Abstract: In this work, we developed the concept of
supercompression, i.e., compression above the compression standard
used. In this context, both compression rates are multiplied. In fact,
supercompression is based on super-resolution. That is to say,
supercompression is a data compression technique that superpose
spatial image compression on top of bit-per-pixel compression to
achieve very high compression ratios. If the compression ratio is very
high, then we use a convolutive mask inside decoder that restores the
edges, eliminating the blur. Finally, both, the encoder and the
complete decoder are implemented on General-Purpose computation
on Graphics Processing Units (GPGPU) cards. Specifically, the
mentio-ned mask is coded inside texture memory of a GPGPU.
Abstract: This paper is intended to assist anyone with some general technical experience, but perhaps limited specific knowledge of heat transfer equipment. A characteristic of heat exchanger design is the procedure of specifying a design, heat transfer area and pressure drops and checking whether the assumed design satisfies all requirements or not. The purpose of this paper is how to design the oil cooler (heat exchanger) especially for shell-and-tube heat exchanger which is the majority type of liquid-to-liquid heat exchanger. General design considerations and design procedure are also illustrated in this paper and a flow diagram is provided as an aid of design procedure. In design calculation, the MatLAB and AutoCAD software are used. Fundamental heat transfer concepts and complex relationships involved in such exchanger are also presented in this paper. The primary aim of this design is to obtain a high heat transfer rate without exceeding the allowable pressure drop. This computer program is highly useful to design the shell-and-tube type heat exchanger and to modify existing deign.
Abstract: Recently, various services such as television and the
Internet have come to be received through various terminals.
However, we could gain greater convenience by receiving these
services through cellular phone terminals when we go out and then
continuing to receive the same services through a large screen digital
television after we have come home. However, it is necessary to go
through the same authentication processing again when using TVs
after we have come home. In this study, we have developed an
authentication method that enables users to switch terminals in
environments in which the user receives service from a server through
a terminal. Specifically, the method simplifies the authentication of
the server side when switching from one terminal to another terminal
by using previously authenticated information.
Abstract: In this paper, we propose a fully-utilized, block-based 2D DWT (discrete wavelet transform) architecture, which consists of four 1D DWT filters with two-channel QMF lattice structure. The proposed architecture requires about 2MN-3N registers to save the intermediate results for higher level decomposition, where M and N stand for the filter length and the row width of the image respectively. Furthermore, the proposed 2D DWT processes in horizontal and vertical directions simultaneously without an idle period, so that it computes the DWT for an N×N image in a period of N2(1-2-2J)/3. Compared to the existing approaches, the proposed architecture shows 100% of hardware utilization and high throughput rates. To mitigate the long critical path delay due to the cascaded lattices, we can apply the pipeline technique with four stages, while retaining 100% of hardware utilization. The proposed architecture can be applied in real-time video signal processing.
Abstract: In this paper a study on the vibration of thin
cylindrical shells with ring supports and made of functionally graded
materials (FGMs) composed of stainless steel and nickel is presented.
Material properties vary along the thickness direction of the shell
according to volume fraction power law. The cylindrical shells have
ring supports which are arbitrarily placed along the shell and impose
zero lateral deflections. The study is carried out based on third order
shear deformation shell theory (T.S.D.T). The analysis is carried out
using Hamilton-s principle. The governing equations of motion of
FGM cylindrical shells are derived based on shear deformation
theory. Results are presented on the frequency characteristics,
influence of ring support position and the influence of boundary
conditions. The present analysis is validated by comparing results
with those available in the literature.
