Abstract: Stocking density is considered one of the important
factors affecting fish growth. But, information related to impact of
stocking density on growth performance of monosex tilapia population
under the ecological conditions of Gangetic plains in West Bengal,
India is limited. The aim of our study was to compare the growth
potential of monosex tilapia at various stocking densities and to
determine an ideal stocking density for culture of all-male monosex
fish. The males were isolated by examination of genital papilla region
and were stocked separately in 0.01 ha earthen ponds at different
stocking densities (5000, 10000, 15000, 20000, 25000 and 30000
fingerlings/ha). It was found that the highest weight, length, daily
weight gain, growth rate and protein content were observed for the
20000 fish/ha density class. Thus, culture of monosex tilapia at a
density of 20000 fish/ha can be considered ideal for augmented
production of the fish under Indian context.
Abstract: In this study, the effect of greywater irrigation on airwater interfacial area is investigated. Several soil column experiments were conducted for different greywater irrigation to develop the pressure-saturation curves. Surface tension was measured for different greywater concentration and fitted for Gibbs adsorption equation. Pressure-saturation curves show that the reduction of capillary rise stops when it reaches its critical micelle concentration (CMC). A simple theory is derived from pressure-saturation curves for calculating air-water interfacial area in porous medium during greywater irrigation by introducing a term 'hydraulic radius' for the pores. This term diminishes any effect of pore shapes on the air-water interfacial area. The air-water interfacial area was calculated using the pressure-saturation curves and found that it decreases with increasing moisture content. But no significant effect was observed on air-water interfacial area for different greywater irrigation. A maximum of 10% variation in interfacial area was observed at the residual saturation zone.
Abstract: The process of laser absorption in the skin during
laser irradiation was a critical point in medical application
treatments. Delivery the correct amount of laser light is a critical
element in photodynamic therapy (PDT). More amounts of laser
light able to affect tissues in the skin and small amount not able to
enhance PDT procedure in skin. The knowledge of the skin tone
laser dependent distribution of 635 nm radiation and its penetration
depth in skin is a very important precondition for the investigation of
advantage laser induced effect in (PDT) in epidermis diseases
(psoriasis). The aim of this work was to estimate an optimum effect
of diode laser (635 nm) on the treatment of epidermis diseases in
different color skin. Furthermore, it is to improve safety of laser in
PDT in epidermis diseases treatment. Advanced system analytical
program (ASAP) which is a new approach in investigating the PDT,
dependent on optical properties of different skin color was used in
present work. A two layered Realistic Skin Model (RSM); stratum
corneum and epidermal with red laser (635 nm, 10 mW) were used
for irradiative transfer to study fluence and absorbance in different
penetration for various human skin colors. Several skin tones very
fair, fair, light, medium and dark are used to irradiative transfer. This
investigation involved the principles of laser tissue interaction when
the skin optically injected by a red laser diode. The results
demonstrated that the power characteristic of a laser diode (635 nm)
can affect the treatment of epidermal disease in various color skins.
Power absorption of the various human skins were recorded and
analyzed in order to find the influence of the melanin in PDT
treatment in epidermal disease. A two layered RSM show that the
change in penetration depth in epidermal layer of the color skin has a
larger effect on the distribution of absorbed laser in the skin; this is
due to the variation of the melanin concentration for each color.
Abstract: This paper presents the application of an enhanced
Particle Swarm Optimization (EPSO) combined with Gaussian
Mutation (GM) for solving the Dynamic Economic Dispatch (DED)
problem considering the operating constraints of generators. The
EPSO consists of the standard PSO and a modified heuristic search
approaches. Namely, the ability of the traditional PSO is enhanced
by applying the modified heuristic search approach to prevent the
solutions from violating the constraints. In addition, Gaussian
Mutation is aimed at increasing the diversity of global search, whilst
it also prevents being trapped in suboptimal points during search. To
illustrate its efficiency and effectiveness, the developed EPSO-GM
approach is tested on the 3-unit and 10-unit 24-hour systems
considering valve-point effect. From the experimental results, it can
be concluded that the proposed EPSO-GM provides, the accurate
solution, the efficiency, and the feature of robust computation
compared with other algorithms under consideration.
