Abstract: This paper presents the design, fabrication and
evaluation of magneto-rheological damper. Semi-active control
devices have received significant attention in recent years because
they offer the adaptability of active control devices without requiring
the associated large power sources. Magneto-Rheological (MR)
dampers are semi- active control devices that use MR fluids to
produce controllable dampers. They potentially offer highly reliable
operation and can be viewed as fail-safe in that they become passive
dampers if the control hardware malfunction. The advantage of MR
dampers over conventional dampers are that they are simple in
construction, compromise between high frequency isolation and
natural frequency isolation, they offer semi-active control, use very
little power, have very quick response, has few moving parts, have a
relax tolerances and direct interfacing with electronics. Magneto-
Rheological (MR) fluids are Controllable fluids belonging to the
class of active materials that have the unique ability to change
dynamic yield stress when acted upon by an electric or magnetic
field, while maintaining viscosity relatively constant. This property
can be utilized in MR damper where the damping force is changed by
changing the rheological properties of the fluid magnetically. MR
fluids have a dynamic yield stress over Electro-Rheological fluids
(ER) and a broader operational temperature range. The objective of
this papert was to study the application of an MR damper to vibration
control, design the vibration damper using MR fluids, test and
evaluate its performance. In this paper the Rheology and the theory
behind MR fluids and their use on vibration control were studied.
Then a MR vibration damper suitable for vehicle suspension was
designed and fabricated using the MR fluid. The MR damper was
tested using a dynamic test rig and the results were obtained in the
form of force vs velocity and the force vs displacement plots. The
results were encouraging and greatly inspire further research on the
topic.
Abstract: In this work a dual laser triangulation system is presented for fast building of 2.5D textured models of objects within a production line. This scanner is designed to produce data suitable for 3D completeness inspection algorithms. For this purpose two laser projectors have been used in order to considerably reduce the problem of occlusions in the camera movement direction. Results of reconstruction of electronic boards are presented, together with a comparison with a commercial system.
Abstract: Nowadays the asynchronous learning has granted the permission to the anywhere and anything learning via the technology and E-media which give the learner more convenient. This research is about the design of the blended and online learning for the asynchronous learning of the process management subject in order to create the prototype of this subject asynchronous learning which will create the easiness and increase capability in the learning. The pattern of learning is the integration between the in-class learning and online learning via the internet. This research is mainly focused on the online learning and the online learning can be divided into 5 parts which are virtual classroom, online content, collaboration, assessment and reference material. After the system design was finished, it was evaluated and tested by 5 experts in blended learning design and 10 students which the user’s satisfaction level is good. The result is as good as the assumption so the system can be used in the process management subject for a real usage.
Abstract: Impact is one of very important subjects which always have been considered in mechanical science. Nature of impact is such that which makes its control a hard task. Therefore it is required to present the transfer of impact to other vulnerable part of a structure, when it is necessary, one of the best method of absorbing energy of impact, is by using Thin-walled tubes these tubes collapses under impact and with absorption of energy, it prevents the damage to other parts.Purpose of recent study is to survey the deformation and energy absorption of tubes with different type of cross section (rectangular or square) and with similar volumes, height, mean cross section thickness, and material under loading with different speeds. Lateral loading of tubes are quasi-static type and beside as numerical analysis, also experimental experiences has been performed to evaluate the accuracy of the results. Results from the surveys is indicates that in a same conditions which mentioned above, samples with square cross section ,absorb more energy compare to rectangular cross section, and also by increscent in speed of loading, energy absorption would be more.
Abstract: This study explored the relationship between
occupational stress and the perceived effectiveness of men and
women managers in Ghanaian organizations. The exploration is
underlined by attempt to understand the degree to which male and
female managers in Ghanaian organizations experience occupational
stress at the workplace. The purpose is to examine the sources and
extents of occupational stress experienced by male and female
managers in Ghana. Data was collected using questionnaires and
analyzed using both descriptive statistics and correlation analysis.
