Abstract: ''Cocktail party problem'' is well known as one of the human auditory abilities. We can recognize the specific sound that we want to listen by this ability even if a lot of undesirable sounds or noises are mixed. Blind source separation (BSS) based on independent component analysis (ICA) is one of the methods by which we can separate only a special signal from their mixed signals with simple hypothesis. In this paper, we propose an online approach for blind source separation using the sliding DFT and the time domain independent component analysis. The proposed method can reduce calculation complexity in comparison with conventional methods, and can be applied to parallel processing by using digital signal processors (DSPs) and so on. We evaluate this method and show its availability.
Abstract: This research work proposed a study of fruit bruise detection by means of a biospeckle method, selecting the papaya fruit (Carica papaya) as testing body. Papaya is recognized as a fruit of outstanding nutritional qualities, showing high vitamin A content, calcium, carbohydrates, exhibiting high popularity all over the world, considering consumption and acceptability. The commercialization of papaya faces special problems which are associated to bruise generation during harvesting, packing and transportation. Papaya is classified as climacteric fruit, permitting to be harvested before the maturation is completed. However, by one side bruise generation is partially controlled once the fruit flesh exhibits high mechanical firmness. By the other side, mechanical loads can set a future bruise at that maturation stage, when it can not be detected yet by conventional methods. Mechanical damages of fruit skin leave an entrance door to microorganisms and pathogens, which will cause severe losses of quality attributes. Traditional techniques of fruit quality inspection include total soluble solids determination, mechanical firmness tests, visual inspections, which would hardly meet required conditions for a fully automated process. However, the pertinent literature reveals a new method named biospeckle which is based on the laser reflectance and interference phenomenon. The laser biospeckle or dynamic speckle is quantified by means of the Moment of Inertia, named after its mechanical counterpart due to similarity between the defining formulae. Biospeckle techniques are able to quantify biological activities of living tissues, which has been applied to seed viability analysis, vegetable senescence and similar topics. Since the biospeckle techniques can monitor tissue physiology, it could also detect changes in the fruit caused by mechanical damages. The proposed technique holds non invasive character, being able to generate numerical results consistent with an adequate automation. The experimental tests associated to this research work included the selection of papaya fruit at different maturation stages which were submitted to artificial mechanical bruising tests. Damages were visually compared with the frequency maps yielded by the biospeckle technique. Results were considered in close agreement.
Abstract: Neem is a highly heterozygous and commercially
important perennial plant. Conventionally, it is propagated by seeds
which loose viability within two weeks. Strictly cross pollinating
nature of the plant causes serious barrier to the genetic improvement
by conventional methods. Alternative methods of tree improvement
such as somatic hybridization, mutagenesis and genetic
transformation require an efficient in vitro plant regeneration system.
In this regard, somatic embryogenesis particularly secondary somatic
embryogenesis may offer an effective system for large scale plant
propagation without affecting the clonal fidelity of the regenerants. It
can be used for synthetic seed production, which further bolsters
conservation of this tree species which is otherwise very difficult
The present report describes the culture conditions necessary to
induce and maintain repetitive somatic embryogenesis, for the first
time, in neem. Out of various treatments tested, the somatic embryos
were induced directly from immature zygotic embryos of neem on
MS + TDZ (0.1 μM) + ABA (4 μM), in more than 76 % cultures.
Direct secondary somatic embryogenesis occurred from primary
somatic embryos on MS + IAA (5 μM) + GA3 (5 μM) in 12.5 %
cultures. Embryogenic competence of the explant as well as of the
primary embryos was maintained for a long period by repeated
subcultures at frequent intervals. A maximum of 10 % of these
somatic embryos were converted into plantlets.
Abstract: Worldwide conventional resources of fossil fuel are depleting very fast due to large scale increase in use of transport vehicles every year, therefore consumption rate of oil in transport sector alone has gone very high. In view of this, the major thrust has now been laid upon the search of alternative energy source and also for cost effective energy conversion system. The air converted into compressed form by non conventional or conventional methods can be utilized as potential working fluid for producing shaft work in the air turbine and thus offering the capability of being a zero pollution energy source. This paper deals with the mathematical modeling and performance evaluation of a small capacity compressed air driven vaned type novel air turbine. Effect of expansion action and steady flow work in the air turbine at high admission air pressure of 6 bar, for varying injection to vane angles ratios 0.2-1.6, at the interval of 0.2 and at different vane angles such as 30o, 45o, 51.4o, 60o, 72o, 90o, and 120o for 12, 8, 7, 6, 5, 4 and 3 vanes respectively at speed of rotation 2500 rpm, has been quantified and analyzed here. Study shows that the expansion power has major contribution to total power, whereas the contribution of flow work output has been found varying only up to 19.4%. It is also concluded that for variation of injection to vane angle ratios from 0.2 to 1.2, the optimal power output is seen at vane angle 90o (4 vanes) and for 1.4 to 1.6 ratios, the optimal total power is observed at vane angle 72o (5 vanes). Thus in the vaned type novel air turbine the optimum shaft power output is developed when rotor contains 4-5 vanes for almost all situations of injection to vane angle ratios from 0.2 to 1.6.