Abstract: Array signal processing involves signal enumeration and source localization. Array signal processing is centered on the ability to fuse temporal and spatial information captured via sampling signals emitted from a number of sources at the sensors of an array in order to carry out a specific estimation task: source characteristics (mainly localization of the sources) and/or array characteristics (mainly array geometry) estimation. Array signal processing is a part of signal processing that uses sensors organized in patterns or arrays, to detect signals and to determine information about them. Beamforming is a general signal processing technique used to control the directionality of the reception or transmission of a signal. Using Beamforming we can direct the majority of signal energy we receive from a group of array. Multiple signal classification (MUSIC) is a highly popular eigenstructure-based estimation method of direction of arrival (DOA) with high resolution. This Paper enumerates the effect of missing sensors in DOA estimation. The accuracy of the MUSIC-based DOA estimation is degraded significantly both by the effects of the missing sensors among the receiving array elements and the unequal channel gain and phase errors of the receiver.
Abstract: In the present study, 49 Hybrid (Catla catla ♂ x
Labeo rohita ♀) were sampled from Al-Raheem Fish Hatchery,
Village Ali Pure Shamali, Jhang Road, 18 Km from Muzaffar Garh
using a cast net and Live fishes were transported to research
laboratory. Mean percentage for water found 79.13 %, ash 6.58 %, fat
2.22 % and protein content 12.06 % in whole wet body weight. It was
observed that body constituents were found increasing in the same
proportion with an increase in body weight while significant
proportional increase was observed with total length. However,
condition factor remained insignificant (P>0.05) with body
constituents.
Abstract: Fatigue is the major threat in service of steel structure
subjected to fluctuating loads. With the additional effect of corrosion
and presence of weld joints the fatigue failure may become more
critical in structural steel. One of the apt examples of such structural
is the sailing ship. This is experiencing a constant stress due to
floating and a pulsating bending load due to the waves. This paper
describes an attempt to verify theory of fatigue in fracture mechanics
approach with experimentation to determine the constants of crack
growth curve. For this, specimen is prepared from the ship building
steel and it is subjected to a pulsating bending load with a known
defect. Fatigue crack and its nature is observed in this experiment.
Application of fracture mechanics approach in fatigue with a simple
practical experiment is conducted and constants of crack growth
equation are investigated.
Abstract: One of the main consequences of the ubiquitous usage of Internet as a means to conduct business has been the progressive internationalization of contracts created to support such transactions. As electronic commerce becomes International commerce, the reality is that commercial disputes will occur creating such questions as: "In which country do I bring proceedings?" and "Which law is to be applied to solve disputes?" The decentralized and global structure of the Internet and its decentralized operation have given e-commerce a transnational element that affects two questions essential to any transaction: applicable law and jurisdiction in the event of dispute. The sharing of applicable law and jurisdiction among States in respect of international transactions traditionally has been based on the use of contact factors generally of a territorial nature (the place where real estate is located, customary residence, principal establishment, place of shipping goods). The characteristics of the Internet as a new space sometimes make it difficult to apply these rules, and may make them inoperative or lead to results that are surprising or totally foreign to the contracting parties and other elements and circumstances of the case.
Abstract: Flood zoning studies have become more efficient in
recent years because of the availability of advanced computational
facilities and use of Geographic Information Systems (GIS). In the
present study, flood inundated areas were mapped using GIS for the
Dikrong river basin of Arunachal Pradesh, India, corresponding to
different return periods (2, 5, 25, 50, and 100 years). Further, the developed inundation maps corresponding to 25, 50, and 100 year return period floods were compared to corresponding maps
developed by conventional methods as reported in the Brahmaputra Board Master Plan for Dikrong basin. It was found that, the average
deviation of modelled flood inundation areas from reported map
inundation areas is below 5% (4.52%). Therefore, it can be said that
the modelled flood inundation areas matched satisfactorily with
reported map inundation areas. Hence, GIS techniques were proved to be successful in extracting the flood inundation extent in a time and cost effective manner for the remotely located hilly basin of Dikrong, where conducting conventional surveys is very difficult.
