A Proposed Information Extraction Technique in Engineering Drawing for Reuse Design
The extensive number of engineering drawing will be referred for planning process and the changes will produce a good engineering design to meet the demand in producing a new model. The advantage in reuse of engineering designs is to allow continuous product development to further improve the quality of product development, thus reduce the development costs. However, to retrieve the existing engineering drawing, it is time consuming, a complex process and are expose to errors. Engineering drawing file searching system will be proposed to solve this problem. It is essential for engineer and designer to have some sort of medium to enable them to search for drawing in the most effective way. This paper lays out the proposed research project under the area of information extraction in engineering drawing.
[1] Bsharah, F. and Less, M.: Requirements and Strategies for the Retention
of Automotive Product Data. Computer-Aided Design 32, 145-158
(2000)
[2] Christian, A.D. & Seering, W. P.: A Model of Information Exchange in
the Design Process. ASME Design Engineering, 83(2), 323-328 (1995)
[3] Cao, Y., Wang, S.H., & Li, H.: Automatic Recognition of Tables in
Construction Tender Documents. Automation in Construction 11, 573-
584 (2002)
[4] Ab. Jabal, M. F., et al.: A Comparative Study on Extraction and
Recognition Method of CAD Data from CAD Drawings. International
Conference on Information Management and Engineering, 709-913
(2009)
[5] Lu, Z.: Detection of Text Regions from Digital Engineering Drawings.
IEEE Transactions on Pattern Analysis and Machine Intelligence, Vol.
20, No. 4, 431-439 (1998)
[6] Liu, S., McMahon, C.A., Darlington, M.J., Culley, S.J., Wild, P.J.: An
Automatic Mark-Up Approach for Structured Document Retrieval in
Engineering Design. International Journal of Advanced Manufacturing
Technology 38, 418-425 (2007)
[7] B. Prasad: Concurrent Engineering Fundamentals: Integrated Product
and Process Organization. Vol. 1, Prentice Hall, NJ (1996)
[8] David Baxter , James Gao , Keith Case , Jenny Harding , Bob Young ,
Sean Cochrane , Shilpa Dani: A Framework To Integrate Design
Knowledge Reuse And Requirements Management In Engineering
Design. Robotics and Computer-Integrated Manufacturing, v.24 n.4,
585-593 August (2008)
[9] Crabb, H.C.: The Virtual Engineer, 21st Century Product Development.
SME/ASME Press, New York (1998)
[10] Lacroix, Z: Reusing Mechanical Engineering Design. International
Conference on Information Reuse and Integration. 299-304 (2003)
[11] Hicks, B.J. et al.: A Framework for the Requirements of Capturing,
Storing and Reusing Information and Knowledge in Engineering Design.
International Journal of Information Management 22. 263-280 (2002)
[12] Antelme, R.G. et al: Engineering Reuse: a Framework for Improving
Performance. International Conference on Management of Innovation
and Technology. 444-449 (2000)
[13] Dave Hislop, Zo'e Lacroix, and Gerald Moeller: Issues in Mechanical
Engineering Design Management. SIGMOD Record, 33(2):135-138
(2004)
[14] S.G. Koh, H. Hwang, K.I. Sohn, C.S. Ko: An Optimal Ordering and
Recovery Policy for Reusable Items. Computers and Industrial
Engineering 43, 59-73 (2002)
[15] M. Simon, G. Bee, P. Moore, J.S. Pu, C. Xie: Modelling of the Life
Cycle of Products with Data Acquisition Features. Computers in
Industry 45, 112-122 (2001)
[16] Wahab, D.A. et al: The Application of Artificial Intelligence in
Optimisation of Automotive Components for Reuse. Journal of
Achievements in Materials and Manufacturing Engineering, Vol 31
Issue 2, 595-601 (2008)
[17] J. Ko, S.J. Hu, T. Huang: Reusability Assessment for Manufacturing
Systems. Annals of CIRP 54/1, 113-116 (2005)
[18] Baba, T. et al: Similarity-based Partial Image Retrieval System for
Engineering Drawings. Proceedings of the Seventh IEEE International
Symposium on Multimedia, 303-309 (2005)
[19] Fonseca, M. J. et al: Sketch-Based Retrieval of Complex Drawings
Using Hierarchical Topology and Geometry. Journal of Computer Aided
Design Vol 41 (12). 1-37 (2009)
[20] Finger, S. Design Reuse and Design Research. Keynote Address. In
Proceedings of Engineering Design Conference -98 on Design Reuse ,
June (1998)
[21] Chu, C.H., Hsu, Y. C.: Similarity Assessment of 3D Mechanical
Components for Design Reuse. Robotics and Computer-Integrated
Manufacturing, 22(4), 332-341 (2006)
[22] Ettlie, J., & Kubarek, M.: Design Reuse in Manufacturing and Services.
