Abstract: In this paper a study on the vibration of thin
cylindrical shells with ring supports and made of functionally graded
materials (FGMs) composed of stainless steel and nickel is presented.
Material properties vary along the thickness direction of the shell
according to volume fraction power law. The cylindrical shells have
ring supports which are arbitrarily placed along the shell and impose
zero lateral deflections. The study is carried out based on third order
shear deformation shell theory (T.S.D.T). The analysis is carried out
using Hamilton-s principle. The governing equations of motion of
FGM cylindrical shells are derived based on shear deformation
theory. Results are presented on the frequency characteristics,
influence of ring support position and the influence of boundary
conditions. The present analysis is validated by comparing results
with those available in the literature.
Abstract: Flow movement in unsaturated soil can be expressed
by a partial differential equation, named Richards equation. The
objective of this study is the finding of an appropriate implicit
numerical solution for head based Richards equation. Some of the
well known finite difference schemes (fully implicit, Crank Nicolson
and Runge-Kutta) have been utilized in this study. In addition, the
effects of different approximations of moisture capacity function,
convergence criteria and time stepping methods were evaluated. Two
different infiltration problems were solved to investigate the
performance of different schemes. These problems include of vertical
water flow in a wet and very dry soils. The numerical solutions of
two problems were compared using four evaluation criteria and the
results of comparisons showed that fully implicit scheme is better
than the other schemes. In addition, utilizing of standard chord slope
method for approximation of moisture capacity function, automatic
time stepping method and difference between two successive
iterations as convergence criterion in the fully implicit scheme can
lead to better and more reliable results for simulation of fluid
movement in different unsaturated soils.
Abstract: The sensitivity of orifice plate metering to disturbed
flow (either asymmetric or swirling) is a subject of great concern to
flow meter users and manufacturers. The distortions caused by pipe
fittings and pipe installations upstream of the orifice plate are major
sources of this type of non-standard flows. These distortions can alter
the accuracy of metering to an unacceptable degree. In this work, a
multi-scale object known as metal foam has been used to generate a
predetermined turbulent flow upstream of the orifice plate. The
experimental results showed that the combination of an orifice plate
and metal foam flow conditioner is broadly insensitive to upstream
disturbances. This metal foam demonstrated a good performance in
terms of removing swirl and producing a repeatable flow profile
within a short distance downstream of the device. The results of using
a combination of a metal foam flow conditioner and orifice plate for
non-standard flow conditions including swirling flow and asymmetric
flow show this package can preserve the accuracy of metering up to
the level required in the standards.
Abstract: Image enhancement is the most important challenging preprocessing for almost all applications of Image Processing. By now, various methods such as Median filter, α-trimmed mean filter, etc. have been suggested. It was proved that the α-trimmed mean filter is the modification of median and mean filters. On the other hand, ε-filters have shown excellent performance in suppressing noise. In spite of their simplicity, they achieve good results. However, conventional ε-filter is based on moving average. In this paper, we suggested a new ε-filter which utilizes α-trimmed mean. We argue that this new method gives better outcomes compared to previous ones and the experimental results confirmed this claim.
Abstract: The development of entrepreneurial competences of
farmers has been pointed out as a necessary condition for the
modernization of land in facing the phenomenon of globalization.
However, the educational processes involved in such a development
have been studied little, especially in emerging economies. This
research aims to enlighten some of the critical issues behind the early
stages of the transformation of farmers into entrepreneurs, through in
depth interviews with farmers, entrepreneurial promoters and public
officials participating in a public pilot project in Mexico. Although
major impacts were expected only in the long run, important positive
changes in the mind set of farmers and other participants were found
in early stages of the intervention. Apparently, the farmers started a
process of becoming more conscious about the importance of
preserving the aquiferous resources, as well as more market and
entrepreneurial oriented.
Abstract: The condition of lightning surge causes the traveling waves and the temporary increase in voltage in the transmission line system. Lightning is the most harmful for destroying the transmission line and setting devices so it is necessary to study and analyze the temporary increase in voltage for designing and setting the surge arrester. This analysis describes the figure of the lightning wave in transmission line with 115 kV voltage level in Thailand by using ATP/EMTP program to create the model of the transmission line and lightning surge. Because of the limit of this program, it must be calculated for the geometry of the transmission line and surge parameter and calculation in the manual book for the closest value of the parameter. On the other hand, for the effects on surge protector when the lightning comes, the surge arrester model must be right and standardized as metropolitan electrical authority's standard. The candidate compared the real information to the result from calculation, also. The results of the analysis show that the temporary increase in voltage value will be rise to 326.59 kV at the line which is done by lightning when the surge arrester is not set in the system. On the other hand, the temporary increase in voltage value will be 182.83 kV at the line which is done by lightning when the surge arrester is set in the system and the period of the traveling wave is reduced, also. The distance for setting the surge arrester must be as near to the transformer as possible. Moreover, it is necessary to know the right distance for setting the surge arrester and the size of the surge arrester for preventing the temporary increase in voltage, effectively.
