Abstract: Sustainability and sustainable development have been
the main theme of many international conferences, such the UN Rio
de Janeiro 1992 Earth Summit This was followed by the appearance
of the global conferences at the late of the nineties and the early of
2000 to confirm the importance of the sustainable development .it
was focused on the importance of the economic development as it is
considered an effective tool in the operations of the sustainable
development. Industry plays a critical role in technological
innovations and research and development activities, which are
crucial for the economic and social development of any country.
Transportation and mobility are an important part or urban
economics and the quality of life. To analyze urban transportation
and its environmental impacts, a comprehensive approach is needed.
So this research aims to apply new approach for the development of
the urban communities that insure the continuity and facing the
deterioration. This approach aims to integrate sustainable transport
solutions with economic development and community development.
For that purpose we will concentrate on one of the most sustainable
cities in the world (Curitiba in Brazil) which provides the world with
a model in how to integrate sustainable transport considerations into
business development, road infrastructure development, and local
community development.
Abstract: The aim of this study was to investigate the pregnancy
outcomes of teenage mothers at DanKhunThot hospital, Nakhon
Ratchasima, Thailand. A retrospective descriptive study was
conducted in 573 of teenage pregnant from charts reviewed from 1st
October 2010-31st March, 2012. Data were analyzed by frequency
distribution, mean and Standard Deviation.
The results shown several problems and negatives outcomes of
pregnancy in teenager such as not attended prenatal care, Low birth
weight infants, death fetus in utero and other complications. The
results of this study can be utilized in the development of prenatal,
perinatal and post natal care services, especially in DanKhunthot
Hospital contexts. Moreover, the results were present to the District
Health Care committees in order to enhance health care service
system for teenage pregnancy of DanKhunthot District in further.
Abstract: Machine Translation, (hereafter in this document
referred to as the "MT") faces a lot of complex problems from its
origination. Extracting multiword expressions is also one of the
complex problems in MT. Finding multiword expressions during
translating a sentence from English into Urdu, through existing
solutions, takes a lot of time and occupies system resources. We have
designed a simple relational data approach, in which we simply set a
bit in dictionary (database) for multiword, to find and handle
multiword expression. This approach handles multiword efficiently.
Abstract: The flow field around a flat plate of infinite span has
been investigated for several values of the angle of attack. Numerical
predictions have been compared to experimental measurements, in
order to examine the effect of turbulence model and grid resolution
on the resultant aerodynamic forces acting on the plate. Also the
influence of the free-stream turbulence intensity, at the entrance of
the computational domain, has been investigated. A full campaign of
simulations has been conducted for three inclination angles (9°, 15°
and 30°), in order to obtain some practical guidelines to be used for
the simulation of the flow field around inclined plates and discs.
Abstract: A method to predict the column size for displacement based design of reinforced concrete frame buildings with higher target inter storey drift is reported here. The column depth derived from empirical relation as a function of given beam section, target inter-story drift, building plan features and common displacement based design parameters is used. Regarding the high drift requirement, a minimum column-beam moment capacity ratio is maintained during capacity design. The method is used in designing four, eight and twelve story frame buildings with displacement based design for three percent target inter storey drift. Non linear time history analysis of the designed buildings are performed under five artificial ground motions to show that the columns are found elastic enough to avoid column sway mechanism assuring that for the design the column size can be used with or without minor changes.
Abstract: Industrial design engineering is an information and
knowledge intensive job. Although Wikipedia offers a lot of this
information, design engineers are better served with a wiki tailored to
their job, offering information in a compact manner and functioning
as a design tool. For that reason WikID has been developed.
However for the viability of a wiki, an active user community is
essential. The main subject of this paper is a study to the influence of
the communication and the contents of WikID on the user-s
willingness to contribute.
At first the theory about a website-s first impression, general
usability guidelines and user motivation in an online community is
studied. Using this theory, the aspects of the current site are analyzed
on their suitability. These results have been verified with a
questionnaire amongst 66 industrial design engineers (or students
industrial design engineering).
