Abstract: In this paper an extensive verification of the extraction
method (published earlier) that consistently accounts for self-heating
and Early effect to accurately extract both base and thermal resistance
of bipolar junction transistors is presented. The method verification is
demonstrated on advanced RF SiGe HBTs were the extracted results
for the thermal resistance are compared with those from another
published method that ignores the effect of Early effect on internal
base-emitter voltage and the extracted results of the base resistance
are compared with those determined from noise measurements. A
self-consistency of our method in the extracted base resistance and
thermal resistance using compact model simulation results is also
carried out in order to study the level of accuracy of the method.
Abstract: There are many expand of Wi-Fi zones provided
mobile careers and usage of wireless access point at home as increase
of usage of wireless internet caused by the use of smart phone. This
paper shows wireless local area network status, security threats of
WLAN and functionality of major wireless access point in Korea. We
propose security countermeasures concerned with life cycle of access
point from manufacturing to installation, using and finally disposal.
There needed to releasing with configured secure at access point.
Because, it is most cost effective resolution than stage of installation or
other life cycle of access point.
Abstract: In this study, we illustrated the performance and
microbial community of single- and two-phase systems anaerobically
co-digesting cassava pulp and pig manure. The results showed that
the volatile solid reduction and biogas productivity of two-phase
CSTR were 66 ± 4% and 2000 ± 210 ml l-1 d-1, while those of singlephase
CSTR were 59 ± 1% and 1670 ± 60 ml l-1 d-1, respectively. Codigestion
in two-phase CSTR gave higher 12% solid degradation and
25% methane production than single-phase CSTR. Phylogenetic
analysis of 16S rDNA clone library revealed that the Bacteroidetes
were the most abundant group, followed by the Clostridia in singlephase
CSTR. In hydrolysis/acidification reactor of two-phase system,
the bacteria within the phylum Firmicutes, especially Clostridium,
Eubacteriaceae and Lactobacillus were the dominant phylogenetic
groups. Among the Archaea, Methanosaeta sp. was the exclusive
predominant in both digesters while the relative abundance of
Methanosaeta sp. and Methanospirillum hungatei differed between
the two systems.
Abstract: In this paper, we consider an iteration process for
approximating common fixed points of two asymptotically quasinonexpansive
mappings and we prove some strong and weak convergence
theorems for such mappings in uniformly convex Banach
spaces.
Abstract: The paper describes design of an ontology in the
financial domain for mutual funds. The design of this ontology
consists of four steps, namely, specification, knowledge acquisition,
implementation and semantic query. Specification includes a
description of the taxonomy and different types mutual funds and
their scope. Knowledge acquisition involves the information
extraction from heterogeneous resources. Implementation describes
the conceptualization and encoding of this data. Finally, semantic
query permits complex queries to integrated data, mapping of these
database entities to ontological concepts.
Abstract: Greenhouse gases (GHG) emissions impose major
threat to global warming potential (GWP). Unfortunately
manufacturing sector is one of the major sources that contribute
towards the rapid increase in greenhouse gases (GHG) emissions. In
manufacturing sector electric power consumption is the major driver
that influences CO2 emission. Titanium alloys are widely utilized in
aerospace, automotive and petrochemical sectors because of their
high strength to weight ratio and corrosion resistance. Titanium
alloys are termed as difficult to cut materials because of their poor
machinability rating. The present study analyzes energy consumption
during cutting with reference to material removal rate (MRR).
Surface roughness was also measured in order to optimize energy
consumption.
Abstract: New biostimulator from wheat seeds which by its
chemical composition relates to fusicoccin is presented in this article.
New biostimulator could be used as powerful hormonal substance
that has ability to increase productivity and salt tolerance of
agricultural plants. Also on the basis of biostimulator we have
developed vegetative method for fast reproduction of perennial plants
as desert plant - Tamarix gracilis.
