Abstract: This work has been carried out in order to provide an understanding of the physical behaviors of the flow variation of pressure and temperature in a vortex tube. A computational fluid dynamics model is used to predict the flow fields and the associated temperature separation within a Ranque–Hilsch vortex tube. The CFD model is a steady axisymmetric model (with swirl) that utilizes the standard k-ε turbulence model. The second–order numerical schemes, was used to carry out all the computations. Vortex tube with a circumferential inlet stream and an axial (cold) outlet stream and a circumferential (hot) outlet stream was considered. Performance curves (temperature separation versus cold outlet mass fraction) were obtained for a specific vortex tube with a given inlet mass flow rate. Simulations have been carried out for varying amounts of cold outlet mass flow rates. The model results have a good agreement with experimental data.
Abstract: This paper presents Simulation and experimental
study aimed at investigating the effectiveness of an adaptive artificial
neural network stabilizer on enhancing the damping torque of a
synchronous generator. For this purpose, a power system comprising
a synchronous generator feeding a large power system through a
short tie line is considered. The proposed adaptive neuro-control
system consists of two multi-layered feed forward neural networks,
which work as a plant model identifier and a controller. It generates
supplementary control signals to be utilized by conventional
controllers. The details of the interfacing circuits, sensors and
transducers, which have been designed and built for use in tests, are
presented. The synchronous generator is tested to investigate the
effect of tuning a Power System Stabilizer (PSS) on its dynamic
stability. The obtained simulation and experimental results verify the
basic theoretical concepts.
Abstract: Many high-risk pathogens that cause disease in
humans are transmitted through various food items. Food-borne
disease constitutes a major public health problem. Assessment of the
quality and safety of foods is important in human health. Rapid and
easy detection of pathogenic organisms will facilitate precautionary
measures to maintain healthy food. The Polymerase Chain Reaction
(PCR) is a handy tool for rapid detection of low numbers of bacteria.
We have designed gene specific primers for most common food
borne pathogens such as Staphylococci, Salmonella and E.coli.
Bacteria were isolated from food samples of various food outlets and
identified using gene specific PCRs. We identified Staphylococci,
Salmonella and E.coli O157 using gene specific primers by rapid and
direct PCR technique in various food samples. This study helps us in
getting a complete picture of the various pathogens that threaten to
cause and spread food borne diseases and it would also enable
establishment of a routine procedure and methodology for rapid
identification of food borne bacteria using the rapid technique of
direct PCR. This study will also enable us to judge the efficiency of
present food safety steps taken by food manufacturers and exporters.
Abstract: Partial combustion of biomass in the gasifier generates producer gas that can be used for heating purposes and as supplementary or sole fuel in internal combustion engines. In this study, the virgin biomass obtained from hingan shell is used as the feedstock for gasifier to generate producer gas. The gasifier-engine system is operated on diesel and on esters of vegetable oil of hingan in liquid fuel mode operation and then on liquid fuel and producer gas combination in dual fuel mode operation. The performance and emission characteristics of the CI engine is analyzed by running the engine in liquid fuel mode operation and in dual fuel mode operation at different load conditions with respect to maximum diesel savings in the dual fuel mode operation. It was observed that specific energy consumption in the dual fuel mode of operation is found to be in the higher side at all load conditions. The brake thermal efficiency of the engine using diesel or hingan oil methyl ester (HOME) is higher than that of dual fuel mode operation. A diesel replacement in the tune of 60% in dual fuel mode is possible with the use of hingan shell producer gas. The emissions parameters such CO, HC, NOx, CO2 and smoke are higher in the case of dual fuel mode of operation as compared to that of liquid fuel mode.
Abstract: Designing, implementing, and debugging concurrency
control algorithms in a real system is a complex, tedious, and errorprone
process. Further, understanding concurrency control
algorithms and distributed computations is itself a difficult task.
Visualization can help with both of these problems. Thus, we have
developed an exploratory environment in which people can prototype
and test various versions of concurrency control algorithms, study
and debug distributed computations, and view performance statistics
of distributed systems. In this paper, we describe the exploratory
environment and show how it can be used to explore concurrency
control algorithms for the interactive steering of distributed
computations.
Abstract: In the semiconductor manufacturing process, large
amounts of data are collected from various sensors of multiple
facilities. The collected data from sensors have several different characteristics
due to variables such as types of products, former processes
and recipes. In general, Statistical Quality Control (SQC) methods
assume the normality of the data to detect out-of-control states of
processes. Although the collected data have different characteristics,
using the data as inputs of SQC will increase variations of data,
require wide control limits, and decrease performance to detect outof-
control. Therefore, it is necessary to separate similar data groups
from mixed data for more accurate process control. In the paper,
we propose a regression tree using split algorithm based on Pearson
distribution to handle non-normal distribution in parametric method.
