Abstract: The State of Rio de Janeiro, Brazil, will hold two important events in the nearby future. In 2014 it will have the final game of the Football World Cup, and in 2016 it will be holding the Olympic Games. Therefore, the public transportation system (mainly buses) is of a major concern to the Rio de Janeiro State authorities-. The main objective of this work is to compare the quality of service of the bus companies operating in the cities of ItaperunaandCampos, both cities situated in the state of Rio de Janeiro, Brazil. The outcome of thiscomparison, based on the opinion of the bus users, has shownthemdispleased with the quality of the service provided by the bus companies operating in both cities. It is urgent the need to find possible practical alternatives to minimize the consequences of the main problems detected in this work. With these practical alternatives available, we will be able to offer to the Rio de Janeiro State authorities- suggestions about possible solutions to the main problems identified in this survey, as well as the time of implantation and costs of these solutions.
Abstract: The flow field over a flat roof model building has been numerically investigated in order to determine threedimensional CFD guidelines for the calculation of the turbulent flow over a structure immersed in an atmospheric boundary layer. To this purpose, a complete validation campaign has been performed through a systematic comparison of numerical simulations with wind tunnel experimental data. Wind tunnel measurements and numerical predictions have been compared for five different vertical positions, respectively from the upstream leading edge to the downstream bottom edge of the analyzed model. Flow field characteristics in the neighborhood of the building model have been numerically investigated, allowing a quantification of the capabilities of the CFD code to predict the flow separation and the extension of the recirculation regions. The proposed calculations have allowed the development of a preliminary procedure to be used as guidance in selecting the appropriate grid configuration and corresponding turbulence model for the prediction of the flow field over a three-dimensional roof architecture dominated by flow separation.
Abstract: Principally, plants grown in soilless culture may be
attacked by the same pests and diseases as cultivated traditionally in
soil. The most destructive phytopathogens are fungi, such as
Phythium, Phytophthora and Fusarium, followed by viruses, bacteria
and nematodes. We investigated effect of carbon nanotube filters on
disease management of soilless culture. Tomato seedlings transplant
in plastic pots filled with a soilless media of vermiculite. The crop
irrigated and fertilized using a hydroponic nutrient solution. We used
carbon nanotube filters for nutrient solution disinfection. Our results
show that carbon nanotube filtration significantly reduces pathogens
on tomato plants. Fungal elimination (Fusarium oxysporum and
Pythium spp.) was usually successful at about 96 to 99.9% all over
the cultural season. It is seem that in tomato soilless culture,
nanofiltration constitutes a reliable method that allows control of the
development of diseases caused by pathogenic fungi
Abstract: Two Amphiphilic catalysts, iron (III) dodecylbenzene
sulfonate and nickel (II) dodecylbenzene sulfonate, were synthesized
and used in the catalytic aquathermolysis of heavy crude oil to reduce
its viscosity. The prepared catalysts exhibited good performance in
the aquathermolysis and the viscosity is reduced by ~ 78.9 % for
Egyptian heavy crude oil. The chemical and physical properties of
heavy oil both before and after reaction were investigated by FT-IR,
dynamic viscosity, molecular weight and SARA analysis. The results
indicated that the content of resin, asphaltene, average molecular
weight and sulfur content of heavy oil is reduced after the catalytic
aquathermolysis.
Abstract: The significance of emissions from the road transport
sector (such as air pollution, noise, etc) has grown considerably in
recent years. In Australia, 14.3% of national greenhouse gas
emissions in 2000 were the transport sector-s share which 12.9% of
net national emissions were related to a road transport alone.
Considering the growing attention to the green house gas(GHG)
emissions, this paper attempts to provide air pollution modeling
aspects of environmental consequences of the road transport by using
one of the best computer based tools including the Geographic
Information System (GIS). In other word, in this study, GIS and its
applications is explained, models which are used to model air
pollution and GHG emissions from vehicles are described and GIS is
applied in real case study that attempts to forecast GHG emission
from people who travel to work by car in 2031 in Melbourne for
analysing results as thematic maps.
