Abstract: This paper is a continuation of our interest in the influence of temperature on specific retention volumes and the resulting infinite dilution activity coefficients. This has a direct effect in the design of absorption and stripping columns for the abatement of volatile organic compounds. The interaction of 13 volatile organic compounds (VOCs) with polydimethylsiloxane (PDMS) at varying temperatures was studied by gas liquid chromatography (GLC). Infinite dilution activity coefficients and specific retention volumes obtained in this study were found to be in agreement with those obtained from static headspace and group contribution methods by the authors as well as literature values for similar systems. Temperature variation also allows for transport calculations for different seasons. The results of this work confirm that PDMS is well suited for the scrubbing of VOCs from waste gas streams. Plots of specific retention volumes against temperature gave linear van-t Hoff plots.
Abstract: An economic operation scheduling problem of a
hydro-thermal power generation system has been properly solved by
the proposed multipath adaptive tabu search algorithm (MATS). Four
reservoirs with their own hydro plants and another one thermal plant
are integrated to be a studied system used to formulate the objective
function under complicated constraints, eg water managements,
power balance and thermal generator limits. MATS with four subsearch
units (ATSs) and two stages of discarding mechanism (DM),
has been setting and trying to solve the problem through 25 trials
under function evaluation criterion. It is shown that MATS can
provide superior results with respect to single ATS and other
previous methods, genetic algorithms (GA) and differential evolution
(DE).
Abstract: An aqueous methanol sensor for use in direct
methanol fuel cells (DMFCs) applications is demonstrated; the
methanol sensor is built using dispersed single-walled carbon
nanotubes (SWCNTs) with Nafion117 solution to detect the methanol
concentration in water. The study is aimed at the potential use of the
carbon nanotubes array as a methanol sensor for direct methanol fuel
cells (DMFCs). The concentration of methanol in the fuel circulation
loop of a DMFC system is an important operating parameter, because
it determines the electrical performance and efficiency of the fuel cell
system. The sensor is also operative even at ambient temperatures
and responds quickly to changes in the concentration levels of the
methanol. Such a sensor can be easily incorporated into the methanol
fuel solution flow loop in the DMFC system.
Abstract: Faced with social and health system capacity
constraints and rising and changing demand for welfare services,
governments and welfare providers are increasingly relying on
innovation to help support and enhance services. However, the
evidence reported by several studies indicates that the realization of
that potential is not an easy task. Innovations can be deemed
inherently complex to implement and operate, because many of them
involve a combination of technological and organizational renewal
within an environment featuring a diversity of stakeholders. Many
public welfare service innovations are markedly systemic in their
nature, which means that they emerge from, and must address, the
complex interplay between political, administrative, technological,
institutional and legal issues. This paper suggests that stakeholders
dealing with systemic innovation in welfare services must deal with
ambiguous and incomplete information in circumstances of
uncertainty. Employing a literature review methodology and case
study, this paper identifies, categorizes and discusses different
aspects of the uncertainty of systemic innovation in public welfare
services, and argues that uncertainty can be classified into eight
categories: technological uncertainty, market uncertainty,
regulatory/institutional uncertainty, social/political uncertainty,
acceptance/legitimacy uncertainty, managerial uncertainty, timing
uncertainty and consequence uncertainty.
Abstract: In this paper we have proposed a methodology to
develop an amperometric biosensor for the analysis of glucose
concentration using a simple microcontroller based data acquisition
system. The work involves the development of Detachable
Membrane Unit (enzyme based biomembrane) with immobilized
glucose oxidase on the membrane and interfacing the same to the
signal conditioning system. The current generated by the biosensor
for different glucose concentrations was signal conditioned, then
acquired and computed by a simple AT89C51-microcontroller. The
optimum operating parameters for the better performance were found
and reported. The detailed performance evaluation of the biosensor
has been carried out. The proposed microcontroller based biosensor
system has the sensitivity of 0.04V/g/dl, with a resolution of
50mg/dl. It has exhibited very good inter day stability observed up to
30 days. Comparing to the reference method such as HPLC, the
accuracy of the proposed biosensor system is well within ± 1.5%.