Abstract: The most common type of controller being used in
the industry is PI(D) controller which has been used since 1945 and
is still being widely used due to its efficiency and simplicity. In
most cases, the PI(D) controller was tuned without taking into
consideration of the effect of actuator saturation. In real processes,
the most common actuator which is valve will act as constraint and
restrict the controller output. Since the controller is not designed to
encounter saturation, the process may windup and consequently
resulted in large oscillation or may become unstable. Usually, an
antiwindup compensator is added to the feedback control loop to
reduce the deterioration effect of integral windup. This research
aims to specifically control processes with constraints. The
proposed method was applied to two different types of food
processes, which are blending and spray drying. Simulations were
done using MATLAB and the performances of the proposed
method were compared with other conventional methods. The
proposed technique was able to control the processes and avoid
saturation such that no anti windup compensator is needed.
Abstract: In the time of globalisation, growing uncertainty, ambiguity and change, traditional way of doing business are no longer sufficient and it is important to consider non-conventional methods and approaches to release creativity and facilitate innovation and growth. Thus, creative industries, as a natural source of creativity and innovation, draw particular attention. This paper explores feasibility of building creative partnerships between creative industries and business and brings attention to mutual benefits derived from such partnerships. Design/approach - This paper is a theoretical exploration of projects, practices and research findings addressing collaboration between creative industries and business. Thus, it concerns creative industries, arts, business and its representatives in order to define requirements for creative partnerships to work and succeed. Findings – Current practices in engaging into arts-business partnerships are still very few, although most of creative partnerships proved to be highly valuable and mutually beneficial. Certain conditions shall be provided in order to benefit from arts-business creative synergy. Originality/value- By integrating different sources of literature, this article provides a base for conducting empirical research in several dimensions within arts-business partnerships.
Abstract: The anti-lock braking systems installed on vehicles
for safe and effective braking, are high-order nonlinear and timevariant.
Using fuzzy logic controllers increase efficiency of such
systems, but impose a high computational complexity as well. The
main concept introduced by this paper is reducing computational
complexity of fuzzy controllers by deploying problem-solution data
structure. Unlike conventional methods that are based on
calculations, this approach is based on data oriented modeling.
Abstract: Knowledge of an organization does not merely reside
in structured form of information and data; it is also embedded in
unstructured form. The discovery of such knowledge is particularly
difficult as the characteristic is dynamic, scattered, massive and
multiplying at high speed. Conventional methods of managing
unstructured information are considered too resource demanding and
time consuming to cope with the rapid information growth.
In this paper, a Multi-faceted and Automatic Knowledge
Elicitation System (MAKES) is introduced for the purpose of
discovery and capture of organizational knowledge. A trial
implementation has been conducted in a public organization to
achieve the objective of decision capture and navigation from a
number of meeting minutes which are autonomously organized,
classified and presented in a multi-faceted taxonomy map in both
document and content level. Key concepts such as critical decision
made, key knowledge workers, knowledge flow and the relationship
among them are elicited and displayed in predefined knowledge
model and maps. Hence, the structured knowledge can be retained,
shared and reused.
Conducting Knowledge Management with MAKES reduces work
in searching and retrieving the target decision, saves a great deal of
time and manpower, and also enables an organization to keep pace
with the knowledge life cycle. This is particularly important when
the amount of unstructured information and data grows extremely
quickly. This system approach of knowledge management can
accelerate value extraction and creation cycles of organizations.
Abstract: Considering complexity of products, new geometrical
design and investment tolerances that are necessary, measuring and
dimensional controlling involve modern and more precise methods.
Photo digitizing method using two cameras to record pictures and
utilization of conventional method named “cloud points" and data
analysis by the use of ATOUS software, is known as modern and
efficient in mentioned context. In this paper, benefits of photo
digitizing method in evaluating sampling of machining processes
have been put forward. For example, assessment of geometrical
integrity surface in 5-axis milling process and measurement of
carbide tool wear in turning process, can be can be brought forward.
Advantages of this method comparing to conventional methods have
been expressed.
