Abstract: In wireless and mobile communications, this progress
provides opportunities for introducing new standards and improving
existing services. Supporting multimedia traffic with wireless networks
quality of service (QoS). In this paper, a grey-fuzzy controller for radio
resource management (GF-RRM) is presented to maximize the number
of the served calls and QoS provision in wireless networks. In a
wireless network, the call arrival rate, the call duration and the
communication overhead between the base stations and the control
center are vague and uncertain. In this paper, we develop a method to
predict the cell load and to solve the RRM problem based on the
GF-RRM, and support the present facility has been built on the
application-level of the wireless networks. The GF-RRM exhibits the
better adaptability, fault-tolerant capability and performance than other
algorithms. Through simulations, we evaluate the blocking rate, update
overhead, and channel acquisition delay time of the proposed method.
The results demonstrate our algorithm has the lower blocking rate, less
updated overhead, and shorter channel acquisition delay.
Abstract: The error monitoring and processing system, EMPS is
the system located in the substantia nigra of the midbrain, basal
ganglia and cortex of the forebrain, and plays a leading role in error
detection and correction. The main components of EMPS are the
dopaminergic system and anterior cingulate cortex. Although, recent
studies show that alcohol disrupts the EMPS, the ways in which
alcohol affects this system are poorly understood. Based on current
literature data, here we suggest a hypothesis of alcohol-related
glucose-dependent system of error monitoring and processing, which
holds that the disruption of the EMPS is related to the competency of
glucose homeostasis regulation, which in turn may determine the
dopamine level as a major component of EMPS. Alcohol may
indirectly disrupt the EMPS by affecting dopamine level through
disorders in blood glucose homeostasis regulation.
Abstract: The fast growth in complexity coupled with requests for shorter development periods for embedded systems are bringing demands towards a more effective, i.e. higher-abstract, design process for hardaware/software integrated design. In Software Engineering area, Model Driven Architecture (MDA) and Executable UML (xUML) has been accepted to bring further improvement in software design. This paper constructs MDA and xUML stepwise transformations from an abstract specification model to a more concrete implementation model using the refactoring technique for hardaware/software integrated design. This approach provides clear and structured models which enables quick exploration and synthesis, and early stage verification.
Abstract: Mobile learning (M-learning) integrates mobile
devices and wireless computing technology to enhance the current
conventional learning system. However, there are constraints which
are affecting the implementation of platform and device independent
M-learning. The main aim of this research is to fulfill the following
main objectives: to develop platform independent mobile learning
tool (M-LT) for structured programming course, and evaluate its
effectiveness and usability using ADDIE instructional design model
(ISD) as M-LT life cycle. J2ME (Java 2 micro edition) and XML
(Extensible Markup Language) were used to develop platform
independent M-LT. It has two modules lecture materials and quizzes.
This study used Quasi experimental design to measure effectiveness
of the tool. Meanwhile, questionnaire is used to evaluate the usability
of the tool. Finally, the results show that the system was effective and
also usability evaluation was positive.
Abstract: This paper presents the design and layout of a two stage, high speed operational amplifiers using standard 0.35um CMOS technology. The design procedure involves designing the bias circuit, the differential input pair, and the gain stage using CAD tools. Both schematic and layout of the operational amplifier along with the comparison in the results of the two has been presented. The operational amplifier designed, has a gain of 93.51db at low frequencies. It has a gain bandwidth product of 55.07MHz, phase margin of 51.9º and a slew rate of 22v/us for a load of capacitor of 10pF.
Abstract: Based on different experiences in the historic centers
of Spain, we propose an global strategy for the regeneration of the
pre-tertiary fabrics and its application to the specific case of San
Mateo neighborhood, in Jerez de la Frontera (Andalusia), through a
diagnosis that focus particularly on the punishments the last-decade
economic situation (building boom and crisis) and shows the tragic
transition from economic center to an imminent disappearance with
an image similar to the ruins of war, due to the loss of their
traditional roles. From it we will learn their historically-tested
mechanisms of environment adaptation, which distill the vernacular
architecture essence and that we will apply to our strategy of action
based on a dotacional-and-free-space rhizome which rediscovers its
hidden character. The architectural fact will be crystallized in one of
the example-pieces proposed: The Artistic Revitalization Center.
Abstract: Severe heart failure is a common problem that has a significant effect on health expenditures in industrialized countries; moreover it reduces patient-s quality of life. However, current research usually focuses either on detailed modeling of the heart or on detailed modeling of the cardiovascular system. Thus, this paper aims to present a sophisticated model of the heart enhanced with an extensive model of the cardiovascular system. Special interest is on the pressure and flow values close to the heart since these values are critical to accurately diagnose causes of heart failure. The model is implemented in Dymola an object-oriented, physical modeling language. Results achieved with the novel model show overall feasibility of the approach. Moreover, results are illustrated and compared to other models. The novel model shows significant improvements.