Abstract: Autism spectrum disorder is characterized by
abnormalities in social communication, language abilities and
repetitive behaviors. The present study focused on some grammatical
deficits in autistic children. We evaluated the impairment of correct
use of different Persian verb tenses in autistic children-s speech. Two
standardized Language Test were administered then gathered data
were analyzed. The main result of this study was significant
difference between the mean scores of correct responses to present
tense in comparison with past tense in Persian language. This study
demonstrated that tense is severely impaired in autistic children-s
speech. Our findings indicated those autistic children-s production of
simple present/ past tense opposition to be better than production of
future and past periphrastic forms (past perfect, present perfect, past
progressive).
Abstract: Yield and Crop Water Productivity are crucial issues
in sustainable agriculture, especially in high-demand resource crops such as sweet corn. This study was conducted to investigate
agronomic responses such as plant growth, yield and soil parameters (EC and Nitrate accumulation) to several deficit irrigation treatments
(100, 75, 50, 25 and 0% of ETm) applied during vegetative growth
stage, rainfed treatment was also tested.
The finding of this research indicates that under deficit irrigation
during vegetative growth stage applying 75% of ETm lead to increasing of 19.4% in terms of fresh ear yield, 9.4% in terms of dry grain yield, 10.5% in terms of number of ears per plant, 11.5% for
the 1000 grains weight and 19% in terms of crop water productivity compared with fully irrigated treatment. While those parameters in
addition to root, shoot and plant height has been affected by deficit
irrigation during vegetative growth stage when increasing water stress degree more than 50% of ETm.
Abstract: Lectins have a good scope in current clinical
microbiology research. In the present study evaluated the
antimicrobial activities of a D-galactose binding lectin (PnL) was
purified from the annelid, Perinereis nuntia (polychaeta) by affinity
chromatography. The molecular mass of the lectin was determined to
be 32 kDa as a single polypeptide by SDS-PAGE under both reducing
and non-reducing conditions. The hemagglutinating activity of the
PnL showed against trypsinized and glutaraldehyde-fixed human
erythrocytes was specifically inhibited by D-Gal, GalNAc,
Galβ1-4Glc and Galα1-6Glc. PnL was evaluated for in vitro
antibacterial screening studies against 11 gram-positive and
gram-negative microorganisms. From the screening results, it was
revealed that PnL exhibited significant antibacterial activity against
gram-positive bacteria. Bacillus megaterium showed the highest
growth inhibition by the lectin (250 μg/disc). However, PnL did not
inhibit the growth of gram-negative bacteria such as Vibrio cholerae
and Pseudomonas sp. PnL was also examined for in vitro antifungal
activity against six fungal phytopathogens. PnL (100 μg/mL) inhibited
the mycelial growth of Alternaria alternata (24.4%). These results
indicate that future findings of lectin applications obtained from
annelids may be of importance to life sciences.
Abstract: Chatter vibration has been a troublesome problem for a
machine tool toward the high precision and high speed machining.
Essentially, the machining performance is determined by the dynamic
characteristics of the machine tool structure and dynamics of cutting
process. Therefore the dynamic vibration behavior of spindle tool
system greatly determines the performance of machine tool. The
purpose of this study is to investigate the influences of the machine
frame structure on the dynamic frequency of spindle tool unit through
finite element modeling approach. To this end, a realistic finite
element model of the vertical milling system was created by
incorporated the spindle-bearing model into the spindle head stock of
the machine frame. Using this model, the dynamic characteristics of
the milling machines with different structural designs of spindle head
stock and identical spindle tool unit were demonstrated. The results of
the finite element modeling reveal that the spindle tool unit behaves
more compliant when the excited frequency approaches the natural
mode of the spindle tool; while the spindle tool show a higher dynamic
stiffness at lower frequency that may be initiated by the structural
mode of milling head. Under this condition, it is concluded that the
structural configuration of spindle head stock associated with the
vertical column of milling machine plays an important role in
determining the machining dynamics of the spindle unit.