The main conclusion is that design engineers are enchanted with
the existence of WikID and its knowledge structure (taxonomy) but
this structure has not become clear without any guidance. In other
words, the knowledge structure is very helpful for inspiring and
guiding design engineers through their tailored knowledge domain in
WikID but this taxonomy has to be better communicated on the main
page. Thereby the main page needs to be fitted more to the target
group preferences.
Abstract: When designing satellites, one of the major issues aside for designing its primary subsystems is to devise its thermal. The thermal management of satellites requires solving different sets of issues with regards to modelling. If the satellite is well conditioned all other parts of the satellite will have higher temperature no matter what. The main issue of thermal modelling for satellite design is really making sure that all the other points of the satellite will be within the temperature limits they are designed. The insertion of power electronics in aerospace technologies is becoming widespread and the modern electronic systems used in space must be reliable and efficient with thermal management unaffected by outer space constraints. Many advanced thermal management techniques have been developed in recent years that have application in high power electronic systems. This paper presents a Three-Dimensional Modal Transmission Line Matrix (3D-TLM) implementation of transient heat flow in space power electronics. In such kind of components heat dissipation and good thermal management are essential. Simulation provides the cheapest tool to investigate all aspects of power handling. The 3DTLM has been successful in modeling heat diffusion problems and has proven to be efficient in terms of stability and complex geometry. The results show a three-dimensional visualisation of self-heating phenomena in the device affected by outer space constraints, and will presents possible approaches for increasing the heat dissipation capability of the power modules.
Abstract: The linear SEF (Spectral Edge Frequency) parameter
and spectrum analysis method can not reflect the non-linear of EEG.
This method can not contribute to acquire real time analysis and obtain
a high confidence in the clinic due to low discrimination. To solve the
problems, the development of a new index is carried out using the
bispectrum analyzing the EEG(electroencephalogram) including the
non-linear characteristic. After analyzing the bispectrum of the 2
dimension, the most significant power spectrum density peaks appeared abundantly at the specific area in awakening and anesthesia state. These points are utilized to create the new index since many
peaks appeared at the specific area in the frequency coordinate. The measured range of an index was 0-100. An index is 20-50 at an anesthesia, while the index is 90-60 at the awake. New index could afford to effectively discriminate the awake and anesthesia state.
Abstract: Corrosion of metallic water pipelines buried below
ground surface is a function of the nature of the surrounding soil and
groundwater. This gives the importance of knowing the physical and
chemical characteristics of the pipe-s surrounding environment. The
corrosion of externally – unprotected metallic water pipelines,
specially ductile iron pipes, in localities with aggressive soil
conditions is becoming a significant problem. Anticorrosive
protection for metallic water pipelines, their fittings and accessories
is very important, because they may be attached by corrosion with
time. The tendency of a metallic substrate to corrode is a function of
the surface characteristics of the metal and of the metal/protective
film interface, the physical, electrical and electrochemical properties
of the film, and the nature of the environment in which the pipelines
system is placed. In this work the authors have looked at corrosion
problems of water pipelines and their control. The corrosive
properties of groundwater and soil environments are reviewed, and
parameters affecting corrosion are discussed. The purpose of this
work is to provide guidelines for materials selection in water and soil
environments, and how the water pipelines can be protected against
metallic corrosion.
Abstract: In this research, effect of combustion reaction
mechanism on direct initiation of detonation has been studied
numerically. For this purpose, reaction mechanism has been
simulated by using a three-step chemical kinetics model. The reaction
scheme consists sequentially of a chain-initiation and chainbranching
step, followed by a temperature -independent chaintermination.
