Abstract: A suitable e-learning system management needs to
carry out a web-information system in order to allow integrated
fruition of data and metadata concerning the activities typical of elearning
environment. The definition of a “web information system"
for e-learning takes advantage of the potentialities of Web
technologies both as for the access to metadata present on the several
platforms, and as for the implementation of courseware which make
up the relative didactic environment. What information systems have
in common is the technological environment on which they are
generally implemented and the use of metadata in order to structure
information at all cognitive and organization levels. In this work we
are going to define a methodology for the implementation of a
specific web information system for an e-learning environment.
Abstract: Does education matter to the quality of our life? The results of extensive studies offer an affirmative answer to this question: high education levels are positively associated with higher income, with more highly qualified professions, with lower risk of unemployment, with better physical health and also, it is said, with more happiness. However, exploring these relationships is far from straightforward. Aside from educational credentials, what properties distinguish functionally literate individuals? How can their personal level of satisfaction be measured? What are the social mechanisms whereby education affects well-being?Using a literacy index and several measures for well-being developed by secondary analysis of the Adult Literacy and Life Skills Survey database, this investigation examined the relationship between literacy skills and subjective wellbeing in several OECD (Organisation for Economic Co-operation and Development) countries. Special attention was been addressed to Italy, and in particular to two regions representing territorial differences in this country: Piedmont and Campania.
Abstract: Global approximation using metamodel for complex
mathematical function or computer model over a large variable
domain is often needed in sensibility analysis, computer simulation,
optimal control, and global design optimization of complex, multiphysics
systems. To overcome the limitations of the existing
response surface (RS), surrogate or metamodel modeling methods for
complex models over large variable domain, a new adaptive and
regressive RS modeling method using quadratic functions and local
area model improvement schemes is introduced. The method applies
an iterative and Latin hypercube sampling based RS update process,
divides the entire domain of design variables into multiple cells,
identifies rougher cells with large modeling error, and further divides
these cells along the roughest dimension direction. A small number
of additional sampling points from the original, expensive model are
added over the small and isolated rough cells to improve the RS
model locally until the model accuracy criteria are satisfied. The
method then combines local RS cells to regenerate the global RS
model with satisfactory accuracy. An effective RS cells sorting
algorithm is also introduced to improve the efficiency of model
evaluation. Benchmark tests are presented and use of the new
metamodeling method to replace complex hybrid electrical vehicle
powertrain performance model in vehicle design optimization and
optimal control are discussed.
Abstract: Thyroid dysfunction is one of the most frequently
reported complications of chronic blood transfusion therapy in patients with beta-thalassemia major (BTM). However, the occurrence of thyroid dysfunction and its possible association with
iron overload in BTM patients is still under debate. Therefore, this
study aimed to investigate the status of thyroid functions and iron overload in adolescent and young adult patients with BTM in Jordan population. Thirty six BTM patients aged 12-28 years and matched controls were included in this study. All patients have been receiving frequent blood transfusion to maintain pretransfusion hemoglobin
concentration above 10 g dl-1 and deferoxamine at a dose of 45 mg kg-1 day-1 (8 h, 5-7 days/week) by subcutaneous infusion. Blood
samples were drawn from patients and controls. The status of thyroid functions and iron overload was evaluated by measurements of serum
free thyroxine (FT4), triiodothyronine (FT3), thyrotropin (TSH) and
serum ferritin level. A number of some hematological and
biochemical parameters were also measured. It was found that hematocrit, serum ferritin, hemoglobin, FT3 and zinc, copper mean values were significantly higher in the patients than in the controls (P< 0.05). On other hand, leukocyte, FT4 and TSH mean values were
similar to that of the controls. In addition, our data also indicated that
all of the above examined parameters were not significantly affected
by the patient-s age and gender. Deferoxamine approach for removing excess iron from our BTM patient did not normalize the
values of serum ferritin, copper and zinc, suggesting poor compliance
with deferoxamine chelation therapy. Thus, we recommend the use
of a combination of deferoxamine and deferiprone to reduce the risk
of excess of iron in our patients. Furthermore, thyroid dysfunction
appears to be a rare complication, because our patients showed
normal mean levels for serum TSH and FT4. However, high mean
levels of serum ferritin, zinc, copper might be seen as potential risk
factors for initiation and development of thyroid dysfunctions and
other diseases. Therefore, further studies must be carried out at
yearly intervals with large sample number, to detect subclinical
thyroid dysfunction cases.