Abstract: Hybrid photovoltaic thermal (PV/T) solar system comprises a solar collector which is disposed on photovoltaic solar cells. The disadvantage of a conventional photovoltaic cell is that its performance decreases as the temperature increases. Indeed, part of the solar radiation is converted into electricity and is dissipated as heat, increasing the temperature of the photovoltaic cell with respect to the ambient temperature. The objective of this work is to study experimentally and implement a hybrid prototype to evaluate electrical and thermal performance. In this paper, an experimental study of two new configurations of hybrid collectors is exposed. The results are given and interpreted. The two configurations of absorber studied are a new combination with tubes and galvanized tank, the other is a tubes and sheet.
Abstract: This study presents energy saving in general-purpose
pumps widely used in industrial applications. Such pumps are
normally driven by a constant-speed electrical motor which in most
applications must support varying load conditions. This is equivalent
to saying the loading conditions mismatch the designed optimal
energy consumption requirements of the intended application thus
resulting in substantial energy losses. In the held experiments it was
indicated that combination of mechanical and electrical speed drives
can contribute to lower energy consumption in the pump without
negatively distorting the required performance indices of a typical
centrifugal pump at substantially lower energy consumption. The
registered energy savings were recorded to be within the 15-40%
margin. It was also indicated that although VSDs are installed at a
cost, the financial burden is balanced against the earnings resulting
from the associated energy savings.
Abstract: There are multiple ways to implement a decimator
filter. This paper addresses usage of CIC (cascaded-integrator-comb)
filter and HB (half band) filter as the decimator filter to reduce the
frequency sample rate by factor of 64 and detail of the
implementation step to realize this design in hardware. Low power
design approach for CIC filter and half band filter will be discussed.
The filter design is implemented through MATLAB system
modeling, ASIC (application specific integrated circuit) design flow
and verified using a FPGA (field programmable gate array) board
and MATLAB analysis.
Abstract: Increasing user comfort and reducing operation costs
have always been primary objectives of lighting control strategies in a
building. This paper proposes an architecture of the lighting control
system for a daylit office. The system consists of the lighting
controller, A/D & D/A converter, dimmable LED lights, and the
lighting management software. Verification tests are conducted using
the proposed system specialized for the interior lighting of a open-plan
office. The results showed the proposed architecture of the lighting
system would improve the overall system reliability, lower the system
cost, and provide ease of installation and maintenance.
Abstract: Objective: The objective of this paper is to assess the
hospitals preparedness for emergency using WHO standards.
Method: This is a cross-sectional study, consisted of site visit,
questionnaire survey, 16 health facilities were included. The WHO
standard for emergency preparedness of health facilities was used to
evaluate and assess the hospitals preparedness of health facilities.
Result: 13 hospitals were responded. They scored below average
in all measure >75%), while above average score was in 7 out 9 nine
measure with a range of 8%-25%. Un acceptable below average was
noted in two measures only.
Discussion: The biggest challenge facing the hospitals in their
emergency intervention is the lack of pre-emergency and emergency
preparedness plans as well as the coordination of the hospitals
response mechanisms.
Conclusion: The studied hospitals presently are far from
international disasters preparedness protocols. That necessitates
improvements in emergency preparedness, as well as in physician
skills for injury management.
Abstract: At present, dictionary attack has been the basic tool for
recovering key passwords. In order to avoid dictionary attack, users
purposely choose another character strings as passwords. According to
statistics, about 14% of users choose keys on a keyboard (Kkey, for
short) as passwords. This paper develops a framework system to attack
the password chosen from Kkeys and analyzes its efficiency. Within
this system, we build up keyboard rules using the adjacent and parallel
relationship among Kkeys and then use these Kkey rules to generate
password databases by depth-first search method. According to the
experiment results, we find the key space of databases derived from
these Kkey rules that could be far smaller than the password databases
generated within brute-force attack, thus effectively narrowing down
the scope of attack research. Taking one general Kkey rule, the
combinations in all printable characters (94 types) with Kkey adjacent
and parallel relationship, as an example, the derived key space is about
240 smaller than those in brute-force attack. In addition, we
demonstrate the method's practicality and value by successfully
cracking the access password to UNIX and PC using the password
databases created
Abstract: In this paper, the shape design process is briefly discussed emphasizing the use of topology optimization in the conceptual design stage. The basic idea is to view feasible domains for sensitivity region concepts. In this method, the main process consists of two steps: as the design moves further inside the feasible domain using Taguchi method, and thus becoming more successful topology optimization, the sensitivity region becomes larger. In designing a double-eccentric butterfly valve, related to hydrodynamic performance and disc structure, are discussed where the use of topology optimization has proven to dramatically improve an existing design and significantly decrease the development time of a shape design. Computational Fluid Dynamics (CFD) analysis results demonstrate the validity of this approach.