The system can be used for real time analysis of glucose
concentration in the field such as, food and fermentation and clinical
(In-Vitro) applications.
Abstract: Simultaneous transient conduction and radiation heat
transfer with heat generation is investigated. Analysis is carried out
for both steady and unsteady situations. two-dimensional gray
cylindrical enclosure with an absorbing, emitting, and isotropically
scattering medium is considered. Enclosure boundaries are assumed
at specified temperatures. The heat generation rate is considered
uniform and constant throughout the medium. The lattice Boltzmann
method (LBM) was used to solve the energy equation of a transient
conduction-radiation heat transfer problem. The control volume finite
element method (CVFEM) was used to compute the radiative
information. To study the compatibility of the LBM for the energy
equation and the CVFEM for the radiative transfer equation, transient
conduction and radiation heat transfer problems in 2-D cylindrical
geometries were considered. In order to establish the suitability of the
LBM, the energy equation of the present problem was also solved
using the the finite difference method (FDM) of the computational
fluid dynamics. The CVFEM used in the radiative heat transfer was
employed to compute the radiative information required for the
solution of the energy equation using the LBM or the FDM (of the
CFD). To study the compatibility and suitability of the LBM for the
solution of energy equation and the CVFEM for the radiative
information, results were analyzed for the effects of various
parameters such as the boundary emissivity. The results of the LBMCVFEM
combination were found to be in excellent agreement with
the FDM-CVFEM combination. The number of iterations and the
steady state temperature in both of the combinations were found
comparable. Results are found for situations with and without heat
generation. Heat generation is found to have significant bearing on
temperature distribution.
Abstract: This work presents the results of a study carried out to
determine the sliding wear behavior and its effect on the process
parameters of components manufactured by direct metal laser
sintering (DMLS). A standard procedure and specimen had been used
in the present study to find the wear behavior. Using Taguchi-s
experimental technique, an orthogonal array of modified L8 had been
developed. Sliding wear testing using pin-on-disk machine was
carried out and analysis of variance (ANOVA) technique was used to
investigate the effect of process parameters and to identify the main
process parameter that influences the properties of wear behavior on
the DMLS components. It has been found that part orientation, one
of the selected process parameter had more influence on wear as
compared to other selected process parameters.
Abstract: The purpose of this research is to disentangle and
validate the underlying factorial-structure of Ecotourism Experiential
Value (EEV) measurement scale and subsequently investigate its
psychometric properties. The analysis was based on a sample of 225
eco-tourists, collected at the vicinity of Taman Negara National Park
(TNNP) via interviewer-administered questionnaire. Exploratory
factor analysis (EFA) was performed to determine the factorial
structure of EEV. Subsequently, to confirm and validate the factorial
structure and assess the psychometric properties of EEV,
confirmatory factor analysis (CFA) was executed. In addition, to
establish the nomological validity of EEV a structural model was
developed to examine the effect of EEV on Total Eco-tourist
Experience Quality (TEEQ). It is unveiled that EEV is a secondorder
six-factorial structure construct and it scale has adequately met
the psychometric criteria, thus could permit interpretation of results
confidently. The findings have important implications for future
research directions and management of ecotourism destination.
Abstract: Mobile Ad hoc network consists of a set of mobile
nodes. It is a dynamic network which does not have fixed topology.
This network does not have any infrastructure or central
administration, hence it is called infrastructure-less network. The
change in topology makes the route from source to destination as
dynamic fixed and changes with respect to time. The nature of
network requires the algorithm to perform route discovery, maintain
route and detect failure along the path between two nodes [1]. This
paper presents the enhancements of ARA [2] to improve the
performance of routing algorithm. ARA [2] finds route between
nodes in mobile ad-hoc network. The algorithm is on-demand source
initiated routing algorithm. This is based on the principles of swarm
intelligence. The algorithm is adaptive, scalable and favors load
balancing. The improvements suggested in this paper are handling of
loss ants and resource reservation.