Abstract: Flow movement in unsaturated soil can be expressed
by a partial differential equation, named Richards equation. The
objective of this study is the finding of an appropriate implicit
numerical solution for head based Richards equation. Some of the
well known finite difference schemes (fully implicit, Crank Nicolson
and Runge-Kutta) have been utilized in this study. In addition, the
effects of different approximations of moisture capacity function,
convergence criteria and time stepping methods were evaluated. Two
different infiltration problems were solved to investigate the
performance of different schemes. These problems include of vertical
water flow in a wet and very dry soils. The numerical solutions of
two problems were compared using four evaluation criteria and the
results of comparisons showed that fully implicit scheme is better
than the other schemes. In addition, utilizing of standard chord slope
method for approximation of moisture capacity function, automatic
time stepping method and difference between two successive
iterations as convergence criterion in the fully implicit scheme can
lead to better and more reliable results for simulation of fluid
movement in different unsaturated soils.
Abstract: The competitive learning is an adaptive process in
which the neurons in a neural network gradually become sensitive to
different input pattern clusters. The basic idea behind the Kohonen-s
Self-Organizing Feature Maps (SOFM) is competitive learning.
SOFM can generate mappings from high-dimensional signal spaces
to lower dimensional topological structures. The main features of this
kind of mappings are topology preserving, feature mappings and
probability distribution approximation of input patterns. To overcome
some limitations of SOFM, e.g., a fixed number of neural units and a
topology of fixed dimensionality, Growing Self-Organizing Neural
Network (GSONN) can be used. GSONN can change its topological
structure during learning. It grows by learning and shrinks by
forgetting. To speed up the training and convergence, a new variant
of GSONN, twin growing cell structures (TGCS) is presented here.
This paper first gives an introduction to competitive learning, SOFM
and its variants. Then, we discuss some GSONN with fixed
dimensionality, which include growing cell structures, its variants
and the author-s model: TGCS. It is ended with some testing results
comparison and conclusions.
Abstract: Image enhancement is the most important challenging preprocessing for almost all applications of Image Processing. By now, various methods such as Median filter, α-trimmed mean filter, etc. have been suggested. It was proved that the α-trimmed mean filter is the modification of median and mean filters. On the other hand, ε-filters have shown excellent performance in suppressing noise. In spite of their simplicity, they achieve good results. However, conventional ε-filter is based on moving average. In this paper, we suggested a new ε-filter which utilizes α-trimmed mean. We argue that this new method gives better outcomes compared to previous ones and the experimental results confirmed this claim.
Abstract: The development of entrepreneurial competences of
farmers has been pointed out as a necessary condition for the
modernization of land in facing the phenomenon of globalization.
However, the educational processes involved in such a development
have been studied little, especially in emerging economies. This
research aims to enlighten some of the critical issues behind the early
stages of the transformation of farmers into entrepreneurs, through in
depth interviews with farmers, entrepreneurial promoters and public
officials participating in a public pilot project in Mexico. Although
major impacts were expected only in the long run, important positive
changes in the mind set of farmers and other participants were found
in early stages of the intervention. Apparently, the farmers started a
process of becoming more conscious about the importance of
preserving the aquiferous resources, as well as more market and
entrepreneurial oriented.
Abstract: The condition of lightning surge causes the traveling waves and the temporary increase in voltage in the transmission line system. Lightning is the most harmful for destroying the transmission line and setting devices so it is necessary to study and analyze the temporary increase in voltage for designing and setting the surge arrester. This analysis describes the figure of the lightning wave in transmission line with 115 kV voltage level in Thailand by using ATP/EMTP program to create the model of the transmission line and lightning surge. Because of the limit of this program, it must be calculated for the geometry of the transmission line and surge parameter and calculation in the manual book for the closest value of the parameter. On the other hand, for the effects on surge protector when the lightning comes, the surge arrester model must be right and standardized as metropolitan electrical authority's standard. The candidate compared the real information to the result from calculation, also. The results of the analysis show that the temporary increase in voltage value will be rise to 326.59 kV at the line which is done by lightning when the surge arrester is not set in the system. On the other hand, the temporary increase in voltage value will be 182.83 kV at the line which is done by lightning when the surge arrester is set in the system and the period of the traveling wave is reduced, also. The distance for setting the surge arrester must be as near to the transformer as possible. Moreover, it is necessary to know the right distance for setting the surge arrester and the size of the surge arrester for preventing the temporary increase in voltage, effectively.
