Abstract: The mechanical properties of blends consisting of
plasticized poly(vinyl butyral) (PVB) and plasticized poly(vinyl
chloride) (PVC) are studied, in order to evaluate the possibility of
using recycled PVB waste derived from windshields. PVC was
plasticized with 38% of diisononyl phthalate (DINP), while PVB was
plasticized with 28% of triethylene glycol, bis(2-ethylhexanoate)
(3GO). The optimal process conditions for the PVB/PVC blend in 1:1
ratio were determined. Entropy was used in order to theoretically
predict the blends miscibility. The PVB content of each blend
composition used was ranging from zero to 100%. Tensile strength
and strain were tested. In addition, a comparison between recycled
and original PVB, used as constituents of the blend, was performed.
Abstract: Renewable and non-renewable resource constraints have been vast studied in theoretical fields of project scheduling problems. However, although cumulative resources are widespread in practical cases, the literature on project scheduling problems subject to these resources is scant. So in order to study this type of resources more, in this paper we use the framework of a resource constrained project scheduling problem (RCPSP) with finish-start precedence relations between activities and subject to the cumulative resources in addition to the renewable resources. We develop a branch and bound algorithm for this problem customizing precedence tree algorithm of RCPSP. We perform extensive experimental analysis on the algorithm to check its effectiveness and performance for solving different instances of the problem in question.
Abstract: In this paper, a neural network tuned fuzzy controller
is proposed for controlling Multi-Input Multi-Output (MIMO)
systems. For the convenience of analysis, the structure of MIMO
fuzzy controller is divided into single input single-output (SISO)
controllers for controlling each degree of freedom. Secondly,
according to the characteristics of the system-s dynamics coupling, an
appropriate coupling fuzzy controller is incorporated to improve the
performance. The simulation analysis on a two-level mass–spring
MIMO vibration system is carried out and results show the
effectiveness of the proposed fuzzy controller. The performance
though improved, the computational time and memory used is
comparatively higher, because it has four fuzzy reasoning blocks and
number may increase in case of other MIMO system. Then a fuzzy
neural network is designed from a set of input-output training data to
reduce the computing burden during implementation. This control
strategy can not only simplify the implementation problem of fuzzy
control, but also reduce computational time and consume less
memory.
Abstract: A stiffened laminated composite panel (1 m length ×
0.5m width) was optimized for minimum weight and deflection under
several constraints using genetic algorithm. Here, a significant study
on the performance of a penalty function with two kinds of static and
dynamic penalty factors was conducted. The results have shown that
linear dynamic penalty factors are more effective than the static ones.
Also, a specially combined linear-exponential function has shown to
perform more effective than the previously mentioned penalty
functions. This was then resulted in the less sensitivity of the GA to
the amount of penalty factor.
Abstract: There is a complex situation on the transport environment in the cities of the world. For the analysis and prevention of environmental problems an accurate calculation hazardous substances concentrations at each point of the investigated area is required. In the turbulent atmosphere of the city the wellknown methods of mathematical statistics for these tasks cannot be applied with a satisfactory level of accuracy. Therefore, to solve this class of problems apparatus of mathematical physics is more appropriate. In such models, because of the difficulty as a rule the influence of uneven land surface on streams of air masses in the turbulent atmosphere of the city are not taken into account. In this paper the influence of the surface roughness, which can be quite large, is mathematically shown. The analysis of this problem under certain conditions identified the possibility of areas appearing in the atmosphere with pressure tending to infinity, i.e. so-called "wall effect".
Abstract: There are many issues that affect modeling and designing real-time databases. One of those issues is maintaining consistency between the actual state of the real-time object of the external environment and its images as reflected by all its replicas distributed over multiple nodes. The need to improve the scalability is another important issue. In this paper, we present a general framework to design a replicated real-time database for small to medium scale systems and maintain all timing constrains. In order to extend the idea for modeling a large scale database, we present a general outline that consider improving the scalability by using an existing static segmentation algorithm applied on the whole database, with the intent to lower the degree of replication, enables segments to have individual degrees of replication with the purpose of avoiding excessive resource usage, which all together contribute in solving the scalability problem for DRTDBS.