Abstract: The mitigation of crop loss due to damaging freezes
requires accurate air temperature prediction models. Previous work
established that the Ward-style artificial neural network (ANN) is a
suitable tool for developing such models. The current research
focused on developing ANN models with reduced average prediction
error by increasing the number of distinct observations used in
training, adding additional input terms that describe the date of an
observation, increasing the duration of prior weather data included in
each observation, and reexamining the number of hidden nodes used
in the network. Models were created to predict air temperature at
hourly intervals from one to 12 hours ahead. Each ANN model,
consisting of a network architecture and set of associated parameters,
was evaluated by instantiating and training 30 networks and
calculating the mean absolute error (MAE) of the resulting networks
for some set of input patterns. The inclusion of seasonal input terms,
up to 24 hours of prior weather information, and a larger number of
processing nodes were some of the improvements that reduced
average prediction error compared to previous research across all
horizons. For example, the four-hour MAE of 1.40°C was 0.20°C, or
12.5%, less than the previous model. Prediction MAEs eight and 12
hours ahead improved by 0.17°C and 0.16°C, respectively,
improvements of 7.4% and 5.9% over the existing model at these
horizons. Networks instantiating the same model but with different
initial random weights often led to different prediction errors. These
results strongly suggest that ANN model developers should consider
instantiating and training multiple networks with different initial
weights to establish preferred model parameters.
Abstract: More and more natural disasters are happening every
year: floods, earthquakes, volcanic eruptions, etc. In order to reduce
the risk of possible damages, governments all around the world are
investing into development of Early Warning Systems (EWS) for
environmental applications. The most important task of the EWS is
identification of the onset of critical situations affecting environment
and population, early enough to inform the authorities and general
public. This paper describes an approach for monitoring of flood
protections systems based on machine learning methods. An
Artificial Intelligence (AI) component has been developed for
detection of abnormal dike behaviour. The AI module has been
integrated into an EWS platform of the UrbanFlood project (EU
Seventh Framework Programme) and validated on real-time
measurements from the sensors installed in a dike.
Abstract: In this study, two new classes of generalized homeomorphisms are introduced and shown that one of these classes has a group structure. Moreover, some properties of these two homeomorphisms are obtained.
Abstract: This study discusses the stumbling blocks stifling the
adoption of GPS technology in the public sector of Pakistan. This
study has been carried out in order to describe the value of GPS
technology and its adoption at various public sector organisations in
Pakistan. Sample size for the research conducted was 200; personnel
working in public sector having age above 29 years were surveyed.
Data collected for this research has been quantitatively analysed with
the help of SPSS. Regression analysis, correlation and cross
tabulation were the techniques used to determine the strength of
relationship between key variables. Findings of this research indicate
that main hurdles in GPS adoption in the public sector of Pakistan are
lack of awareness about GPS among masses in general and the
stakeholders in particular, lack of initiative on part of government in
promoting new technologies, unavailability of GPS infrastructure in
Pakistan and prohibitions on map availability because of security
reasons.
Abstract: This study offers a new simple method for assessing
an axial part-through crack in a pipe wall. The method utilizes simple
approximate expressions for determining the fracture parameters K,
J, and employs these parameters to determine critical dimensions of a
crack on the basis of equality between the J-integral and the J-based
fracture toughness of the pipe steel. The crack tip constraint is taken
into account by the so-called plastic constraint factor C, by which the
uniaxial yield stress in the J-integral equation is multiplied. The
results of the prediction of the fracture condition are verified by burst
tests on test pipes.
Abstract: Architecture education was based on apprenticeship
models and its nature has not changed much during long period but
the Source of changes was its evaluation process and system. It is
undeniable that art and architecture education is completely based on
transmitting knowledge from instructor to students. In contrast to
other majors this transmitting is by iteration and practice and studio
masters try to control the design process and improving skills in the
form of supervision and criticizing. Also the evaluation will end by
giving marks to students- achievements. Therefore the importance of
the evaluation and assessment role is obvious and it is not irrelevant
to say that if we want to know about the architecture education
system, we must first study its assessment procedures. The evolution
of these changes in western countries has literate and documented
well. However it seems that this procedure has unregarded in
Malaysia and there is a severe lack of research and documentation in
this area. Malaysia as an under developing and multicultural country
which is involved different races and cultures is a proper origin for
scrutinizing and understanding the evaluation systems and
acceptability amount of current implemented models to keep the
evaluation and assessment procedure abreast with needs of different
generations, cultures and even genders. This paper attempts to
answer the questions of how evaluation and assessments are
performed and how students perceive this evaluation system in the
context Malaysia. The main advantage of this work is that it
contributes in international debate on evaluation model.
Abstract: An algorithm for learning an overcomplete dictionary
using a Cauchy mixture model for sparse decomposition of an underdetermined
mixing system is introduced. The mixture density
function is derived from a ratio sample of the observed mixture
signals where 1) there are at least two but not necessarily more
mixture signals observed, 2) the source signals are statistically
independent and 3) the sources are sparse. The basis vectors of the
dictionary are learned via the optimization of the location parameters
of the Cauchy mixture components, which is shown to be more
accurate and robust than the conventional data mining methods
usually employed for this task. Using a well known sparse
decomposition algorithm, we extract three speech signals from two
mixtures based on the estimated dictionary. Further tests with
additive Gaussian noise are used to demonstrate the proposed
algorithm-s robustness to outliers.
