Abstract: The acidity of different raw Jordanian clays
containing zeolite, bentonite, red and white kaolinite and diatomite
was characterized by means of temperature programmed desorption
(TPD) of ammonia, conversion of 2-methyl-3-butyn-2-ol (MBOH),
FTIR and BET-measurements. FTIR spectra proved presence of
silanol and bridged hydroxyls on the clay surface. The number of
acidic sites was calculated from experimental TPD-profiles. We
observed the decrease of surface acidity correlates with the decrease
of Si/Al ratio except for diatomite. On the TPD-plot for zeolite two
maxima were registered due to different strength of surface acidic
sites. Values of MBOH conversion, product yields and selectivity
were calculated for the catalysis on Jordanian clays. We obtained that
all clay samples are able to convert MBOH into a major product
which is 3-methyl-3-buten-1-yne (MBYNE) catalyzed by acid
surface sites with the selectivity close to 70%. There was found a
correlation between MBOH conversion and acidity of clays
determined by TPD-NH3, i.e. the higher the acidity the higher the
conversion of MBOH. However, diatomite provided the lowest
conversion of MBOH as result of poor polarization of silanol groups.
Comparison of surface areas and conversions revealed the highest
density of active sites for red kaolinite and the lowest for zeolite and
diatomite.
Abstract: Nowadays, computer worms, viruses and Trojan horse
become popular, and they are collectively called malware. Those
malware just spoiled computers by deleting or rewriting important
files a decade ago. However, recent malware seems to be born to earn
money. Some of malware work for collecting personal information so
that malicious people can find secret information such as password for
online banking, evidence for a scandal or contact address which relates
with the target. Moreover, relation between money and malware
becomes more complex. Many kinds of malware bear bots to get
springboards. Meanwhile, for ordinary internet users,
countermeasures against malware come up against a blank wall.
Pattern matching becomes too much waste of computer resources,
since matching tools have to deal with a lot of patterns derived from
subspecies. Virus making tools can automatically bear subspecies of
malware. Moreover, metamorphic and polymorphic malware are no
longer special. Recently there appears malware checking sites that
check contents in place of users' PC. However, there appears a new
type of malicious sites that avoids check by malware checking sites. In
this paper, existing protocols and methods related with the web are
reconsidered in terms of protection from current attacks, and new
protocol and method are indicated for the purpose of security of the
web.
Abstract: Independent spanning trees (ISTs) provide a number of advantages in data broadcasting. One can cite the use in fault tolerance network protocols for distributed computing and bandwidth. However, the problem of constructing multiple ISTs is considered hard for arbitrary graphs. In this paper we present an efficient algorithm to construct ISTs on hypercubes that requires minimum resources to be performed.
Abstract: Chaiyaphum Starch Co. Ltd. is one of many starch
manufacturers that has introduced machinery to aid in manufacturing.
Even though machinery has replaced many elements and is now a
significant part in manufacturing processes, problems that must be
solved with respect to current process flow to increase efficiency still
exist. The paper-s aim is to increase productivity while maintaining
desired quality of starch, by redesigning the flipping machine-s
mechanical control system which has grossly low functional lifetime.
Such problems stem from the mechanical control system-s bearings,
as fluids and humidity can access into said bearing directly, in
tandem with vibrations from the machine-s function itself. The wheel
which is used to sense starch thickness occasionally falls from its
shaft, due to high speed rotation during operation, while the shaft
may bend from impact when processing dried bread. Redesigning its
mechanical control system has increased its efficiency, allowing
quality thickness measurement while increasing functional lifetime
an additional 62 days.
Abstract: The availability of water in adequate quantity and
quality is imperative for sustainable development. Worldwide,
significant imbalance exists with regards to sustainable development
particularly from a water and sanitation perspective. Water is a
critical component of public health, and failure to supply safe water
will place a heavy burden on the entire population. Although the 21st
century has witnessed wealth and advanced development, it has not
been realized everywhere. Billions of people are still striving to
access the most basic human needs which are food, shelter, safe
drinking water and adequate sanitation. The global picture conceals
various inequalities particularly with regards to sanitation coverage in
rural and urban areas. Currently, water scarcity and in particular
water governance is the main challenge which will cause a threat to
sustainable development goals. Within the context of water,
sanitation and health, sustainable development is a confusing concept
primarily when examined from the viewpoint of policy options for
developing countries. This perspective paper aims to summarize and
critically evaluate evidence of published studies in relation to water,
sanitation and health and to identify relevant solutions to reduce
public health impacts. Evidently, improving water and sanitation
services will result in significant and lasting gains in health and
economic development.
