Abstract: In order to compare the performance of the carbon dioxide and HFC-125 heat pumps for medium-and high-temperature heating, both heat pump cycles were optimized using a simulation method. To fairly compare the performance of the cycles by using different working fluids, each cycle was optimized from the viewpoint of heating COP by two design parameters. The first is the gas cooler exit temperature and the other is the ratio of the overall heat conductance of the gas cooler to the combined overall heat conductance of the gas cooler and the evaporator. The inlet and outlet temperatures of secondary fluid of the gas cooler were fixed at 40/90°C and 40/150°C.The results shows that the HFC-125 heat pump has 6% higher heating COP than carbon dioxide heat pump when the heat sink exit temperature is fixed at 90ºC, while the latter outperforms the former when the heat sink exit temperature is fixed at 150ºC under the simulation conditions considered in the present study.
Abstract: The objective of this paper is to a design of pattern
classification model based on the back-propagation (BP) algorithm for
decision support system. Standard BP model has done full connection
of each node in the layers from input to output layers. Therefore, it
takes a lot of computing time and iteration computing for good
performance and less accepted error rate when we are doing some
pattern generation or training the network.
However, this model is using exclusive connection in between
hidden layer nodes and output nodes. The advantage of this model is
less number of iteration and better performance compare with standard
back-propagation model. We simulated some cases of classification
data and different setting of network factors (e.g. hidden layer number
and nodes, number of classification and iteration). During our
simulation, we found that most of simulations cases were satisfied by
BP based using exclusive connection network model compared to
standard BP. We expect that this algorithm can be available to
identification of user face, analysis of data, mapping data in between
environment data and information.
Abstract: This paper presents an adaptive feedback linearization approach to derive helicopter. Ideal feedback linearization is defined for the cases when the system model is known. Adaptive feedback linearization is employed to get asymptotically exact cancellation for the inherent uncertainty in the knowledge of the given parameters of system. The control algorithm is implemented using the feedback linearization technique and adaptive method. The controller parameters are unknown where an adaptive control law aims to drive them towards their ideal values for providing perfect model matching between the reference model and the closed-loop plant model. The converged parameters of controller would then provide good estimates for the unknown plant parameters.
Abstract: A number of competing methodologies have been developed
to identify genes and classify DNA sequences into coding
and non-coding sequences. This classification process is fundamental
in gene finding and gene annotation tools and is one of the most
challenging tasks in bioinformatics and computational biology. An
information theory measure based on mutual information has shown
good accuracy in classifying DNA sequences into coding and noncoding.
In this paper we describe a species independent iterative
approach that distinguishes coding from non-coding sequences using
the mutual information measure (MIM). A set of sixty prokaryotes is
used to extract universal training data. To facilitate comparisons with
the published results of other researchers, a test set of 51 bacterial
and archaeal genomes was used to evaluate MIM. These results
demonstrate that MIM produces superior results while remaining
species independent.
Abstract: In this paper we present a photo mosaic smartphone
application in client-server based large-scale image databases. Photo
mosaic is not a new concept, but there are very few smartphone
applications especially for a huge number of images in the
client-server environment. To support large-scale image databases,
we first propose an overall framework working as a client-server
model. We then present a concept of image-PAA features to efficiently
handle a huge number of images and discuss its lower bounding
property. We also present a best-match algorithm that exploits the
lower bounding property of image-PAA. We finally implement an
efficient Android-based application and demonstrate its feasibility.
Abstract: Tourism industries are rapidly increased for the last
few years especially in Malaysia. In order to attract more tourists,
Malaysian Governance encourages any effort to increase Malaysian
tourism industry. One of the efforts in attracting more tourists in
Malacca, Malaysia is a duck tour. Duck tour is an amphibious
sightseeing tour that works in two types of engines, hence, it required
a huge cost to operate and maintain the vehicle. To other country, it is
not so new but in Malaysia, it is just introduced, thus it does not have
any systematic routing yet. Therefore, this paper proposed an
optimization technique to formulate and schedule this tour to
minimize the operating costs by considering it into Travelling
Salesman Problem (TSP). The problem is then can be solved by one
of the optimization technique especially meta-heuristics approach
such as Tabu Search (TS) and Reactive Tabu Search (RTS).
Abstract: Next generation wireless/mobile networks will be IP based cellular networks integrating the internet with cellular networks. In this paper, we propose a new architecture for a high speed transport system and a mobile management protocol for mobile internet users in a transport system. Existing mobility management protocols (MIPv6, HMIPv6) do not consider real world fast moving wireless hosts (e.g. passengers in a train). For this reason, we define a virtual organization (VO) and proposed the VO architecture for the transport system. We also classify mobility as VO mobility (intra VO) and macro mobility (inter VO). Handoffs in VO are locally managed and transparent to the CH while macro mobility is managed with Mobile IPv6. And, from the features of the transport system, such as fixed route and steady speed, we deduce the movement route and the handoff disruption time of each handoff. To reduce packet loss during handoff disruption time, we propose pre-registration scheme using pre-registration. Moreover, the proposed protocol can eliminate unnecessary binding updates resulting from sequence movement at high speed. The performance evaluations demonstrate our proposed protocol has a good performance at transport system environment. Our proposed protocol can be applied to the usage of wireless internet on the train, subway, and high speed train.