Abstract: An envelope echo signal measurement is proposed in
this paper using echo signal observation from the 200 kHz echo
sounder receiver. The envelope signal without any object is compared
with the envelope signal of the sphere. Two diameter size steel ball
(3.1 cm & 2.2 cm) and two diameter size air filled stainless steel ball
(4.8 cm & 7.4 cm) used in this experiment. The target was positioned
about 0.5 m and 1.0 meter from the transducer face using nylon rope.
From the echo observation in time domain, it is obviously shown that
echo signal structure is different between the size, distance and type
of metal sphere. The amplitude envelope voltage for the bigger
sphere is higher compare to the small sphere and it confirm that the
bigger sphere have higher target strength compare to the small
sphere. Although the structure signal without any object are different
compare to the signal from the sphere, the reflected signal from the
tank floor increase linearly with the sphere size. We considered this
event happened because of the object position approximately to the
tank floor.
Abstract: Amongst the consistently fluctuating conditions
prevailing today, changeability represents a strategic key factor for a
manufacturing company to achieve success on the international
markets. In order to cope with turbulences and the increasing level of
incalculability, not only the flexible design of production systems but
in particular the employee as enabler of change provide the focus
here. It is important to enable employees from manufacturing
companies to participate actively in change events and in change
decisions. To this end, the learning factory has been created, which is
intended to serve the development of change-promoting competences
and the sensitization of employees for the necessity of changes.
Abstract: This paper applies an anthropological approach to illuminate the dynamic cultural geography of Kazakhstani Korean ethnicity focusing on its turning point, the historic “Seoul Olympic Games in 1988." The Korean ethnic group was easily considered as a harmonious and homogeneous community by outsiders, but there existed deep-seated conflicts and hostilities within the ethnic group. The majority-s oppositional dichotomy of superiority and inferiority toward the minority was continuously reorganized and reinforced by difference in experience, memory and sentiment. However, such a chronic exclusive boundary was collapsed following the patriotism ignited by the Olympics held in their mother country. This paper explores the fluidity of subject by formation of the boundary in which constructed cultural differences are continuously essentialized and reproduced, and by dissolution of cultural barrier in certain contexts.
Abstract: The paper deals with the perspectives and possibilities
of "smart solutions" to critical infrastructure protection. It means that
common computer aided technologies are used from the perspective
of new, better protection of selected infrastructure objects. The paper
is focused on the co-product of the Czech Defence Research Project -
ADAPTIV. This project is carrying out by the University of Defence,
Faculty of Economics and Management at the Department of Civil
Protection. The project creates system and technology for adaptive
cybernetic camouflage of armed forces objects, armaments, vehicles
and troops and of mobilization infrastructure. These adaptive
camouflage system and technology will be useful for army tactic
activities protection and for decoys generation also. The fourth
chapter of the paper concerns the possibilities of using the introduced
technology to the protection of selected civil (economically
important), critical infrastructure objects. The aim of this section
is to introduce the scientific capabilities and potential of the
University of Defence research results and solutions for the practice.
Abstract: Face recognition is a technique to automatically
identify or verify individuals. It receives great attention in
identification, authentication, security and many more applications.
Diverse methods had been proposed for this purpose and also a lot of
comparative studies were performed. However, researchers could not
reach unified conclusion. In this paper, we are reporting an extensive
quantitative accuracy analysis of four most widely used face
recognition algorithms: Principal Component Analysis (PCA),
Independent Component Analysis (ICA), Linear Discriminant
Analysis (LDA) and Support Vector Machine (SVM) using AT&T,
Sheffield and Bangladeshi people face databases under diverse
situations such as illumination, alignment and pose variations.
Abstract: Does open ended creative technology give positive impact in learning design? Although there are many researchers had examined on the impact of technology on design education but there are very few conclusive researches done on the impact of open ended used of software to learning design. This paper sought to investigate a group of student-s experience on relatively wider range of software application within the context of design project. A typography design project was used to create a learning environment with the aim of inculcate design skills into the learners and increase their creative problem-solving and critical thinking skills. The methods used in this study were questionnaire survey and personal observation which will be focus on the individual and group response during the completion of the task.
Abstract: Metallic micro parts are playing an important role in micro-fabrication industry. Recently, we have demonstrated a new deformation mechanism for micro-formability of polycrystalline materials. Different depressed micro-features smaller than the grain size have been successfully fabricated on 6061 aluminum alloy (AA6061) substrates with good fidelity. To further verify this proposed deformation mechanism that grain size is not a limiting factor, we demonstrate here that in addition of depressed features, protruded micro-features on a polycrystalline substrate can similarly be fabricated.
Abstract: Nowadays, under developed countries for progress in
science and technology and decreasing the technologic gap with
developed countries, increasing the capacities and technology
transfer from developed countries. To remain competitive, industry is
continually searching for new methods to evolve their products.
