Abstract: A new and cost effective robotic device was designed
for remote tele surgery using dual tone multi frequency technology
(DTMF). Tele system with Dual Tone Multiple Frequency has a large
capability in sending and receiving of data in hardware and software.
The robot consists of DC motors for arm movements and it is
controlled manually through a mobile phone through DTMF
Technology. The system enables the surgeon from base station to
send commands through mobile phone to the patient’s robotic system
which includes two robotic arms that translate the input into actual
instrument manipulation. A mobile phone attached to the
microcontroller 8051 which can activate robot through relays. The
Remote robot-assisted tele surgery eliminates geographic constraints
for getting surgical expertise where it is needed and allows an expert
surgeon to teach or proctor the performance of surgical technique by
real-time intervention.
Abstract: Mobile Picture Puzzle is a mobile game application where the player use existing images stored in the mobile phone to create a puzzle to be played. This traditional picture puzzle is not so challenging once the player is familiar with the game. The objective of the developed mobile game application is to have a similar mobile game application that can provide the player with more challenging gaming experience. The developed mobile game application is also a mobile picture puzzle game application to create a puzzle to be played but instead of just using existing images that are stored, the personalised capability allows the player to use the built-in camera phone to capture an image and use the newly captured image to create the puzzle. The development of the mobile game application uses Symbian Operating System (OS), Mobile Media API (Application Programming Interface), Record Management System (RMS) storage and TiledLayer class from Game API.
Abstract: This research focus on the intrusion detection system (IDS) development which using artificial immune system (AIS) with population based incremental learning (PBIL). AIS have powerful distinguished capability to extirpate antigen when the antigen intrude into human body. The PBIL is based on past learning experience to adjust new learning. Therefore we propose an intrusion detection system call PBIL-AIS which combine two approaches of PBIL and AIS to evolution computing. In AIS part we design three mechanisms such as clonal selection, negative selection and antibody level to intensify AIS performance. In experimental result, our PBIL-AIS IDS can capture high accuracy when an intrusion connection attacks.
Abstract: The aim of this paper is to rank the impact of Object
Oriented(OO) metrics in fault prediction modeling using Artificial
Neural Networks(ANNs). Past studies on empirical validation of
object oriented metrics as fault predictors using ANNs have focused
on the predictive quality of neural networks versus standard
statistical techniques. In this empirical study we turn our attention to
the capability of ANNs in ranking the impact of these explanatory
metrics on fault proneness. In ANNs data analysis approach, there is
no clear method of ranking the impact of individual metrics. Five
ANN based techniques are studied which rank object oriented
metrics in predicting fault proneness of classes. These techniques are
i) overall connection weights method ii) Garson-s method iii) The
partial derivatives methods iv) The Input Perturb method v) the
classical stepwise methods. We develop and evaluate different
prediction models based on the ranking of the metrics by the
individual techniques. The models based on overall connection
weights and partial derivatives methods have been found to be most
accurate.
Abstract: This research intends to introduce a new usage of Artificial Intelligent (AI) approaches in Stepping Stone Detection (SSD) fields of research. By using Self-Organizing Map (SOM) approaches as the engine, through the experiment, it is shown that SOM has the capability to detect the number of connection chains that involved in a stepping stones. Realizing that by counting the number of connection chain is one of the important steps of stepping stone detection and it become the research focus currently, this research has chosen SOM as the AI techniques because of its capabilities. Through the experiment, it is shown that SOM can detect the number of involved connection chains in Network-based Stepping Stone Detection (NSSD).
