Abstract: Every organization is continually subject to new damages and threats which can be resulted from their operations or their goal accomplishment. Methods of providing the security of space and applied tools have been widely changed with increasing application and development of information technology (IT). From this viewpoint, information security management systems were evolved to construct and prevent reiterating the experienced methods. In general, the correct response in information security management systems requires correct decision making, which in turn requires the comprehensive effort of managers and everyone involved in each plan or decision making. Obviously, all aspects of work or decision are not defined in all decision making conditions; therefore, the possible or certain risks should be considered when making decisions. This is the subject of risk management and it can influence the decisions. Investigation of different approaches in the field of risk management demonstrates their progress from quantitative to qualitative methods with a process approach.
Abstract: The purpose of this article is to analyze economic and
political tendencies of development of integration processes with
different developing level and speed on the Eurasian space, by considering two organizations at the region – Eurasian Economic
Community and Shanghai Cooperation Organization, by considering the interests of participations in organizations of Russia and China as
a global powers and Kazakhstan as a leader among the Central Asian
countries. This article investigates what certain goals Eurasian
countries (especially Russia, Kazakhstan and China) are waiting from integration within the SCO and the EurAsEC, linking the process
with the theories of regional integration. After European debt crisis it is more topically to research the integration within the specific
region's conditions.
Abstract: Results of Chilean wine classification based on the
information provided by an electronic nose are reported in this paper.
The classification scheme consists of two parts; in the first stage,
Principal Component Analysis is used as feature extraction method to
reduce the dimensionality of the original information. Then, Radial
Basis Functions Neural Networks is used as pattern recognition
technique to perform the classification. The objective of this study is
to classify different Cabernet Sauvignon, Merlot and Carménère wine
samples from different years, valleys and vineyards of Chile.
Abstract: The aim of this study was to investigate the
environmental conservation behavior of the Applied Health Science
students of Suranaree University of Technology, a green and clean
university. The sample group was 184 Applied Health Science
students (medical, nursing, and public health). A questionnaire was
used to collect information.
The result of the study found that the students had more negative
than positive behaviors towards energy, water, and forest
conservation. This result can be used as basic information for
designing long-term behavior modification activities or research
projects on environmental conservation. Thus Applied Health
Science students will be encouraged to be conscious and also be a
good example of environmental conservation behavior.
Abstract: This study reports the implementation of Good
Manufacturing Practice (GMP) in a polycarbonate film processing
plant. The implementation of GMP took place with the creation of a
multidisciplinary team. It was carried out in four steps: conduct gap
assessment, create gap closure plan, close gaps, and follow up the
GMP implementation. The basis for the gap assessment is the
guideline for GMP for plastic materials and articles intended for Food
Contact Material (FCM), which was edited by Plastic Europe. The
effective results of the GMP implementation in this study showed
100% completion of gap assessment. The key success factors for
implementing GMP in production process are the commitment,
intention and support of top management.
Abstract: It well recognized that one feature that makes a
successful company is its ability to successfully align its business goals with its information communication technologies platform.
Enterprise Resource Planning (ERP) systems contribute to achieve better performance by integrating various business functions and
providing support for information flows. However, the technological
systems complexity is known to prevent the business users to exploit in an efficient way the Enterprise Resource Planning Systems (ERP).
This paper aims to investigate the role of training in improving the
usage of ERP systems. To this end, we have designed an instrument
survey to employees of a Norwegian multinational global provider of
technology solutions. Based on the analysis of collected data, we have delineated a training model that could be high relevance for
both researchers and practitioners as a step towards a better
understanding of ERP system implementation.
Abstract: Despite the recent surge of research in control of
worm propagation, currently, there is no effective defense system
against such cyber attacks. We first design a distributed detection
architecture called Detection via Distributed Blackholes (DDBH).