Journal of Product Innovation Management, 25, 457-472 (2008)
[23] Pahl, G., & Beitz, W.: Engineering Design: A Systematic Approach.
London: The Design Council (1988)
[24] Nicholas Reed, Jim Scanlan, Gary Wills, Steven T. Halliday,
Knowledge Use in an Advanced Manufacturing Environment. Design
Studies, Volume 32, Issue 3, 292-312 May (2011)
[25] Sivaloganathan, S., Shahin, T. M. M.: Design Reuse: an Overview,
Proceedings of the Institution of Mechanical Engineers - Part B -
Engineering Manufacture, 213(7), 641-655 (1999)
[26] Song, H. et al: Research and Design of Drawings Retrieval System
Based on Spatial Relationships and Shape. International Colloquium on
Computing, Communication, Control, and Management, 336-340,
(2008)
[27] Fonseca, M. J., Jorge, J. A.: Towards Content-Based Retrieval of
Technical Drawings through High-Dimensional Indexing. Computer &
Graphics 27, 61-69 (2003)
[28] Ellen Y. Do: The Right Tool at The Right Time. PhD thesis, Georgia
Institute of Technology, September (1998)
[29] Ullman, D.G.: The Mechanical Design Process, second ed., McGraw-
Hill, New York, (1997)
[30] Gunendran, A.G., Young, R.I.M.: An information and Knowledge
Framework for Multi-Perspective Design and Manufacture International
Journal of Computer Integrated Manufacturing 19 (4), 326-338 (2006)
[31] Costa, C.A., Young, R.I.M.: Product Range Models Supporting Design
Knowledge Reuse. Proceedings of the Institute of Mechanical
Engineers, Part B: Journal of Engineering Manufacture 215 (3), 323-337
(2001)
[32] Moran, N: Knowledge is the Key, Whatever Your Sector. The Financial
Times Limited, UK (1999)
[33] Dietel, J.E.: Improving Corporate Performance through Records Audits.
Information Management Journal Vol 34 No 2, 18-26 (2000)
[34] Chaffey, D., Wood, S.: Business Information Management: Improving
Performance Using Information Systems FT Prentice Hall, UK (2004)
[35] Bjork, B.C.: Electronic Document Management in Construction -
Research Issues and Results. Journal of Information Technology in
Construction (ITcon), Vol. 8, 105-117 (2003)
[36] Ward, M.: A Survey of Engineers in Their Information World. Journal
of Librarianship and Information Sciences Vol 33 No 4, 168-176 (2001)
[37] Court, A.W., Ullman, D.G., Culley, S.J.: A Comparison Between The
Provision of Information to Engineering Designers In the UK and the
USA. International Journal of Information Management Vol 18 No 6,
409-425 (1998)
[38] Ullman, D. G.: The Mechanical Design Process. McGraw Hill
Education,UK (1992)
[39] Christian, A.D., Seering, W.P.: A Model of Information Exchange in the
Design Process. ASME Design Engineering Vol 83 No 2, 323-328
(1995)
[40] Lowe, A., McMahon, C.A., Culley, S.J.: Characterising the
Requirements of Engineering Information Systems. International Journal
of Information Management Vol 24, 401-422 (2004)
[41] Tichkiewitch, S., Brissaud, D.: Methods and Tools for Co-Operative and
Integrated Design. Kluwer Academic Publishers, Dordrecht, Germany
(2004)
[42] McAlpine, H. et al.: An Investigation into the Use and Content of the
Engineer-s Logbook. Design Studies, Volume 27, Issue 4, 481-504
(2006)
[1] Bsharah, F. and Less, M.: Requirements and Strategies for the Retention
of Automotive Product Data. Computer-Aided Design 32, 145-158
(2000)
[2] Christian, A.D. & Seering, W. P.: A Model of Information Exchange in
the Design Process. ASME Design Engineering, 83(2), 323-328 (1995)
[3] Cao, Y., Wang, S.H., & Li, H.: Automatic Recognition of Tables in
Construction Tender Documents. Automation in Construction 11, 573-
584 (2002)
[4] Ab. Jabal, M. F., et al.: A Comparative Study on Extraction and
Recognition Method of CAD Data from CAD Drawings. International
Conference on Information Management and Engineering, 709-913
(2009)
[5] Lu, Z.: Detection of Text Regions from Digital Engineering Drawings.