The results showed that female managers in Ghana are more likely to
report of more stress experiences in the workplace than their male
counterparts. The female managers are more likely to perceive role
conflict and alienation as job stressors while the male managers
perceived blocked career as a major source of workplace stress. It is
concluded that despite the female managers experiencing enormous
level of occupational stress, there was no significant differences
between their managerial effectiveness and that of the male.
Abstract: In the present article, a new method has been developed to enhance the application of equipment monitoring, which in turn results in improving condition-based maintenance economic impact in an automobile parts manufacturing factory. This study also describes how an effective software with a simple database can be utilized to achieve cost-effective improvements in maintenance performance. The most important results of this project are indicated here: 1. 63% reduction in direct and indirect maintenance costs. 2. Creating a proper database to analyse failures. 3. Creating a method to control system performance and develop it to similar systems. 4. Designing a software to analyse database and consequently create technical knowledge to face unusual condition of the system. Moreover, the results of this study have shown that the concept and philosophy of maintenance has not been understood in most Iranian industries. Thus, more investment is strongly required to improve maintenance conditions.
Abstract: This paper is concerned with the role strategic
management plays in higher education and the methods it entails.
Using the University of West Bohemia and the Czech Republic as
examples, the paper describes the methods used in furthering
strategic objectives within institutions and their different parts
(faculties, institutes). The nature of the demands faced by the
university dictates the need for a strategic framework which defines
the basic objectives and parameters of tertiary education and research
in a local, regional and national context. Sharing strategies with a
wider range of actors (universities, cities, regions, the practical
sphere) is key to laying the foundations for more efficient
cooperation.
Abstract: The drug discovery process starts with protein
identification because proteins are responsible for many functions
required for maintenance of life. Protein identification further needs
determination of protein function. Proposed method develops a
classifier for human protein function prediction. The model uses
decision tree for classification process. The protein function is
predicted on the basis of matched sequence derived features per each
protein function. The research work includes the development of a
tool which determines sequence derived features by analyzing
different parameters. The other sequence derived features are
determined using various web based tools.
Abstract: In the time of globalisation, growing uncertainty, ambiguity and change, traditional way of doing business are no longer sufficient and it is important to consider non-conventional methods and approaches to release creativity and facilitate innovation and growth. Thus, creative industries, as a natural source of creativity and innovation, draw particular attention. This paper explores feasibility of building creative partnerships between creative industries and business and brings attention to mutual benefits derived from such partnerships. Design/approach - This paper is a theoretical exploration of projects, practices and research findings addressing collaboration between creative industries and business. Thus, it concerns creative industries, arts, business and its representatives in order to define requirements for creative partnerships to work and succeed. Findings – Current practices in engaging into arts-business partnerships are still very few, although most of creative partnerships proved to be highly valuable and mutually beneficial. Certain conditions shall be provided in order to benefit from arts-business creative synergy. Originality/value- By integrating different sources of literature, this article provides a base for conducting empirical research in several dimensions within arts-business partnerships.
Abstract: Cavitation in pumps is known as the formation of
vapor bubbles due to pressure drop and collapsing these bubbles. In
some conditions, it has been observed that the formation of bubbles
occurs at the pressure side of centrifugal pump blades. In this study,
the formation of bubbles at the pressure side of blades has been
investigated. Water is used in this study as the fluid and performance
curves were depicted for different flow rates in an approximately
constant speed. The results show that when a centrifugal pump works
in low flow rates, a secondary flow namely recirculation starts to
begin. In this condition, separation of flow increases which causes
vortex formation and local pressure drop and eventually the
formation of vapor bubbles starts.
Abstract: The calculation of buckling length factor (K) for steel
frames columns is a major and governing processes to determine the
dimensions steel frame columns cross sections during design. The
buckling length of steel frames columns has a direct effect on the cost
(weight) of using cross section. A new formula is required to
determine buckling length factor (K) by simplified way. In this
research a new formula for buckling length factor (K) was established
to determine by accurate method for a limited interval of columns
ends rigidity (GA, GB). The new formula can be used ease to
evaluate the buckling length factor without needing to complicated
equations or difficult charts.