In a previous research, the effect of chain-branching on
the direct initiation of detonation is studied. In this research effect of
chain-initiation on direct initiation of detonation is investigated. For
the investigation, first a characteristic time (τ) for each step of
mechanism, which includes effect of different kinetics parameters, is
defined. Then the effect of characteristic time of chain-initiation (τI)
on critical initiation energy is studied. It is seen that increasing τI,
causes critical initiation energy to be increased. Drawing detonation's
shock pressure diagrams for different cases, shows that in small value
of τI , kinetics has more important effect on the behavior of the wave.
Abstract: One of the approaches enabling people with amputated
limbs to establish some sort of interface with the real world includes
the utilization of the myoelectric signal (MES) from the remaining
muscles of those limbs. The MES can be used as a control input to a
multifunction prosthetic device. In this control scheme, known as the
myoelectric control, a pattern recognition approach is usually utilized
to discriminate between the MES signals that belong to different
classes of the forearm movements. Since the MES is recorded using
multiple channels, the feature vector size can become very large. In
order to reduce the computational cost and enhance the generalization
capability of the classifier, a dimensionality reduction method is
needed to identify an informative yet moderate size feature set. This
paper proposes a new fuzzy version of the well known Fisher-s
Linear Discriminant Analysis (LDA) feature projection technique.
Furthermore, based on the fact that certain muscles might contribute
more to the discrimination process, a novel feature weighting scheme
is also presented by employing Particle Swarm Optimization (PSO)
for estimating the weight of each feature. The new method, called
PSOFLDA, is tested on real MES datasets and compared with other
techniques to prove its superiority.
Abstract: This paper introduces a measure of similarity between
two clusterings of the same dataset produced by two different
algorithms, or even the same algorithm (K-means, for instance, with
different initializations usually produce different results in clustering
the same dataset). We then apply the measure to calculate the
similarity between pairs of clusterings, with special interest directed
at comparing the similarity between various machine clusterings and
human clustering of datasets. The similarity measure thus can be used
to identify the best (in terms of most similar to human) clustering
algorithm for a specific problem at hand. Experimental results
pertaining to the text categorization problem of a Portuguese corpus
(wherein a translation-into-English approach is used) are presented, as well as results on the well-known benchmark IRIS dataset. The
significance and other potential applications of the proposed measure
are discussed.
Abstract: The aim of this qualitative case study is to examine how school principals perform their new roles and responsibilities defined in accordance with the new curriculum. Of ten primary schools that the new curriculum was piloted in Istanbul in school year of 2004-2005, one school was randomly selected as the sample of the study. The participants of the study were comprised of randomly-selected 26 teachers working in the case school. To collect data, an interview schedule was developed based on the new role definitions for school principals by the National Ministry of Education. Participants were interviewed on one-to-one basis in February and March 2007. Overall results showed that the school principal was perceived to be successful in terms of the application of the new curriculum in school. According to the majority of teachers, the principal has done his best to establish the infrastructure that is necessary for successful application of the new program. In addition to these, the principal was reported to adopt a collegial and participatory leadership style by creating a positive school atmosphere that enables the school community (teachers, parents and students) to involve school more than before. Keywordscase study, curriculum implementation, school principals and curriculum
Abstract: An emotional speech recognition system for the
applications on smart phones was proposed in this study to combine
with 3G mobile communications and social networks to provide users
and their groups with more interaction and care. This study developed
a mechanism using the support vector machines (SVM) to recognize
the emotions of speech such as happiness, anger, sadness and normal.
The mechanism uses a hierarchical classifier to adjust the weights of
acoustic features and divides various parameters into the categories of
energy and frequency for training. In this study, 28 commonly used
acoustic features including pitch and volume were proposed for
training. In addition, a time-frequency parameter obtained by
continuous wavelet transforms was also used to identify the accent and
intonation in a sentence during the recognition process. The Berlin
Database of Emotional Speech was used by dividing the speech into
male and female data sets for training. According to the experimental
results, the accuracies of male and female test sets were increased by
4.6% and 5.2% respectively after using the time-frequency parameter
for classifying happy and angry emotions. For the classification of all
emotions, the average accuracy, including male and female data, was
63.5% for the test set and 90.9% for the whole data set.
