors that determine customer-s attitude towards e-Government services using a theoretical model based on the Technology Acceptance Model. Data relating to the constructs were collected from 200 respondents. The research model was tested using Structural Equation Modeling (SEM) techniques via the Analysis of Moment Structure (AMOS 16) computer software. SEM is a comprehensive approach to testing hypotheses about relations among observed and latent variables. The proposed model fits the data well. The results demonstrated that e- Government services acceptance can be explained in terms of compatibility and attitude towards e-Government services. The setup of the e-Government services will be compatible with the way users work and are more likely to adopt e-Government services owing to their familiarity with the Internet for various official, personal, and recreational uses. In addition, managerial implications for government policy makers, government agencies, and system developers are also discussed.
Abstract: In this paper, Tobephobia (TBP) alludes to the fear of
failure experienced by teachers to manage curriculum change. TBP is
an emerging concept and it extends the boundaries of research in
terms of how we view achievement and failure in education.
Outcomes-based education (OBE) was introduced fifteen years ago
in South African schools without simultaneously upgrading teachers-
professional competencies. This exploratory research, therefore
examines a simple question: What is the impact of TBP and OBE on
teachers? Teacher ineptitude to cope with the OBE curriculum in the
classroom is a serious problem affecting large numbers of South
African teachers. This exploratory study sought to determine the
perceived negative impact of OBE and TBP on teachers. A survey
was conducted amongst 311 teachers in Port Elizabeth and Durban,
South Africa. The results confirm the very negative impact of TBP
and OBE on teachers. This exploratory study authenticates the
existence of TBP.
Abstract: Current research has explored the impact of
instructional immediacy, defined as those behaviors that help build
close relationships or feelings of closeness, both on cognition and
motivation in the traditional classroom and online classroom;
however, online courses continue to suffer from higher dropout rates.
Based on Albert Bandura-s Social Cognitive Theory, four primary
relationships or interactions in an online course will be explored in
light of how they can provide immediacy thereby reducing student
attrition and improving cognitive learning. The four relationships are
teacher-student, student-student, and student-content, and studentcomputer.
Results of a study conducted with inservice teachers
completing a 14-week online professional development technology
course will be examined to demonstrate immediacy strategies that
improve cognitive learning and reduce student attrition. Results of
the study reveal that students can be motivated through various
interactions and instructional immediacy behaviors which lead to
higher completion rates, improved self-efficacy, and cognitive
learning.
Abstract: The paper presents the optimization problem for the
multi-element synthetic transmit aperture method (MSTA) in
ultrasound imaging applications. The optimal choice of the transmit
aperture size is performed as a trade-off between the lateral
resolution, penetration depth and the frame rate. Results of the
analysis obtained by a developed optimization algorithm are
presented. Maximum penetration depth and the best lateral resolution
at given depths are chosen as the optimization criteria. The
optimization algorithm was tested using synthetic aperture data of
point reflectors simulated by Filed II program for Matlab® for the
case of 5MHz 128-element linear transducer array with 0.48 mm
pitch are presented. The visualization of experimentally obtained
synthetic aperture data of a tissue mimicking phantom and in vitro
measurements of the beef liver are also shown. The data were
obtained using the SonixTOUCH Research systemequipped with a
linear 4MHz 128 element transducerwith 0.3 mm element pitch, 0.28
mm element width and 70% fractional bandwidth was excited by one
sine cycle pulse burst of transducer's center frequency.
Abstract: The topic of surface flattening plays a vital role in the field of computer aided design and manufacture. Surface flattening enables the production of 2D patterns and it can be used in design and manufacturing for developing a 3D surface to a 2D platform, especially in fashion design. This study describes surface flattening based on minimum energy methods according to the property of different fabrics. Firstly, through the geometric feature of a 3D surface, the less transformed area can be flattened on a 2D platform by geodesic. Then, strain energy that has accumulated in mesh can be stably released by an approximate implicit method and revised error function. In some cases, cutting mesh to further release the energy is a common way to fix the situation and enhance the accuracy of the surface flattening, and this makes the obtained 2D pattern naturally generate significant cracks. When this methodology is applied to a 3D mannequin constructed with feature lines, it enhances the level of computer-aided fashion design. Besides, when different fabrics are applied to fashion design, it is necessary to revise the shape of a 2D pattern according to the properties of the fabric. With this model, the outline of 2D patterns can be revised by distributing the strain energy with different results according to different fabric properties. Finally, this research uses some common design cases to illustrate and verify the feasibility of this methodology.