Abstract: The paper deals with calculation of the parameters of
ceramic material from a set of destruction tests of ceramic heads of
total hip joint endoprosthesis. The standard way of calculation of the
material parameters consists in carrying out a set of 3 or 4 point
bending tests of specimens cut out from parts of the ceramic material
to be analysed. In case of ceramic heads, it is not possible to cut out
specimens of required dimensions because the heads are too small (if
the cut out specimens were smaller than the normalised ones, the
material parameters derived from them would exhibit higher strength
values than those which the given ceramic material really has). On
that score, a special testing jig was made, in which 40 heads were
destructed. From the measured values of circumferential strains of the
head-s external spherical surface under destruction, the state of stress
in the head under destruction was established using the final elements
method (FEM). From the values obtained, the sought for parameters
of the ceramic material were calculated using Weibull-s weakest-link
theory.
Abstract: Liver segmentation is the first significant process for
liver diagnosis of the Computed Tomography. It segments the liver
structure from other abdominal organs. Sophisticated filtering techniques
are indispensable for a proper segmentation. In this paper, we
employ a 3D anisotropic diffusion as a preprocessing step. While
removing image noise, this technique preserve the significant parts
of the image, typically edges, lines or other details that are important
for the interpretation of the image. The segmentation task is done
by using thresholding with automatic threshold values selection and
finally the false liver region is eliminated using 3D connected component.
The result shows that by employing the 3D anisotropic filtering,
better liver segmentation results could be achieved eventhough simple
segmentation technique is used.
Abstract: Most file systems overwrite modified file data and
metadata in their original locations, while the Log-structured File
System (LFS) dynamically relocates them to other locations. We
design and implement the Evergreen file system that can select
between overwriting or relocation for each block of a file or metadata.
Therefore, the Evergreen file system can achieve superior write
performance by sequentializing write requests (similar to LFS-style
relocation) when space utilization is low and overwriting when
utilization is high. Another challenging issue is identifying
performance benefits of LFS-style relocation over overwriting on a
newly introduced SSD (Solid State Drive) which has only
Flash-memory chips and control circuits without mechanical parts.
Our experimental results measured on a SSD show that relocation
outperforms overwriting when space utilization is below 80% and vice
versa.
Abstract: This research uses computational linguistics, an area of study that employs a computer to process natural language, and aims at discerning the patterns that exist in declarative sentences used in technical texts. The approach is mathematical, and the focus is on instructional texts found on web pages. The technique developed by the author and named the MAYA Semantic Technique is used here and organized into four stages. In the first stage, the parts of speech in each sentence are identified. In the second stage, the subject of the sentence is determined. In the third stage, MAYA performs a frequency analysis on the remaining words to determine the verb and its object. In the fourth stage, MAYA does statistical analysis to determine the content of the web page. The advantage of the MAYA Semantic Technique lies in its use of mathematical principles to represent grammatical operations which assist processing and accuracy if performed on unambiguous text. The MAYA Semantic Technique is part of a proposed architecture for an entire web-based intelligent tutoring system. On a sample set of sentences, partial semantics derived using the MAYA Semantic Technique were approximately 80% accurate. The system currently processes technical text in one domain, namely Cµ programming. In this domain all the keywords and programming concepts are known and understood.
Abstract: Glazing is a process used to reduce undesirable drying or dehydration of fish during frozen or cold storage. To evaluate the effect of the time/ temperature binomial of the cryogenic frozen tunnel in the amount of glazing watera Central Composite Rotatable Design was used, with application of the Response Surface Methodology. The results reveal that the time/ temperature obtained for pink cusk-eel in experimental conditions for glazing water are similar to the industrial process, but for red fish and merluza the industrial process needs some adjustments. Control charts were established and implementedto control the amount of glazing water on sardine and merluza. They show that the freezing process was statistically controlled but there were some tendencies that must be analyzed, since the trend of sample mean values approached either of the limits, mainly in merluza. Thus, appropriate actions must be taken, in order to improve the process.
