Abstract: An active slat is developed to increase the lift and delay
the separation for a DU96-W180 airfoil. The active slat is a fixed slat
that can be closed, fully opened or intermittently opened by a rotating
vane depending on the need. Experimental results show that the active
slat has reduced the mean pressure and increased the mean velocity
on the suction side of the airfoil for all positive angles of attack,
indicating an increase of lift. The experimental data and numerical
simulations also show that the direction of actuator vane rotation can
influence the mixing of the flow streams on the suction side and
hence influence the aerodynamic performance.
Abstract: The research conducted in early seventies apparently
assumed the existence of a universal decision model for union
negotiators and furthermore tended to regard financial information as
a ‘neutral’ input into a rational decision making process. However,
research in the eighties began to question the neutrality of financial
information as an input in collective bargaining rather viewing it as a
potentially effective means for controlling the labour force.
Furthermore, this later research also started challenging the simplistic
assumptions relating particularly to union objectives which have
underpinned the earlier search for universal union decision models.
Despite the above developments there seems to be a dearth of studies
in developing countries concerning the use of financial information in
collective bargaining. This paper seeks to begin to remedy this
deficiency. Utilising a case study approach based on two enterprises,
one in the public sector and the other a multinational, the universal
decision model is rejected and it is argued that the decision whether
or not to use financial information is a contingent one and such a
contingency is largely defined by the context and environment in
which both union and management negotiators work. An attempt is
also made to identify the factors constraining as well as promoting
the use of financial information in collective bargaining, these being
regarded as unique to the organisations within which the case studies
are conducted.
Abstract: Mobile social games recently become extremely
popular, spawning a whole new entertainment culture. However,
mobile game players are fickle, quickly and easily picking up and
abandoning games. This pilot study seeks to identify factors that
influence users to discontinuing playing mobile social games. We
identified three sacrifices which can prompt users to abandon games:
monetary sacrifice, time sacrifice and privacy sacrifice. The results
showed that monetary sacrifice has a greater impact than the other two
factors in causing players to discontinue usage intention.
Abstract: The Lean Environmental Management Integration
System (LEMIS) framework development is integration between lean
core element and ISO 14001. The curiosity on the relationship
between continuous improvement and sustainability of lean
implementation has influenced this study toward LEMIS.
Characteristic of ISO 14001 standard clauses and core elements of
lean principles are explored from past studies and literature reviews.
Survey was carried out on ISO 14001 certified companies to examine
continual improvement by implementing the ISO 14001 standard.
The study found that there is a significant and positive relationship
between Lean Principles: value, value stream, flow, pull and
perfection with the ISO 14001 requirements. LEMIS is significant to
support the continuous improvement and sustainability. The
integration system can be implemented to any manufacturing
company. It gives awareness on the importance on why organizations
need to sustain its environmental management system. In the
meantime, the lean principle can be adapted in order to streamline
daily activities of the company. Throughout the study, it had proven
that there is no sacrifice or trade-off between lean principles with ISO
14001 requirements. The framework developed in the study can be
further simplified in the future, especially the method of crossing
each sub requirements of ISO 14001 standard with the core elements
of Lean principles in this study.
Abstract: In this paper the CVA computation of interest rate
swap is presented based on its rating. Rating and probability default
given by Moody’s Investors Service are used to calculate our CVA
for a specific swap with different maturities. With this computation
the influence of rating variation can be shown on CVA. Application
is made to the analysis of Greek CDS variation during the period of
Greek crisis between 2008 and 2011. The main point is the
determination of correlation between the fluctuation of Greek CDS
cumulative value and the variation of swap CVA due to change of
rating.