Abstract: We are proposing a simple watermarking method
based on visual cryptography. The method is based on selection of
specific pixels from the original image instead of random selection of
pixels as per Hwang [1] paper. Verification information is generated
which will be used to verify the ownership of the image without the
need to embed the watermark pattern into the original digital data.
Experimental results show the proposed method can recover the
watermark pattern from the marked data even if some changes are
made to the original digital data.
Abstract: Nowadays there is a growing environmental concern
and the business communities have slowly started recognising
environmental protection and sustainable utilization of natural
resources into their marketing strategies. This paper discusses the
various Ecolabeling and Certification Systems developed world
over to regulate and introduce Fair Trade in Ornamental Fish
Industry. Ecolabeling and green certification are considered as part
of these strategies implemented partly out of compulsion from the
National and International Regulatory Bodies and Environmental
Movements. All the major markets of ornamental fishes like
European Union, USA and Japan have started putting restrictions on
the trade to impose ecolabeling as a non tariff barrier like the one
imposed on seafood and aqua cultured products. A review was done
on the available Ecolabeling and Green Certification Schemes
available at local, national and international levels for fisheries
including aquaculture and ornamental fish trade and to examine the
success and constraints faced by these schemes during its
implementation. The primary downside of certification is the
multiplicity of ecolabels and cost incurred by applicants for
certification, costs which may in turn be passed on to consumers.
The studies reveal serious inadequacies in a number of ecolabels
and cast doubt on their overall contribution to effective fisheries
management and sustainability. The paper also discusses the
inititive taken in India to develop guidelines for Green Certification
of Fresh water ornamental fishes.
Abstract: Sudoku is a kind of logic puzzles. Each puzzle consists
of a board, which is a 9×9 cells, divided into nine 3×3 subblocks
and a set of numbers from 1 to 9. The aim of this puzzle is to
fill in every cell of the board with a number from 1 to 9 such
that in every row, every column, and every subblock contains each
number exactly one. Sudoku puzzles belong to combinatorial problem
(NP complete). Sudoku puzzles can be solved by using a variety of
techniques/algorithms such as genetic algorithms, heuristics, integer
programming, and so on. In this paper, we propose a new approach for
solving Sudoku which is by modelling them as block-world problems.
In block-world problems, there are a number of boxes on the table
with a particular order or arrangement. The objective of this problem
is to change this arrangement into the targeted arrangement with the
help of two types of robots. In this paper, we present three models
for Sudoku. We modellized Sudoku as parameterized multi-agent
systems. A parameterized multi-agent system is a multi-agent system
which consists of several uniform/similar agents and the number of
the agents in the system is stated as the parameter of this system. We
use Temporal Logic of Actions (TLA) for formalizing our models.
Abstract: Extreme temperature of several stations in Malaysia is
modelled by fitting the monthly maximum to the Generalized
Extreme Value (GEV) distribution. The Mann-Kendall (MK) test
suggests a non-stationary model. Two models are considered for
stations with trend and the Likelihood Ratio test is used to determine
the best-fitting model. Results show that half of the stations favour a
model which is linear for the location parameters. The return level is
the level of events (maximum temperature) which is expected to be
exceeded once, on average, in a given number of years, is obtained.
Abstract: For many industrial applications plate heat
exchangers are demonstrating a large superiority over the
other types of heat exchangers. The efficiency of such a
device depends on numerous factors the effect of which needs
to be analysed and accurately evaluated.
In this paper we present a theoretical analysis of a cocurrent
plate heat exchanger and the results of its numerical
simulation.
Knowing the hot and the cold fluid streams inlet temperatures,
the respective heat capacities mCp
and the value of the
overall heat transfer coefficient, a 1-D mathematical model
based on the steady flow energy balance for a differential
length of the device is developed resulting in a set of N first
order differential equations with boundary conditions where N
is the number of channels.For specific heat exchanger
geometry and operational parameters, the problem is
numerically solved using the shooting method.