IEEE Transactions on Pattern Analysis and Machine Intelligence, Vol.
20, No. 4, 431-439 (1998)
[6] Liu, S., McMahon, C.A., Darlington, M.J., Culley, S.J., Wild, P.J.: An
Automatic Mark-Up Approach for Structured Document Retrieval in
Engineering Design. International Journal of Advanced Manufacturing
Technology 38, 418-425 (2007)
[7] B. Prasad: Concurrent Engineering Fundamentals: Integrated Product
and Process Organization. Vol. 1, Prentice Hall, NJ (1996)
[8] David Baxter , James Gao , Keith Case , Jenny Harding , Bob Young ,
Sean Cochrane , Shilpa Dani: A Framework To Integrate Design
Knowledge Reuse And Requirements Management In Engineering
Design. Robotics and Computer-Integrated Manufacturing, v.24 n.4,
585-593 August (2008)
[9] Crabb, H.C.: The Virtual Engineer, 21st Century Product Development.
SME/ASME Press, New York (1998)
[10] Lacroix, Z: Reusing Mechanical Engineering Design. International
Conference on Information Reuse and Integration. 299-304 (2003)
[11] Hicks, B.J. et al.: A Framework for the Requirements of Capturing,
Storing and Reusing Information and Knowledge in Engineering Design.
International Journal of Information Management 22. 263-280 (2002)
[12] Antelme, R.G. et al: Engineering Reuse: a Framework for Improving
Performance. International Conference on Management of Innovation
and Technology. 444-449 (2000)
[13] Dave Hislop, Zo'e Lacroix, and Gerald Moeller: Issues in Mechanical
Engineering Design Management. SIGMOD Record, 33(2):135-138
(2004)
[14] S.G. Koh, H. Hwang, K.I. Sohn, C.S. Ko: An Optimal Ordering and
Recovery Policy for Reusable Items. Computers and Industrial
Engineering 43, 59-73 (2002)
[15] M. Simon, G. Bee, P. Moore, J.S. Pu, C. Xie: Modelling of the Life
Cycle of Products with Data Acquisition Features. Computers in
Industry 45, 112-122 (2001)
[16] Wahab, D.A. et al: The Application of Artificial Intelligence in
Optimisation of Automotive Components for Reuse. Journal of
Achievements in Materials and Manufacturing Engineering, Vol 31
Issue 2, 595-601 (2008)
[17] J. Ko, S.J. Hu, T. Huang: Reusability Assessment for Manufacturing
Systems. Annals of CIRP 54/1, 113-116 (2005)
[18] Baba, T. et al: Similarity-based Partial Image Retrieval System for
Engineering Drawings. Proceedings of the Seventh IEEE International
Symposium on Multimedia, 303-309 (2005)
[19] Fonseca, M. J. et al: Sketch-Based Retrieval of Complex Drawings
Using Hierarchical Topology and Geometry. Journal of Computer Aided
Design Vol 41 (12). 1-37 (2009)
[20] Finger, S. Design Reuse and Design Research. Keynote Address. In
Proceedings of Engineering Design Conference -98 on Design Reuse ,
June (1998)
[21] Chu, C.H., Hsu, Y. C.: Similarity Assessment of 3D Mechanical
Components for Design Reuse. Robotics and Computer-Integrated
Manufacturing, 22(4), 332-341 (2006)
[22] Ettlie, J., & Kubarek, M.: Design Reuse in Manufacturing and Services.
Journal of Product Innovation Management, 25, 457-472 (2008)
[23] Pahl, G., & Beitz, W.: Engineering Design: A Systematic Approach.
