Abstract: recurrent neural network (RNN) is an efficient tool for
modeling production control process as well as modeling services. In
this paper one RNN was combined with regression model and were
employed in order to be checked whether the obtained data by the
model in comparison with actual data, are valid for variable process
control chart. Therefore, one maintenance process in workshop of
Esfahan Oil Refining Co. (EORC) was taken for illustration of
models. First, the regression was made for predicting the response
time of process based upon determined factors, and then the error
between actual and predicted response time as output and also the
same factors as input were used in RNN. Finally, according to
predicted data from combined model, it is scrutinized for test values
in statistical process control whether forecasting efficiency is
acceptable. Meanwhile, in training process of RNN, design of
experiments was set so as to optimize the RNN.
Abstract: Al-Murabahah is an Islamic financing facility used in
asset financing, the profit rate of the contract is determined by
components which are also being used in the conventional banking.
Such are cost of fund, overhead cost, risk premium cost and bank-s
profit margin. At the same time, the profit rate determined by Islamic
banking system also refers to Inter-Bank Offered Rate (LIBOR) in
London as a benchmark. This practice has risen arguments among
Muslim scholars in term of its validity of the contract; whether the
contract maintains the Shariah compliance or not. This paper aims to
explore the view of Shariah towards the above components practiced
by Islamic Banking in determining the profit rate of al-murabahah
asset financing in Malaysia. This is a comparative research which
applied the views of Muslim scholars from all major mazahibs in
Islamic jurisprudence and examined the practices by Islamic banks in
Malaysia for the above components. The study found that the shariah
accepts all the components with conditions. The cost of fund is
accepted as a portion of al-mudarabah-s profit, the overhead cost is
accepted as a cost of product, risk premium cost consist of business
risk and mitigation risk are accepted through the concept of alta-awun
and bank-s profit margin is accepted as a right of bank after
venturing in risky investment.
Abstract: This paper reports a new application of material accounting techniques to characterise and quantify material stocks and flows at the “neighbourhood" scale. The study area is the main campus of the University of New South Wales in Sydney, Australia. The system boundary is defined by the urban structural unit (USU), a typological construct devised to facilitate assessment of the metabolism of urban systems. A streamlined material flow analysis (MFA) was applied to quantify the stocks and flows of key construction materials within the campus USU over time, drawing on empirical data from a major campus development project. The results are reviewed to assess the efficacy of the method in supporting urban environmental evaluation and design practice, for example to facilitate estimation of significant impacts such as greenhouse gas emissions. It is concluded that linking a service (in this case, teaching students) enabled by a given product (university buildings) to the amount of materials used in creating that product offers a potential way to reduce the environmental impact of that service, through more efficient use of materials.
Abstract: A phenomenological model for species spreading which incorporates the Allee effect, a species- maximum attainable growth rate, collective dispersal rate and dispersal adaptability is presented. This builds on a well-established reaction-diffusion model for spatial spreading of invading organisms. The model is phrased in terms of the “hostility" (which quantifies the Allee threshold in relation to environmental sustainability) and dispersal adaptability (which measures how a species is able to adapt its migratory response to environmental conditions). The species- invading/retreating speed and the sharpness of the invading boundary are explicitly characterised in terms of the fundamental parameters, and analysed in detail.
Abstract: Chemical vapor deposition method was used to
produce carbon nanotubes on an iron based catalyst from acetylene.
Gas-phase samples collected from the different positions of the tubular reactor were analyzed by GC/MS. A variety of species ranging from hydrogen to naphthalene were observed and changes in their concentrations were plotted against the reactor position. Briefly benzene, toluene, styrene, indene and naphthalene were the main
higher molecular weight species and vinylacetylene and diacetylene were the important intermediates. Nanotube characterization was performed by scanning electron microscopy and transmission electron microscopy.
Abstract: The objective of this contribution is to study the
performances in terms of bit error rate, of space-time code algorithms
applied to MIMO communication in tunnels. Indeed, the channel
characteristics in a tunnel are quite different than those of urban or
indoor environment, due to the guiding effect of the tunnel.
Therefore, MIMO channel matrices have been measured in a straight
tunnel, in a frequency band around 3GHz. Correlation between array
elements and properties of the MIMO matrices are first studied as a
function of the distance between the transmitter and the receiver.
Then, owing to a software tool simulating the link, predicted values
of bit error rate are given for VLAST, OSTBC and QSTBC
algorithms applied to a MIMO configuration with 2 or 4 array
elements. Results are interpreted from the analysis of the channel
properties.