Abstract: It-s known that incorporating prior knowledge into support
vector regression (SVR) can help to improve the approximation
performance. Most of researches are concerned with the incorporation
of knowledge in the form of numerical relationships. Little work,
however, has been done to incorporate the prior knowledge on the
structural relationships among the variables (referred as to Structural
Prior Knowledge, SPK). This paper explores the incorporation of SPK
in SVR by constructing appropriate admissible support vector kernel
(SV kernel) based on the properties of reproducing kernel (R.K).
Three-levels specifications of SPK are studied with the corresponding
sub-levels of prior knowledge that can be considered for the method.
These include Hierarchical SPK (HSPK), Interactional SPK (ISPK)
consisting of independence, global and local interaction, Functional
SPK (FSPK) composed of exterior-FSPK and interior-FSPK. A
convenient tool for describing the SPK, namely Description Matrix
of SPK is introduced. Subsequently, a new SVR, namely Motivated
Support Vector Regression (MSVR) whose structure is motivated
in part by SPK, is proposed. Synthetic examples show that it is
possible to incorporate a wide variety of SPK and helpful to improve
the approximation performance in complex cases. The benefits of
MSVR are finally shown on a real-life military application, Air-toground
battle simulation, which shows great potential for MSVR to
the complex military applications.
Abstract: Deep and radical social reforms of the last century-s
nineties in many Eastern European countries caused changes in
Information Technology-s (IT) field. Inefficient information
technologies were rapidly replaced with forefront IT solutions, e.g.,
in Eastern European countries there is a high level penetration of
qualitative high-speed Internet. The authors have taken part in the
introduction of those changes in Latvia-s leading IT research
institute. Grounding on their experience authors in this paper offer an
IT services based model for analysis the mentioned changes- and
development processes in the higher education and research fields,
i.e., for research e-infrastructure-s development. Compare to the
international practice such services were developed in Eastern Europe
in an untraditional way, which provided swift and positive
technological changes.
Abstract: This paper deals with the conceptual design of the
new aeroelastic demonstrator for the whirl flutter simulation. The
paper gives a theoretical background of the whirl flutter phenomenon
and describes the events of the whirl flutter occurrence in the
aerospace practice. The second part is focused on the experimental
research of the whirl flutter on aeroelastic similar models. Finally the
concept of the new aeroelastic demonstrator is described. The
demonstrator represents the wing and engine of the twin turboprop
commuter aircraft including a driven propeller. It allows the changes
of the main structural parameters influencing the whirl flutter
stability characteristics. It is intended for the experimental
investigation of the whirl flutter in the wind tunnel. The results will
be utilized for validation of analytical methods and software tools.
Abstract: This paper begins with formal defining of human rights and freedoms, and the basic document regarding the said subject is undoubtedly French Declaration of the Rights of Man and of the Citizen from 789. This paper furthermore parses legal sources relevant for the workers' rights in legal system of the Republic of Croatia, international contracts and the Labour Act, which is also a master bill regarding workers' rights The authors are also dealing with issues of Constitutional Court of the Republic of Croatia and its' position in judicial system of the Republic of Croatia, as well as with the specifics of Constitutional Complaint, and the crucial part of the paper is based on the research conducted with an aim to determine implementation of rights and liberties guaranteed by the articles 54. and 55. of the Constitution of the Republic of Croatia by means of Constitutional Complaint.