Our novel detection mechanism could be implemented via virtual
honeypots or honeynets. Simulation results show that a worm can be
detected with virtual honeypots on only 3% of the nodes. Moreover,
the worm is detected when less than 1.5% of the nodes are infected.
We then develop two control strategies: (1) optimal dynamic trafficblocking,
for which we determine the condition that guarantees
minimum number of removed nodes when the worm is contained and
(2) predictive dynamic traffic-blocking–a realistic deployment of
the optimal strategy on scale-free graphs. The predictive dynamic
traffic-blocking, coupled with the DDBH, ensures that more than
40% of the network is unaffected by the propagation at the time
when the worm is contained.
Abstract: Concrete strength evaluated from compression tests
on cores is affected by several factors causing differences from the
in-situ strength at the location from which the core specimen was
extracted. Among the factors, there is the damage possibly occurring
during the drilling phase that generally leads to underestimate the
actual in-situ strength. In order to quantify this effect, in this study
two wide datasets have been examined, including: (i) about 500 core
specimens extracted from Reinforced Concrete existing structures,
and (ii) about 600 cube specimens taken during the construction of
new structures in the framework of routine acceptance control. The
two experimental datasets have been compared in terms of
compression strength and specific weight values, accounting for the
main factors affecting a concrete property, that is type and amount of
cement, aggregates' grading, type and maximum size of aggregates,
water/cement ratio, placing and curing modality, concrete age. The
results show that the magnitude of the strength reduction due to
drilling damage is strongly affected by the actual properties of
concrete, being inversely proportional to its strength. Therefore, the
application of a single value of the correction coefficient, as generally
suggested in the technical literature and in structural codes, appears
inappropriate. A set of values of the drilling damage coefficient is
suggested as a function of the strength obtained from compressive
tests on cores.
Abstract: The highly nonlinear characteristics of drying
processes have prompted researchers to seek new nonlinear control
solutions. However, the relation between the implementation
complexity, on-line processing complexity, reliability control
structure and controller-s performance is not well established. The
present paper proposes high performance nonlinear fuzzy controllers
for a real-time operation of a drying machine, being developed under
a consistent match between those issues. A PCI-6025E data
acquisition device from National Instruments® was used, and the
control system was fully designed with MATLAB® / SIMULINK
language. Drying parameters, namely relative humidity and
temperature, were controlled through MIMOs Hybrid Bang-bang+PI
(BPI) and Four-dimensional Fuzzy Logic (FLC) real-time-based
controllers to perform drying tests on biological materials. The
performance of the drying strategies was compared through several
criteria, which are reported without controllers- retuning. Controllers-
performance analysis has showed much better performance of FLC
than BPI controller. The absolute errors were lower than 8,85 % for
Fuzzy Logic Controller, about three times lower than the
experimental results with BPI control.
Abstract: In this study, a synthetic pathway was created by
assembling genes from Clostridium butyricum and Escherichia coli
in different combinations. Among the genes were dhaB1 and dhaB2
from C. butyricum VPI1718 coding for glycerol dehydratase (GDHt)
and its activator (GDHtAc), respectively, involved in the conversion
of glycerol to 3-hydroxypropionaldehyde (3-HPA). The yqhD gene
from E.coli BL21 was also included which codes for an NADPHdependent
1,3-propanediol oxidoreductase isoenzyme (PDORI)
reducing 3-HPA to 1,3-propanediol (1,3-PD). Molecular modeling
analysis indicated that the conformation of fusion protein of YQHD
and DHAB1 was favorable for direct molecular channeling of the
intermediate 3-HPA. According to the simulation results, the yqhD
and dhaB1 gene were assembled in the upstream of dhaB2 to express
a fusion protein, yielding the recombinant strain E. coliBL21
(DE3)//pET22b+::yqhD-dhaB1_dhaB2 (strain BP41Y3). Strain
BP41Y3 gave 10-fold higher 1,3-PD concentration than E. coliBL21
(DE3)//pET22b+::yqhD-dhaB1_dhaB2 (strain BP31Y2) expressing
the recombinant enzymes simultaneously but in a non-fusion mode.