Abstract: This study aimed to investigate the influence of selected antecedents, which were tourists’ satisfaction towards attractions in Bangkok, perceived value of the attractions, feelings of engagement with the attractions, acquaintance with the attractions, push factors, pull factors and motivation to seek novelty, on foreign tourist’s loyalty towards tourist attractions in Bangkok. By using multi stage sampling technique, 400 international tourists were sampled. After that, Semi Structural Equation Model was utilized in the analysis stage by LISREL. The Semi Structural Equation Model of the selected antecedents of tourist’s loyalty attractions had a correlation with the empirical data through the following statistical descriptions: Chi- square = 3.43, df = 4, P- value = 0.48893; RMSEA = 0.000; CFI = 1.00; CN = 1539.75; RMR = 0.0022; GFI = 1.00 and AGFI = 0.98. The findings indicated that all antecedents were able together to predict the loyalty of the foreign tourists who visited Bangkok at 73 percent.
Abstract: Phytases (myo-inositol hexakisphosphate
phosphohydrolases; EC 3.1.3.8) catalyze the hydrolysis of phytic acid
(myoinositol hexakisphosphate) to the mono-, di-, tri-, tetra-, and
pentaphosphates of myo-inositol and inorganic phosphate.
Therrmophilic bacteria isolated from water sampled from hot spring.
About 120 isolates of bacteria were successfully isolated form hot
spring water sample and tested for extracellular phytase producing.
After 5 passages of the screening on the PSM media, 4 isolates were
found stable in producing phytase enzyme. The 16s RDNA
sequencing for identification of bacteria using molecular technique
revealed that all isolates those positive in phytase producing are
belong to Geobacillus spp. And Anoxybacillus spp. Anoxybacillus
rupiensis UniSZA-7 were identified for their carbon source utilization
using Phenotype Microarray Plate of Biolog and found they utilize
several kind of carbon source provided.
Abstract: Performance of any continuous speech recognition system is highly dependent on performance of the acoustic models. Generally, development of the robust spoken language technology relies on the availability of large amounts of data. Common way to cope with little data for training each state of Markov models is treebased state tying. This tying method applies contextual questions to tie states. Manual procedure for question generation suffers from human errors and is time consuming. Various automatically generated questions are used to construct decision tree. There are three approaches to generate questions to construct HMMs based on decision tree. One approach is based on misrecognized phonemes, another approach basically uses feature table and the other is based on state distributions corresponding to context-independent subword units. In this paper, all these methods of automatic question generation are applied to the decision tree on FARSDAT corpus in Persian language and their results are compared with those of manually generated questions. The results show that automatically generated questions yield much better results and can replace manually generated questions in Persian language.
Abstract: Regenerative gas turbine engine cycle is presented that yields higher cycle efficiencies than simple cycle operating under the same conditions. The power output, efficiency and specific fuel consumption are simulated with respect to operating conditions. The analytical formulae about the relation to determine the thermal efficiency are derived taking into account the effected operation conditions (ambient temperature, compression ratio, regenerator effectiveness, compressor efficiency, turbine efficiency and turbine inlet temperature). Model calculations for a wide range of parameters are presented, as are comparisons with simple gas turbine cycle. The power output and thermal efficiency are found to be increasing with the regenerative effectiveness, and the compressor and turbine efficiencies. The efficiency increased with increase the compression ratio to 5, then efficiency decreased with increased compression ratio, but in simple cycle the thermal efficiency always increase with increased in compression ratio. The increased in ambient temperature caused decreased thermal efficiency, but the increased in turbine inlet temperature increase thermal efficiency.