Abstract: The use of mobile phones is growing tremendously all
over the world. In Tanzania there are a number of operators licensed
by Tanzania Communications Regulatory Authority (TCRA) aiming
at attracting customers into their networks. So far
telecommunications market competition has been very stiff. Various
measures are being taken by mobile operators to survive in the
market. Such measure include introducing of different air time
bundles on daily, weekly and monthly at lower tariffs. Other
measures include the introduction of normal tariff, tourist package
and one network. Despite of all these strategies, there is a dynamic
competition in the market which needs to be explored. Some
influences which attract customers to choose a certain mobile
operator are of particular interest. This paper is investigating if the
network effects and Quality of Services (QoS) influence mobile
customers in selection of their mobile network operators. Seventy
seven students from high learning institutions in Dodoma
Municipality in Tanzania participated in responding to prepared
questionnaires. The data was analyzed using Statistical Package for
Social Science (SPSS) Software. The results indicate that, network
coverage does influence customers in selection of mobile operators.
In addition, this paper proposes further research in some areas
especially where the study came up with different findings from what
the theory has in place.
Abstract: Laser beam welding for the dissimilar Titanium and
Aluminium thin sheets is an emerging area which is having wider
applications in aerospace, aircraft, automotive, electronics and in
other industries due to its high speed, non-contact, precision with low
heat effects, least welding distortion, low labor costs and convenient
operation. Laser beam welding of dissimilar metal combinations are
increasingly demanded due to high energy densities with small fusion
and heat affected zones. Furthermore, no filler or electrode material is
required and contamination of weld is also very small. The present
study is to reviews the influence of different parameters like laser
power, welding speed, power density, beam diameter, focusing
distance and type of shielding gas on the mechanical properties of
dissimilar metal combinations like SS/Al, Cu/Al and Ti/Al focusing
on aluminum to other materials. Research findings reveal that Ti/Al
combination gives better metallurgical and mechanical properties
than other combinations such as SS/Al and Cu/Al.
Abstract: City shrinkage is one of the thorny problems that many
European cities have to face with nowadays. It is mainly expressed as
the decrease of population in these cities. Eastern Germany is one of
the pioneers of European shrinking cities with long shrinking history.
The paper selects one representative shrinking city Halle (Saale) in
eastern Germany as research objective, collecting and investigating
nearly 20 years (1993-2010) municipal data after the reunification of
Germany. These data based on five dimensions, which are
demographic, economic, social, spatial and environmental and total 16
eligible variables. Factor Analysis is used to deal with these variables
in order to assess the most important factors affecting shrinking Halle.
The results show that there are three main factors determine the
shrinkage of Halle, respectively named “demographical and
economical factor”, “social stability factor”, and “city vitality factor”.
The three factors act at different time period of Halle’s shrinkage: from
1993 to 1997 the demographical and economical factor played an
important role; from 1997 to 2004 the social stability factor is
significant to city shrinkage; since 2005 city vitality factor determines
the shrinkage of Halle. In recent years, the shrinkage in Halle mitigates
that shows the sign of growing population. Thus the city Halle should
focus on attaching more importance on the city vitality factor to
prevent the city from shrinkage. Meanwhile, the city should possess a
positive perspective to shift the growth-oriented development to tap
the potential of shrinking cities. This method is expected to apply to
further research and other shrinking cities
Abstract: In this paper, the influence of upstream structures on the flow patternaround and inside the wind-catcher is experimentally investigated by smoke flow visualization techniques. Wind-catchers are an important part of natural ventilation in residential buildings or public places such as shopping centers, libraries, etc. Wind-catchers might be also used in places of high urban densities; hence their potential to provide natural ventilation is dependent on the presence of upstream structures. In this study, the two-sided wind-catcher model was based on a real wind-catcher observed in the city of Yazd, Iran. The present study focuses on the flow patterns around and inside the isolated two-sided wind-catcher, and on a two-sided wind-catcher in the presence of an upstream structure. The results show that the presence of an upstream structure influences the airflow pattern force and direction. Placing a high upstream structure reverses the airflow direction inside the wind-catcher.