The regression tree finds similar properties of data from different
variables. The experiments using real semiconductor manufacturing
process data show improved performance in fault detecting ability.
Abstract: The extensive number of engineering drawing will be referred for planning process and the changes will produce a good engineering design to meet the demand in producing a new model. The advantage in reuse of engineering designs is to allow continuous product development to further improve the quality of product development, thus reduce the development costs. However, to retrieve the existing engineering drawing, it is time consuming, a complex process and are expose to errors. Engineering drawing file searching system will be proposed to solve this problem. It is essential for engineer and designer to have some sort of medium to enable them to search for drawing in the most effective way. This paper lays out the proposed research project under the area of information extraction in engineering drawing.
Abstract: A recent neurospiking coding scheme for feature extraction from biosonar echoes of various plants is examined with avariety of stochastic classifiers. Feature vectors derived are employedin well-known stochastic classifiers, including nearest-neighborhood,single Gaussian and a Gaussian mixture with EM optimization.Classifiers' performances are evaluated by using cross-validation and bootstrapping techniques. It is shown that the various classifers perform equivalently and that the modified preprocessing configuration yields considerably improved results.
Abstract: In this research, effort was made to identify and
evaluate barriers to the development of entrepreneurship among
Iranian entrepreneur women who were graduated from universities.
In this study, perspectives of thirty-seven available entrepreneur
women were examined. In order to prepare questionnaires and
receive knowledge about barriers among these women, seven cases of
entrepreneur women took part in in-depth interviews. Then, to
evaluate the importance of barriers, the researchers made a
questionnaire with closed questions in which the barriers were
classified into the following categories: personal-familial barriers;
socio-cultural barriers; economic-financial-commercial barriers; and
structural barriers. Entrepreneur women were requested to rate the
importance of each item. The results indicated that there were
different obstacles among entrepreneur women. The order of the
important barriers was as fallow: economic-financial-commercial,
structural, socio-cultural, and personal-familial.
Abstract: Majority of pepper farmers in Malaysia are using the
open-sun method for drying the pepper berries. This method is time
consuming and exposed the berries to rain and contamination. A
maintenance-friendly and properly enclosed dryer is therefore
desired. A dryer design with a solar collector and a chimney was
studied and adapted to suit the needs of small-scale pepper farmers in
Malaysia. The dryer will provide an environment with an optimum
operating temperature meant for drying pepper berries. The dryer
model was evaluated by using commercially available computational
fluid dynamic (CFD) software in order to understand the heat and
mass transfer inside the dryer. Natural convection was the only mode
of heat transportation considered in this study as in accordance to the
idea of having a simple and maintenance-friendly design. To
accommodate the effect of low buoyancy found in natural convection
driers, a biomass burner was integrated into the solar dryer design.
Abstract: Attracting ferromagnetic forces between magnet and reaction rail provide the supporting force in Electromagnetic Suspension. Miniature maglev using permanent magnets and electromagnets is based on the idea to generate the nominal magnetic force by permanent magnets and superimpose the variable magnetic field required for stabilization by currents flowing through control windings in electromagnets. Permanent magnets with a high energy density have lower power losses with regard to supporting force and magnet weight. So the advantage of the maglev using electromagnets and permanent magnets is partially reduced by the power required to feed the remaining onboard supply system so that the overall onboard power is diminished as compared to that of the electromagnet. In this paper we proposed the how to design and control the miniature maglev and confirmed the feasibility of the levitation system using electromagnets and permanent magnets through the manufacturing the miniature maglev
Abstract: If organizations like Mellat Bank want to identify its
customer market completely to reach its specified goals, it can
segment the market to offer the product package to the right segment.
Our objective is to offer a segmentation model for Iran banking
market in Mellat bank view. The methodology of this project is
combined by “segmentation on the basis of four part-quality
variables" and “segmentation on the basis of different in means".
Required data are gathered from E-Systems and researcher personal
observation. Finally, the research offers the organization that at first
step form a four dimensional matrix with 756 segments using four
variables named value-based, behavioral, activity style, and activity
level, and at the second step calculate the means of profit for every
cell of matrix in two distinguished work level (levels α1:normal
condition and α2: high pressure condition) and compare the segments
by checking two conditions that are 1- homogeneity every segment
with its sub segment and 2- heterogeneity with other segments, and
so it can do the necessary segmentation process. After all, the last
offer (more explained by an operational example and feedback
algorithm) is to test and update the model because of dynamic
environment, technology, and banking system.
Abstract: The public sector losses are the major cause of stagnant growth of Pakistan. Public sector automotive manufacturing industry is one of the major contributors of these losses. This research has been carried out in order to identify the major barriers of productivity of this industry and suggest measures for improvement. This qualitative and quantitative research consisted of informal interviews, discussions augmented by closed ended questionnaire. Three major manufacturing units were chosen for this research and responses from 103 employees were collected. It was found out in this research that numerous productivity flaws exist in the system which requires immediate attention. Besides highlighting flaws this research also suggests corrective actions and areas for future research to overcome these problems.