Abstract: Although, all high school students in Japan are required to learn informatics, many of them do not learn this topic sufficiently. In response to this situation, we propose a support package for high school informatics classes. To examine what students learned and if they sufficiently understood the context of the lessons, a questionnaire survey was distributed to 186 students. We analyzed the results of the questionnaire and determined the weakest units, which were “basic computer configuration” and “memory and secondary storage”. We then developed a package for teaching these units. We propose that our package be applied in high school classrooms.
Abstract: The adverse effects of Clindamycin (Clind.) /
Ibuprofen (Ibu.) combination on liver, kidney, blood elements and the
significances of antioxidants (N-acetylcysteine and Zinc) against
these effects were evaluated. The study includes: Group I; control
n=30, Group II; patients on Clind.300mg/Ibu.400mg twice daily for a
week n=30, Group III; patients on Clind.300mg/Ibu.400mg+Nacetylcysteine
200mg twice daily for a week n=15 and Group IV;
patients on Clind.300mg/Ibu.400mg+Zinc50mg twice daily for a
week n=15. Serum malondialdehyde (MDA), alanine transferase
(ALT), aspartate transferase (AST), γ glutamyl transferase (GGT),
creatinine, blood urea nitrogen (BUN) were measured. Applying one
way ANOVA followed by Tuckey Kramer post test, Group II showed
significant increase in ALT, AST, GGT, BUN and decrease in Hb,
RBCs, platelets than Group I. Group III showed significant decrease
in ALT, AST, GGT, BUN than Group II. Moreover, Group IV
showed significant decrease in ALT, AST, GGT and increase in Hb,
RBCs, and platelets than Group II. Conclusively, Adding Zinc or Nacetylcysteine
buffer the oxidative stress and improve the therapeutic
outcome of Clindamycin/Ibuprofen combination.
Abstract: The interaction between wakes of bluff body and
airfoil have profound influences on system performance in many
industrial applications, e.g., turbo-machinery and cooling fan. The
present work investigates the effect of configuration include; airfoil-s
angle of attack, transverse and inline spacing of the models, on
frequency behavior of the cylinder-s near-wake. The experiments
carried on under subcritical flow regime, using the hot-wire
anemometry (HWA). The relationship between the Strouhal numbers
and arrangements provide an insight into the global physical
processes of wake interaction and vortex shedding.
Abstract: Developers need to evaluate software's performance to make software efficient. This paper suggests a performance evaluation system for embedded software. The suggested system consists of code analyzer, testing agents, data analyzer, and report viewer. The code analyzer inserts additional code dependent on target system into source code and compiles the source code. The testing agents execute performance test. The data analyzer translates raw-level results data to class-level APIs for reporting viewer. The report viewer offers users graphical report views by using the APIs. We hope that the suggested tool will be useful for embedded-related software development,because developers can easily and intuitively analyze software's performance and resource utilization.
Abstract: Non-stationary trend in R-R interval series is
considered as a main factor that could highly influence the evaluation
of spectral analysis. It is suggested to remove trends in order to obtain
reliable results. In this study, three detrending methods, the
smoothness prior approach, the wavelet and the empirical mode
decomposition, were compared on artificial R-R interval series with
four types of simulated trends. The Lomb-Scargle periodogram was
used for spectral analysis of R-R interval series. Results indicated that
the wavelet method showed a better overall performance than the other
two methods, and more time-saving, too. Therefore it was selected for
spectral analysis of real R-R interval series of thirty-seven healthy
subjects. Significant decreases (19.94±5.87% in the low frequency
band and 18.97±5.78% in the ratio (p
Abstract: In the paper, the energetic features of the loaded gait
are newly analyzed depending on the trunk flexion change. To
investigate the loaded gait, walking experiments are performed for five
subjects and, the ground reaction forces and kinematic data are
measured. Based on these information, we compute the impulse,
momentum and mechanical works done on the center of body mass,
through the trunk flexion change. As a result, it is shown that the trunk
flexion change does not affect the impulses and momentums during
the step-to-step transition as well. However, the direction of the
pre-collision momentum does change depending on the trunk flexion
change, which is degenerated just after (or during) the collision period.