Abstract: An envelope echo signal measurement is proposed in
this paper using echo signal observation from the 200 kHz echo
sounder receiver. The envelope signal without any object is compared
with the envelope signal of the sphere. Two diameter size steel ball
(3.1 cm & 2.2 cm) and two diameter size air filled stainless steel ball
(4.8 cm & 7.4 cm) used in this experiment. The target was positioned
about 0.5 m and 1.0 meter from the transducer face using nylon rope.
From the echo observation in time domain, it is obviously shown that
echo signal structure is different between the size, distance and type
of metal sphere. The amplitude envelope voltage for the bigger
sphere is higher compare to the small sphere and it confirm that the
bigger sphere have higher target strength compare to the small
sphere. Although the structure signal without any object are different
compare to the signal from the sphere, the reflected signal from the
tank floor increase linearly with the sphere size. We considered this
event happened because of the object position approximately to the
tank floor.
Abstract: Amongst the consistently fluctuating conditions
prevailing today, changeability represents a strategic key factor for a
manufacturing company to achieve success on the international
markets. In order to cope with turbulences and the increasing level of
incalculability, not only the flexible design of production systems but
in particular the employee as enabler of change provide the focus
here. It is important to enable employees from manufacturing
companies to participate actively in change events and in change
decisions. To this end, the learning factory has been created, which is
intended to serve the development of change-promoting competences
and the sensitization of employees for the necessity of changes.
Abstract: This paper applies an anthropological approach to illuminate the dynamic cultural geography of Kazakhstani Korean ethnicity focusing on its turning point, the historic “Seoul Olympic Games in 1988." The Korean ethnic group was easily considered as a harmonious and homogeneous community by outsiders, but there existed deep-seated conflicts and hostilities within the ethnic group. The majority-s oppositional dichotomy of superiority and inferiority toward the minority was continuously reorganized and reinforced by difference in experience, memory and sentiment. However, such a chronic exclusive boundary was collapsed following the patriotism ignited by the Olympics held in their mother country. This paper explores the fluidity of subject by formation of the boundary in which constructed cultural differences are continuously essentialized and reproduced, and by dissolution of cultural barrier in certain contexts.
Abstract: A computer model of Quantum Theory (QT) has been
developed by the author. Major goal of the computer model was
support and demonstration of an as large as possible scope of QT.
This includes simulations for the major QT (Gedanken-) experiments
such as, for example, the famous double-slit experiment.
Besides the anticipated difficulties with (1) transforming exacting
mathematics into a computer program, two further types of problems
showed up, namely (2) areas where QT provides a complete mathematical
formalism, but when it comes to concrete applications the
equations are not solvable at all, or only with extremely high effort;
(3) QT rules which are formulated in natural language and which do
not seem to be translatable to precise mathematical expressions, nor
to a computer program.
The paper lists problems in all three categories and describes also
the possible solutions or circumventions developed for the computer
model.
Abstract: We constructed a method of phase unwrapping for a typical wave-front by utilizing the maximizer of the posterior marginal (MPM) estimate corresponding to equilibrium statistical mechanics of the three-state Ising model on a square lattice on the basis of an analogy between statistical mechanics and Bayesian inference. We investigated the static properties of an MPM estimate from a phase diagram using Monte Carlo simulation for a typical wave-front with synthetic aperture radar (SAR) interferometry. The simulations clarified that the surface-consistency conditions were useful for extending the phase where the MPM estimate was successful in phase unwrapping with a high degree of accuracy and that introducing prior information into the MPM estimate also made it possible to extend the phase under the constraint of the surface-consistency conditions with a high degree of accuracy. We also found that the MPM estimate could be used to reconstruct the original wave-fronts more smoothly, if we appropriately tuned hyper-parameters corresponding to temperature to utilize fluctuations around the MAP solution. Also, from the viewpoint of statistical mechanics of the Q-Ising model, we found that the MPM estimate was regarded as a method for searching the ground state by utilizing thermal fluctuations under the constraint of the surface-consistency condition.