Abstract: Particle detection in very noisy and low contrast images
is an active field of research in image processing. In this article, a
method is proposed for the efficient detection and sizing of subsurface
spherical particles, which is used for the processing of softly fused
Au nanoparticles. Transmission Electron Microscopy is used for
imaging the nanoparticles, and the proposed algorithm has been
tested with the two-dimensional projected TEM images obtained.
Results are compared with the data obtained by transmission optical
spectroscopy, as well as with conventional circular object detection
algorithms.
Abstract: Unified Speech Audio Coding (USAC), the latest MPEG standardization for unified speech and audio coding, uses a speech/audio classification algorithm to distinguish speech and audio segments of the input signal. The quality of the recovered audio can be increased by well-designed orchestra/percussion classification and subsequent processing. However, owing to the shortcoming of the system, introducing an orchestra/percussion classification and modifying subsequent processing can enormously increase the quality of the recovered audio. This paper proposes an orchestra/percussion classification algorithm for the USAC system which only extracts 3 scales of Mel-Frequency Cepstral Coefficients (MFCCs) rather than traditional 13 scales of MFCCs and use Iterative Dichotomiser 3 (ID3) Decision Tree rather than other complex learning method, thus the proposed algorithm has lower computing complexity than most existing algorithms. Considering that frequent changing of attributes may lead to quality loss of the recovered audio signal, this paper also design a modified subsequent process to help the whole classification system reach an accurate rate as high as 97% which is comparable to classical 99%.
Abstract: Spent petroleum catalyst from Korean petrochemical
industry contains trace amount of metals such as Ni, V and Mo.
Therefore an attempt was made to recover those trace metal using
bioleaching process. Different leaching parameters such as Fe(II)
concentration, pulp density, pH, temperature and particle size of
spent catalyst particle were studied to evaluate their effects on the
leaching efficiency. All the three metal ions like Ni, V and Mo
followed dual kinetics, i.e., initial faster followed by slower rate. The
percentage of leaching efficiency of Ni and V were higher than Mo.
The leaching process followed a diffusion controlled model and the
product layer was observed to be impervious due to formation of
ammonium jarosite (NH4)Fe3(SO4)2(OH)6. In addition, the lower
leaching efficiency of Mo was observed due to a hydrophobic coating
of elemental sulfur over Mo matrix in the spent catalyst.
Abstract: The square-lattice Ising model is the simplest system
showing phase transitions (the transition between the paramagnetic
phase and the ferromagnetic phase and the transition between the
paramagnetic phase and the antiferromagnetic phase) and critical
phenomena at finite temperatures. The exact solution of the squarelattice
Ising model with free boundary conditions is not known for
systems of arbitrary size. For the first time, the exact solution of
the Ising model on the square lattice with free boundary
conditions is obtained after classifying all )
spin configurations with the microcanonical transfer matrix. Also, the
phase transitions and critical phenomena of the square-lattice Ising
model are discussed using the exact solution on the square
lattice with free boundary conditions.
Abstract: In this work, the surgical theater of a local hospital in
KSA was analyzed using simulation. The focus was on attempting to
answer questions related to how many Operating Rooms (ORs) to
open and to analyze the performance of the surgical theater in
general and mainly the Post Anesthesia Care Unit (PACU) to assist
making decisions regarding PACU staffing. The surgical theater
consists of ten operating rooms and the PACU unit which has a
maximum capacity of fifteen beds. Different sequencing rules to
sequence the surgical cases were tested and the Longest Case First
(LCF) were superior to others. The results of the different
alternatives developed and tested can be used by the manager as a
tool to plan and manage the OR and PACU
Abstract: This paper proposes a novel frequency offset (FO) estimator for orthogonal frequency division multiplexing. Simplicity is most significant feature of this algorithm and can be repeated to achieve acceptable accuracy. Also fractional and integer part of FO is estimated jointly with use of the same algorithm. To do so, instead of using conventional algorithms that usually use correlation function, we use DFT of received signal. Therefore, complexity will be reduced and we can do synchronization procedure by the same hardware that is used to demodulate OFDM symbol. Finally, computer simulation shows that the accuracy of this method is better than other conventional methods.
Abstract: Accurate loss minimization is the critical component
for efficient electrical distribution power flow .The contribution of
this work presents loss minimization in power distribution system
through feeder restructuring, incorporating DG and placement of
capacitor. The study of this work was conducted on IEEE
distribution network and India Electricity Board benchmark
distribution system. The executed experimental result of Indian
system is recommended to board and implement practically for
regulated stable output.