Abstract: A new technique to quantify the differential mode
delay (DMD) in multimode fiber (MMF) is been presented. The
technique measures DMD based on angular launch and
measurements of the difference in modal delay using variable
apertures at the fiber face. The result of the angular spatial filtering
revealed less excitation of higher order modes when the laser beam is
filtered at higher angles. This result would indicate that DMD
profiles would experience a data pattern dependency.
Abstract: Obsessive-Compulsive Disorder (OCD) is a common
and disabling condition. Therapist-delivered treatments that use
exposure and response prevention have been found to be very
effective in treating OCD, although they are costly and associated
with high rates of attrition. Effective treatments that can be made
widely available without the need for therapist contact are urgently
needed. This case study represents the first published investigation of
a self-administered cognitive treatment for OCD in a 50-year old
female with a 20 year history of OCD. The treatment evaluation
occurred over 27 weeks, including 12 weeks of self-administration of
the Danger Ideation Reduction Therapy (DIRT) program. Decreases
of between 23% to 33% on measures from pre-treatment to follow-up
were observed. Bearing in mind the methodological limitations
associated with a case study, we conclude that the results reported
here are encouraging and indicate that further research effort
evaluating the effectiveness of self-administered DIRT is warranted.
Abstract: The purpose of this paper is to describe the process of
setting up a learning community within an elementary school in
Ontario, Canada. The description is provided through reflection and
examination of field notes taken during the yearlong training and
implementation process. Specifically the impact of teachers- capacity
on the creation of a learning community was of interest. This paper is
intended to inform and add to the debate around the tensions that
exist in implementing a bottom-up professional development model
like the learning community in a top-down organizational structure.
My reflections of the process illustrate that implementation of the
learning community professional development model may be
difficult and yet transformative in the professional lives of the
teachers, students, and administration involved in the change process.
I conclude by suggesting the need for a new model of professional
development that requires a transformative shift in power dynamics
and a shift in the view of what constitutes effective professional
learning.
Abstract: In this paper, a method for decision making in fuzzy environment is presented.A new subjective and objective integrated approach is introduced that used to assign weight attributes in fuzzy multiple attribute decision making (FMADM) problems and alternatives and fmally ranked by proposed method.
Abstract: In this paper, study on carbonation process of several types of advanced plasters on lime basis is presented. The movement of carbonation head was measured by colorimetric method using phenolphtalein. The rate of carbonation was accessed also by gravimetric method. Samples of studied materials were placed into the climatic chamber for simulation of environment with high concentration of CO2. The particular samples were on all lateral sides and on the bottom side provided by epoxy resin in order to arrange 1-D transport of CO2 into the studied samples. The carbonation rates of particular materials pointed to the time dependence of diffusion process of CO2 for all the studied plasters. From the quantitative point of view, the carbonation of advanced modified plasters was much faster than for the reference lime plaster, what is beneficial for the practical application of the tested newly developed materials.
Abstract: Heuristics-based search methodologies normally
work on searching a problem space of possible solutions toward
finding a “satisfactory" solution based on “hints" estimated from the
problem-specific knowledge. Research communities use different
types of methodologies. Unfortunately, most of the times, these hints
are immature and can lead toward hindering these methodologies by
a premature convergence. This is due to a decrease of diversity in
search space that leads to a total implosion and ultimately fitness
stagnation of the population. In this paper, a novel Decision Maturity
framework (DMF) is introduced as a solution to this problem. The
framework simply improves the decision on the direction of the
search by materializing hints enough before using them. Ideas from
this framework are injected into the particle swarm optimization
methodology. Results were obtained under both static and dynamic
environment. The results show that decision maturity prevents
premature converges to a high degree.
Abstract: Due to short product life cycles, increasing variety of
products and short cycles of leap innovations manufacturing
companies have to increase the flexibility of factory structures.
