Abstract: A new power regulator controller with multiple-access
PID compensator is proposed, which can achieve a minimum memory
requirement for fully table look-up. The proposed regulator controller
employs hysteresis comparators, an error process unit (EPU) for
voltage regulation, a multiple-access PID compensator and a lowpower-
consumption digital PWM (DPWM). Based on the multipleaccess
mechanism, the proposed controller can alleviate the penalty of
large amount of memory employed for fully table look-up based PID
compensator in the applications of power regulation. The proposed
controller has been validated with simulation results.
Abstract: Processes of plant breeding, testing and licensing of new varieties, patent protection in seed production, relations in trade and protection of copyright are dependent on identification, differentiation and characterization of plant genotypes. Therefore, we focused our research on utilization of wheat storage proteins as genetic markers suitable not only for differentiation of individual genotypes, but also for identification and characterization of their considerable properties. We analyzed a collection of 102 genotypes of bread wheat (Triticum aestivum L.), 41 genotypes of spelt wheat (Triticum spelta L.), and 35 genotypes of durum wheat (Triticum durum Desf.), in this study. Our results show, that genotypes of bread wheat and durum wheat were homogenous and single line, but spelt wheat genotypes were heterogenous. We observed variability of HMW-GS composition according to environmental factors and level of breeding and predict technological quality on the basis of Glu-score calculation.
Abstract: Batteries and fuel cells contain a great potential to back up severe photovoltaic power fluctuations under inclement weather conditions. In this paper comparison between batteries and fuel cells is carried out in detail only for their PV power backup options, so their common attributes and different attributes is discussed. Then, the common and different attributes are compared; accordingly, the fuel cell is selected as the backup of Photovoltaic system. Finally, environmental evaluation of the selected hybrid plant was made in terms of plant-s land requirement and lifetime CO2 emissions, and then compared with that of the conventional fossilfuel power generating forms.
Abstract: This paper presents an improved image segmentation
model with edge preserving regularization based on the
piecewise-smooth Mumford-Shah functional. A level set formulation
is considered for the Mumford-Shah functional minimization in
segmentation, and the corresponding partial difference equations are
solved by the backward Euler discretization. Aiming at encouraging
edge preserving regularization, a new edge indicator function is
introduced at level set frame. In which all the grid points which is used
to locate the level set curve are considered to avoid blurring the edges
and a nonlinear smooth constraint function as regularization term is
applied to smooth the image in the isophote direction instead of the
gradient direction. In implementation, some strategies such as a new
scheme for extension of u+ and u- computation of the grid points and
speedup of the convergence are studied to improve the efficacy of the
algorithm. The resulting algorithm has been implemented and
compared with the previous methods, and has been proved efficiently
by several cases.
Abstract: In this work we evaluate the possibility of predicting
the emotional state of a person based on the EEG. We investigate
the problem of classifying valence from EEG signals during
the presentation of affective pictures, utilizing the "frontal EEG
asymmetry" phenomenon. To distinguish positive and negative
emotions, we applied the Common Spatial Patterns algorithm.
In contrast to our expectations, the affective pictures did not
reliably elicit changes in frontal asymmetry. The classifying task
thereby becomes very hard as reflected by the poor classifier
performance. We suspect that the masking of the source of the
brain activity related to emotions, coming mostly from deeper
structures in the brain, and the insufficient emotional engagement
are among main reasons why it is difficult to predict the emotional
state of a person.
Abstract: Because of the reservoir effect, dynamic analysis of concrete dams is more involved than other common structures. This problem is mostly sourced by the differences between reservoir water, dam body and foundation material behaviors. To account for the reservoir effect in dynamic analysis of concrete gravity dams, two methods are generally employed. Eulerian method in reservoir modeling gives rise to a set of coupled equations, whereas in Lagrangian method, the same equations for dam and foundation structure are used. The Purpose of this paper is to evaluate and study possible advantages and disadvantages of both methods. Specifically, application of the above methods in the analysis of dam-foundationreservoir systems is leveraged to calculate the hydrodynamic pressure on dam faces. Within the frame work of dam- foundationreservoir systems, dam displacement under earthquake for various dimensions and characteristics are also studied. The results of both Lagrangian and Eulerian methods in effects of loading frequency, boundary condition and foundation elasticity modulus are quantitatively evaluated and compared. Our analyses show that each method has individual advantages and disadvantages. As such, in any particular case, one of the two methods may prove more suitable as presented in the results section of this study.