Abstract: The hydrogenated amorphous carbon films (α-C:H)
were deposited on p-type Si (100) substrates at different thicknesses by
radio frequency plasma enhanced chemical vapor deposition
technique (rf-PECVD). Raman spectra display asymmetric
diamond-like carbon (DLC) peaks, representative of the α-C:H films.
The decrease of intensity ID/IG ratios revealed the sp3 content arise at
different thicknesses of the α-C:H films. In terms of mechanical
properties, the high hardness and elastic modulus values showed the
elastic and plastic deformation behaviors related to sp3 content in
amorphous carbon films. Electrochemical properties showed that the
α-C:H films exhibited excellent corrosion resistance in air-saturated
3.5 wt.% NaCl solution for pH 2 at room temperature. Thickness
increasing affected the small sp2 clusters in matrix, restricting the
velocity transfer and exchange of electrons. The deposited α-C:H films
exhibited excellent mechanical properties and corrosion resistance.
Abstract: In this research article a comprehensive investigation
has been carried out to determine the effect of thermal cycle on
temperature dependent process parameters developed during gas
tungsten arc (GTA) welding of high carbon (AISI 1090) steel butt
joints. An experiment based thermal analysis has been performed to
obtain the thermal history. We have focused on different
thermophysical properties such as thermal conductivity, heat transfer
coefficient and cooling rate. Angular torch model has been utilized to
find out the surface heat flux and its variation along the fusion zone as
well as along the longitudinal direction from fusion boundary. After
welding and formation of weld pool, heat transfer coefficient varies
rapidly in the vicinity of molten weld bead and heat affected zone. To
evaluate the heat transfer coefficient near the fusion line and near the
rear end of the plate (low temperature region), established correlation
has been implemented and has been compared with empirical
correlation which is noted as coupled convective and radiation heat
transfer coefficient. Change in thermal conductivity has been
visualized by analytical model of moving point heat source. Rate of
cooling has been estimated by using 2-dimensional mathematical
expression of cooling rate and it has shown good agreement with
experimental temperature cycle. Thermophysical properties have been
varied randomly within 0 -10s time span.
Abstract: The exposure to outdoor air pollution causes lung
cancer and increases the risk of bladder cancer. Because air pollution
in urban areas is mainly caused by transportation, it is necessary to
evaluate pollutant exhaust emissions from vehicles during their realworld
use. Nevertheless their evaluation and reduction is a key
problem, especially in the cities, that account for more than 50% of
world population.
A particular attention was given to the slope variability along the
streets during each journey performed by the instrumented vehicle.
In this paper we dealt with the problem of describing a
quantitatively approach for the reconstruction of GPS coordinates and
altitude, in the context of correlation study between driving cycles /
emission / geographical location, during an experimental campaign
realized with some instrumented cars.
Finally the slope analysis can be correlated to the emission and
consumption values in a specific road position, and it could be
evaluated its influence on their behaviour.
Abstract: Due to growing concern about environmental and
social consequences throughout the world, a need has been felt to
incorporate sustainability concepts in conventional manufacturing.
This paper is an attempt to identify and evaluate drivers in
implementing sustainable manufacturing in Indian context. Nine
possible drivers for successful implementation of sustainable
manufacturing have been identified from extensive review. Further,
Decision Making Trial and Evaluation Laboratory (DEMATEL)
approach has been utilized to evaluate and categorize these identified
drivers for implementing sustainable manufacturing in to the cause
and effect groups. Five drivers (Societal Pressure and Public
Concerns; Regulations and Government Policies; Top Management
Involvement, Commitment and Support; Effective Strategies and
Activities towards Socially Responsible Manufacturing and Market
Trends) have been categorized into the cause group and four drivers
(Holistic View in Manufacturing Systems; Supplier Participation;
Building Sustainable culture in Organization; and Corporate Image
and Benefits) have been categorized into the effect group. “Societal
Pressure and Public Concerns” has been found the most critical driver
and “Corporate Image and Benefits” as least critical or the most
easily influenced driver to implementing sustainable manufacturing
in Indian context. This paper may surely help practitioners in better
understanding of these drivers and their priorities towards effective
implementation of sustainable manufacturing.