Abstract: The full length mitochondrial small subunit ribosomal
(mt-rns) gene has been characterized for Ophiostoma novo-ulmi
subspecies americana. The gene was also characterized for
Ophiostoma ulmi and a group II intron was noted in the mt-rns gene
of O. ulmi. The insertion in the mt-rns gene is at position S952 and it
is a group IIB1 intron that encodes a double motif LAGLIDADG
homing endonuclease from an open reading frame located within a
loop of domain III. Secondary structure models for the mt-rns RNA
of O. novo-ulmi subsp. americana and O. ulmi were generated to
place the intron within the context of the ribosomal RNA. The in vivo
splicing of the O.ul-mS952 group II intron was confirmed with
reverse transcription-PCR. A survey of 182 strains of Dutch Elm
Diseases causing agents showed that the mS952 intron was absent in
what is considered to be the more aggressive species O. novo-ulmi
but present in strains of the less aggressive O. ulmi. This observation
suggests that the O.ul-mS952 intron can be used as a PCR-based
molecular marker to discriminate between O. ulmi and O. novo-ulmi
subsp. americana.
Abstract: Increasing concerns over climate change have limited
the liberal usage of available energy technology options. India faces
a formidable challenge to meet its energy needs and provide adequate
energy of desired quality in various forms to users in sustainable
manner at reasonable costs. In this paper, work carried out with an
objective to study the role of various energy technology options
under different scenarios namely base line scenario, high nuclear
scenario, high renewable scenario, low growth and high growth rate
scenario. The study has been carried out using Model for Energy
Supply Strategy Alternatives and their General Environmental
Impacts (MESSAGE) model which evaluates the alternative energy
supply strategies with user defined constraints on fuel availability,
environmental regulations etc. The projected electricity demand, at
the end of study period i.e. 2035 is 500490 MWYr. The model
predicted the share of the demand by Thermal: 428170 MWYr,
Hydro: 40320 MWYr, Nuclear: 14000 MWYr, Wind: 18000 MWYr
in the base line scenario. Coal remains the dominant fuel for
production of electricity during the study period. However, the
import dependency of coal increased during the study period. In
baseline scenario the cumulative carbon dioxide emissions upto 2035
are about 11,000 million tones of CO2. In the scenario of high nuclear
capacity the carbon dioxide emissions reduced by 10 % when nuclear
energy share increased to 9 % compared to 3 % in baseline scenario.
Similarly aggressive use of renewables reduces 4 % of carbon
dioxide emissions.
Abstract: In order to enhance the knowledge of certain
phytochemical Algerian plants that are widely used in traditional
medicine and to exploit their therapeutic potential in modern
medicine, we have done a specific extraction of terpenes and
alkaloids from the leaves of Euphorbia granulata to evaluate the
antioxidant and antibacterial activity of this extracts. After the
extraction it was found that the terpene extract gave the highest yield
59.72% compared with alkaloids extracts.
The disc diffusion method was used to determine the antibacterial
activity against different bacterial strains: Escherichia coli
(ATCC25922), Pseudomonas aeruginosa (ATCC27853) and
Staphylococcus aureus (ATCC25923). All extracts have shown
inhibition of growth bacteria. The different zones of inhibition have
varied from (7 -10 mm) according to the concentrations of extract
used.
Testing the antiradical activity on DPPH-TLC plates indicated the
presence of substances that have potent anti-free radical. As against,
the BC-TLC revealed that only terpenes extract which was reacted
positively. These results can validate the importance of Euphorbia
granulata in traditional medicine.