Abstract: The amount of urban artificial heat which affects the
urban temperature rise in urban meteorology was investigated in order
to clarify the relationships between urbanization and urban
meteorology in this study.
The results of calculation to identify how urban temperate was
increased through the establishment of a model for measuring the
amount of urban artificial heat and theoretical testing revealed that the
amount of urban artificial heat increased urban temperature by plus or
minus 0.23 ˚ C in 2007 compared with 1996, statistical methods
(correlation and regression analysis) to clarify the relationships
between urbanization and urban weather were as follows.
New design techniques and urban growth management are
necessary from urban growth management point of view suggested
from this research at city design phase to decrease urban temperature
rise and urban torrential rain which can produce urban disaster in terms
of urban meteorology by urbanization.
Abstract: The Minimal Residual (MR) is modified for adaptive
filtering application. Three forms of MR based algorithm are
presented: i) the low complexity SPCG, ii) MREDSI, and iii)
MREDSII. The low complexity is a reduced complexity version of a
previously proposed SPCG algorithm. Approximations introduced
reduce the algorithm to an LMS type algorithm, but, maintain the
superior convergence of the SPCG algorithm. Both MREDSI and
MREDSII are MR based methods with Euclidean direction of search.
The choice of Euclidean directions is shown via simulation to give
better misadjustment compared to their gradient search counterparts.
Abstract: Modular fixtures (MFs) are very important tools in
manufacturing processes in terms of reduction the cost and the
production time. This paper introduces an automated approach for
assembling MFs elements by employing SolidWorks as a powerful
3D CAD software. Visual Basic (VB) programming language was
applied integrating with SolidWorks API (Application programming
interface) functions. This integration allowed creating plug-in file and
generating new menus in the SolidWorks environment. The menus
allow the user to select, insert, and assemble MFs elements.
Abstract: The objective of this research is to study the people’s level of participation in activities of the community, their satisfaction towards the community, the attachment they have to the community, factors that influence the attachment, as well as the characteristics of the relationships of military families’ of the Royal Guards community of Dusit District. The method used was non-probability sampling by quota sampling according to people’s age. The determined age group was 18 years or older.
One set of a sample group was done per family. The questionnaires were conducted by 287 people. Snowball sampling was also used by interviewing people of the community, starting from the Royal Guards Community’s leader, then by 20 of the community’s well-respected persons. The data was analyzed by using descriptive statistics, such as arithmetic mean and standard deviation, as well as by inferential statistics, such as Independent - Samples T test (T-test), One-Way ANOVA (F-test), Chi-Square. Descriptive analysis according to the structure of the interview content was also used. The results of the research is that the participation of the population in the Royal Guards Community in various activities is at a medium level, with the average participation level during Mother’s and Father’s Days. The people’s general level of satisfaction towards the premises of the Royal Guards Community is at the highest level.
The people were most satisfied with the transportation within the community and in contacting with people from outside the premises. The access to the community is convenient and there are various entrances. The attachment of the people to the Royal Guards Community in general and by each category is at a high level. The feeling that the community is their home rated the highest average. Factors that influence the attachment of the people of the Royal Guards Community are age, status, profession, income, length of stay in the community, membership of social groups, having neighbors they feel close and familiar with, and as well as the benefits they receive from the community. In addition, it was found that people that participate in activities have a high level of positive relationship towards the attachment of the people to the Royal Guards Community. The satisfaction of the community has a very high level of positive relationship with the attachment of the people to the Royal Guards Community.
The characteristics of the attachment of military families’ is that they live in big houses that everyone has to protect and care for, starting from the leader of the family as well as all members. Therefore, they all love the community they live in. The characteristics that show the participation of activities within the community and the high level of satisfaction towards the premises of the community will enable the people to be more attached to the community. The people feel that everyone is close neighbors within the community, as if they are one big family.