Abstract: The implementation of single-electron tunneling
(SET) simulators based on the master-equation (ME) formalism
requires the efficient and accurate identification of an exhaustive list
of active states and related tunnel events. Dynamic simulations also
require the control of the emerging states and guarantee the safe
elimination of decaying states. This paper describes algorithms for
use in the stationary and dynamic control of the lists of active states
and events. The paper presents results obtained using these
algorithms with different SET structures.
Abstract: The after–sales activities are nowadays acknowledged
as a relevant source of revenue, profit and competitive advantage in
most manufacturing industries. Top and middle management,
therefore, should focus on the definition of a structured business
performance measurement system for the after-sales business. The
paper aims at filling this gap, and presents an integrated methodology
for the after-sales network performance measurement, and provides
an empirical application to automotive case companies and their
official service network. This is the first study that presents an
integrated multivariate approach for total assessment and
improvement of after-sale services.
Abstract: The concept of housing affordability is a contested
issue, but a pressing and widespread problem for many countries.
Simple ratio measures based on housing expenditure and income are
habitually used to defined and assess housing affordability. However,
conceptualising and measuring affordability in this manner focuses
only on financial attributes and fails to deal with wider issues such as
housing quality, location and access to services and facilities.
The research is based on the notion that the housing affordability
problem encompasses more than the financial costs of housing and a
households ability to meet such costs and must address larger issues
such as social and environmental sustainability and the welfare of
households. Therefore, the need arises for a broad and more
encompassing set of attributes by which housing affordability can be
assessed. This paper presents a system of criteria by which the
affordability of different housing locations could be assessed in a
comprehensive and sustainable manner. Moreover, the paper explores
the way in which such criteria could be measured.
Abstract: Hair is a non homogenous complex material which
can be associated with a polymer. It is made up 95% of Keratin.
Hair has a great social significance for human beings. In the High
Middle Ages, for example, long hairs have been reserved for kings
and nobles.
Most common interest in hair is focused on hair growth, hair types
and hair care, but hair is also an important biomaterial which can
vary depending on ethnic origin or on age, hair colour for example
can be a sign of ethnic ancestry or age (dark hair for Asiatic, blond
hair for Caucasian and white hair for old people in general).
In this context, different approaches have been conducted to
determine the differences in mechanical properties and characterize
the fracture topography at the surface of hair depending on its type
and its age.
A tensile testing machine was especially designed to achieve
tensile tests on hair. This device is composed of a microdisplacement
system and a force sensor whose peak load is limited to
3N. The curves and the values extracted from each experiment, allow
us to compare the evolution of the mechanical properties from one
hair to another.
Observations with a Scanning Electron Microscope (SEM) and
with an interferometer were made on different hairs. Thus, it is
possible to access the cuticle state and the fracture topography for
each category.
Abstract: Ant colony optimization (ACO) and its variants are
applied extensively to resolve various continuous optimization
problems. As per the various diversification and intensification
schemes of ACO for continuous function optimization, researchers
generally consider components of multidimensional state space to
generate the new search point(s). However, diversifying to a new
search space by updating only components of the multidimensional
vector may not ensure that the new point is at a significant distance
from the current solution. If a minimum distance is not ensured
during diversification, then there is always a possibility that the
search will end up with reaching only local optimum. Therefore, to
overcome such situations, a Mahalanobis distance-based
diversification with Nelder-Mead simplex-based search scheme for
each ant is proposed for the ACO strategy. A comparative
computational run results, based on nine nonlinear standard test
problems, confirms that the performance of ACO is improved
significantly with the integration of the proposed schemes in the
ACO.
Abstract: Usually, the solid-fuel flow of an iron ore sinter plant
consists of different types of the solid-fuels, which differ from each
other. Information about the composition of the solid-fuel flow
usually comes every 8-24 hours. It can be clearly seen that this
information cannot be used to control the sintering process in real
time. Due to this, we propose an expert system which uses indirect
measurements from the process in order to obtain the composition of
the solid-fuel flow by solving an optimization task. Then this
information can be used to control the sintering process. The
proposed technique can be successfully used to improve sinter
quality and reduce the amount of solid-fuel used by the process.