Abstract: This study assesses the vulnerability of Bulgarian
agriculture to drought using the WINISAREG model and seasonal
standard precipitation index SPI(2) for the period 1951-2004. This
model was previously validated for maize on soils of different water
holding capacity (TAW) in various locations. Simulations are
performed for Plovdiv, Stara Zagora and Sofia. Results relative to
Plovdiv show that in soils of large TAW (180 mm m-1) net irrigation
requirements (NIRs) range 0-40 mm in wet years and 350-380 mm in
dry years. In soils of small TAW (116 mm m-1), NIRs reach 440 mm
in the very dry year. NIRs in Sofia are about 80 mm smaller. Rainfed
maize is associated with great yield variability (29%
Abstract: The special constraints of sensor networks impose a
number of technical challenges for employing them. In this review,
we study the issues and existing protocols in three areas: coverage
and routing. We present two types of coverage problems: to
determine the minimum number of sensor nodes that need to perform
active sensing in order to monitor a certain area; and to decide the
quality of service that can be provided by a given sensor network.
While most routing protocols in sensor networks are data-centric,
there are other types of routing protocols as well, such as
hierarchical, location-based, and QoS-aware. We describe and
compare several protocols in each group. We present several multipath
routing protocols and single-path with local repair routing
protocols, which are proposed for recovering from sensor node
crashes. We also discuss some transport layer schemes for reliable
data transmission in lossy wireless channels.
Abstract: At any point of time, a power system operating
condition should be stable, meeting various operational criteria and it
should also be secure in the event of any credible contingency. Present
day power systems are being operated closer to their stability limits
due to economic and environmental constraints. Maintaining a stable
and secure operation of a power system is therefore a very important
and challenging issue. Voltage instability has been given much
attention by power system researchers and planners in recent years,
and is being regarded as one of the major sources of power system
insecurity. Voltage instability phenomena are the ones in which the
receiving end voltage decreases well below its normal value and does
not come back even after setting restoring mechanisms such as VAR
compensators, or continues to oscillate for lack of damping against the
disturbances. Reactive power limit of power system is one of the major
causes of voltage instability. This paper investigates the effects of
coordinated series capacitors (SC) with static VAR compensators
(SVC) on steady-state voltage stability of a power system. Also, the
influence of the presence of series capacitor on static VAR
compensator controller parameters and ratings required to stabilize
load voltages at certain values are highlighted.
Abstract: The Connection Admission Control (CAC) problem is formulated in this paper as a discrete time optimal control problem. The control variables account for the acceptance/ rejection of new connections and forced dropping of in-progress connections. These variables are constrained to meet suitable conditions which account for the QoS requirements (Link Availability, Blocking Probability, Dropping Probability). The performance index evaluates the total throughput. At each discrete time, the problem is solved as an integer-valued linear programming one. The proposed procedure was successfully tested against suitably simulated data.
Abstract: The effect of different tempering temperatures and heat treatment times on the corrosion resistance of austenitic stainless steels in oxalic acid was studied in this work using conventional weight loss and electrochemical measurements. Typical 304 and 316 stainless steel samples were tempered at 150oC, 250oC and 350oC after being austenized at 1050oC for 10 minutes. These samples were then immersed in 1.0M oxalic acid and their weight losses were measured at every five days for 30 days. The results show that corrosion of both types of ASS samples increased with an increase in tempering temperature and time and this was due to the precipitation of chromium carbides at the grain boundaries of these metals. Electrochemical results also confirm that the 304 ASS is more susceptible to corrosion than 316 ASS in this medium. This is attributed to the molybdenum in the composition of the latter. The metallographic images of these samples showed non–uniform distribution of precipitated chromium carbides at the grain boundaries of these metals and unevenly distributed carbides and retained austenite phases which cause galvanic effects in the medium.
Abstract: We investigated the effects of modified
preprogrammed training mode Chase Trainer from Balance Trainer
(BT3, HurLab, Tampere, Finland) on athlete who experienced
unilateral Patellofemoral Pain Syndrome (PFPS). Twenty-seven
athletes with mean age= 14.23 ±1.31 years, height = 164.89 ± 7.85
cm, weight = 56.94 ± 9.28 kg were randomly assigned to two groups:
experiment (EG; n = 14) and injured (IG; n = 13). EG performed a
series of Chase Trainer program which required them to shift their
body weight at different directions, speeds and angle of leaning twice
a week for duration of 8 weeks. The static postural control and
perceived pain level measures were taken at baseline, after 6 weeks
and 8 weeks of training. There was no significant difference in any of
tested variables between EG and IG before and after 6-week the
intervention period. However, after 8-week of training, the postural
control (eyes open) and perceived pain level of EG improved
compared to IG (p
Abstract: In this paper a nonlinear model is presented to
demonstrate the relation between production and marketing
departments. By introducing some functions such as pricing cost and
market share loss functions it will be tried to show some aspects of
market modelling which has not been regarded before. The proposed
model will be a constrained signomial geometric programming
model. For model solving, after variables- modifications an iterative
technique based on the concept of geometric mean will be introduced
to solve the resulting non-standard posynomial model which can be
applied to a wide variety of models in non-standard posynomial
geometric programming form. At the end a numerical analysis will
be presented to accredit the validity of the mentioned model.