Abstract: An information procuring and processing emerging technology wireless sensor network (WSN) Consists of autonomous nodes with versatile devices underpinned by applications. Nodes are equipped with different capabilities such as sensing, computing, actuation and wireless communications etc. based on application requirements. A WSN application ranges from military implementation in the battlefield, environmental monitoring, health sector as well as emergency response of surveillance. The nodes are deployed independently to cooperatively monitor the physical and environmental conditions. The architecture of WSN differs based on the application requirements and focus on low cost, flexibility, fault tolerance capability, deployment process as well as conserve energy. In this paper we have present the characteristics, architecture design objective and architecture of WSN
Abstract: Effect of geometry on crushing behavior, energy absorption and failure mode of woven roving jute fiber/epoxy laminated composite tubes were experimentally studied. Investigations were carried out on three different geometrical types of composite tubes (circular, square and radial corrugated) subjected to axial compressive loading. It was observed in axial crushing study that the load bearing capability is significantly influenced by corrugation geometry. The influence of geometries of specimens was supported by the plotted load – displacement curves of the tests.
Abstract: When designing satellites, one of the major issues aside for designing its primary subsystems is to devise its thermal. The thermal management of satellites requires solving different sets of issues with regards to modelling. If the satellite is well conditioned all other parts of the satellite will have higher temperature no matter what. The main issue of thermal modelling for satellite design is really making sure that all the other points of the satellite will be within the temperature limits they are designed. The insertion of power electronics in aerospace technologies is becoming widespread and the modern electronic systems used in space must be reliable and efficient with thermal management unaffected by outer space constraints. Many advanced thermal management techniques have been developed in recent years that have application in high power electronic systems. This paper presents a Three-Dimensional Modal Transmission Line Matrix (3D-TLM) implementation of transient heat flow in space power electronics. In such kind of components heat dissipation and good thermal management are essential. Simulation provides the cheapest tool to investigate all aspects of power handling. The 3DTLM has been successful in modeling heat diffusion problems and has proven to be efficient in terms of stability and complex geometry. The results show a three-dimensional visualisation of self-heating phenomena in the device affected by outer space constraints, and will presents possible approaches for increasing the heat dissipation capability of the power modules.
Abstract: One of the approaches enabling people with amputated
limbs to establish some sort of interface with the real world includes
the utilization of the myoelectric signal (MES) from the remaining
muscles of those limbs. The MES can be used as a control input to a
multifunction prosthetic device. In this control scheme, known as the
myoelectric control, a pattern recognition approach is usually utilized
to discriminate between the MES signals that belong to different
classes of the forearm movements. Since the MES is recorded using
multiple channels, the feature vector size can become very large. In
order to reduce the computational cost and enhance the generalization
capability of the classifier, a dimensionality reduction method is
needed to identify an informative yet moderate size feature set. This
paper proposes a new fuzzy version of the well known Fisher-s
Linear Discriminant Analysis (LDA) feature projection technique.
Furthermore, based on the fact that certain muscles might contribute
more to the discrimination process, a novel feature weighting scheme
is also presented by employing Particle Swarm Optimization (PSO)
for estimating the weight of each feature. The new method, called
PSOFLDA, is tested on real MES datasets and compared with other
techniques to prove its superiority.
Abstract: The purpose of this research is to develop and apply the
RSCMAC to enhance the dynamic accuracy of Global Positioning
System (GPS). GPS devices provide services of accurate positioning,
speed detection and highly precise time standard for over 98% area on
the earth. The overall operation of Global Positioning System includes
24 GPS satellites in space; signal transmission that includes 2
frequency carrier waves (Link 1 and Link 2) and 2 sets random
telegraphic codes (C/A code and P code), on-earth monitoring stations
or client GPS receivers. Only 4 satellites utilization, the client position
and its elevation can be detected rapidly. The more receivable
satellites, the more accurate position can be decoded. Currently, the
standard positioning accuracy of the simplified GPS receiver is greatly
increased, but due to affected by the error of satellite clock, the
troposphere delay and the ionosphere delay, current measurement
accuracy is in the level of 5~15m. In increasing the dynamic GPS
positioning accuracy, most researchers mainly use inertial navigation
system (INS) and installation of other sensors or maps for the
assistance. This research utilizes the RSCMAC advantages of fast
learning, learning convergence assurance, solving capability of
time-related dynamic system problems with the static positioning
calibration structure to improve and increase the GPS dynamic
accuracy. The increasing of GPS dynamic positioning accuracy can be
achieved by using RSCMAC system with GPS receivers collecting
dynamic error data for the error prediction and follows by using the
predicted error to correct the GPS dynamic positioning data. The
ultimate purpose of this research is to improve the dynamic positioning
error of cheap GPS receivers and the economic benefits will be
enhanced while the accuracy is increased.
