Abstract: Since the pioneering work of Zadeh, fuzzy set theory has been applied to a myriad of areas. Song and Chissom introduced the concept of fuzzy time series and applied some methods to the enrollments of the University of Alabama. In recent years, a number of techniques have been proposed for forecasting based on fuzzy set theory methods. These methods have either used enrollment numbers or differences of enrollments as the universe of discourse. We propose using the year to year percentage change as the universe of discourse. In this communication, the approach of Jilani, Burney, and Ardil is modified by using the year to year percentage change as the universe of discourse. We use enrollment figures for the University of Alabama to illustrate our proposed method. The proposed method results in better forecasting accuracy than existing models.
Abstract: Biodiesel is traditionally produced from oleaginous
plants. On the other hand, increasing biodiesel production from these
raw materials could create problems of food supply. Producing
biodiesel from microalgae could help to overcome this difficulty,
because microalgae are rich in lipids and do not compete for arable
lands. However, no studies had compared vegetable and microalgae
oil-based biodiesel in terms of yield, viscosity and heat of
combustion. In the present study, commercial canola and microalgae
oil were therefore transesterified with methanol under a homogenous
alkali catalyst (potassium hydroxide) at 100oC for 1h. The result
showed that microalgae-based oil has a higher yield in biodiesel with
89.7% (g biodiesel/g oil) and a lower kinematic viscosity (22oC) of
4.31 mm/s2 than canola oil.
Abstract: Dextran is a D-glucose polymer which is produced by
Leuconostoc mesenteroides grown in a sucrose-rich media. The
organism was obtained from the Persian Type Culture Collection
(PTCC) and was transferred in MRS broth medium at 30°C and pH
6.8 for 24 h. After preparation of inoculums, organisms were
inoculated into five liquid fermentation media containing either
molasses or cheese whey or different combinations of cheese whey
and molasses. After certain fermentation period, the produced
dextran was separated and dried. Dextran yield was calculated and
significant differences in different media were observed.
Furthermore, FT-IR analysis was performed and the results showed
that there were no significant differences in the produced dextran
structures.
Abstract: In the present study, the response of Nili Ravi buffalo
oocytes to recombinant human follicle stimulating hormone (rhFSH)
(Organon) on meiotic maturation in vitro was examined. Oocytes
were matured in vitro in medium containing either 0 or 0.05 IU/ ml
rhFSH and the stage of nuclear maturation recorded after 24 hours.
The percentage of oocytes in the control group undergoing germinal
vesicle breakdown (GVBD) observed after 24 hours of culture was
29 % whereas as in rhFSH group the percentage was 10 % were at
this stage (P< 0.001).Thus in the presence of rhFSH, a significantly
greater number of oocytes had progressed to the more advanced
stages of nuclear maturation. Indeed, the maturation of GV
(Germinal Vesicle) stage oocytes to the metaphase II (M II) stage
after 24 hours was significantly (P< 0.0001) increased by the
addition of rhFSH (82 % VS 47 %). The percentage of degenerated
oocytes after 24 hours of culture was 24 % in control group, whereas
in rhFSH group the percentage was 8 % after 24 hours. Degeneration
of the oocytes after 24 hours was not significantly (P = 0. 9361)
decreased.
Abstract: In this paper we present a new approach to deal with
image segmentation. The fact that a single segmentation result do not
generally allow a higher level process to take into account all the
elements included in the image has motivated the consideration of
image segmentation as a multiobjective optimization problem. The
proposed algorithm adopts a split/merge strategy that uses the result
of the k-means algorithm as input for a quantum evolutionary
algorithm to establish a set of non-dominated solutions. The
evaluation is made simultaneously according to two distinct features:
intra-region homogeneity and inter-region heterogeneity. The
experimentation of the new approach on natural images has proved
its efficiency and usefulness.
Abstract: Both the minimum energy consumption and
smoothness, which is quantified as a function of jerk, are generally
needed in many dynamic systems such as the automobile and the
pick-and-place robot manipulator that handles fragile equipments.