Abstract: We present design, fabrication, and characterization of
a small (12 mm × 12 mm × 8 mm) movable railway vehicle for sensor
carrying. The miniature railway vehicle (MRV) was mainly composed
of a vibrational structure and three legs. A railway was designed and
fabricated to power and guide the MRV. It also transmits the sensed
data from the MRV to the signal processing unit. The MRV with legs
on the railway was moving due to its high-frequency vibration. A
model was derived to describe the motion. Besides, FEM simulations
were performed to design the legs. Then, the MRV and the railway
were fabricated by precision machining. Finally, an infrared sensor
was carried and tested. The result shows that the MRV without loading
was moving along the railway and its maximum speed was 12.2 mm/s.
Moreover, the testing signal was sensed by the MRV.
Abstract: Cu-mesoporous TiO2 is developed for removal acid
odor cooperated with ozone assistance and online- regeneration
system with/without UV irradiation (all weather) in study. The results
showed that Cu-mesoporous TiO2 present the desirable adsorption
efficiency of acid odor without UV irradiation, due to the larger
surface area, pore sizeand the additional absorption ability provided by
Cu. In the photocatalysis process, the material structure also benefits
Cu-mesoporous TiO2 to perform the more outstanding efficiency on
degrading acid odor. Cu also postponed the recombination of
electron-hole pairs excited from TiO2 to enhance photodegradation
ability. Cu-mesoporous TiO2 could gain the conspicuous increase on
photocatalysis ability from ozone assistance, but without any benefit
on adsorption. In addition, the online regeneration procedure could
process the used Cu-mesoporous TiO2 to reinstate the adsorption
ability and maintain the photodegradtion performance, depended on
scrubbing, desorping acid odor and reducing Cu to metal state.
Abstract: Hydrogen is considered to be the most promising
candidate as a future energy carrier. One of the most used
technologies for the electrolytic hydrogen production is alkaline
water electrolysis. However, due to the high energy requirements, the
cost of hydrogen produced in such a way is high. In continuous
search to improve this process using advanced electrocatalytic
materials for the hydrogen evolution reaction (HER), Ni type Raney
and macro-porous Ni-Co electrodes were prepared on AISI 304
stainless steel substrates by electrodeposition. The developed
electrodes were characterized by SEM and confocal laser scanning
microscopy. HER on these electrodes was evaluated in 30 wt.% KOH
solution by means of hydrogen discharge curves and galvanostatic
tests. Results show that the developed electrodes present a most
efficient behaviour for HER when comparing with the smooth Ni
cathode. It has been reported a reduction in the energy consumption
of the electrolysis cell of about 25% by using the developed coatings
as cathodes.
Abstract: Quantitative Investigation of impact of the factors' contribution towards measuring the reusability of software components could be helpful in evaluating the quality of developed or developing reusable software components and in identification of reusable component from existing legacy systems; that can save cost of developing the software from scratch. But the issue of the relative significance of contributing factors has remained relatively unexplored. In this paper, we have use the Taguchi's approach in analyzing the significance of different structural attributes or factors in deciding the reusability level of a particular component. The results obtained shows that the complexity is the most important factor in deciding the better Reusability of a function oriented Software. In case of Object Oriented Software, Coupling and Complexity collectively play significant role in high reusability.
Abstract: Sophorolipids (SLs) production by the yeast Candida
bombicola was studied in batch shake flasks using synthetic dairy
wastewaters (SDWW) with or without any added external carbon and
nitrogen sources. A maximum SLs production of 38.76 g/l was
observed with the SDWW supplemented with low cost substrate of
sugarcane molasses at 50 g/l and soybean oil at 50 g/l. When the
SDWW was supplemented with more costly glucose, yeast extract,
urea and soybean oil, the production, however, got lowered to only
29.49 g/l, but with a maximum biomass production of 17.38 g/l
together with a complete utilization of the carbon sources.