Abstract: This paper presents anapproach of hybridizing two or more artificial intelligence (AI) techniques which arebeing used to
fuzzify the workstress level ranking and categorize the rating accordingly. The use of two or more techniques (hybrid approach)
has been considered in this case, as combining different techniques may lead to neutralizing each other-s weaknesses generating a
superior hybrid solution. Recent researches have shown that there is a
need for a more valid and reliable tools, for assessing work stress. Thus artificial intelligence techniques have been applied in this
instance to provide a solution to a psychological application. An overview about the novel and autonomous interactive model for analysing work-stress that has been developedusing multi-agent
systems is also presented in this paper. The establishment of the intelligent multi-agent decision analyser (IMADA) using hybridized technique of neural networks and fuzzy logic within the multi-agent based framework is also described.
Abstract: Ethical Education is a compulsorily optional subject in
primary and secondary schools. The Ethical Education objective is
the education of a personality with one´s own identity, with
interiorized ethical standards, with mature moral judgement and
therefore with the behaviour determined by one´s own beliefs; with a
positive attitude to himself/herself and other people and that is why
he/she is able to cooperate and to initiate cooperation. In the paper we
describe the contents and the principles of Ethical education. We also
shows that Ethical education is subject supported primary socialpathological
prevention and education to citizenship. In this context
we try to show that ethical education contributes to the education of
good people who are aware of the necessity to respect social norms
and are able to assume responsibility for their own behaviour in any
situation at present and in the future.
Abstract: Cutting tools are widely used in manufacturing processes and drilling is the most commonly used machining process. Although drill-bits used in drilling may not be expensive, their breakage can cause damage to expensive work piece being drilled and at the same time has major impact on productivity. Predicting drill-bit breakage, therefore, is important in reducing cost and improving productivity. This study uses twenty features extracted from two degradation signals viz., thrust force and torque. The methodology used involves developing and comparing decision tree, random forest, and multinomial logistic regression models for classifying and predicting drill-bit breakage using degradation signals.
Abstract: Selecting the data modeling technique for an
information system is determined by the objective of the resultant
data model. Dimensional modeling is the preferred modeling
technique for data destined for data warehouses and data mining,
presenting data models that ease analysis and queries which are in
contrast with entity relationship modeling. The establishment of data
warehouses as components of information system landscapes in
many organizations has subsequently led to the development of
dimensional modeling. This has been significantly more developed
and reported for the commercial database management systems as
compared to the open sources thereby making it less affordable for
those in resource constrained settings. This paper presents
dimensional modeling of HIV patient information using open source
modeling tools. It aims to take advantage of the fact that the most
affected regions by the HIV virus are also heavily resource
constrained (sub-Saharan Africa) whereas having large quantities of
HIV data. Two HIV data source systems were studied to identify
appropriate dimensions and facts these were then modeled using two
open source dimensional modeling tools. Use of open source would
reduce the software costs for dimensional modeling and in turn make
data warehousing and data mining more feasible even for those in
resource constrained settings but with data available.
Abstract: A simultaneous study on indoor and outdoor particulate matter concentrations was done in five elementary schools in central parts of Tehran, Iran. Three sizes of particles including PM10, PM2.5 and PM1.0 were measured in 13 classrooms within this schools during winter (January, February and March) 2009. A laserbased portable aerosol spectrometer Model Grimm-1.108, was used for the continuous measurement of particles. The average indoor concentration of PM10, PM2.5 and PM1.0 in studied schools were 274 μg/m3, 42 μg/m3 and 19 μg/m3 respectively; and average outdoor concentrations of PM10, PM2.5 and PM1.0 were evaluated to be 22 μg/m3, 38 μg/m3 and 140 μg/m3 respectively.
Abstract: Fatigue behaviors of Lead Zirconate Titanate (PZT)
ceramics under different amplitude of bipolar electrical loads have
been investigated. Fatigue behavior is represented by the change of
hysteresis loops and remnant polarization. Three levels of electrical
load amplitudes (1.00, 1.25 and 1.50 kV /mm) were applied in this
experimental. It was found that the remnant polarization decreased
significantly with the number of loading cycles. The degree of fatigue
degradation depends on the amplitude of electric field. The higher
amplitude exhibits the greater fatigue degradation.
