Abstract: Various intelligences and inspirations have been
adopted into the iterative searching process called as meta-heuristics.
They intelligently perform the exploration and exploitation in the
solution domain space aiming to efficiently seek near optimal
solutions. In this work, the bee algorithm, inspired by the natural
foraging behaviour of honey bees, was adapted to find the near
optimal solutions of the transportation management system, dynamic
multi-zone dispatching. This problem prepares for an uncertainty and
changing customers- demand. In striving to remain competitive,
transportation system should therefore be flexible in order to cope
with the changes of customers- demand in terms of in-bound and outbound
goods and technological innovations. To remain higher service
level but lower cost management via the minimal imbalance scenario,
the rearrangement penalty of the area, in each zone, including time
periods are also included. However, the performance of the algorithm
depends on the appropriate parameters- setting and need to be
determined and analysed before its implementation. BEE parameters
are determined through the linear constrained response surface
optimisation or LCRSOM and weighted centroid modified simplex
methods or WCMSM. Experimental results were analysed in terms
of best solutions found so far, mean and standard deviation on the
imbalance values including the convergence of the solutions
obtained. It was found that the results obtained from the LCRSOM
were better than those using the WCMSM. However, the average
execution time of experimental run using the LCRSOM was longer
than those using the WCMSM. Finally a recommendation of proper
level settings of BEE parameters for some selected problem sizes is
given as a guideline for future applications.
Abstract: An important goal of parboiling is a decrease of rice broken percentage and at the beginning Selected paddy of variety of rice Tarom and soaked at three different temperatures 45 Cº, 65 Cº and 80 Cº orderly for 5 hours, 4 hours and 1.5 hours to moisture of 40 % and then in steaming stage to operate these action two steaming methods are selected steaming under pressure condition and steaming in atmosphere pressure and In the first method after exerting air, the steam pressure is increase to 1 Kg/Cm2 which is done in two different duration times of 2.5 and 5 minutes and in second method used of three times of 5,10 and 15 minutes and dry to 8% moisture and decreases of rice broken percentage at best condition in variety of Tarom of 37.2 % to 7.3 % and increases yield percentage at best condition in variety of Tarom of 69.4 % to 75.93 % and bran percentage decreased in variety of Tarom of 9.53 % to 2.2-3.2 % and this issue cause increases yield percentage in rice and use of This method is very significant for our country because broken percentage of rice in our country is 23-33 %.
Abstract: Multiplication algorithms have considerable effect on
processors performance. A new high-speed, low-power
multiplication algorithm has been presented using modified Dadda
tree structure. Three important modifications have been implemented
in inner product generation step, inner product reduction step and
final addition step. Optimized algorithms have to be used into basic
computation components, such as multiplication algorithms. In this
paper, we proposed a new algorithm to reduce power, delay, and
transistor count of a multiplication algorithm implemented using low
power modified counter. This work presents a novel design for
Dadda multiplication algorithms. The proposed multiplication
algorithm includes structured parts, which have important effect on
inner product reduction tree. In this paper, a 1.3V, 64-bit carry hybrid
adder is presented for fast, low voltage applications. The new 64-bit
adder uses a new circuit to implement the proposed carry hybrid
adder. The new adder using 80 nm CMOS technology has been
implemented on 700 MHz clock frequency. The proposed
multiplication algorithm has achieved 14 percent improvement in
transistor count, 13 percent reduction in delay and 12 percent
modification in power consumption in compared with conventional
designs.
Abstract: Despite of the preponderant role played by cement among the construction materials, it is today considered as a material destructing the environment due to the large quantities of carbon dioxide exhausted during its manufacture. Besides, global warming is now recognized worldwide as the new threat to the humankind against which advanced countries are investigating measures to reduce the current amount of exhausted gases to the half by 2050. Accordingly, efforts to reduce green gases are exerted in all industrial fields. Especially, the cement industry strives to reduce the consumption of cement through the development of alkali-activated geopolymer mortars using industrial byproducts like bottom ash. This study intends to gather basic data on the flowability and strength development characteristics of alkali-activated geopolymer mortar by examining its FT-IT features with respect to the effects and strength of the alkali-activator in order to develop bottom ash-based alkali-activated geopolymer mortar. The results show that the 35:65 mass ratio of sodium hydroxide to sodium silicate is appropriate and that a molarity of 9M for sodium hydroxide is advantageous. The ratio of the alkali-activators to bottom ash is seen to have poor effect on the strength. Moreover, the FT-IR analysis reveals that larger improvement of the strength shifts the peak from 1060 cm–1 (T-O, T=Si or Al) toward shorter wavenumber.
Abstract: Because of the increasing business pressures, companies must be adaptable and flexible in order to withstand them. Inadequate business processes and low level of business process orientation, that in its core accentuates business processes as opposed to business functions and focuses on process performance and customer satisfaction, hider the ability to adapt to changing environment. It has been shown in previous studies that the companies which have reached higher business process maturity level consistently outperform those that have not reached them. The aim of this paper is to provide a basic understanding of business process orientation concept and business process maturity model. Besides that the paper presents the state of business process orientation in Croatia that has been captured with a study conducted in 2013. Based on the results some practical implications and guidelines for managers are given.