Business model is one of the latest buzzwords in the Internet and
electronic business world. To be successful, organizations must look
into the needs and wants of their customers. This research attempts to
identify a specific feature of the company with a strong competitive
advantage by analyzing the cause of Customer satisfaction. Due to
the rapid development of knowledge and information technology,
business environments have become much more complicated.
Information technology can help a firm aiming to gain a competitive
advantage. This study explores the role and effect of Information
Communication Technology in Business Models and Customer
satisfaction on firms and also relationships between ICTs and
Outsourcing strategic.
Abstract: The unanticipated brittle fracture of connection of the
steel moment resisting frame (SMRF) occurred in 1994 the Northridge
earthquake. Since then, the researches for the vulnerability of
connection of the existing SMRF and for rehabilitation of those
buildings were conducted. This paper suggests performance-based
optimal seismic retrofit technique using connection upgrade. For
optimal design, a multi-objective genetic algorithm(NSGA-II) is used.
One of the two objective functions is to minimize initial cost and
another objective function is to minimize lifetime seismic damages
cost. The optimal algorithm proposed in this paper is performed
satisfying specified performance objective based on FEMA 356. The
nonlinear static analysis is performed for structural seismic
performance evaluation. A numerical example of SAC benchmark
SMRF is provided using the performance-based optimal seismic
retrofit technique proposed in this paper
Abstract: This paper analysed the food security situation among
Nigerian rural farmers. Data collected on 202 rural farmers from
Benue State were analysed using descriptive and inferential statistics.
The study revealed that majority of the respondents (60.83%) had
medium dietary diversity. Furthermore, household daily calorie
requirement for the food secure households was 10,723 and the
household daily calorie consumption was 12,598, with a surplus
index of 0.04. The food security index was 1.16. The Household
daily per capita calorie consumption was 3,221.2. For the food
insecure households, the household daily calorie requirement was
20,213 and the household daily calorie consumption was 17,393. The
shortfall index was 0.14. The food security index was 0.88. The
Household daily per capita calorie consumption was 2,432.8. The
most commonly used coping strategies during food stress included
intercropping (99.2%), reliance on less preferred food (98.1%),
limiting portion size at meal times (85.8%) and crop diversification
(70.8%).
Abstract: In this work a new method for low complexity
image coding is presented, that permits different settings and great
scalability in the generation of the final bit stream. This coding
presents a continuous-tone still image compression system that
groups loss and lossless compression making use of finite arithmetic
reversible transforms. Both transformation in the space of color and
wavelet transformation are reversible. The transformed coefficients
are coded by means of a coding system in depending on a
subdivision into smaller components (CFDS) similar to the bit
importance codification. The subcomponents so obtained are
reordered by means of a highly configure alignment system
depending on the application that makes possible the re-configure of
the elements of the image and obtaining different importance levels
from which the bit stream will be generated. The subcomponents of
each importance level are coded using a variable length entropy
coding system (VBLm) that permits the generation of an embedded
bit stream. This bit stream supposes itself a bit stream that codes a
compressed still image. However, the use of a packing system on the
bit stream after the VBLm allows the realization of a final highly
scalable bit stream from a basic image level and one or several
improvement levels.
Abstract: In this paper we improve the quasilinearization method by barycentric Lagrange interpolation because of its numerical stability and computation speed to achieve a stable semi analytical solution. Then we applied the improved method for solving the Fin problem which is a nonlinear equation that occurs in the heat transferring. In the quasilinearization approach the nonlinear differential equation is treated by approximating the nonlinear terms by a sequence of linear expressions. The modified QLM is iterative but not perturbative and gives stable semi analytical solutions to nonlinear problems without depending on the existence of a smallness parameter. Comparison with some numerical solutions shows that the present solution is applicable.
Abstract: The paper is intended to declare and apply ethics, i. e.
moral principles, rules in marketing environment. Ethical behavior of
selected pharmaceutical companies in the Slovak Republic is the
object of our research. The aim of our research is to determine
perception of ethical behavior of the pharmaceutical industry in
Slovakia by the medicine representatives in comparison with the
assessment of doctors and patients. The experimental sample
included 90 participants who were divided into three groups:
medicine representatives of the pharmaceutical companies (N=30),
doctors (N=30) and patients (N=30). The research method was a
Questionnaire of ethical behavior, created by us, that describes
individual areas included in the Code of ethics of the pharmaceutical
industry in Slovakia. The results showed influence of professional
status on ethical behavior perception, not gender. Higher perception
was indicated at patients rather than doctors and medicine
representatives.
Abstract: PARIS (Personal Archiving and Retrieving Image
System) is an experiment personal photograph library, which includes
more than 80,000 of consumer photographs accumulated within a
duration of approximately five years, metadata based on our proposed
MPEG-7 annotation architecture, Dozen Dimensional Digital Content
(DDDC), and a relational database structure. The DDDC architecture
is specially designed for facilitating the managing, browsing and
retrieving of personal digital photograph collections. In annotating
process, we also utilize a proposed Spatial and Temporal Ontology
(STO) designed based on the general characteristic of personal
photograph collections. This paper explains PRAIS system.