Abstract: The stilling basins are commonly used to dissipate the
energy and protect the downstream floor from erosion. The aim of
the present experimental work is to improve the roughened stilling
basin using T-shape roughness instead of the regular cubic one and
design this new shape. As a result of the present work the best
intensity and the best roughness length are identified. Also, it is
found that the T-shape roughness save materials and reduce the jump
length compared to the cubic one. Sensitivity analysis was performed
and it was noticed that the change in the length of jump is more
sensitive to the change in roughness length than the change in
intensity.
Abstract: Medical image modalities such as computed
tomography (CT), magnetic resonance imaging (MRI), ultrasound
(US), X-ray are adapted to diagnose disease. These modalities
provide flexible means of reviewing anatomical cross-sections and
physiological state in different parts of the human body. The raw
medical images have a huge file size and need large storage
requirements. So it should be such a way to reduce the size of those
image files to be valid for telemedicine applications. Thus the image
compression is a key factor to reduce the bit rate for transmission or
storage while maintaining an acceptable reproduction quality, but it is
natural to rise the question of how much an image can be compressed
and still preserve sufficient information for a given clinical
application. Many techniques for achieving data compression have
been introduced. In this study, three different MRI modalities which
are Brain, Spine and Knee have been compressed and reconstructed
using wavelet transform. Subjective and objective evaluation has
been done to investigate the clinical information quality of the
compressed images. For the objective evaluation, the results show
that the PSNR which indicates the quality of the reconstructed image
is ranging from (21.95 dB to 30.80 dB, 27.25 dB to 35.75 dB, and
26.93 dB to 34.93 dB) for Brain, Spine, and Knee respectively. For
the subjective evaluation test, the results show that the compression
ratio of 40:1 was acceptable for brain image, whereas for spine and
knee images 50:1 was acceptable.
Abstract: Cryptography provides the secure manner of
information transmission over the insecure channel. It authenticates
messages based on the key but not on the user. It requires a lengthy
key to encrypt and decrypt the sending and receiving the messages,
respectively. But these keys can be guessed or cracked. Moreover,
Maintaining and sharing lengthy, random keys in enciphering and
deciphering process is the critical problem in the cryptography
system. A new approach is described for generating a crypto key,
which is acquired from a person-s iris pattern. In the biometric field,
template created by the biometric algorithm can only be
authenticated with the same person. Among the biometric templates,
iris features can efficiently be distinguished with individuals and
produces less false positives in the larger population. This type of iris
code distribution provides merely less intra-class variability that aids
the cryptosystem to confidently decrypt messages with an exact
matching of iris pattern. In this proposed approach, the iris features
are extracted using multi resolution wavelets. It produces 135-bit iris
codes from each subject and is used for encrypting/decrypting the
messages. The autocorrelators are used to recall original messages
from the partially corrupted data produced by the decryption process.
It intends to resolve the repudiation and key management problems.
Results were analyzed in both conventional iris cryptography system
(CIC) and non-repudiation iris cryptography system (NRIC). It
shows that this new approach provides considerably high
authentication in enciphering and deciphering processes.
Abstract: This paper presents a threshold voltage model of pocket implanted sub-100 nm n-MOSFETs incorporating the drain and substrate bias effects using two linear pocket profiles. Two linear equations are used to simulate the pocket profiles along the channel at the surface from the source and drain edges towards the center of the n-MOSFET. Then the effective doping concentration is derived and is used in the threshold voltage equation that is obtained by solving the Poisson-s equation in the depletion region at the surface. Simulated threshold voltages for various gate lengths fit well with the experimental data already published in the literature. The simulated result is compared with the two other pocket profiles used to derive the threshold voltage models of n-MOSFETs. The comparison shows that the linear model has a simple compact form that can be utilized to study and characterize the pocket implanted advanced ULSI devices.