Abstract: Process control and energy conservation are the two
primary reasons for using an adjustable speed drive. However,
voltage sags are the most important power quality problems facing
many commercial and industrial customers. The development of
boost converters has raised much excitement and speculation
throughout the electric industry. Now utilities are looking to these
devices for performance improvement and reliability in a variety of
areas. Examples of these include sags, spikes, or transients in supply
voltage as well as unbalanced voltages, poor electrical system
grounding, and harmonics. In this paper, simulations results are
presented for the verification of the proposed boost converter
topology. Boost converter provides ride through capability during
sag and swell. Further, input currents are near sinusoidal. This
eliminates the need of braking resistor also.
Abstract: Business Process Modeling (BPM) is the first and
most important step in business process management lifecycle. Graph
based formalism and rule based formalism are the two most
predominant formalisms on which process modeling languages are
developed. BPM technology continues to face challenges in coping
with dynamic business environments where requirements and goals
are constantly changing at the execution time. Graph based
formalisms incur problems to react to dynamic changes in Business
Process (BP) at the runtime instances. In this research, an adaptive
and flexible framework based on the integration between Object
Oriented diagramming technique and Petri Net modeling language is
proposed in order to support change management techniques for
BPM and increase the representation capability for Object Oriented
modeling for the dynamic changes in the runtime instances. The
proposed framework is applied in a higher education environment to
achieve flexible, updatable and dynamic BP.
Abstract: Present wireless communication demands compact and intelligent devices with multitasking capabilities at affordable cost. The focus in the presented paper is on a dual band antenna for wireless communication with the capability of operating at two frequency bands with same structure. Two resonance frequencies are observed with the second operation band at 4.2GHz approximately three times the first resonance frequency at 1.5GHz. Structure is simple loop of microstrip line with characteristic impedance 50 ohms. The proposed antenna is designed using defective ground structure (DGS) and shows the nearly one third reductions in size as compared to without DGS. This antenna was simulated on electromagnetic (EM) simulation software and fabricated using microwave integrated circuit technique on RT-Duroid dielectric substrate (εr= 2.22) of thickness (H=15 mils). The designed antenna was tested on automatic network analyzer and shows the good agreement with simulated results. The proposed structure is modeled into an equivalent electrical circuit and simulated on circuit simulator. Subsequently, theoretical analysis was carried out and simulated. The simulated, measured, equivalent circuit response, and theoretical results shows good resemblance. The bands of operation draw many potential applications in today’s wireless communication.
Abstract: In recent years Operational Transconductance Amplifier based high frequency integrated circuits, filters and systems have been widely investigated. The usefulness of OTAs over conventional OP-Amps in the design of both first order and second order active filters are well documented. This paper discusses some of the tunability issues using the Matlab/Simulink® software which are previously unreported for any commercial OTA. Using the simulation results two first order voltage controlled all pass filters with phase tuning capability are proposed.
Abstract: Rainfall records of rainfall station including the
rainfall potential per hour and rainfall mass of five heavy storms are
explored, respectively from 2001 to 2010. The rationalization formula
is to investigate the capability of flood peak duration of flood
detention pond in different rainfall conditions. The stable flood
detention model is also proposed by using system dynamic control
theory to get the message of flood detention pond in this research.