Abstract: Virtual engineering technology has undergone rapid progress in recent years and is being adopted increasingly by manufacturing companies of many engineering disciplines. There is an increasing demand from industry for qualified virtual engineers. The qualified virtual engineers should have the ability of applying engineering principles and mechanical design methods within the commercial software package environment. It is a challenge to the engineering education in universities which traditionally tends to lack the integration of knowledge and skills required for solving real world problems. In this paper, a case study shows some recent development of a MSc Mechanical Engineering course at Department of Engineering and Technology in MMU, and in particular, two units Simulation of Mechanical Systems(SMS) and Computer Aided Fatigue Analysis(CAFA) that emphasize virtual engineering education and promote integration of knowledge acquisition, skill training and industrial application.
Abstract: Thanks to VR technology advanced, there are many
researches had used VR technology to develop a training system.
Using VR characteristics can simulate many kinds of situations to
reach our training-s goal. However, a good training system not only
considers real simulation but also considers learner-s learning
motivation. So, there are many researches started to conduct game-s
features into VR training system. We typically called this is a serious
game. It is using game-s features to engage learner-s learning
motivation. However, VR or Serious game has another important
advantage. That is simulating feature. Using this feature can create
any kinds of pressured environments. Because in the real
environment may happen any emergent situations. So, increasing the
trainees- pressure is more important when they are training. Most
pervious researches are investigated serious game-s applications and
learning performance. Seldom researches investigated how to
increase the learner-s mental workload when they are training. So, in
our study, we will introduce a real case study and create two types
training environments. Comparing the learner-s mental workload
between VR training and serious game.
Abstract: Nosocomial (i.e., hospital-acquired) infections
(NI) is a major cause of morbidity and mortality in hospitals. NI
rate is higher in intensive care units (ICU) than in the general
ward due to patients with severe symptoms, poor immunity,
and accepted many invasive therapies. Contact behaviors
between health caregivers and patients is one of the infect
factors. It is difficult to obtain complete contact records by
traditional method of retrospective analysis of medical records.
This paper establishes a contact history inferential model
(CHIM) intended to extend the use of Proximity Sensing of
rapid frequency identification (RFID) technology to
transferring all proximity events between health caregivers and
patients into clinical events (close-in events, contact events and
invasive events).The results of the study indicated that the
CHIM can infer proximity care activities into close-in events
and contact events.
The infection control team could redesign and build optimal
workflow in the ICU according to the patient-specific contact
history which provided by our automatic tracing system.
Abstract: Wikis are promoted as collaborative writing tools that
allow students to transform a text into a collective document by
information sharing and group reflection. However, despite the
promising collaborative capabilities of wikis, their pedagogical value
regarding collaborative writing is still questionable. Wiki alone
cannot make collaborative writing happen, and students do not
automatically become more active, participate, and collaborate with
others when they use wikis. To foster collaborative writing and active
involvement in wiki development there is a need for a systematic
approach to wikis. Themain goal of this paper is to propose and
evaluate a co-writing approach to the development of wikis, along
with the study of three wiki applications to report on pedagogical
implications of collaborative writing in higher education.
Abstract: The issue of leadership has been investigated from
several perspectives; however, very less from ethical perspective.
With the growing number of corporate scandals and unethical roles
played by business leaders in several parts of the world, the need to
examine leadership from ethical perspective cannot be over
emphasized. The importance of leadership credibility has been
discussed in the authentic model of leadership. Authentic leaders
display high degree of integrity, have deep sense of purpose, and
committed to their core values. As a result they promote a more
trusting relationship in their work groups that translates into several
positive outcomes. The present study examined how authentic
leadership contribute to subordinates- trust in leadership and how this
trust, in turn, predicts subordinates- work engagement. A sample of
395 employees was randomly selected from several local banks
operating in Malaysia. Standardized tools such as ALQ, OTI, and
EEQ were employed. Results indicated that authentic leadership
promoted subordinates- trust in leader, and contributed to work
engagement. Also, interpersonal trust predicted employees- work
engagement as well as mediated the relationship between this style of
leadership and employees- work engagement.
Abstract: A conventional image posterization method
occasionally fails to preserve the shape and color of objects due to the
uneffective color reduction. This paper proposes a new image
posterizartion method by using modified color quantization for
preserving the shape and color of objects and color contrast
enhancement for improving lightness contrast and saturation.
Experiment results show that our proposed method can provide
visually more satisfactory posterization result than that of the
conventional method.
Abstract: The influence of physical (external added weight) and
neurophysiological (fatigue) factors on static and dynamic balance in
sport related activities was typified statically by the Romberg test
(one foot flat, eyes open) and dynamically by jumping and hopping
in both horizontal and vertical directions. Twenty healthy males were
participated in this study. In Static condition, added weight increased
body-s inertia and therefore decreased body sway in AP direction
though not significantly. Dynamically, added weight significantly
increased body sway in both ML and AP directions, indicating
instability, and the use of the counter rotating segments mechanism to
maintain balance was demonstrated. Fatigue on the other hand
significantly increased body sway during static balance as a
neurophysiological adaptation primarily to the inverted pendulum
mechanism. Dynamically, fatigue significantly increased body sway
in both ML and AP directions again indicating instability but with a
greater use of counter rotating segments mechanism. Differential
adaptations for each of the two balance mechanisms (inverted
pendulum and counter rotating segments) were found between one
foot flat and two feet flat dynamic conditions, as participants relied
more heavily on the first in the one foot flat conditions and relied
more on the second in the two feet flat conditions.