Abstract: In this work, we treat the problems related to chemical and petrochemical plants of a certain complex process taking the centrifugal compressor as an example, a system being very complex by its physical structure as well as its behaviour (surge phenomenon). We propose to study the application possibilities of the recent control approaches to the compressor behaviour, and consequently evaluate their contribution in the practical and theoretical fields. Facing the studied industrial process complexity, we choose to make recourse to fuzzy logic for analysis and treatment of its control problem owing to the fact that these techniques constitute the only framework in which the types of imperfect knowledge can jointly be treated (uncertainties, inaccuracies, etc..) offering suitable tools to characterise them. In the particular case of the centrifugal compressor, these imperfections are interpreted by modelling errors, the neglected dynamics, no modelisable dynamics and the parametric variations. The purpose of this paper is to produce a total robust nonlinear controller design method to stabilize the compression process at its optimum steady state by manipulating the gas rate flow. In order to cope with both the parameter uncertainty and the structured non linearity of the plant, the proposed method consists of a linear steady state regulation that ensures robust optimal control and of a nonlinear compensation that achieves the exact input/output linearization.
Abstract: The environmental performance of rapeseed oil (RO)
and rapeseed methyl ester(RME) from winter rape as fuels produced
in Romanian agroclimate is analyzed in this paper. The proposed
methodology is life cycle assessment (LCA) and takes into
consideration the influence of grain production and agroclimatic
conditions. This study shows favorable results first for RO and then
for RME. When compared to diesel fuel, both studied biofuels show
better results in the following impact categories: Abiotic depletion
potential (ADP), Ozone layer depletion (ODP) and Photochemical
ozone creation potential (POCP).Furthermore, the environmental
performance of the two biofuels studied can be improved by
changing the type of fertilizer used and also by using biofuels instead
of diesel in the field works.
Abstract: In this paper, the problem of finding the optimal
topological configuration of a deregulated distribution network is
considered. The new features of this paper are proposing a multiobjective
function and its application on deregulated distribution
networks for finding the optimal configuration. The multi-objective
function will be defined for minimizing total Energy Supply Costs
(ESC) and energy losses subject to load flow constraints. The
optimal configuration will be obtained by using Binary Genetic
Algorithm (BGA).The proposed method has been tested to analyze a
sample and a practical distribution networks.
Abstract: This paper describes a combined mathematicalgraphical
approach for optimum tool path planning in order to
improve machining efficiency. A methodology has been used that
stabilizes machining operations by adjusting material removal rate in
pocket milling operations while keeping cutting forces within limits.
This increases the life of cutting tool and reduces the risk of tool
breakage, machining vibration, and chatter. Case studies reveal the
fact that application of this approach could result in a slight increase
of machining time, however, a considerable reduction of tooling cost,
machining vibration, noise and chatter can be achieved in addition to
producing a better surface finish.
Abstract: The shelf life of fish was extended using disinfection
properties of ozone. For this purpose, Trout specimens were exposed
to ozone in the aqueous media for two hours and their microbial
growth and biochemical properties were measured over time.
Microbial growth of ozone treated fish was significantly slower than
control sample, resulting in lower counts of bacteria. According to
the biochemical tests; ozone treatment had no negative effects on fat,
protein and humidity of fish. Peroxide and TVN (Total Volatile
Nitrogen) measurements showed that treatment by ozone increased
the trout shelf life from 4 days to 6 days. According to the sensory
analysis, no changes were observed in color or flavor of the ozone
treated trout.
Abstract: As there has been a recognizable transition in
automotive industry from mass production to mass customization,
automobile manufacturers and their suppliers have been seeking ways
for more flexible and efficient processes. Eventually, modular
production is currently being applied to manage the changing orders of
the industry. In this paper, two different modular assembly line
concepts were studied: conveyor line and box assembly line.
Mathematical model for two assembly line concepts were developed
and their production line efficiency were compared as a performance
measure to improve their assembly line balancing.
Abstract: In this paper, we investigate dynamics of 2n almost periodic attractors for Cohen-Grossberg neural networks (CGNNs) with variable and distribute time delays. By imposing some new assumptions on activation functions and system parameters, we split invariant basin of CGNNs into 2n compact convex subsets. Then the existence of 2n almost periodic solutions lying in compact convex subsets is attained due to employment of the theory of exponential dichotomy and Schauder-s fixed point theorem. Meanwhile, we derive some new criteria for the networks to converge toward these 2n almost periodic solutions and exponential attracting domains are also given correspondingly.
Abstract: This study experimentally investigates the heat transfer effects of forced convection and natural convection under different substrate openings design. A computational fluid dynamics (CFD) model was established and implemented to verify and explain the experimental results and heat transfer behavior. It is found that different opening position will destroy the growth of the boundary layer on substrates to alter the cooling ability for both forced under low Reynolds number and natural convection. Nevertheless, having too many opening may reduce heat conduction and affect the overall heat transfer performance. This study provides future researchers with a guideline on designing and electronic package manufacturing.