Abstract: A pressure-based implicit procedure to solve Navier-
Stokes equations on a nonorthogonal mesh with collocated finite
volume formulation is used to simulate flow around the smart and
conventional flaps of spoiler under the ground effect. Cantilever
beam with uniformly varying load with roller support at the free end
is considered for smart flaps. The boundedness criteria for this
procedure are determined from a Normalized Variable diagram
(NVD) scheme. The procedure incorporates es the k -ε eddyviscosity
turbulence model. The method is first validated against
experimental data. Then, the algorithm is applied for turbulent
aerodynamic flows around a spoiler section with smart and
conventional flaps for different attack angle, flap angle and ground
clearance where the results of two flaps are compared.
Abstract: Wall-surface jet induced by the dielectric barrier
discharge (DBD) has been proposed as an actuator for active flow
control in aerodynamic applications. Discharge plasma evolution of
the DBD plasma actuator was simulated based on a simple fluid model,
in which the electron, one type of positive ion and negative ion were
taken into account. Two-dimensional simulation was conducted, and
the results are in agreement with the insights obtained from
experimental studies. The simulation results indicate that the discharge
mode changes depending on applied voltage slope; when the applied
voltage is positive-going with high applied voltage slope, the
corona-type discharge mode turns into the streamer-type discharge
mode and the threshold voltage slope is around 300 kV/ms in this
simulation. The characteristics of the electrohydrodynamic (EHD)
force, which is the source of the wall-surface jet, also change
depending on the discharge mode; the tentative peak value of the EHD
force during the positive-going voltage phase is saturated by the
periodical formation of the streamer-type discharge.
Abstract: Traditional parallel single string matching algorithms
are always based on PRAM computation model. Those algorithms
concentrate on the cost optimal design and the theoretical speed.
Based on the distributed string matching algorithm proposed by
CHEN, a practical distributed string matching algorithm architecture
is proposed in this paper. And also an improved single string matching
algorithm based on a variant Boyer-Moore algorithm is presented. We
implement our algorithm on the above architecture and the
experiments prove that it is really practical and efficient on distributed
memory machine. Its computation complexity is O(n/p + m), where n
is the length of the text, and m is the length of the pattern, and p is the
number of the processors.
Abstract: This work investigated the phenology of Parah tree
(Elateriospermum tapos) using the General Purpose Atmosphere
Plant Soil Simulator (GAPS model) to determine the amount of Plant
Available Water (PAW) in the soil. We found the correlation
between PAW and the timing of budburst and flower burst at Khao
Nan National Park, Nakhon Si Thammarat, Thailand. PAW from the
GAPS model can be used as an indicator of soil water stress. The low
amount of PAW may lead to leaf shedding in Parah trees.
Abstract: This article describes the implementation of an intelligent agent that provides recommendations for educational resources in a virtual learning environment (VLE). It aims to support pending (undeveloped) student learning activities. It begins by analyzing the proposed VLE data model entities in the recommender process. The pending student activities are then identified, which constitutes the input information for the agent. By using the attribute-based recommender technique, the information can be processed and resource recommendations can be obtained. These serve as support for pending activity development in the course. To integrate this technique, we used an ontology. This served as support for the semantic annotation of attributes and recommended files recovery.
Abstract: In this paper, the position control of an electronic
throttle actuator is outlined. The dynamic behavior of the actuator is
described with the help of an uncertain plant model. This motivates
the controller design based on the ideas of higher-order slidingmodes.
As a consequence anti-chattering techniques can be omitted.
It is shown that the same concept is applicable to estimate unmeasureable
signals. The control law and the observer are implemented on
an electronic control unit. Results achieved by numerical simulations
and real world experiments are presented and discussed.