The simulation allows the prediction of the temperature
map in the heat exchanger and hence, the evaluation of its
performances. A parametric analysis is performed to evaluate
the influence of the R-parameter on the e-NTU values. For
practical purposes effectiveness-NTU graphs are elaborated
for specific heat exchanger geometry and different operating
conditions.
Abstract: We study the dynamic response of a wind turbine
structure subjected to theoretical seismic motions, taking into account
the rotational component of ground shaking. Models are generated
for a shallow moderate crustal earthquake in the Madrid Region
(Spain). Synthetic translational and rotational time histories are
computed using the Discrete Wavenumber Method, assuming a point
source and a horizontal layered earth structure. These are used to
analyze the dynamic response of a wind turbine, represented by a
simple finite element model. Von Mises stress values at different
heights of the tower are used to study the dynamical structural
response to a set of synthetic ground motion time histories
Abstract: In this paper, novel statistical sampling based equalization techniques and CNN based detection are proposed to increase the spectral efficiency of multiuser communication systems over fading channels. Multiuser communication combined with selective fading can result in interferences which severely deteriorate the quality of service in wireless data transmission (e.g. CDMA in mobile communication). The paper introduces new equalization methods to combat interferences by minimizing the Bit Error Rate (BER) as a function of the equalizer coefficients. This provides higher performance than the traditional Minimum Mean Square Error equalization. Since the calculation of BER as a function of the equalizer coefficients is of exponential complexity, statistical sampling methods are proposed to approximate the gradient which yields fast equalization and superior performance to the traditional algorithms. Efficient estimation of the gradient is achieved by using stratified sampling and the Li-Silvester bounds. A simple mechanism is derived to identify the dominant samples in real-time, for the sake of efficient estimation. The equalizer weights are adapted recursively by minimizing the estimated BER. The near-optimal performance of the new algorithms is also demonstrated by extensive simulations. The paper has also developed a (Cellular Neural Network) CNN based approach to detection. In this case fast quadratic optimization has been carried out by t, whereas the task of equalizer is to ensure the required template structure (sparseness) for the CNN. The performance of the method has also been analyzed by simulations.
Abstract: Paper deals with the topic of questions as important
components of information behavior in the school. By analyzing the
Corpus Schola2010, the state of contemporary education in terms of
questioning is proven unsatisfactory: 80% of the questions are asked
by teachers; most of teacher-s questions are asked at the beginning of
the first grade, than their number decreases and is settling down on
80±10 questions per lesson. The average number of questions within
one lesson per one pupil is generally less than one whole question.
The highest values are achieved in the first, sixth, eighth and tenth
grade,, i.e. in the transition years in which pupils are moving into
higher levels of education and every following year it declines. We
can state Czech school do not support questioning and question skill
of their pupils, thereby typical Czech schools are neglecting the
development of thinking, reasoning and cooperation of their pupils.
Abstract: In this work, propagation of uncertainty during calibration
process of TRANUS, an integrated land use and transport model
(ILUTM), has been investigated. It has also been examined, through a
sensitivity analysis, which input parameters affect the variation of the
outputs the most. Moreover, a probabilistic verification methodology
of calibration process, which equates the observed and calculated
production, has been proposed. The model chosen as an application is
the model of the city of Grenoble, France. For sensitivity analysis and
uncertainty propagation, Monte Carlo method was employed, and a
statistical hypothesis test was used for verification. The parameters of
the induced demand function in TRANUS, were assumed as uncertain
in the present case. It was found that, if during calibration, TRANUS
converges, then with a high probability the calibration process is
verified. Moreover, a weak correlation was found between the inputs
and the outputs of the calibration process. The total effect of the
inputs on outputs was investigated, and the output variation was found
to be dictated by only a few input parameters.
Abstract: In the domain of machine vision, the
measurement of length is done using cameras where the
accuracy is directly proportional to the resolution of the
camera and inversely to the size of the object. Since most of
the pixels are wasted imaging the entire body as opposed to
just imaging the edges in a conventional system, a double
aperture system is constructed to focus on the edges to
measure at higher resolution. The paper discusses the
complexities and how they are mitigated to realize a practical
machine vision system.