Abstract: This research sought to discover the forms of
promotion and dissemination of traditional local wisdom that are
used to create occupations among the elderly at Noanmueng
Community, Muang Sub-District, Baan Doong District, Udornthani
Province. The criteria used to select the research sample group were:
having a role involved in the promotion and dissemination of
traditional local wisdom to create occupations among the elderly;
being an experienced person who the residents of Noanmueng
Community find trustworthy; and having lived in Noanmueng
Community for a long time so as to be able to see the development
and change that occurs. A total of 16 persons were thus selected. Data
was gathered through a qualitative study, using semi-structured indepth
interviews. The collected data was then summarized and
discussed according to the research objectives. Finally, the data was
presented in narrative format. Results found that the identifying
traditional local wisdom of the community (which grew from the
residents’ experience and beneficial usage in daily life, passed down
from generation to generation) was the weaving of cloth and
basketry. As for the manner of promotion and dissemination of
traditional local wisdom, these skills were passed down through
teaching by example to family members, relatives and others in the
community. This was largely the initiative of the elders or elderly
members of the community. In order for the promotion and
dissemination of traditional local wisdom to create occupations
among the elderly, the traditional local wisdom should be supported
in every way through participation of the community members. For
example, establish a museum of traditional local wisdom for the
collection of traditional local wisdom in various fields, both from the
past and present innovations. This would be a source of pride for the
community, simultaneously helping traditional local wisdom to
become widely known and to create income for the community’s
elderly. Additional ways include organizing exhibitions of products
made by traditional local wisdom, finding both domestic and
international markets, as well as building both domestic and
international networks aiming to find opportunities to market
products made by traditional local wisdom.
Abstract: Studies in neuroscience suggest that both global and
local feature information are crucial for perception and recognition of
faces. It is widely believed that local feature is less sensitive to
variations caused by illumination, expression and illumination. In
this paper, we target at designing and learning local features for face
recognition. We designed three types of local features. They are
semi-global feature, local patch feature and tangent shape feature.
The designing of semi-global feature aims at taking advantage of
global-like feature and meanwhile avoiding suppressing AdaBoost
algorithm in boosting weak classifies established from small local
patches. The designing of local patch feature targets at automatically
selecting discriminative features, and is thus different with traditional
ways, in which local patches are usually selected manually to cover
the salient facial components. Also, shape feature is considered in
this paper for frontal view face recognition. These features are
selected and combined under the framework of boosting algorithm
and cascade structure. The experimental results demonstrate that the
proposed approach outperforms the standard eigenface method and
Bayesian method. Moreover, the selected local features and
observations in the experiments are enlightening to researches in
local feature design in face recognition.
Abstract: This paper evaluates performances of an adaptive noise
cancelling (ANC) based target detection algorithm on a set of real test
data supported by the Defense Evaluation Research Agency (DERA
UK) for multi-target wideband active sonar echolocation system. The
hybrid algorithm proposed is a combination of an adaptive ANC
neuro-fuzzy scheme in the first instance and followed by an iterative
optimum target motion estimation (TME) scheme. The neuro-fuzzy
scheme is based on the adaptive noise cancelling concept with the
core processor of ANFIS (adaptive neuro-fuzzy inference system) to
provide an effective fine tuned signal. The resultant output is then
sent as an input to the optimum TME scheme composed of twogauge
trimmed-mean (TM) levelization, discrete wavelet denoising
(WDeN), and optimal continuous wavelet transform (CWT) for
further denosing and targets identification. Its aim is to recover the
contact signals in an effective and efficient manner and then determine
the Doppler motion (radial range, velocity and acceleration) at very
low signal-to-noise ratio (SNR). Quantitative results have shown that
the hybrid algorithm have excellent performance in predicting targets-
Doppler motion within various target strength with the maximum
false detection of 1.5%.
Abstract: In this research, an aerobic composting method is
studied to reuse organic waste from rubber factory waste as soil fertilizer and to study the effect of cellulolytic microbial activator
(CMA) as the activator in the rubber factory waste composting. The
performance of the composting process was monitored as a function
of carbon and organic matter decomposition rate, temperature and
moisture content. The results indicate that the rubber factory waste is best composted with water hyacinth and sludge than composted
alone. In addition, the CMA is more affective when mixed with the rubber factory waste, water hyacinth and sludge since a good fertilizer is achieved. When adding CMA into the rubber factory
waste composted alone, the finished product does not achieve a
standard of fertilizer, especially the C/N ratio.
Finally, the finished products of composting rubber factory waste and water hyacinth and sludge (both CMA and without CMA), can be an environmental friendly alternative to solve the disposal problems of rubber factory waste. Since the C/N ratio, pH, moisture
content, temperature, and nutrients of the finished products are acceptable for agriculture use.