Abstract: The contribution deals with analysis of identity style
at adolescents (N=463) at the age from 16 to 19 (the average age is
17,7 years). We used the Identity Style Inventory by Berzonsky,
distinguishing three basic, measured identity styles: informational,
normative, diffuse-avoidant identity style and also commitment. The
informational identity style influencing on personal adaptability,
coping strategies, quality of life and the normative identity style, it
means the style in which an individual takes on models of authorities
at self-defining were found to have the highest representation in the
studied group of adolescents by higher scores at girls in comparison
with boys. The normative identity style positively correlates with the
informational identity style. The diffuse-avoidant identity style was
found to be positively associated with maladaptive decisional
strategies, neuroticism and depressive reactions. There is the style,
in which the individual shifts aside defining his personality. In our
research sample the lowest score represents it and negatively
correlates with commitment, it means with coping strategies, thrust in
oneself and the surrounding world. The age of adolescents did not
significantly differentiate representation of identity style. We were
finding the model, in which informational and normative identity
style had positive relationship and the informational and diffuseavoidant
style had negative relationship, which were determinated
with commitment. In the same time the commitment is influenced
with other outside factors.
Abstract: In this paper, we aim to investigate a new stability analysis for discrete-time switched linear systems based on the comparison, the overvaluing principle, the application of Borne-Gentina criterion and the Kotelyanski conditions. This stability conditions issued from vector norms correspond to a vector Lyapunov function. In fact, the switched system to be controlled will be represented in the Companion form. A comparison system relative to a regular vector norm is used in order to get the simple arrow form of the state matrix that yields to a suitable use of Borne-Gentina criterion for the establishment of sufficient conditions for global asymptotic stability. This proposed approach could be a constructive solution to the state and static output feedback stabilization problems.
Abstract: CIM is the standard formalism for modeling management
information developed by the Distributed Management Task
Force (DMTF) in the context of its WBEM proposal, designed to
provide a conceptual view of the managed environment. In this
paper, we propose the inclusion of formal knowledge representation
techniques, based on Description Logics (DLs) and the Web Ontology
Language (OWL), in CIM-based conceptual modeling, and then we
examine the benefits of such a decision. The proposal is specified as a
CIM metamodel level mapping to a highly expressive subset of DLs
capable of capturing all the semantics of the models. The paper shows
how the proposed mapping can be used for automatic reasoning
about the management information models, as a design aid, by means
of new-generation CASE tools, thanks to the use of state-of-the-art
automatic reasoning systems that support the proposed logic and use
algorithms that are sound and complete with respect to the semantics.
Such a CASE tool framework has been developed by the authors and
its architecture is also introduced. The proposed formalization is not
only useful at design time, but also at run time through the use of
rational autonomous agents, in response to a need recently recognized
by the DMTF.
Abstract: Square pipes (pipes with square cross sections) are
being used for various industrial objectives, such as machine
structure components and housing/building elements. The utilization
of them is extending rapidly and widely. Hence, the out-put of those
pipes is increasing and new application fields are continually
developing.
Due to various demands in recent time, the products have to
satisfy difficult specifications with high accuracy in dimensions. The
reshaping process design of pipes with square cross sections;
however, is performed by trial and error and based on expert-s
experience.
In this paper, a computer-aided simulation is developed based on
the 2-D elastic-plastic method with consideration of the shear
deformation to analyze the reshaping process. Effect of various
parameters such as diameter of the circular pipe and mechanical
properties of metal on product dimension and quality can be
evaluated by using this simulation. Moreover, design of reshaping
process include determination of shrinkage of cross section,
necessary number of stands, radius of rolls and height of pipe at each
stand, are investigated. Further, it is shown that there are good
agreements between the results of the design method and the
experimental results.