Nevertheless, many researchers come up with either solely
concerning on the minimum energy consumption or minimum jerk
trajectory. This research paper proposes a simple yet very interesting
when combining the minimum energy and jerk of indirect jerks
approaches in designing the time-dependent system yielding an
alternative optimal solution. Extremal solutions for the cost functions
of the minimum energy, the minimum jerk and combining them
together are found using the dynamic optimization methods together
with the numerical approximation. This is to allow us to simulate
and compare visually and statistically the time history of state inputs
employed by combining minimum energy and jerk designs. The
numerical solution of minimum direct jerk and energy problem are
exactly the same solution; however, the solutions from problem of
minimum energy yield the similar solution especially in term of
tendency.
Abstract: The sensitivity of orifice plate metering to disturbed
flow (either asymmetric or swirling) is a subject of great concern to
flow meter users and manufacturers. The distortions caused by pipe
fittings and pipe installations upstream of the orifice plate are major
sources of this type of non-standard flows. These distortions can alter
the accuracy of metering to an unacceptable degree. In this work, a
multi-scale object known as metal foam has been used to generate a
predetermined turbulent flow upstream of the orifice plate. The
experimental results showed that the combination of an orifice plate
and metal foam flow conditioner is broadly insensitive to upstream
disturbances. This metal foam demonstrated a good performance in
terms of removing swirl and producing a repeatable flow profile
within a short distance downstream of the device. The results of using
a combination of a metal foam flow conditioner and orifice plate for
non-standard flow conditions including swirling flow and asymmetric
flow show this package can preserve the accuracy of metering up to
the level required in the standards.
Abstract: Soils are normally dried in either a convection oven or stove. Laboratory moisture content testing indicated that the typical drying durations for a convection oven were, 24 hours. The purpose of this study was to determine the accuracy and soil drying duration of both, moisture content and liquid limit using microwave radiation. The soils were tested with both, convection and microwave ovens. The convection oven was considered to produce the true values for both, natural moisture content and liquid limit of soils; it was, therefore, used as a basis for comparison for the results of the microwave ovens. The samples used in this study were obtained from different projects of Consulting Engineering Bureau of College of Engineering of Sulaimani University. These samples were collected from different locations and at the different depths and consist mostly of brown and light brown clay and silty clay. A total of 102 samples were prepared. 26 of them were tested for natural moisture determination, while the other 76 were used for liquid limits determination
Abstract: Querying a data source and routing data towards sink
becomes a serious challenge in static wireless sensor networks if sink
and/or data source are mobile. Many a times the event to be observed
either moves or spreads across wide area making maintenance of
continuous path between source and sink a challenge. Also, sink can
move while query is being issued or data is on its way towards sink.
In this paper, we extend our already proposed Grid Based Data
Dissemination (GBDD) scheme which is a virtual grid based
topology management scheme restricting impact of movement of
sink(s) and event(s) to some specific cells of a grid. This obviates the
need for frequent path modifications and hence maintains continuous
flow of data while minimizing the network energy consumptions.
Simulation experiments show significant improvements in network
energy savings and average packet delay for a packet to reach at sink.
Abstract: Gene expression profiling is rapidly evolving into a
powerful technique for investigating tumor malignancies. The
researchers are overwhelmed with the microarray-based platforms
and methods that confer them the freedom to conduct large-scale
gene expression profiling measurements. Simultaneously,
investigations into cross-platform integration methods have started
gaining momentum due to their underlying potential to help
comprehend a myriad of broad biological issues in tumor diagnosis,
prognosis, and therapy. However, comparing results from different
platforms remains to be a challenging task as various inherent
technical differences exist between the microarray platforms. In this
paper, we explain a simple ratio-transformation method, which can
provide some common ground for cDNA and Affymetrix platform
towards cross-platform integration. The method is based on the
characteristic data attributes of Affymetrix- and cDNA- platform. In
the work, we considered seven childhood leukemia patients and their
gene expression levels in either platform. With a dataset of 822
differentially expressed genes from both these platforms, we carried
out a specific ratio-treatment to Affymetrix data, which subsequently
showed an improvement in the relationship with the cDNA data.