Abstract: The coalescer process is one of the methods for oily water treatment by increasing the oil droplet size in order to enhance the separating velocity and thus effective separation. However, the presence of surfactants in an oily emulsion can limit the obtained mechanisms due to the small oil size related with stabilized emulsion. In this regard, the purpose of this research is to improve the efficiency of the coalescer process for treating the stabilized emulsion. The effects of bed types, bed height, liquid flow rate and stage coalescer (step-bed) on the treatment efficiencies in term of COD values were studied. Note that the treatment efficiency obtained experimentally was estimated by using the COD values and oil droplet size distribution. The study has shown that the plastic media has more effective to attach with oil particles than the stainless one due to their hydrophobic properties. Furthermore, the suitable bed height (3.5 cm) and step bed (3.5 cm with 2 steps) were necessary in order to well obtain the coalescer performance. The application of step bed coalescer process in reactor has provided the higher treatment efficiencies in term of COD removal than those obtained with classical process. The proposed model for predicting the area under curve and thus treatment efficiency, based on the single collector efficiency (ηT) and the attachment efficiency (α), provides relatively a good coincidence between the experimental and predicted values of treatment efficiencies in this study.
Abstract: The objectives of this research were 1) to study the
opinions of newspaper journalists about their trustworthiness in the
National Press Council of Thailand (NPCT) and the NPCT-s success
in regulating the professional ethics; and 2) to study the differences
among mean vectors of the variables of trustworthiness in the NPCT
and opinions on the NPCT-s success in regulating professional ethics
among samples working at different work positions and from
different affiliation of newspaper organizations. The results showed
that 1) Interaction effects between the variables of work positions and
affiliation were not statistically significant at the confidence level of
0.05. 2) There was a statistically significant difference (p
Abstract: In this research, the diabetes conditions of people (healthy, prediabete and diabete) were tried to be identified with noninvasive palm perspiration measurements. Data clusters gathered from 200 subjects were used (1.Individual Attributes Cluster and 2. Palm Perspiration Attributes Cluster). To decrase the dimensions of these data clusters, Principal Component Analysis Method was used. Data clusters, prepared in that way, were classified with Support Vector Machines. Classifications with highest success were 82% for Glucose parameters and 84% for HbA1c parametres.
Abstract: Web usage mining has become a popular research
area, as a huge amount of data is available online. These data can be
used for several purposes, such as web personalization, web structure
enhancement, web navigation prediction etc. However, the raw log
files are not directly usable; they have to be preprocessed in order to
transform them into a suitable format for different data mining tasks.
One of the key issues in the preprocessing phase is to identify web
users. Identifying users based on web log files is not a
straightforward problem, thus various methods have been developed.
There are several difficulties that have to be overcome, such as client
side caching, changing and shared IP addresses and so on. This paper
presents three different methods for identifying web users. Two of
them are the most commonly used methods in web log mining
systems, whereas the third on is our novel approach that uses a
complex cookie-based method to identify web users. Furthermore we
also take steps towards identifying the individuals behind the
impersonal web users. To demonstrate the efficiency of the new
method we developed an implementation called Web Activity
Tracking (WAT) system that aims at a more precise distinction of
web users based on log data. We present some statistical analysis
created by the WAT on real data about the behavior of the Hungarian
web users and a comprehensive analysis and comparison of the three
methods
Abstract: Innovation, technology and knowledge are the trilogy
of impact to support the challenges arising from uncertainty.
Evidence showed an opportunity to ask how to manage in this
environment under constant innovation. In an attempt to get a
response from the field of Management Sciences, based in the
Contingency Theory, a research was conducted, with
phenomenological and descriptive approaches, using the Case Study
Method and the usual procedures for this task involving a focus
group composed of managers and employees working in the
pharmaceutical field. The problem situation was raised; the state of
the art was interpreted and dissected the facts. In this tasks were
involved four establishments. The result indicates that these focused
ventures have been managed by its founder empirically and is
experimenting agility described in this work. The expectation of this
study is to improve concepts for stakeholders on creativity in
business.
Abstract: Energy efficient protocol design is the aim of current
researches in the area of sensor networks where limited power
resources impose energy conservation considerations. In this paper
we care for Medium Access Control (MAC) protocols and after an
extensive literature review, two adaptive schemes are discussed. Of
them, adaptive-rate MACs which were introduced for throughput
enhancement show the potency to save energy, even more than
adaptive-power schemes. Then we propose an allocation algorithm
for getting accurate and reliable results. Through a simulation study
we validated our claim and showed the power saving of adaptive-rate
protocols.