Abstract: Rainfall data at fine resolution and knowledge of its
characteristics plays a major role in the efficient design and operation
of agricultural, telecommunication, runoff and erosion control as well
as water quality control systems. The paper is aimed to study the
statistical distribution of hourly rainfall depth for 12 representative
stations spread across Peninsular Malaysia. Hourly rainfall data of 10
to 22 years period were collected and its statistical characteristics
were estimated. Three probability distributions namely, Generalized
Pareto, Exponential and Gamma distributions were proposed to
model the hourly rainfall depth, and three goodness-of-fit tests,
namely, Kolmogorov-Sminov, Anderson-Darling and Chi-Squared
tests were used to evaluate their fitness. Result indicates that the east
cost of the Peninsular receives higher depth of rainfall as compared
to west coast. However, the rainfall frequency is found to be
irregular. Also result from the goodness-of-fit tests show that all the
three models fit the rainfall data at 1% level of significance.
However, Generalized Pareto fits better than Exponential and
Gamma distributions and is therefore recommended as the best fit.
Abstract: The large and small-scale shaking table tests, which
was conducted for investigating damage evolution of piles inside
liquefied soil, are numerically simulated and experimental verified by the3D nonlinear finite element analysis. Damage evolution of
elasto-plastic circular steel piles and reinforced concrete (RC) one with cracking and yield of reinforcement are focused on, and the failure patterns and residual damages are captured by the proposed constitutive models. The superstructure excitation behind quay wall is
reproduced as well.
Abstract: In Indonesia, goat milk is often consumed and
believed as anti-allergy. The objective of this research was to study
the effect of goat milk and their fractions (casein and whey)
supplementation on total serum IgE concentrations and leukocytes
count in rat sensitized with contact allergen dinitrochlorobenzene
(DNCB). Female Wistar rats 6-8 weeks old were divided into four
groups: 1) whey, 2) casein, 3) whole milk supplementation and 4)
phosphate-buffered saline/PBS (control). The results showed that
supplementation of goat milk on rats did not affects on total serum
IgE concentrations and number of leukocytes. After sensitized with
DNCB, the monocyte percentage in rats was higher (P
Abstract: The convergence of heterogeneous wireless access technologies characterizes the 4G wireless networks. In such converged systems, the seamless and efficient handoff between
different access technologies (vertical handoff) is essential and remains a challenging problem. The heterogeneous co-existence of access technologies with largely different characteristics creates a decision problem of determining the “best" available network at
“best" time to reduce the unnecessary handoffs. This paper proposes a dynamic decision model to decide the “best" network at “best"
time moment to handoffs. The proposed dynamic decision model make the right vertical handoff decisions by determining the “best"
network at “best" time among available networks based on, dynamic
factors such as “Received Signal Strength(RSS)" of network and
“velocity" of mobile station simultaneously with static factors like Usage Expense, Link capacity(offered bandwidth) and power
consumption. This model not only meets the individual user needs but also improve the whole system performance by reducing the unnecessary handoffs.
Abstract: Friction-stir welding has received a huge interest in the last few years. The many advantages of this promising process have led researchers to present different theoretical and experimental explanation of the process. The way to quantitatively and qualitatively control the different parameters of the friction-stir welding process has not been paved. In this study, a refined energybased model that estimates the energy generated due to friction and plastic deformation is presented. The effect of the plastic deformation at low energy levels is significant and hence a scale factor is introduced to control its effect. The predicted heat energy and the obtained maximum temperature using our model are compared to the theoretical and experimental results available in the literature and a good agreement is obtained. The model is applied to AA6000 and AA7000 series.
Abstract: Experimental investigations were made on the instability of supercritical kerosene flowing in active cooling channels. Two approaches were used to control the pressure in the channel. One is the back-pressure valve while the other is the venturi. In both conditions, a kind of low-frequency oscillation of pressure and temperature is observed. And the oscillation periods are calculated. By comparison with the flow time, it is concluded that the instability occurred in active cooling channels is probably one kind of density wave instability. And its period has no relationship with the cooling channel geometry, nor the pressure, but only depends on the flow time of kerosene in active cooling channels. When the mass flow rate, density and pressure drop couple with each other, the density wave instability will appear.