Abstract: Chinese Idioms are a type of traditional Chinese idiomatic
expressions with specific meanings and stereotypes structure
which are widely used in classical Chinese and are still common in
vernacular written and spoken Chinese today. Currently, Chinese
Idioms are retrieved in glossary with key character or key word in
morphology or pronunciation index that can not meet the need of
searching semantically. OCIRS is proposed to search the desired
idiom in the case of users only knowing its meaning without any key
character or key word. The user-s request in a sentence or phrase will
be grammatically analyzed in advance by word segmentation, key
word extraction and semantic similarity computation, thus can be
mapped to the idiom domain ontology which is constructed to provide
ample semantic relations and to facilitate description logics-based
reasoning for idiom retrieval. The experimental evaluation shows that
OCIRS realizes the function of searching idioms via semantics, obtaining
preliminary achievement as requested by the users.
Abstract: Based on the sources- smoothed rank profile (SRP) and modified minimum description length (MMDL) principle, a method for estimation of the source coherency structure (SCS) and the number of wideband sources is proposed in this paper. Instead of focusing, we first use a spatial smoothing technique to pre-process the array covariance matrix of each frequency for de-correlating the sources and then use smoothed rank profile to determine the SCS and the number of wideband sources. We demonstrate the availability of the method by numerical simulations.
Abstract: Severe acute respiratory syndrome (SARS) is a respiratory disease in humans which is caused by the SARS coronavirus. The treatment of coronavirus-associated SARS has been evolving and so far there is no consensus on an optimal regimen. The mainstream therapeutic interventions for SARS involve broad-spectrum antibiotics and supportive care, as well as antiviral agents and immunomodulatory therapy. The Protein- Ligand interaction plays a significant role in structural based drug designing. In the present work we have taken the receptor Angiotensin converting enzyme 2 and identified the drugs that are commonly used against SARS. They are Lopinavir, Ritonavir, Ribavirin, and Oseltamivir. The receptor Angiotensin converting enzyme 2 (ACE-2) was docked with above said drugs and the energy value obtained are as follows, Lopinavir (-292.3), Ritonavir (-325.6), Oseltamivir (- 229.1), Ribavirin (-208.8). Depending on the least energy value we have chosen the best two drugs out of the four conventional drugs. We tried to improve the binding efficiency and steric compatibility of the two drugs namely Ritonavir and Lopinavir. Several modifications were made to the probable functional groups (phenylic, ketonic groups in case of Ritonavir and carboxylic groups in case of Lopinavir respectively) which were interacting with the receptor molecule. Analogs were prepared by Marvin Sketch software and were docked using HEX docking software. Lopinavir analog 8 and Ritonavir analog 11 were detected with significant energy values and are probable lead molecule. It infers that some of the modified drugs are better than the original drugs. Further work can be carried out to improve the steric compatibility of the drug based upon the work done above for a more energy efficient binding of the drugs to the receptor.
Abstract: In this work, position vector of a time-like dual curve
according to standard frame of D31
is investigated. First, it is proven
that position vector of a time-like dual curve satisfies a dual vector
differential equation of fourth order. The general solution of this dual
vector differential equation has not yet been found. Due to this, in
terms of special solutions, position vectors of some special time-like
dual curves with respect to standard frame of D31
are presented.
Abstract: This paper deals with stability analysis for synchronous reluctance motors drive. Special attention is paid to the transient performance with variations in motor's parameters such as Ld and Rs. A study of the dynamic control using d-q model is presented first in order to clarify the stability of the motor drive system. Based on the experimental parameters of the synchronous reluctance motor, this paper gives some simulation results using MATLAB/SIMULINK software packages. It is concluded that the motor parameters, especially Ld, affect the estimator stability and hence the whole drive system.
Abstract: A new reverse phase-high performance liquid chromatography (RP-HPLC) method with fluorescent detector (FLD) was developed and optimized for Norfloxacin determination in human plasma. Mobile phase specifications, extraction method and excitation and emission wavelengths were varied for optimization. HPLC system contained a reverse phase C18 (5 μm, 4.6 mm×150 mm) column with FLD operated at excitation 330 nm and emission 440 nm. The optimized mobile phase consisted of 14% acetonitrile in buffer solution. The aqueous phase was prepared by mixing 2g of citric acid, 2g sodium acetate and 1 ml of triethylamine in 1 L of Milli-Q water was run at a flow rate of 1.2 mL/min. The standard curve was linear for the range tested (0.156–20 μg/mL) and the coefficient of determination was 0.9978. Aceclofenac sodium was used as internal standard. A detection limit of 0.078 μg/mL was achieved. Run time was set at 10 minutes because retention time of norfloxacin was 0.99 min. which shows the rapidness of this method of analysis. The present assay showed good accuracy, precision and sensitivity for Norfloxacin determination in human plasma with a new internal standard and can be applied pharmacokinetic evaluation of Norfloxacin tablets after oral administration in human.