This is the first report using a gene fusion approach to enhance the
biological conversion of glycerol to the value added compound 1,3-
PD.
Abstract: Voltage flicker problems have long existed in several
of the distribution areas served by the Taiwan Power Company. In
the past, those research results indicating that the estimated ΔV10
value based on the conventional method is significantly smaller than
the survey value. This paper is used to study the relationship between
the voltage flicker problems and harmonic power variation for the
power system with electric arc furnaces. This investigation discussed
thought the effect of harmonic power fluctuation with flicker
estimate value. The method of field measurement, statistics and
simulation is used. The survey results demonstrate that 10 ΔV
estimate must account for the effect of harmonic power variation.
Abstract: Wood pyrolysis for Casuarina glauca, Casuarina cunninghamiana, Eucalyptus camaldulensis, Eucalyptus microtheca was made at 450°C with 2.5°C/min. in a flowing N2-atmosphere. The Eucalyptus genus wood gave higher values of specific gravity, ash , total extractives, lignin, N2-liquid trap distillate (NLTD) and water trap distillate (WSP) than those for Casuarina genus. The GHC of NLTD was higher for Casuarina genus than that for Eucalyptus genus with the highest value for Casuarina cunninghamiana. Guiacol, 4-ethyl-2-methoxyphenol and syringol were observed in the NLTD of all the four wood species reflecting their parent hardwood lignin origin. Eucalyptus camaldulensis wood had the highest lignin content (28.89%) and was pyrolyzed to the highest values of phenolics (73.01%), guaiacol (11.2%) and syringol (32.28%) contents in methylene chloride fraction (MCF) of NLTD. Accordingly, recoveries of syringol and guaiacol may become economically attractive from Eucalyptus camaldulensis.
Abstract: Nanophotocatalysts such as titanium (TiO2), zinc (ZnO), and iron (Fe2O3) oxides can be used in organic pollutants oxidation, and in many other applications. But among the challenges for technological application (scale-up) of the nanotechnology scientific developments two aspects are still little explored: research on environmental risk of the nanomaterials preparation methods, and the study of nanomaterials properties and/or performance variability. The environmental analysis was performed for six different methods of ZnO nanoparticles synthesis, and showed that it is possible to identify the more environmentally compatible process even at laboratory scale research. The obtained ZnO nanoparticles were tested as photocatalysts, and increased the degradation rate of the Rhodamine B dye up to 30 times.
Abstract: “Web of Trust" is one of the recognized goals for
Web 2.0. It aims to make it possible for the people to take
responsibility for what they publish on the web, including
organizations, businesses and individual users. These objectives,
among others, drive most of the technologies and protocols recently
standardized by the governing bodies. One of the great advantages of
Web infrastructure is decentralization of publication. The primary
motivation behind Web 2.0 is to assist the people to add contents for
Collective Intelligence (CI) while providing mechanisms to link
content with people for evaluations and accountability of
information. Such structure of contents will interconnect users and
contents so that users can use contents to find participants and vice
versa. This paper proposes conceptual information storage and
linking model, based on decentralized information structure, that
links contents and people together. The model uses FOAF, Atom,
RDF and RDFS and can be used as a blueprint to develop Web 2.0
applications for any e-domain. However, primary target for this
paper is online trust evaluation domain. The proposed model targets
to assist the individuals to establish “Web of Trust" in online trust
domain.
Abstract: Participation in sporting activities can lead to injury.
Sport injuries have been widely studied in many sports including the
more extreme categories of aquatic board sports. Kitesurfing is a
relatively new water surface action sport, and has not yet been
widely studied in terms of injuries and stress on the body. The aim of
this study was to get information about which injuries that are most
common among kitesurfing participants, where they occur, and their
causes. Injuries were studied using an international open web
questionnaire (n=206).