Abstract: The influence of three different types of halloysite
nanotubes (HNTs) with different dimensions, namely as camel lake
(CLA), Jarrahdale (JA) and Matauri Bay (MB), on their reinforcing
ability of ethylene propylene dine monomer (EPDM) were
investigated by varying the HNTs loading (from 0-15 phr).
Mechanical properties of the nanocomposites improved with addition
of all three HNTs, but CLA based nanocomposites exhibited a
significant enhancement compared to the other HNTs. For instance,
tensile properties of EPDM nanocomposites increased by 120%,
256% and 340% for MB, JA and CLA, respectively, with addition of
15 phr of HNTs. This could be due to the higher aspect ratio and
higher surface area of CLA compared to others. Scanning electron
microscopy (SEM) of nanocomposites at 15 phr of HNT loadings
showed low amounts of pulled-out nanotubes which confirmed the
presence of more embedded nanotubes inside the EPDM matrix, as
well as aggregates within the fracture surface of EPDM/HNT
nanocomposites
Abstract: The present study involved analysis of certain
characteristics of the perennial ryegrass (Lolium perenne L.)
genotypes collected from the natural flora of Ankara, and explores a
correlation among them. In order to evaluate the plants for breeding
purpose as per Turkey's environmental conditions, the perennial
ryegrass plants were collected from natural pasture of Ankara in 2004
and were utilized for the study. Seeds of the collected plants were
sown in pots and seedlings were prepared in a greenhouse. In 2005,
the seedlings were transplanted at 50 × 50 cm2 intervals in
Randomized Complete Blocks Design in an experimental field. In
2007 and 2008, data were recorded from the observations and
measurements of 568 perennial ryegrasses. The plant characteristics,
which were investigated, included re-growth time in spring, color,
density, growth habit, tendency to form inflorescence, time of
inflorescence, plant height, length of upper internode, spike length,
leaf length, leaf width, leaf area, leaf shape, number of spikelets per
spike, seed yield per spike and 1000 grain weight and the correlation
analyses were made using this data. Correlation coefficients were
estimated between all paired combinations of the studied traits. The
yield components exhibited varying trends of association among
themselves. Seed yield per spike showed significant and positive
association with the number of spikelets per spike, 1000 grain weight,
plant height, length of upper internode, spike length, leaf length, leaf
width, leaf area and color, but significant and negative association
with the growth habit and re-growth time in spring.
Abstract: India holds 17.5% of the world’s population but has
only 2% of the total geographical area of the world where 27.35% of
the area is categorized as wasteland due to lack of or less
groundwater. So there is a demand for excessive groundwater for
agricultural and non agricultural activities to balance its growth rate.
With this in mind, an attempt is made to find the groundwater
potential zone in Gomukhi Nadhi sub basin of Vellar River basin,
TamilNadu, India covering an area of 1146.6 Sq.Km consists of 9
blocks from Peddanaickanpalayam to Virudhachalam in the sub
basin. The thematic maps such as Geology, Geomorphology,
Lineament, Landuse and Landcover and Drainage are prepared for
the study area using IRS P6 data. The collateral data includes rainfall,
water level, soil map are collected for analysis and inference. The
digital elevation model (DEM) is generated using Shuttle Radar
Topographic Mission (SRTM) and the slope of the study area is
obtained. ArcGIS 10.1 acts as a powerful spatial analysis tool to find
out the ground water potential zones in the study area by means of
weighted overlay analysis. Each individual parameter of the thematic
maps are ranked and weighted in accordance with their influence to
increase the water level in the ground. The potential zones in the
study area are classified viz., Very Good, Good, Moderate, Poor with
its aerial extent of 15.67, 381.06, 575.38, 174.49 Sq.Km respectively.