Abstract: In this paper we propose a method for modeling the
correlation between the received signals by two or more antennas
operating in a multipath environment. Considering the maximum
excess delay in the channel being modeled, an elliptical region
surrounding both transmitter and receiver antennas is produced. A
number of scatterers are randomly distributed in this region and
scatter the incoming waves. The amplitude and phase of incoming
waves are computed and used to obtain statistical properties of the
received signals. This model has the distinguishable advantage of
being applicable for any configuration of antennas. Furthermore the
common PDF (Probability Distribution Function) of received wave
amplitudes for any pair of antennas can be calculated and used to
produce statistical parameters of received signals.
Abstract: This paper explores the opportunity of using tri-axial
wireless accelerometers for supervised monitoring of sports
movements. A motion analysis system for the upper extremities of
lawn bowlers in particular is developed. Accelerometers are placed
on parts of human body such as the chest to represent the shoulder
movements, the back to capture the trunk motion, back of the hand,
the wrist and one above the elbow, to capture arm movements. These
sensors placement are carefully designed in order to avoid restricting
bowler-s movements. Data is acquired from these sensors in soft-real
time using virtual instrumentation; the acquired data is then
conditioned and converted into required parameters for motion
regeneration. A user interface was also created to facilitate in the
acquisition of data, and broadcasting of commands to the wireless
accelerometers. All motion regeneration in this paper deals with the
motion of the human body segment in the X and Y direction, looking
into the motion of the anterior/ posterior and lateral directions
respectively.
Abstract: This paper describes the design process and the realtime validation of an innovative autonomous mid-air flight and landing system developed by the Italian Aerospace Research Center in the framework of the Italian national funded project TECVOL (Technologies for the Autonomous Flight). In the paper it is provided an insight of the whole development process of the system under study. In particular, the project framework is illustrated at first, then the functional context and the adopted design and testing approach are described, and finally the on-ground validation test rig on purpose designed is addressed in details. Furthermore, the hardwarein- the-loop validation of the autonomous mid-air flight and landing system by means of the real-time test rig is described and discussed.
Abstract: Phytases are enzymes used as an important component
in monogastric animals feeds in order to improve phosphorous
availability, since it is not readily assimilated by these animals in the
form of the phytate presented in plants and grains. As these enzymes
are used in industrial activities, they must retain its catalytic activities
during a certain storage period. This study presents information about
the stability of 4 different phytases, produced by four macromycetes
fungi through solid-state fermentation (SSF). There is a lack of data
in literature concerning phytase from macromycetes shelf-life in
storage conditions at room, cooling and freezing temperatures. The 4
phytases from macromycetes still had enzymatic activities around
100 days of storage at room temperature. At cooling temperature in
146 days of studies, the phytase from G. stipitatum was the most
stable with 44% of the initial activity, in U.gds (units per gram of
dried fermented substrate). The freezing temperature was the best
condition storage for phytases from G. stipitatum and T. versicolor.
Each condition provided a study for each mushroom phytase,
totalizing 12 studies. The phytases showed to be stable for a long
period without the addition of additives.
Abstract: Genetically modified (GM) technology in food
production continued to generate controversies. Consumers were
concerned with the GM foods about the healthy and environmental
risks. While consumers- acceptance was a critical factor affecting how
widely this technology be used. According to the research review,
consumers- lack of information was one of the reasons to explain
consumers- low acceptance toward GM foods. The objective for this
study wanted to find out would informative product package affect
consumers- behavior toward GM foods. An experiment was designed
to investigate consumer behavior toward different product package
information. The results indicated that the product package
information influenced consumer product trust toward GM foods.
Compared with the traceability production system information, the
information about the GM rice was approved by authorized
organizations could increase consumers product trust in GM foods.
Consumers in Taiwan saw the information provided by authorized
organizations more credible than other information.