The results showed that many respondents reported injuries, in
total 251 injuries to knee (24%), ankle (17%), trunk (16%) and
shoulders (10%), often sustained while doing jumps and tricks
(40%). Among the reported injuries were joint injuries (n=101),
muscle/tendon damages (n=47), wounds and cuts (n=36) and bone
fractures (n=28). Also environmental factors and equipment can
influence the risk of injury, or the extent of injury in a hazardous
situation. Conclusively, the information from this retrospective study
supports earlier studies in terms of prevalence and site of injuries.
Suggestively, this information should be used for to build a
foundation of knowledge about the sport for development of
applications for physical training and product development.
Abstract: The performance and complexity of QoS routing depends on the complex interaction between a large set of parameters. This paper investigated the scaling properties of source-directed link-state routing in large core networks. The simulation results show that the routing algorithm, network topology, and link cost function each have a significant impact on the probability of successfully routing new connections. The experiments confirm and extend the findings of other studies, and also lend new insight designing efficient quality-of-service routing policies in large networks.
Abstract: Electrocardiogram (ECG) segmentation is necessary to help reduce the time consuming task of manually annotating ECG's. Several algorithms have been developed to segment the ECG automatically. We first review several of such methods, and then present a new single lead segmentation method based on Adaptive piecewise constant approximation (APCA) and Piecewise derivative dynamic time warping (PDDTW). The results are tested on the QT database. We compared our results to Laguna's two lead method. Our proposed approach has a comparable mean error, but yields a slightly higher standard deviation than Laguna's method.
Abstract: This paper examines the relationships between and
among the various drivers of climate change that have both climatic
and ecological consequences for vegetation and land cover change in
arctic areas, particularly in arctic Alaska. It discusses the various
processes that have created spatial and climatic structures that have
facilitated observable vegetation and land cover changes in the
Arctic. Also, it indicates that the drivers of both climatic and
ecological changes in the Arctic are multi-faceted and operate in a
system with both positive and negative feedbacks that largely results
in further increases or decreases of the initial drivers of climatic and
vegetation change mainly at the local and regional scales. It
demonstrates that the impact of arctic warming on land cover change
and the Arctic ecosystems is not unidirectional and one dimensional
in nature but it represents a multi-directional and multi-dimensional
forces operating in a feedback system.
Abstract: The use of hard and brittle material has become
increasingly more extensive in recent years. Therefore processing of
these materials for the parts fabrication has become a challenging
problem. However, it is time-consuming to machine the hard brittle
materials with the traditional metal-cutting technique that uses
abrasive wheels. In addition, the tool would suffer excessive wear as
well. However, if ultrasonic energy is applied to the machining
process and coupled with the use of hard abrasive grits, hard and
brittle materials can be effectively machined. Ultrasonic machining
process is mostly used for the brittle materials. The present research
work has developed models using finite element approach to predict
the mechanical stresses sand strains produced in the tool during
ultrasonic machining process. Also the flow behavior of abrasive
slurry coming out of the nozzle has been studied for simulation using
ANSYS CFX module. The different abrasives of different grit sizes
have been used for the experimentation work.
Abstract: Analysis for the propagation of elastic waves in
arbitrary anisotropic plates is investigated, commencing with a
formal analysis of waves in a layered plate of an arbitrary anisotropic
media, the dispersion relations of elastic waves are obtained by
invoking continuity at the interface and boundary of conditions on
the surfaces of layered plate. The obtained solutions can be used for
material systems of higher symmetry such as monoclinic,
orthotropic, transversely isotropic, cubic, and isotropic as it is
contained implicitly in the analysis. The cases of free layered plate
and layered half space are considered separately. Some special cases
have also been deduced and discussed. Finally numerical solution of
the frequency equations for an aluminum epoxy is carried out, and
the dispersion curves for the few lower modes are presented. The
results obtained theoretically have been verified numerically and
illustrated graphically.