Abstract: Taro Scarab beetles (Papuana uninodis, Coleoptera:
Scarabaeidae) inflict severe damage on important root crops and
plants such as Taro or Cocoyam, yam, sweet potatoes, oil palm and
coffee tea plants across Africa and Asia resulting in economic
hardship and starvation in some nations. Scoliid wasps and
Metarhizium anisopliae fungus - bio-control agents; are shown to be
able to control the population of Scarab beetle adults and larvae using
a newly created simulation model based on non-linear ordinary
differential equations that track the populations of the beetle life
cycle stages: egg, larva, pupa, adult and the population of the scoliid
parasitoid wasps, which attack beetle larvae. In spite of the challenge
driven by the longevity of the scarab beetles, the combined effect of
the larval wasps and the fungal bio-control agent is able to control
and drive down the population of both the adult and the beetle eggs
below the environmental carrying capacity within an interval of 120
days, offering the long term prospect of a stable and eco-friendly
environment; where the population of scarab beetles is: regulated by
parasitoid wasps and beneficial soil saprophytes.
Abstract: In this paper it was examined the influence of margin
regulation on stock market volatility in EU 1993 – 2014. Regulating
margin requirements or haircuts for securities financing transactions
has for a long time been considered as a potential tool to limit the
build-up of leverage and dampen volatility in financial markets. The
margin requirement dictates how much investors can borrow against
these securities. Margin can be an important part of investment.
Using daily and monthly stock returns and there is no convincing
evidence that EU Regulation margin requirements have served to
dampen stock market volatility. In this paper was detected the
expected negative relation between margin requirements and the
amount of margin credit outstanding. Also, it confirmed that changes
in margin requirements by the EU regulation have tended to follow
than lead changes in market volatility. For the analysis have been
used the modified Levene statistics to test whether the standard
deviation of stock returns in the 25, 50 and 100 days preceding
margin changes is the same as that in the succeeding 25, 50 and 100
days. The analysis started in May 1993 when it was first empowered
to set the initial margin requirement and the last sample was in May
2014. To test whether margin requirements influence stock market
volatility over the long term, the sample of stock returns was divided
into 14 periods, according to the 14 changes in margin requirements.
Abstract: Preparation of nanoparticles of cerium oxide and
adsorption of bovine serum albumin on them were studied. Particle
size distribution and influence of pH on zeta potential of prepared
CeO2 were determined. Average size of prepared cerium oxide
nanoparticles was 9 nm. The simultaneous measurements of the
bovine serum albumin adsorption and zeta potential determination of
the (adsorption) suspensions were carried out. The adsorption
isotherms were found to be of typical Langmuir type; values of the
bovine serum albumin adsorption capacities were calculated.
Increasing of pH led to decrease of zeta potential and decrease of
adsorption capacity of cerium oxide nanoparticles. The maximum
adsorption capacity was found for strongly acid suspension (am =
118 mg/g). The samples of nanoceria with positive zeta potential
adsorbed more bovine serum albumin on the other hand, the samples
with negative zeta potential showed little or no protein adsorption.
Surface charge or better say zeta potential of CeO2 nanoparticles
plays the key role in adsorption of proteins on such type of materials.
Abstract: Paper presents a study about dynamic effects obtained
from the dynamic load testing of the city highway bridges in Latvia
carried out from 2005 to 2012. 9 prestressed concrete bridges and 4
composite bridges were considered. 11 of 13 bridges were designed
according to the Eurocodes but two according to the previous
structural codes used in Latvia (SNIP 2.05.03-84). The dynamic
properties of the bridges were obtained by heavy vehicle passing the
bridge roadway with different driving speeds and with or without
even pavement. The obtained values of the Dynamic amplification
factor (DAF) and the bridge natural frequency were analyzed and
compared to the values of built-in traffic load models provided in
Eurocode 1. The actual DAF values for even bridge pavement in the
most cases are smaller than the value adopted in Eurocode 1. Vehicle
speed for uneven pavements significantly influence Dynamic
amplification factor values.