Abstract: The bromination of five selected pharmaceuticals
(metoprolol, naproxen, amoxicillin, hydrochlorotiazide and
phenacetin) in ultrapure water and in three water matrices (a
groundwater, a surface water from a public reservoir and a secondary
effluent from a WWTP) was investigated. The apparent rate
constants for the bromination reaction were determined as a function
of the pH, and the sequence obtained for the reaction rate was
amoxicillin > naproxen >> hydrochlorotiazide ≈ phenacetin ≈
metoprolol. The proposal of a kinetic mechanism, which specifies the
dissociation of bromine and each pharmaceutical according to their
pKa values and the pH allowed the determination of the intrinsic rate
constants for every elementary reaction. The influence of the main
operating conditions (pH, initial bromine dose, and the water matrix)
on the degradation of pharmaceuticals was established. In addition,
the presence of bromide in chlorination experiments was
investigated. The presence of bromide in wastewaters and drinking
waters in the range of 10 to several hundred μg L-1 accelerated
slightly the oxidation of the selected pharmaceuticals during chorine
disinfection.
Abstract: Air bending is one of the important metal forming
processes, because of its simplicity and large field application.
Accuracy of analytical and empirical models reported for the analysis
of bending processes is governed by simplifying assumption and do
not consider the effect of dynamic parameters. Number of researches
is reported on the finite element analysis (FEA) of V-bending, Ubending,
and air V-bending processes. FEA of bending is found to be
very sensitive to many physical and numerical parameters. FE
models must be computationally efficient for practical use. Reported
work shows the 3D FEA of air bending process using Hyperform LSDYNA
and its comparison with, published 3D FEA results of air
bending in Ansys LS-DYNA and experimental results. Observing the
planer symmetry and based on the assumption of plane strain
condition, air bending problem was modeled in 2D with symmetric
boundary condition in width. Stress-strain results of 2D FEA were
compared with 3D FEA results and experiments. Simplification of
air bending problem from 3D to 2D resulted into tremendous
reduction in the solution time with only marginal effect on stressstrain
results. FE model simplification by studying the problem
symmetry is more efficient and practical approach for solution of
more complex large dimensions slow forming processes.
Abstract: Background noise is particularly damaging to speech
intelligibility for people with hearing loss especially for sensorineural
loss patients. Several investigations on speech intelligibility have
demonstrated sensorineural loss patients need 5-15 dB higher SNR
than the normal hearing subjects. This paper describes Discrete
Cosine Transform Power Normalized Least Mean Square algorithm
to improve the SNR and to reduce the convergence rate of the LMS
for Sensory neural loss patients. Since it requires only real arithmetic,
it establishes the faster convergence rate as compare to time domain
LMS and also this transformation improves the eigenvalue
distribution of the input autocorrelation matrix of the LMS filter.
The DCT has good ortho-normal, separable, and energy compaction
property. Although the DCT does not separate frequencies, it is a
powerful signal decorrelator. It is a real valued function and thus
can be effectively used in real-time operation. The advantages of
DCT-LMS as compared to standard LMS algorithm are shown via
SNR and eigenvalue ratio computations. . Exploiting the symmetry
of the basis functions, the DCT transform matrix [AN] can be
factored into a series of ±1 butterflies and rotation angles. This
factorization results in one of the fastest DCT implementation. There
are different ways to obtain factorizations. This work uses the fast
factored DCT algorithm developed by Chen and company. The
computer simulations results show superior convergence
characteristics of the proposed algorithm by improving the SNR at
least 10 dB for input SNR less than and equal to 0 dB, faster
convergence speed and better time and frequency characteristics.