Abstract: Metallic micro parts are playing an important role in micro-fabrication industry. Recently, we have demonstrated a new deformation mechanism for micro-formability of polycrystalline materials. Different depressed micro-features smaller than the grain size have been successfully fabricated on 6061 aluminum alloy (AA6061) substrates with good fidelity. To further verify this proposed deformation mechanism that grain size is not a limiting factor, we demonstrate here that in addition of depressed features, protruded micro-features on a polycrystalline substrate can similarly be fabricated.
Abstract: Nowadays, under developed countries for progress in
science and technology and decreasing the technologic gap with
developed countries, increasing the capacities and technology
transfer from developed countries. To remain competitive, industry is
continually searching for new methods to evolve their products.
Business model is one of the latest buzzwords in the Internet and
electronic business world. To be successful, organizations must look
into the needs and wants of their customers. This research attempts to
identify a specific feature of the company with a strong competitive
advantage by analyzing the cause of Customer satisfaction. Due to
the rapid development of knowledge and information technology,
business environments have become much more complicated.
Information technology can help a firm aiming to gain a competitive
advantage. This study explores the role and effect of Information
Communication Technology in Business Models and Customer
satisfaction on firms and also relationships between ICTs and
Outsourcing strategic.
Abstract: In this work, bending fatigue life of notched
specimens with various notch geometries and dimensions is
investigated by experiment and Manson-Caffin theoretical method. In
this theoretical method, fatigue life of notched specimens is
calculated using the fatigue life obtained from the experiments for
plain specimens (without notch). Three notch geometries including
∪-shape, ∨-shape and C -shape notches are considered in this
investigation. The experiments are conducted on a rotary bending
Moore machine. The specimens are made of a low carbon steel alloy,
which has wide application in industry. The stress- life curves are
captured for all notched specimen by experiment. The results indicate
that Manson-Caffin analytical method cannot adequately predict
the fatigue life of notched specimen. However, it seems that the
difference between the experiments and Manson-Caffin predictions
can be compensated by a proportional factor.
Abstract: This paper analysed the food security situation among
Nigerian rural farmers. Data collected on 202 rural farmers from
Benue State were analysed using descriptive and inferential statistics.
The study revealed that majority of the respondents (60.83%) had
medium dietary diversity. Furthermore, household daily calorie
requirement for the food secure households was 10,723 and the
household daily calorie consumption was 12,598, with a surplus
index of 0.04. The food security index was 1.16. The Household
daily per capita calorie consumption was 3,221.2. For the food
insecure households, the household daily calorie requirement was
20,213 and the household daily calorie consumption was 17,393. The
shortfall index was 0.14. The food security index was 0.88. The
Household daily per capita calorie consumption was 2,432.8. The
most commonly used coping strategies during food stress included
intercropping (99.2%), reliance on less preferred food (98.1%),
limiting portion size at meal times (85.8%) and crop diversification
(70.8%).
Abstract: In this work a new method for low complexity
image coding is presented, that permits different settings and great
scalability in the generation of the final bit stream. This coding
presents a continuous-tone still image compression system that
groups loss and lossless compression making use of finite arithmetic
reversible transforms. Both transformation in the space of color and
wavelet transformation are reversible. The transformed coefficients
are coded by means of a coding system in depending on a
subdivision into smaller components (CFDS) similar to the bit
importance codification. The subcomponents so obtained are
reordered by means of a highly configure alignment system
depending on the application that makes possible the re-configure of
the elements of the image and obtaining different importance levels
from which the bit stream will be generated. The subcomponents of
each importance level are coded using a variable length entropy
coding system (VBLm) that permits the generation of an embedded
bit stream. This bit stream supposes itself a bit stream that codes a
compressed still image. However, the use of a packing system on the
bit stream after the VBLm allows the realization of a final highly
scalable bit stream from a basic image level and one or several
improvement levels.