Abstract: With constraints on data availability and for study of power system stability it is adequate to model the synchronous generator with field circuit and one equivalent damper on q-axis known as the model 1.1. This paper presents a systematic procedure for modelling and simulation of a single-machine infinite-bus power system installed with a thyristor controlled series compensator (TCSC) where the synchronous generator is represented by model 1.1, so that impact of TCSC on power system stability can be more reasonably evaluated. The model of the example power system is developed using MATLAB/SIMULINK which can be can be used for teaching the power system stability phenomena, and also for research works especially to develop generator controllers using advanced technologies. Further, the parameters of the TCSC controller are optimized using genetic algorithm. The non-linear simulation results are presented to validate the effectiveness of the proposed approach.
Abstract: During the last few decades in the academic field, the
debate has increased on the effects of social geography on the
opportunities of socioeconomic integration. On one hand, it has been
discussed how the contents of the urban structure and social
geography affect not only the way people interact, but also their
chances of social and economic integration. On the other hand, it has
also been discussed how the urban structure is also constrained and
transformed by the action of social actors. Without questioning the
powerful influence of structural factors, related to the logic of the
production system, labor markets, education and training, the
research has shown the role played by place of residence in shaping
individual outcomes such as unemployment. In the context of this
debate the importance of territory of residence with respect to the
problem of unemployment has been highlighted.
Although statistics of unemployment have already demonstrated
the unequal incidence of the phenomenon in social groups, the issue
of uneven territorial impact on the phenomenon at intra-urban level
remains relatively unknown.
The purpose of this article is to show and to interpret the spatial
patterns of unemployment in the city of Porto using GIS (Geographic
Information System - GIS) technology. Under this analysis the
overlap of the spatial patterns of unemployment with the spatial
distribution of social housing, allows the discussion of the
relationship that occurs between these patterns and the reasons that
might explain the relative immutability of socioeconomic problems in
some neighborhoods.
Abstract: Based on a global kinetics of direct dimethyl ether (DME) synthesis process from syngas, a steady-state one-dimensional mathematical model for the bubble column slurry reactor (BCSR) has been established. It was built on the assumption of plug flow of gas phase, sedimentation-dispersion model of catalyst grains and isothermal chamber regardless of reaction heats and rates for the design of an industrial scale bubble column slurry reactor. The simulation results indicate that higher pressure and lower temperature were favorable to the increase of CO conversion, DME selectivity, products yield and the height of slurry bed, which has a coincidence with the characteristic of DME synthesis reaction system, and that the height of slurry bed is lessen with the increasing of operation temperature in the range of 220-260℃. CO conversion, the optimal operation conditions in BCSR were proposed.
Abstract: Variations in the growth rate constant of the Listeria
monocytogenes bacterial species were determined at 37°C in
irradiated environments and compared to the situation of a nonirradiated
environment. The bacteria cells, contained in a suspension
made of a nutrient solution of Brain Heart Infusion, were made to
grow at different frequency (2.30e2.60 GHz) and power (0e400
mW) values, in a plug flow reactor positioned in the irradiated
environment. Then the reacting suspension was made to pass into a
cylindrical cuvette where its optical density was read every 2.5
minutes at a wavelength of 600 nm. The obtained experimental data
of optical density vs. time allowed the bacterial growth rate constant
to be derived; this was found to be slightly influenced by microwave
power, but not by microwave frequency; in particular, a minimum
value was found for powers in the 50e150 mW field.