Abstract: The information revealed by derivatives can help to
better characterize digital near-end crosstalk signatures with the
ultimate goal of identifying the specific aggressor signal.
Unfortunately, derivatives tend to be very sensitive to even low
levels of noise. In this work we approximated the derivatives of both
quiet and noisy digital signals using a wavelet-based technique. The
results are presented for Gaussian digital edges, IBIS Model digital
edges, and digital edges in oscilloscope data captured from an actual
printed circuit board. Tradeoffs between accuracy and noise
immunity are presented. The results show that the wavelet technique
can produce first derivative approximations that are accurate to
within 5% or better, even under noisy conditions. The wavelet
technique can be used to calculate the derivative of a digital signal
edge when conventional methods fail.
Abstract: This paper proposes the use of Bayesian belief
networks (BBN) as a higher level of health risk assessment for a
dumping site of lead battery smelter factory. On the basis of the
epidemiological studies, the actual hospital attendance records and
expert experiences, the BBN is capable of capturing the probabilistic
relationships between the hazardous substances and their adverse
health effects, and accordingly inferring the morbidity of the adverse
health effects. The provision of the morbidity rates of the related
diseases is more informative and can alleviate the drawbacks of
conventional methods.
Abstract: A hardware efficient, multi mode, re-configurable
architecture of interleaver/de-interleaver for multiple standards,
like DVB, WiMAX and WLAN is presented. The interleavers
consume a large part of silicon area when implemented by using
conventional methods as they use memories to store permutation
patterns. In addition, different types of interleavers in different
standards cannot share the hardware due to different construction
methodologies. The novelty of the work presented in this paper is
threefold: 1) Mapping of vital types of interleavers including
convolutional interleaver onto a single architecture with flexibility
to change interleaver size; 2) Hardware complexity for channel
interleaving in WiMAX is reduced by using 2-D realization of the
interleaver functions; and 3) Silicon cost overheads reduced by
avoiding the use of small memories. The proposed architecture
consumes 0.18mm2 silicon area for 0.12μm process and can
operate at a frequency of 140 MHz. The reduced complexity helps
in minimizing the memory utilization, and at the same time
provides strong support to on-the-fly computation of permutation
patterns.
Abstract: In this paper, the implementation of a rule-based
intuitive reasoner is presented. The implementation included two
parts: the rule induction module and the intuitive reasoner. A large
weather database was acquired as the data source. Twelve weather
variables from those data were chosen as the “target variables"
whose values were predicted by the intuitive reasoner. A “complex"
situation was simulated by making only subsets of the data available
to the rule induction module. As a result, the rules induced were
based on incomplete information with variable levels of certainty.
The certainty level was modeled by a metric called "Strength of
Belief", which was assigned to each rule or datum as ancillary
information about the confidence in its accuracy. Two techniques
were employed to induce rules from the data subsets: decision tree
and multi-polynomial regression, respectively for the discrete and the
continuous type of target variables. The intuitive reasoner was tested
for its ability to use the induced rules to predict the classes of the
discrete target variables and the values of the continuous target
variables. The intuitive reasoner implemented two types of
reasoning: fast and broad where, by analogy to human thought, the
former corresponds to fast decision making and the latter to deeper
contemplation. . For reference, a weather data analysis approach
which had been applied on similar tasks was adopted to analyze the
complete database and create predictive models for the same 12
target variables. The values predicted by the intuitive reasoner and
the reference approach were compared with actual data. The intuitive
reasoner reached near-100% accuracy for two continuous target
variables. For the discrete target variables, the intuitive reasoner
predicted at least 70% as accurately as the reference reasoner. Since
the intuitive reasoner operated on rules derived from only about 10%
of the total data, it demonstrated the potential advantages in dealing
with sparse data sets as compared with conventional methods.
Abstract: Deaths from cardiovascular diseases have decreased substantially over the past two decades, largely as a result of advances in acute care and cardiac surgery. These developments have produced a growing population of patients who have survived a myocardial infarction. These patients need to be continuously monitored so that the initiation of treatment can be given within the crucial golden hour. The available conventional methods of monitoring mostly perform offline analysis and restrict the mobility of these patients within a hospital or room. Hence the aim of this paper is to design a Portable Cardiac Telemedicine System to aid the patients to regain their independence and return to an active work schedule, there by improving the psychological well being. The portable telemedicine system consists of a Wearable ECG Transmitter (WET) and a slightly modified mobile phone, which has an inbuilt ECG analyzer. The WET is placed on the body of the patient that continuously acquires the ECG signals from the high-risk cardiac patients who can move around anywhere. This WET transmits the ECG to the patient-s Bluetooth enabled mobile phone using blue tooth technology. The ECG analyzer inbuilt in the mobile phone continuously analyzes the heartbeats derived from the received ECG signals. In case of any panic condition, the mobile phone alerts the patients care taker by an SMS and initiates the transmission of a sample ECG signal to the doctor, via the mobile network.