Abstract: A dent is a gross distortion of the pipe cross-section.
Dent depth is defined as the maximum reduction in the diameter of
the pipe compared to the original diameter. Pipeline dent finite
element (FE) simulation and theoretical analysis are conducted in this
paper to develop an understanding of the geometric characteristics
and strain distribution in the pressurized dented pipe. Based on the
results, the magnitude of the denting force increases significantly
with increasing the internal pressure, and the maximum
circumferential and longitudinal strains increase by increasing the
internal pressure and the dent depth. The results can be used for
characterizing dents and ranking their risks to the integrity of a
pipeline.
Abstract: The aim of this paper is to investigate the influence of
market share and diversification on the nonlife insurers- performance.
The underlying relationships have been investigated in different
industries and different disciplines (economics, management...), still,
no consistency exists either in the magnitude or statistical
significance of the relationship between market share (and
diversification as well) on one side and companies- performance on
the other side. Moreover, the direction of the relationship is also
somewhat questionable. While some authors find this relationship to
be positive, the others reveal its negative association. In order to test
the influence of market share and diversification on companies-
performance in Croatian nonlife insurance industry for the period
from 1999 to 2009, we designed an empirical model in which we
included the following independent variables: firms- profitability
from previous years, market share, diversification and control
variables (i.e. ownership, industrial concentration, GDP per capita,
inflation). Using the two-step generalized method of moments
(GMM) estimator we found evidence of a positive and statistically
significant influence of both, market share and diversification, on
insurers- profitability.
Abstract: Light is one of the most important qualitative and
symbolic factors and has a special position in architecture and urban
development in regard to practical function. The main function of
light, either natural or artificial, is lighting up the environment and
the constructional forms which is called lighting. However, light is
used to redefine the urban spaces by architectural genius with regard
to three aesthetic, conceptual and symbolic factors. In architecture
and urban development, light has a function beyond lighting up the
environment, and the designers consider it as one of the basic
components. The present research aims at studying the function of
light and color in architectural view and their effects in buildings.
Abstract: The traditional software product and process metrics
are neither suitable nor sufficient in measuring the complexity of
software components, which ultimately is necessary for quality and
productivity improvement within organizations adopting CBSE.
Researchers have proposed a wide range of complexity metrics for
software systems. However, these metrics are not sufficient for
components and component-based system and are restricted to the
module-oriented systems and object-oriented systems. In this
proposed study it is proposed to find the complexity of the JavaBean
Software Components as a reflection of its quality and the component
can be adopted accordingly to make it more reusable. The proposed
metric involves only the design issues of the component and does not
consider the packaging and the deployment complexity. In this way,
the software components could be kept in certain limit which in turn
help in enhancing the quality and productivity.
Abstract: This paper presents a method to support dynamic
packing in cases when no collision-free path can be found. The
method, which is primarily based on path planning and shrinking of
geometries, suggests a minimal geometry design change that results
in a collision-free assembly path. A supplementing approach to
optimize geometry design change with respect to redesign cost is
described. Supporting this dynamic packing method, a new method
to shrink geometry based on vertex translation, interweaved with
retriangulation, is suggested. The shrinking method requires neither
tetrahedralization nor calculation of medial axis and it preserves the
topology of the geometry, i.e. holes are neither lost nor introduced.
The proposed methods are successfully applied on industrial
geometries.
Abstract: Batch adsorption of recalcitrant melanoidin using the abundantly available coal fly ash was carried out. It had low specific surface area (SBET) of 1.7287 m2/g and pore volume of 0.002245 cm3/g while qualitative evaluation of the predominant phases in it was done by XRD analysis. Colour removal efficiency was found to be dependent on various factors studied. Maximum colour removal was achieved around pH 6, whereas increasing sorbent mass from 10g/L to 200 g/L enhanced colour reduction from 25% to 86% at 298 K. Spontaneity of the process was suggested by negative Gibbs free energy while positive values for enthalpy change showed endothermic nature of the process. Non-linear optimization of error functions resulted in Freundlich and Redlich-Peterson isotherms describing sorption equilibrium data best. The coal fly ash had maximum sorption capacity of 53 mg/g and could thus be used as a low cost adsorbent in melanoidin removal.