Abstract: Recently, there are significant improvements in the
capabilities of mobile devices; rendering large terrain is tedious
because of the constraint in resources of mobile devices. This
paper focuses on the implementation of terrain rendering on
mobile device to observe some issues and current constraints
occurred. Experiments are performed using two datasets with
results based on rendering speed and appearance to ascertain both
the issues and constraints. The result shows a downfall of frame
rate performance because of the increase of triangles. Since the
resolution between computer and mobile device is different, the
terrain surface on mobile device looks more unrealistic compared
to on a computer. Thus, more attention in the development of
terrain rendering on mobile devices is required. The problems
highlighted in this paper will be the focus of future research and
will be a great importance for 3D visualization on mobile device.
Abstract: Benefits to the organisation are just as important as technical ability when it comes to software success. The challenge is to provide industry with professionals who understand this. In other words: How to teach computer engineering students to look beyond technology, and at the benefits of software to organizations? This paper reports on the conceptual design of a section of the computer networks module aimed to sensitize the students to the organisational context.
Checkland focuses on different worldviews represented by various role players in the organisation. He developed the Soft Systems Methodology that guides purposeful action in organisations, while incorporating different worldviews in the modeling process. If we can sensitize students to these methods, they are likely to appreciate the wider context of application of system software. This paper will provide literature on these concepts as well as detail on how the students will be guided to adopt these concepts.
Abstract: This study aims to conduct a preliminary investigation to determine the topic to be focused in developing Virtual Laboratory For Biology (VLab-Bio). Samples involved in answering the questionnaire are form five students (equivalent to A-Level) and biology teachers. Time and economical resources for the setting up and construction of scientific laboratories can be solved with the adaptation of virtual laboratories as an educational tool. Thus, it is hoped that the proposed virtual laboratory will help students to learn the abstract concepts in biology. Findings show that the difficult topic chosen is Cell Division and the learning objective to be focused in developing the virtual lab is “Describe the application of knowledge on mitosis in cloning".
Abstract: Bond Graph as a unified multidisciplinary tool is widely
used not only for dynamic modelling but also for Fault Detection and
Isolation because of its structural and causal proprieties. A binary
Fault Signature Matrix is systematically generated but to make the
final binary decision is not always feasible because of the problems
revealed by such method. The purpose of this paper is introducing a
methodology for the improvement of the classical binary method of
decision-making, so that the unknown and identical failure signatures
can be treated to improve the robustness. This approach consists of
associating the evaluated residuals and the components reliability data
to build a Hybrid Bayesian Network. This network is used in two
distinct inference procedures: one for the continuous part and the
other for the discrete part. The continuous nodes of the network are
the prior probabilities of the components failures, which are used by
the inference procedure on the discrete part to compute the posterior
probabilities of the failures. The developed methodology is applied
to a real steam generator pilot process.
Abstract: This paper includes two novel techniques for skew
estimation of binary document images. These algorithms are based on
connected component analysis and Hough transform. Both these
methods focus on reducing the amount of input data provided to
Hough transform. In the first method, referred as word centroid
approach, the centroids of selected words are used for skew detection.
In the second method, referred as dilate & thin approach, the selected
characters are blocked and dilated to get word blocks and later
thinning is applied. The final image fed to Hough transform has the
thinned coordinates of word blocks in the image. The methods have
been successful in reducing the computational complexity of Hough
transform based skew estimation algorithms. Promising experimental
results are also provided to prove the effectiveness of the proposed
methods.
Abstract: Legionella pneumophila is involved in more than 95%
cases of severe atypical pneumonia. Infection is mainly by
inhalation the indoor aerosols through the water-coolant systems.
Because some Legionella strains may be viable but not culturable,
therefore, Taq polymerase, DNA amplification and semi-nested-PCR
were carried out to detect Legionella-specific 16S-rDNA sequence.
For this purpose, 1.5 litter of water samples from 77 water-coolant
system were collected from four different hospitals, two nursing
homes and one student hostel in Kerman city of Iran, each in a brand
new plastic bottle during summer season of 2006 (from April to
August). The samples were filtered in the sterile condition through
the Millipore Membrane Filter. DNA was extracted from membrane
and used for PCR to detect Legionella spp. The PCR product was
then subjected to semi-nested PCR for detection of L. pneumophila.
Out of 77 water samples that were tested by PCR, 30 (39%) were
positive for most species of Legionella. However, L. pneumophila
was detected from 14 (18.2%) water samples by semi-nested PCR.
From the above results it can be concluded that water coolant
systems of different hospitals and nursing homes in Kerman city of
Iran are highly contaminated with L. pneumophila spp. and pose
serious concern. So, we recommend avoiding such type of coolant
system in the hospitals and nursing homes.
Abstract: This article presents a performance comparison of an
interior mounted permanent magnet synchronous generator (IPMSG)
with a synchronous reluctance generator (SynRG) with the same size
for a wind application. It is found that using the same geometrical
dimensions, a SynRG can convert 74 % of the power that an IPMSG
can convert, while it has 80% of the IPMSG weight. Moreover it is
found that the efficieny for the IMPSG is 99% at rated power
compared to 98.7% for the SynRG.