London: The Design Council (1988)
[24] Nicholas Reed, Jim Scanlan, Gary Wills, Steven T. Halliday,
Knowledge Use in an Advanced Manufacturing Environment. Design
Studies, Volume 32, Issue 3, 292-312 May (2011)
[25] Sivaloganathan, S., Shahin, T. M. M.: Design Reuse: an Overview,
Proceedings of the Institution of Mechanical Engineers - Part B -
Engineering Manufacture, 213(7), 641-655 (1999)
[26] Song, H. et al: Research and Design of Drawings Retrieval System
Based on Spatial Relationships and Shape. International Colloquium on
Computing, Communication, Control, and Management, 336-340,
(2008)
[27] Fonseca, M. J., Jorge, J. A.: Towards Content-Based Retrieval of
Technical Drawings through High-Dimensional Indexing. Computer &
Graphics 27, 61-69 (2003)
[28] Ellen Y. Do: The Right Tool at The Right Time. PhD thesis, Georgia
Institute of Technology, September (1998)
[29] Ullman, D.G.: The Mechanical Design Process, second ed., McGraw-
Hill, New York, (1997)
[30] Gunendran, A.G., Young, R.I.M.: An information and Knowledge
Framework for Multi-Perspective Design and Manufacture International
Journal of Computer Integrated Manufacturing 19 (4), 326-338 (2006)
[31] Costa, C.A., Young, R.I.M.: Product Range Models Supporting Design
Knowledge Reuse. Proceedings of the Institute of Mechanical
Engineers, Part B: Journal of Engineering Manufacture 215 (3), 323-337
(2001)
[32] Moran, N: Knowledge is the Key, Whatever Your Sector. The Financial
Times Limited, UK (1999)
[33] Dietel, J.E.: Improving Corporate Performance through Records Audits.
Information Management Journal Vol 34 No 2, 18-26 (2000)
[34] Chaffey, D., Wood, S.: Business Information Management: Improving
Performance Using Information Systems FT Prentice Hall, UK (2004)
[35] Bjork, B.C.: Electronic Document Management in Construction -
Research Issues and Results. Journal of Information Technology in
Construction (ITcon), Vol. 8, 105-117 (2003)
[36] Ward, M.: A Survey of Engineers in Their Information World. Journal
of Librarianship and Information Sciences Vol 33 No 4, 168-176 (2001)
[37] Court, A.W., Ullman, D.G., Culley, S.J.: A Comparison Between The
Provision of Information to Engineering Designers In the UK and the
USA. International Journal of Information Management Vol 18 No 6,
409-425 (1998)
[38] Ullman, D. G.: The Mechanical Design Process. McGraw Hill
Education,UK (1992)
[39] Christian, A.D., Seering, W.P.: A Model of Information Exchange in the
Design Process. ASME Design Engineering Vol 83 No 2, 323-328
(1995)
[40] Lowe, A., McMahon, C.A., Culley, S.J.: Characterising the
Requirements of Engineering Information Systems. International Journal
of Information Management Vol 24, 401-422 (2004)
[41] Tichkiewitch, S., Brissaud, D.: Methods and Tools for Co-Operative and
Integrated Design. Kluwer Academic Publishers, Dordrecht, Germany
(2004)
[42] McAlpine, H. et al.: An Investigation into the Use and Content of the
Engineer-s Logbook. Design Studies, Volume 27, Issue 4, 481-504
(2006)
@article{"International Journal of Mechanical, Industrial and Aerospace Sciences:50119", author = "Mohd Fahmi Mohamad Amran and Riza Sulaiman and Saliyah Kahar and Suziyanti Marjudi and Muhammad FairuzAbd Rauf", title = "A Proposed Information Extraction Technique in Engineering Drawing for Reuse Design", abstract = "The extensive number of engineering drawing will be referred for planning process and the changes will produce a good engineering design to meet the demand in producing a new model. The advantage in reuse of engineering designs is to allow continuous product development to further improve the quality of product development, thus reduce the development costs. However, to retrieve the existing engineering drawing, it is time consuming, a complex process and are expose to errors. Engineering drawing file searching system will be proposed to solve this problem. It is essential for engineer and designer to have some sort of medium to enable them to search for drawing in the most effective way. This paper lays out the proposed research project under the area of information extraction in engineering drawing.
", keywords = "Computer aided design, information extraction, engineering drawing, reuse design.", volume = "6", number = "2", pages = "385-5", }