Abstract: Glomerular filtration rate (GFR) is a measure of
kidney function. It is usually estimated from serum concentrations of
cystatin C or creatinine although there has been considerable debate
in the literature about (i) the best equation to use and (ii) the
variability in the correlation between the concentrations of creatinine
and cystatin C. The equations for GFR can be written in a general
form and from these I calculate the error of the GFR estimates
associated with analyte measurement error. These show that the
error of the GFR estimates is such that it is not possible to distinguish
between the equations over much of the concentration range of either
analyte. The general forms of the equations are also used to derive
an expression for the concentration of cystatin C as a function of the
concentration of creatinine. This equation shows that these analyte
concentrations are not linearly related. Clinical reports of cystatin C
and creatinine concentration are consistent with the expression
derived.
Abstract: Towards the end of 19th century, the discovery of tin
and the growing importance of rubber, had led Malaya to once again
become the centre of attraction to western colonization, which later
on caused the region to be influxed by cheap labour from China and
India. One of the factors which attracted the alien communities was
the characteristics of social relation offered by the Malays. If one
analyzes the history of social relation of the Malays either among
themselves or their relation with alien communities, it is apparent that
the community places high regards to values such as tolerant,
cooperative, respectful and helpful with each other. In fact, all these
values are deeply rooted in the value of 'budi'. With the arrival of
Islam, the value of 'budi' had been well assimilated with Islamic
values thus giving birth to the value of 'budi-Islam'. Through 'budi-
Islam', the Malay conducted their dealings with British as well the
other communities during the time of peace or conflict. This value is
well nurtured due to the geographical circumstances like the fertile,
naturally rich land and bountiful marine life. Besides, a set of Malay
customs known as 'adat' custom contributed in enhancing the values
of budi.
Abstract: Gene, principal unit of inheritance, is an ordered
sequence of nucleotides. The genes of eukaryotic organisms include
alternating segments of exons and introns. The region of
Deoxyribonucleic acid (DNA) within a gene containing instructions
for coding a protein is called exon. On the other hand, non-coding
regions called introns are another part of DNA that regulates gene
expression by removing from the messenger Ribonucleic acid (RNA)
in a splicing process. This paper proposes to determine splice
junctions that are exon-intron boundaries by analyzing DNA
sequences. A splice junction can be either exon-intron (EI) or intron
exon (IE). Because of the popularity and compatibility of the
artificial neural network (ANN) in genetic fields; various ANN
models are applied in this research. Multi-layer Perceptron (MLP),
Radial Basis Function (RBF) and Generalized Regression Neural
Networks (GRNN) are used to analyze and detect the splice junctions
of gene sequences. 10-fold cross validation is used to demonstrate
the accuracy of networks. The real performances of these networks
are found by applying Receiver Operating Characteristic (ROC)
analysis.
Abstract: A high performance computer includes a fast
processor and millions bytes of memory. During the data processing,
huge amount of information are shuffled between the memory and
processor. Because of its small size and its effectiveness speed, cache
has become a common feature of high performance computers.
Enhancing cache performance proved to be essential in the speed up
of cache-based computers. Most enhancement approaches can be
classified as either software based or hardware controlled. The
performance of the cache is quantified in terms of hit ratio or miss
ratio. In this paper, we are optimizing the cache performance based
on enhancing the cache hit ratio. The optimum cache performance is
obtained by focusing on the cache hardware modification in the way
to make a quick rejection to the missed line's tags from the hit-or
miss comparison stage, and thus a low hit time for the wanted line in
the cache is achieved. In the proposed technique which we called
Even- Odd Tabulation (EOT), the cache lines come from the main
memory into cache are classified in two types; even line's tags and
odd line's tags depending on their Least Significant Bit (LSB). This
division is exploited by EOT technique to reject the miss match line's
tags in very low time compared to the time spent by the main
comparator in the cache, giving an optimum hitting time for the
wanted cache line. The high performance of EOT technique against
the familiar mapping technique FAM is shown in the simulated
results.