Abstract: On the territory of France fenugreek is spread since long on a line from the Gironde to the Italian border. In Belarus experimental cultivation has begun since 2004. Experiments with fenugreek variety Ovari 4 were conducted about time of sowing in order to study their growth, development, and evaluation of productivity in the North-east part of Belarus and Central part of France. Reaching full ripeness of seeds the plants of fenugreek in the Central part of France requires about 94-97 days. Average seeds yield of 2011-2012 is 1259 kg/ha. Plant height is about 36,8 cm. Plants were affected by aphid and in the high moist agro-climatic conditions by powdery mildew. In North-east part of Belarus plants need 86-93 days to full ripeness. Plants of fenugreek have steam about 59 cm. The average seeds yield of 2007-2009 was about 723 kg/ha. Plants were resistant to aphid and diseases.
Abstract: In this paper, we have developed an explicit analytical
drain current model comprising surface channel potential and
threshold voltage in order to explain the advantages of the proposed
Gate Stack Double Diffusion (GSDD) MOSFET design over the
conventional MOSFET with the same geometric specifications that
allow us to use the benefits of the incorporation of the high-k layer
between the oxide layer and gate metal aspect on the immunity of the
proposed design against the self-heating effects. In order to show the
efficiency of our proposed structure, we propose the simulation of the
power chopper circuit. The use of the proposed structure to design a
power chopper circuit has showed that the (GSDD) MOSFET can
improve the working of the circuit in terms of power dissipation and
self-heating effect immunity. The results so obtained are in close
proximity with the 2D simulated results thus confirming the validity
of the proposed model.
Abstract: This study presents a hybrid neural network and Gravitational Search Algorithm (HNGSA) method to solve well known Wessinger's equation. To aim this purpose, gravitational search algorithm (GSA) technique is applied to train a multi-layer perceptron neural network, which is used as approximation solution of the Wessinger's equation. A trial solution of the differential equation is written as sum of two parts. The first part satisfies the initial/ boundary conditions and does not contain any adjustable parameters and the second part which is constructed so as not to affect the initial/boundary conditions. The second part involves adjustable parameters (the weights and biases) for a multi-layer perceptron neural network. In order to demonstrate the presented method, the obtained results of the proposed method are compared with some known numerical methods. The given results show that presented method can introduce a closer form to the analytic solution than other numerical methods. Present method can be easily extended to solve a wide range of problems.
Abstract: This paper describes a research project on Year 3 primary school students in Malaysia in their use of computer-based video game to enhance learning of multiplication facts (tables) in the Mathematics subject. This study attempts to investigate whether video games could actually contribute to positive effect on children-s learning or otherwise. In conducting this study, the researchers assume a neutral stand in the investigation as an unbiased outcome of the study would render reliable response to the impact of video games in education which would contribute to the literature of technology-based education as well as impact to the pedagogical aspect of formal education. In order to conduct the study, a subject (Mathematics) with a specific topic area in the subject (multiplication facts) is chosen. The study adopts a causal-comparative research to investigate the impact of the inclusion of a computer-based video game designed to teach multiplication facts to primary level students. Sample size is 100 students divided into two i.e., A: conventional group and B conventional group aided by video games. The conventional group (A) would be taught multiplication facts (timetables) and skills conventionally. The other group (B) underwent the same lessons but with supplementary activity: a computer-based video game on multiplication which is called Timez-Attack. Analysis of marks accrued from pre-test will be compared to post- test using comparisons of means, t tests, and ANOVA tests to investigate the impact of computer games as an added learning activity. The findings revealed that video games as a supplementary activity to classroom learning brings significant and positive effect on students- retention and mastery of multiplication tables as compared to students who rely only upon formal classroom instructions.