Abstract: In this study, we are interested in the economic lot
scheduling problem (ELSP) that considers manufacturing of the
serviceable products and remanufacturing of the reworked products. In
this paper, we formulate a mathematical model for the ELSP with
reworks using the basic period approach. In order to solve this
problem, we propose a search algorithm to find the cyclic multiplier ki
of each product that can be cyclically produced for every ki basic
periods. This research also uses two heuristics to search for the optimal
production sequence of all lots and the optimal time length of the basic
period so as to minimize the average total cost. This research uses a
numerical example to show the effectiveness of our approach.
Abstract: The groundwater is one of the main sources for
sustainability in the United Arab Emirates (UAE). Intensive
developments in Al-Ain area lead to increase water demand, which
consequently reduced the overall groundwater quantity in major
aquifers. However, in certain residential areas within Al-Ain, it has
been noticed that the groundwater level is rising, for example in
Sha-ab Al Askher area. The reasons for the groundwater rising
phenomenon are yet to be investigated. In this work, twenty four
seismic refraction profiles have been carried out along the study
pilot area; as well as field measurement of the groundwater level in
a number of available water wells in the area. The processed
seismic data indicated the deepest and shallowest groundwater
levels are 15m and 2.3 meters respectively. This result is greatly
consistent with the proper field measurement of the groundwater
level. The minimum detected value may be referred to perched
subsurface water which may be associated to the infiltration from
the surrounding water bodies such as lakes, and elevated farms. The
maximum values indicate the accurate groundwater level within the
study area. The findings of this work may be considered as a
preliminary help to the decision makers.
Abstract: Service trade is an important force of influencing economic development. A review on the related literatures is done firstly. Then through the construction of a Diamond Model, the main factors which influence the competitiveness of Chinese service trade are determined. With three competitiveness indexes served as the reference series respectively, the influencing factors served as the comparable series, three grey incidence models are then built up to conduct an empirical analysis on the main factors influencing the competitiveness of service trade after China entering WTO. The result indicates that urbanization level, open degree of service industry and foreign direct investment have larger impacts on Chinese service trade competitiveness, followed in turn by GDP in service industry and human capital, while commodity trade has the minimum impact. Further discussion provides train of thought for the upgrade of Chinese service trade competitiveness.
Abstract: Machining is an important manufacturing process used to produce a wide variety of metallic parts. Among various machining processes, turning is one of the most important one which is employed to shape cylindrical parts. In turning, the quality of finished product is measured in terms of surface roughness. In turn, surface quality is determined by machining parameters and tool geometry specifications. The main objective of this study is to simultaneously model and optimize machining parameters and tool geometry in order to improve the surface roughness for AISI1045 steel. Several levels of machining parameters and tool geometry specifications are considered as input parameters. The surface roughness is selected as process output measure of performance. A Taguchi approach is employed to gather experimental data. Then, based on signal-to-noise (S/N) ratio, the best sets of cutting parameters and tool geometry specifications have been determined. Using these parameters values, the surface roughness of AISI1045 steel parts may be minimized. Experimental results are provided to illustrate the effectiveness of the proposed approach.
Abstract: The aim of this study was to demonstrate the possible
effect of some variables such as age, gender, blood sugar level, and
duration of diabetes on the serum level of zinc in diabetic individuals
from Murzuk area. Serum zinc (Zn), Fasting blood sugar (FBS),
hemoglobin HbA1c (HbA1c) were evaluated in 46 type I diabetic
subjects (group 1), 48 type II diabetic subjects (group 2) and 43
healthy individuals (control) of both genders aged (30-81) years. Data
showed that both diabetic groups have significantly higher (P0.05) differences in serum Zn levels were observed
between Males and Females. Serum Zn levels were non-significantly
decreased with increasing age. In type II diabetic subjects, serum Zn
levels were non-significantly decreased with increasing duration of
disease whereas those in type I were non-significantly increased.
Abstract: We study the possibility of using geometric operators
in the selection of human resources. We develop three new methods
that use the ordered weighted geometric (OWG) operator in different
indexes used for the selection of human resources. The objective of
these models is to manipulate the neutrality of the old methods so the
decision maker is able to select human resources according to his
particular attitude. In order to develop these models, first a short
revision of the OWG operator is developed. Second, we briefly
explain the general process for the selection of human resources.
Then, we develop the three new indexes. They will use the OWG
operator in the Hamming distance, in the adequacy coefficient and in
the index of maximum and minimum level. Finally, an illustrative
example about the new approach is given.