Abstract: In this article, our objective is the analysis of the resolution of non-linear differential systems by combining Newton and Continuation (N-C) method. The iterative numerical methods converge where the initial condition is chosen close to the exact solution. The question of choosing the initial condition is answered by N-C method.
Abstract: Previous researches found that conventional WBL is effective for meaningful learner, because rote learner learn by repeating without thinking or trying to understand. It is impossible to have full benefit from conventional WBL. Understanding of rote learner-s intention and what influences it becomes important. Poorly designed user interface will discourage rote learner-s cultivation and intention to use WBL. Thus, user interface design is an important factor especially when WBL is used as comprehensive replacement of conventional teaching. This research proposes the influencing factors that can enhance learner-s intention to use the system. The enhanced TAM is used for evaluating the proposed factors. The research result points out that factors influencing rote learner-s intention are Perceived Usefulness of Homepage Content Structure, Perceived User Friendly Interface, Perceived Hedonic Component, and Perceived (homepage) Visual Attractiveness.
Abstract: In this paper we present a statistical analysis of Voice
over IP (VoIP) packet streams produced by the G.711 voice coder
with voice activity detection (VAD). During telephone conversation,
depending whether the interlocutor speaks (ON) or remains silent
(OFF), packets are produced or not by a voice coder. As index of
dispersion for both ON and OFF times distribution was greater than
one, we used hyperexponential distribution for approximation of
streams duration. For each stage of the hyperexponential distribution,
we tested goodness of our fits using graphical methods, we calculated
estimation errors, and performed Kolmogorov-Smirnov test.
Obtained results showed that the precise VoIP source model can be
based on the five-state Markov process.
Abstract: This study investigated the use of modified
atmosphere packaging (MAP) and different packaging to extend the
shelf life of Barbari flat bread. Three atmospheres including 70%CO2
and 30%N2, 50% CO2 and 50%N2 and a normal air as control were
used. The bread samples were packaged in three type pouches. The
shelf life was determined by appearance of mold and yeast (M +Y) in
Barbari bread samples stored at 25 ± 1°C and 38 ± 2% relative
humidity. The results showed that it is possible to prolong the shelf
life of Barbari bread from four days to about 21 days by using
modified atmosphere packaging with high carbon dioxide
concentration and high-barrier laminated and vacuum bags packages.
However, the hardness of samples kept in MAP increase significantly
by increase of carbon dioxide concentration. The correlation
coefficient (r) between headspace CO2 concentration and hardness
was 0.997, 0.997 and 0.599 for A, B and C packaging respectively.
High negative correlation coefficients were found between the crumb
moisture and the hardness values in various packaging. There were
significant negative correlation coefficients between sensory
parameters and hardness of texture.
Abstract: In this paper, based on the work in [1], we further give
a general model for acquiring knowledge, which first focuses on the
research of how and when things involved in problems are made
then describes the goals, the energy and the time to give an optimum
model to decide how many related things are supposed to be involved
in. Finally, we acquire knowledge from this model in which there are
the attributes, actions and connections of the things involved at the
time when they are born and the time in their life. This model not
only improves AI theories, but also surely brings the effectiveness
and accuracy for AI system because systems are given more
knowledge when reasoning or computing is used to bring about
results.
Abstract: This paper presents a review on vision aided systems
and proposes an approach for visual rehabilitation using stereo vision
technology. The proposed system utilizes stereo vision, image
processing methodology and a sonification procedure to support
blind navigation. The developed system includes a wearable
computer, stereo cameras as vision sensor and stereo earphones, all
moulded in a helmet. The image of the scene infront of visually
handicapped is captured by the vision sensors. The captured images
are processed to enhance the important features in the scene in front,
for navigation assistance. The image processing is designed as model
of human vision by identifying the obstacles and their depth
information. The processed image is mapped on to musical stereo
sound for the blind-s understanding of the scene infront. The
developed method has been tested in the indoor and outdoor
environments and the proposed image processing methodology is
found to be effective for object identification.
Abstract: In this paper, we consider an iteration process for
approximating common fixed points of two asymptotically quasinonexpansive
mappings and we prove some strong and weak convergence
theorems for such mappings in uniformly convex Banach
spaces.
Abstract: The paper describes design of an ontology in the
financial domain for mutual funds. The design of this ontology
consists of four steps, namely, specification, knowledge acquisition,
implementation and semantic query. Specification includes a
description of the taxonomy and different types mutual funds and
their scope. Knowledge acquisition involves the information
extraction from heterogeneous resources. Implementation describes
the conceptualization and encoding of this data. Finally, semantic
query permits complex queries to integrated data, mapping of these
database entities to ontological concepts.