Abstract: The study is about the designed and decorative fabric printing that derived from the Five-color porcelain (Benjarong). The
researcher examined the pattern and creativity of the decorative design
of the Five-color porcelain (Benjarong) by the artists in order to apply
for contemporary arts so that young generation will acknowledge the
importance of the Five-color porcelain (Benjarong). The research methodology is both quantitative and qualitative. The researcher
conducted an in-depth interview with the operator of five-color
porcelain (Benjarong) at Ampawa, Samutsongkram. The information
from the interview can be useful and implemented for designing the
fabric patterns. The researcher found that there were many formats
and designs of the Five-color porcelain (Benjarong) from the past to the present. Its unique design can be applied for the fabric patterns
and ready-to-wear clothes properly. After advertising and showing
the work of the Five-color porcelain (Benjarong) publicly, there were
more young people interested in the Five-color porcelain (Benjarong)
than expected which exceeded the objective with positive attitudes
towards the Five-color porcelain (Benjarong).
Abstract: This paper deals with the application of Principal Component Analysis (PCA) and the Hotelling-s T2 Chart, using data collected from a drinking water treatment process. PCA is applied primarily for the dimensional reduction of the collected data. The Hotelling-s T2 control chart was used for the fault detection of the process. The data was taken from a United Utilities Multistage Water Treatment Works downloaded from an Integrated Program Management (IPM) dashboard system. The analysis of the results show that Multivariate Statistical Process Control (MSPC) techniques such as PCA, and control charts such as Hotelling-s T2, can be effectively applied for the early fault detection of continuous multivariable processes such as Drinking Water Treatment. The software package SIMCA-P was used to develop the MSPC models and Hotelling-s T2 Chart from the collected data.
Abstract: This paper proposes new enhancement models to the
methods of nonlinear anisotropic diffusion to greatly reduce speckle
and preserve image features in medical ultrasound images. By
incorporating local physical characteristics of the image, in this case
scatterer density, in addition to the gradient, into existing tensorbased
image diffusion methods, we were able to greatly improve the
performance of the existing filtering methods, namely edge
enhancing (EE) and coherence enhancing (CE) diffusion. The new
enhancement methods were tested using various ultrasound images,
including phantom and some clinical images, to determine the
amount of speckle reduction, edge, and coherence enhancements.
Scatterer density weighted nonlinear anisotropic diffusion
(SDWNAD) for ultrasound images consistently outperformed its
traditional tensor-based counterparts that use gradient only to weight
the diffusivity function. SDWNAD is shown to greatly reduce
speckle noise while preserving image features as edges, orientation
coherence, and scatterer density. SDWNAD superior performances
over nonlinear coherent diffusion (NCD), speckle reducing
anisotropic diffusion (SRAD), adaptive weighted median filter
(AWMF), wavelet shrinkage (WS), and wavelet shrinkage with
contrast enhancement (WSCE), make these methods ideal
preprocessing steps for automatic segmentation in ultrasound
imaging.
Abstract: Human skull is shown to exhibit numerous sexually dimorphic traits. Estimation of sex is a challenging task especially when a part of skull is brought for medicolegal investigation. The present research was planned to evaluate the sexing potential of the dimensions of foramen magnum in forensic identification by craniometric analysis. Length and breadth of the foramen magnum was measured using Vernier calipers and the area of foramen magnum was calculated. The length, breadth, and area of foramen magnum were found to be larger in males than females. Sexual dimorphism index was calculated to estimate the sexing potential of each variable. The study observations are suggestive of the limited utility of the craniometric analysis of foramen magnum during the examination of skull and its parts in estimation of sex.