Abstract: FACTS devices are used to control the power flow, to
increase the transmission capacity and to optimize the stability of the
power system. One of the most widely used FACTS devices is
Unified Power Flow Controller (UPFC). The controller used in the
control mechanism has a significantly effects on controlling of the
power flow and enhancing the system stability of UPFC. According
to this, the capability of UPFC is observed by using different control
mechanisms based on P, PI, PID and fuzzy logic controllers (FLC) in
this study. FLC was developed by taking consideration of Takagi-
Sugeno inference system in the decision process and Sugeno-s
weighted average method in the defuzzification process. Case studies
with different operating conditions are applied to prove the ability of
UPFC on controlling the power flow and the effectiveness of
controllers on the performance of UPFC. PSCAD/EMTDC program
is used to create the FLC and to simulate UPFC model.
Abstract: This research is to explore the satisfaction for senior
citizens on continuing education in Taiwan. The purpose of this
research aims at the difference on teacher-s teaching, personal
relationship, learning result, materials and environment. Through
different sexual and living area as the background variables, a
questionnaire is adopted as the methodology in this research. Three
results are found in this research. In overall, senior citizens taking
continuing education put the most important attention on personal
relationship but materials and leaning environment put the least. There
is a significant difference on personal relationship, teacher-s teaching
and research result between different sexes. Female senior citizens
attach more importance to teacher-s teaching and learning results but
male senior citizens value on personal relationship. Another
significant difference is shown on teacher-s teaching and personal
relationship because of senior citizens living area. Urban senior
citizens put importance on personal relationship and rural senior
citizens respect teacher-s teaching more.
Abstract: Regarding the multi-media property of internet and the facilities that can be provided for the users, the purpose of this paper is to investigate the users- behavioral patterns and the impact of internet on taboos of marriage. For this purpose a survey technique on the sample size amounted 403 students of governmental guidance schools of city of Mashhad in country of Iran were considered. The results showed, the process of using various internet environments depends on the degree of the users- familiarity with these sites. In order to clarify the effects of the Internet on the taboos of marriage, the non – internet parameters also considered to be controlled. The ttest held among the internet users and non-users, indicated that internet users possess lower taboos of marriage. Extraction of the effects of internet via considering the effects of non-internet parameters, indicate that addiction to the internet, creating a cordial atmosphere, emotional communication, and message attractive factors have significant effects on the family's traditional values.
Abstract: Worldwide conventional resources of fossil fuel are depleting very fast due to large scale increase in use of transport vehicles every year, therefore consumption rate of oil in transport sector alone has gone very high. In view of this, the major thrust has now been laid upon the search of alternative energy source and also for cost effective energy conversion system. The air converted into compressed form by non conventional or conventional methods can be utilized as potential working fluid for producing shaft work in the air turbine and thus offering the capability of being a zero pollution energy source. This paper deals with the mathematical modeling and performance evaluation of a small capacity compressed air driven vaned type novel air turbine. Effect of expansion action and steady flow work in the air turbine at high admission air pressure of 6 bar, for varying injection to vane angles ratios 0.2-1.6, at the interval of 0.2 and at different vane angles such as 30o, 45o, 51.4o, 60o, 72o, 90o, and 120o for 12, 8, 7, 6, 5, 4 and 3 vanes respectively at speed of rotation 2500 rpm, has been quantified and analyzed here. Study shows that the expansion power has major contribution to total power, whereas the contribution of flow work output has been found varying only up to 19.4%. It is also concluded that for variation of injection to vane angle ratios from 0.2 to 1.2, the optimal power output is seen at vane angle 90o (4 vanes) and for 1.4 to 1.6 ratios, the optimal total power is observed at vane angle 72o (5 vanes). Thus in the vaned type novel air turbine the optimum shaft power output is developed when rotor contains 4-5 vanes for almost all situations of injection to vane angle ratios from 0.2 to 1.6.
Abstract: Source code retrieval is of immense importance in the software engineering field. The complex tasks of retrieving and extracting information from source code documents is vital in the development cycle of the large software systems. The two main subtasks which result from these activities are code duplication prevention and plagiarism detection. In this paper, we propose a Mohamed Amine Ouddan, and Hassane Essafi source code retrieval system based on two-level fingerprint representation, respectively the structural and the semantic information within a source code. A sequence alignment technique is applied on these fingerprints in order to quantify the similarity between source code portions. The specific purpose of the system is to detect plagiarism and duplicated code between programs written in different programming languages belonging to the same class, such as C, Cµ, Java and CSharp. These four languages are supported by the actual version of the system which is designed such that it may be easily adapted for any programming language.
Abstract: In Secondary Surveillance Radar (SSR) systems, it is
more difficult to locate and recognise aircrafts in the neighbourhood of civil airports since aerial traffic becomes greater. Here, we propose to apply a recent Blind Source Separation (BSS) algorithm based
on Time-Frequency Analysis, in order to separate messages sent by different aircrafts and falling in the same radar beam in reception. The above source separation method involves joint-diagonalization
of a set of smoothed version of spatial Wigner-Ville distributions.
The technique makes use of the difference in the t-f signatures of the nonstationary sources to be separated. Consequently, as the SSR sources emit different messages at different frequencies, the above fitted to this new application. We applied the technique in simulation to separate SSR replies. Results are provided at the end
of the paper.