Flexibility of factory structures is based on defined factory planning
processes in which product, process and resource data of various
partial domains have to be considered. Thus factory planning
processes can be characterized as iterative, interdisciplinary and
participative processes [1]. To support interdisciplinary and
participative character of planning processes, a federative factory
data management (FFDM) as a holistic solution will be described.
FFDM is already implemented in form of a prototype. The interim
results of the development of FFDM will be shown in this paper. The
principles are the extracting of product, process and resource data
from documents of various partial domains providing as web services
on a server. The described data can be requested by the factory
planner by using a FFDM-browser.
Abstract: Pepper spray use has gained momentum since 1992
and although the active ingredient is readily available, it is considered
a weapon with restricted use in many regions, including The
Bahamas. In light of controversy in the literature regarding the
severity of presenting respiration complaints among individuals postacute
exposure of pepper spray inhalation, this descriptive case series
study was conducted to assess the respiratory status of persons
evaluated during a mass casualty in The Bahamas. Parameters noted
were patients- demographics and respiration severity determined via
clinical examination findings, disposition and follow-up review of the
20 persons. Their most common complaint was difficulty breathing
post exposure. Two required admission and stayed for
Abstract: The operating control parameters of injection
flushing type of electrical discharge machining process on stainless
steel 304 workpiece using copper tools are being optimized
according to its individual machining characteristic i.e. Electrode
Wear Ratio (EWR). Higher EWR would give bad dimensional
precision for the EDM machined workpiece because of high
electrode wear. Hence, the quality characteristic for EWR is set to
lower-the-better to achieve the optimum dimensional precision for
the machined workpiece. Taguchi method has been used for the
construction, layout and analysis of the experiment for EWR
machining characteristic. The use of Taguchi method in the
experiment saves a lot of time and cost of preparing and machining
the experiment samples. Therefore, an L18 Orthogonal array
which was the fundamental component in the statistical design of
experiments has been used to plan the experiments and Analysis of
Variance (ANOVA) is used to determine the optimum machining
parameters for this machining characteristic. The control
parameters selected for this optimization experiments are polarity,
pulse on duration, discharge current, discharge voltage, machining
depth, machining diameter and dielectric liquid pressure. The
result had shown that negative polarity machining parameter
setting will decreases EWR.
Abstract: Via a large scale cross-sectional study among Japanese white color workers, the authors aimed to elucidate: (1) the distributions of Sense of Coherence (SOC), which reflect stress coping abilities, (2) the distributions of Life experience; (3) and the association between SOC and Life experience. Anonymous self-administered questionnaires were sent to 15,891 in 2001 and 21,922 in 2011 employees at educational and research institutions in Tsukuba Research Park City. A total of 5,868 (36.9%) and 9,528 (43.5%) respectively workers completed and returned the questionnaire; 5,715 and 9,515 respectively workers without missing data were analyzed. SOC scale scores differed by gender, age, and other demographic features in both study years. Among the life experiences, workers who have got over parenting or management position were higher SOC scale scores adjusted by gender and age. The life experiences that workers have got over could develop their stronger SOC in their life course.
Abstract: The lubricating properties of commercially available
mucins originating from different animal organs, namely bovine
submaxillary mucin (BSM) and porcine gastric mucin (PGM), have
been characterized at polymeric surfaces for biomedical applications.
Atomic force microscopy (AFM) and pin-on-disk tribometry have
been employed for tribological studies at nanoscale and macroscale
contacts, respectively. Polystyrene (PS) was employed to represent
‘rigid’ contacts, whereas poly(dimethylsiloxane) (PDMS) was
employed to represent ‘soft contacts’. To understand the lubricating
properties of mucins in correlation with the coverage on surfaces,
adsorption properties of mucins onto the polymeric substrates have
been characterized by means of optical waveguide light-mode
spectroscopy (OWLS). Both mucins showed facile adsorption onto
both polymeric substrates, but the lubricity was highly dependent
upon the pH change between 2 and 7.