Abstract: Infrastructure investments are important in developing
countries, it will not only help to foster the economic growth of a
nation, but it will also act as a platform in which new forms of
partnership and collaboration can be developed mainly in East Asian
countries. Since the last two decades, many infrastructure projects
had been completed through build-operate-transfer (BOT) type of
procurement. The developments of BOT have attracted participation
of local and foreign private sector investor to secure funding and to
deliver projects on time, within the budget and to the required
specifications. Private sectors are preferred by the government in
East Asia to participate in BOT projects due to lack of public
funding. The finding has resulted that the private sector or promoter
of the BOT projects is exposed to multiple risks which have been
discussed in this paper. Effective risk management methods and
good managerial skills are required in ensuring the success of the
project. The review indicated that mitigation measures should be
employed by the promoter throughout the concession period and
support from the host government is also required in ensuring the
success of the BOT project.
Abstract: Pabdeh shaly formation (Paleocene-Oligomiocene)
has been expanded in Fars, Khozestan and Lorestan. The lower
lithostratigraphic limit of this formation in Shiraz area is
distinguished from Gurpi formation by purple shale. Its upper limit is
gradational and conformable with Asmari formation. In order to
study sequence stratigraphy and microfacies of Pabdeh formation in
Shiraz area, one stratigraphic section have been chosen (Zanjiran
section). Petrographic studies resulted in the identification of 9
pelagic and calciturbidite microfacies. The calciturbidite microfacies
have been formed when the sea level was high, the rate of carbonate
deposition was high and it slumped into the deep marine. Sequence
stratigraphy studies show that Pabdeh formation in the studied zone
consists of two depositional sequences (DS) that the lower contact is
erosional (purple shale - type one, SBI or type two, SB2) and the
upper contact is correlative conformity (type two, SB2).
Abstract: Malate dehydrogenase-glutamate oxaloacetate
aminotransferase (MDh-GOAT) enzyme complex (the EC) was
isolated and purified from wheat and rise, their some main physicchemical
properties were studied. Michael-s constants of the EC
MDh-GOAT to malate, glutamate and NAD were investigated. This
kinetic results show a high relationship to glutamate. Taking into
account important role of the the EC in catabolism of glutamate – the
central amino acid of a nitric exchange, there is a sharp necessity of
deeper studying of this enzyme complex. Therefore the basic purpose
of the work is studying the basic physical and chemical properties of
this enzyme complex discovered by us, which would be very
important for understanding the mechanisms of reaction catalyzed by
the EC.
Abstract: This paper presents the study of hardness profile of spur gear heated by induction heating process in function of the machine parameters, such as the power (kW), the heating time (s) and the generator frequency (kHz). The global work is realized by 3D finite-element simulation applied to the process by coupling and resolving the electromagnetic field and the heat transfer problems, and it was performed in three distinguished steps. First, a Comsol 3D model was built using an adequate formulation and taking into account the material properties and the machine parameters. Second, the convergence study was conducted to optimize the mesh. Then, the surface temperatures and the case depths were deeply analyzed in function of the initial current density and the heating time in medium frequency (MF) and high frequency (HF) heating modes and the edge effect were studied. Finally, the simulations results are validated using experimental tests.
Abstract: Recently, genetic algorithms (GA) and particle swarm optimization (PSO) technique have attracted considerable attention among various modern heuristic optimization techniques. The GA has been popular in academia and the industry mainly because of its intuitiveness, ease of implementation, and the ability to effectively solve highly non-linear, mixed integer optimization problems that are typical of complex engineering systems. PSO technique is a relatively recent heuristic search method whose mechanics are inspired by the swarming or collaborative behavior of biological populations. In this paper both PSO and GA optimization are employed for finding stable reduced order models of single-input- single-output large-scale linear systems. Both the techniques guarantee stability of reduced order model if the original high order model is stable. PSO method is based on the minimization of the Integral Squared Error (ISE) between the transient responses of original higher order model and the reduced order model pertaining to a unit step input. Both the methods are illustrated through numerical example from literature and the results are compared with recently published conventional model reduction technique.
Abstract: Aiming at most of the aviation products are facing the problem of fatigue fracture in vibration environment, we makes use of the testing result of a bracket, analysis for the structure with ANSYS-Workbench, predict the life of the bracket by different ways, and compared with the testing result. With the research on analysis methods, make an organic combination of simulation analysis and testing, Not only ensure the accuracy of simulation analysis and life predict, but also make a dynamic supervision of product life process, promote the application of finite element simulation analysis in engineering practice.