When rainfall frequency of one hour rainfall duration is more than
100-year frequency which exceeds the flood detention standard of
20-year frequency for the flood detention pond, the flood peak
duration of flood detention pond is 1.7 hours at most even though the
flood detention pond with maximum drainage potential about 15.0
m3/s of pumping system is constructed. If the rainfall peak current is
more than maximum drainage potential, the flood peak duration of
flood detention pond is about 1.9 hours at most. The flood detention
pond is the key factor of stable drainage control and flood prevention.
The critical factors of flood disaster is not only rainfall mass, but also
rainfall frequency of heavy storm in different rainfall duration and
flood detention frequency of flood detention system.
Abstract: This paper reports a new and accurate method for load-flow solution of radial distribution networks with minimum data preparation. The node and branch numbering need not to be sequential like other available methods. The proposed method does not need sending-node, receiving-node and branch numbers if these are sequential. The proposed method uses the simple equation to compute the voltage magnitude and has the capability to handle composite load modelling. The proposed method uses the set of nodes of feeder, lateral(s) and sub lateral(s). The effectiveness of the proposed method is compared with other methods using two examples. The detailed load-flow results for different kind of load-modellings are also presented.
Abstract: This research attempts to explore gaps in Information
Systems (IS) and innovation literatures by developing a model of
Information Technology (IT) capability in enabling innovation. The
research was conducted by using semi-structured interview with six
innovators in business consulting, financial, healthcare and academic
organizations. The interview results suggest four elements of ITenabled
innovation capability which are information (ability to
capture ideas and knowledge), connectivity (ability to bridge
geographical boundary and mobilize human resources),
communication (ability to attain and engage relationships between
human resources) and transformation (ability to change the functions
and process integrations) in defining IT-enabled innovation platform.
The results also suggests innovators- roles and IT capability.
Abstract: Motion detection is very important in image
processing. One way of detecting motion is using optical flow.
Optical flow cannot be computed locally, since only one independent
measurement is available from the image sequence at a point, while
the flow velocity has two components. A second constraint is needed.
The method used for finding the optical flow in this project is
assuming that the apparent velocity of the brightness pattern varies
smoothly almost everywhere in the image. This technique is later
used in developing software for motion detection which has the
capability to carry out four types of motion detection. The motion
detection software presented in this project also can highlight motion
region, count motion level as well as counting object numbers. Many
objects such as vehicles and human from video streams can be
recognized by applying optical flow technique.
Abstract: The aim of this study is to investigate the effect of
perceived social support and stress on the coping capability and level
of depression of foreign and local students in Malaysia. Using
convenience sampling, 200 students from three universities in
Selangor, Malaysia participated in the study. The results of this study
revealed that there was a significant relationship between perceived
social support and coping capability. It is also found that there is a
negative relationship between coping capability and depression.
Further, stress and depression are positively related whereas stress
and coping capability are negatively related. Lastly, there is no
significant difference for the stress level and coping capability
amongst local and foreign students.
Abstract: The manufacture of large-scale precision aerospace
components using CNC requires a highly effective maintenance
strategy to ensure that the required accuracy can be achieved over
many hours of production. This paper reviews a strategy for a
maintenance management system based on Failure Mode Avoidance,
which uses advanced techniques and technologies to underpin a
predictive maintenance strategy. It is shown how condition
monitoring (CM) is important to predict potential failures in high
precision machining facilities and achieve intelligent and integrated
maintenance management. There are two distinct ways in which CM
can be applied. One is to monitor key process parameters and
observe trends which may indicate a gradual deterioration of
accuracy in the product. The other is the use of CM techniques to
monitor high status machine parameters enables trends to be
observed which can be corrected before machine failure and
downtime occurs.
It is concluded that the key to developing a flexible and intelligent
maintenance framework in any precision manufacturing operation is
the ability to evaluate reliably and routinely machine tool condition
using condition monitoring techniques within a framework of Failure
Mode Avoidance.