Abstract: The sanitary sewerage connection rate becomes an
important indicator of advanced cities. Following the construction of
sanitary sewerages, the maintenance and management systems are
required for keeping pipelines and facilities functioning well. These
maintenance tasks often require sewer workers to enter the manholes
and the pipelines, which are confined spaces short of natural
ventilation and full of hazardous substances. Working in sewers could
be easily exposed to a risk of adverse health effects. This paper
proposes the use of Bayesian belief networks (BBN) as a higher level
of noncarcinogenic health risk assessment of sewer workers. On the
basis of the epidemiological studies, the actual hospital attendance
records and expert experiences, the BBN is capable of capturing the
probabilistic relationships between the hazardous substances in sewers
and their adverse health effects, and accordingly inferring the
morbidity and mortality of the adverse health effects. The provision of
the morbidity and mortality rates of the related diseases is more
informative and can alleviate the drawbacks of conventional methods.
Abstract: Steel surface defect detection is essentially one of
pattern recognition problems. Support Vector Machines (SVMs) are
known as one of the most proper classifiers in this application. In this
paper, we introduce a more accurate classification method by using
SVMs as our final classifier of the inspection system. In this scheme,
multiclass classification task is performed based on the "one-againstone"
method and different kernels are utilized for each pair of the
classes in multiclass classification of the different defects.
In the proposed system, a decision tree is employed in the first
stage for two-class classification of the steel surfaces to "defect" and
"non-defect", in order to decrease the time complexity. Based on
the experimental results, generated from over one thousand images,
the proposed multiclass classification scheme is more accurate than
the conventional methods and the overall system yields a sufficient
performance which can meet the requirements in steel manufacturing.
Abstract: A conventional binding method for low power in a
high-level synthesis mainly focuses on finding an optimal binding for
an assumed input data, and obtains only one binding table. In this
paper, we show that a binding method which uses multiple binding
tables gets better solution compared with the conventional methods
which use a single binding table, and propose a dynamic bus binding
scheme for low power using multiple binding tables. The proposed
method finds multiple binding tables for the proper partitions of an
input data, and switches binding tables dynamically to produce the
minimum total switching activity. Experimental result shows that the
proposed method obtains a binding solution having 12.6-28.9%
smaller total switching activity compared with the conventional
methods.
Abstract: Microwave energy is a superior alternative to several other thermal treatments. Extraction techniques are widely employed for the isolation of bioactive compounds and vegetable oils from oil seeds. Among the different and new available techniques, microwave pretreatment of seeds is a simple and desirable method for production of high quality vegetable oils. Microwave pretreatment for oil extraction has many advantages as follow: improving oil extraction yield and quality, direct extraction capability, lower energy consumption, faster processing time and reduced solvent levels compared with conventional methods. It allows also for better retention and availability of desirable nutraceuticals, such as phytosterols and tocopherols, canolol and phenolic compounds in the extracted oil such as rapeseed oil. This can be a new step to produce nutritional vegetable oils with improved shelf life because of high antioxidant content.
Abstract: The epoxidation of soybean oil at temperature of 600C
was provided the best result in terms of attaching the –OH
functionality. Temperatures below and above 600C it is likely the
attaching reaction did not proceed sufficiently fast. The considerable
yield below 40%, implies the oil is not completely converted, it is not
possible by conventional methods, because the epoxide decomposes
at the temperature required. The objective of this work was the
development of catalyst toward the conversion of epoxide and polyol
with reaction temperature at 50,60, and 700C. The effect of different
type of catalyst were studied, the effect of alcohols with different
molecular configuration was determined which leads to selective
addition of alcohols to the epoxide oils.
Abstract: A fuzzy predictive pursuit guidance is proposed as an
alternative to the conventional methods. The purpose of this scheme
is to obtain a stable and fast guidance. The noise effects must be
reduced in homing missile guidance to get an accurate control. An
aerodynamic missile model is simulated first and a fuzzy predictive
pursuit control algorithm is applied to reduce the noise effects. The
performance of this algorithm is compared with the performance of
the classical proportional derivative control. Stability analysis of the
proposed guidance method is performed and compared with the
stability properties of other guidance methods. Simulation results
show that the proposed method provides the satisfying performance.