Abstract: Frequency stability of microgrids under islanded
operation attracts particular attention recently. A new cooperative
frequency control strategy based on centralized multi-agent system
(CMAS) is proposed in this study. Based on this strategy, agents sent
data and furthermore each component has its own to center operating
decisions (MGCC).After deciding on the information, they are
returned. Frequency control strategies include primary and secondary
frequency control and disposal of multi-stage load in which this study
will also provide a method and algorithm for load shedding. This
could also be a big problem for the performance of micro-grid in
times of disaster. The simulation results show the promising
performance of the proposed structure of the controller based on
multi agent systems.
Abstract: The use of mobile phones is growing tremendously all
over the world. In Tanzania there are a number of operators licensed
by Tanzania Communications Regulatory Authority (TCRA) aiming
at attracting customers into their networks. So far
telecommunications market competition has been very stiff. Various
measures are being taken by mobile operators to survive in the
market. Such measure include introducing of different air time
bundles on daily, weekly and monthly at lower tariffs. Other
measures include the introduction of normal tariff, tourist package
and one network. Despite of all these strategies, there is a dynamic
competition in the market which needs to be explored. Some
influences which attract customers to choose a certain mobile
operator are of particular interest. This paper is investigating if the
network effects and Quality of Services (QoS) influence mobile
customers in selection of their mobile network operators. Seventy
seven students from high learning institutions in Dodoma
Municipality in Tanzania participated in responding to prepared
questionnaires. The data was analyzed using Statistical Package for
Social Science (SPSS) Software. The results indicate that, network
coverage does influence customers in selection of mobile operators.
In addition, this paper proposes further research in some areas
especially where the study came up with different findings from what
the theory has in place.
Abstract: Applied industrial engineering is concerned with
imparting employable skills to improve the productivity for current
situation of products and services. The purpose of this case study is to
present the results of an initial research study conducted to identify
the desired professional characteristics of an industrial engineer with
an undergraduate degree and the emerging topic areas that should be
incorporated into the curriculum to prepare industrial engineering
(IE) graduates for the future workforce. Conclusions and
recommendations for applied industrial engineering syllabus have
been gathered and reported below. A two-pronged approach was
taken which included a method of benchmarking by comparing the
applied industrial engineering curricula of various universities and an
industry survey to identify job market requirements. This
methodology produced an analysis of the changing nature of
industrial engineering from learning to practical education. A
curriculum study for engineering is a relatively unexplored area of
research in the Middle East, much less for applied industrial
engineering. This work is an effort to bridge the gap between
theoretical study in the classroom and the real world work
applications in the industrial and service sectors.
Abstract: Dissimilar joining of Titanium and Aluminum thin
sheets has potential applications in aerospace and automobile
industry which can reduce weight and cost and improve strength,
corrosion resistance and high temperature properties. However
successful welding of Titanium/Aluminium sheets is of challenge due
to differences in physical, chemical and metallurgical properties
between the two. This paper describes research results of Laser Beam
Welding (LBW) of Ti/Al thin sheets in which many researchers have
recently performed and critically reviewed from different
perspectives. Also some of notable works in the field of laser welding
with changes in mechanical properties, crack propagation, diffusion
behavior, chemical potential, interfacial reaction and the
microstructure are reported.
Abstract: Laser beam welding is an important joining technique
for Titanium/Aluminum thin sheet alloys with their increasing
applications in aerospace, aircraft, automotive, electronics and other
industries. In this paper the research and progress in laser welding of
Ti/Al thin sheets are critically reviewed from different perspectives.
Some important aspects such as microstructure, metallurgical defects
and mechanical properties in weldments are discussed. Also the
recent progress in laser welding of Ti/Al dissimilar thin sheets to
provide a basis for further research work is reported.
Abstract: Laser beam welding for the dissimilar Titanium and
Aluminium thin sheets is an emerging area which is having wider
applications in aerospace, aircraft, automotive, electronics and in
other industries due to its high speed, non-contact, precision with low
heat effects, least welding distortion, low labor costs and convenient
operation. Laser beam welding of dissimilar metal combinations are
increasingly demanded due to high energy densities with small fusion
and heat affected zones. Furthermore, no filler or electrode material is
required and contamination of weld is also very small. The present
study is to reviews the influence of different parameters like laser
power, welding speed, power density, beam diameter, focusing
distance and type of shielding gas on the mechanical properties of
dissimilar metal combinations like SS/Al, Cu/Al and Ti/Al focusing
on aluminum to other materials. Research findings reveal that Ti/Al
combination gives better metallurgical and mechanical properties
than other combinations such as SS/Al and Cu/Al.
Abstract: Artificial Immune Systems (AIS), inspired by the
human immune system, are algorithms and mechanisms which are
self-adaptive and self-learning classifiers capable of recognizing and
classifying by learning, long-term memory and association. Unlike
other human system inspired techniques like genetic algorithms and
neural networks, AIS includes a range of algorithms modeling on
different immune mechanism of the body. In this paper, a mechanism
of a human immune system based on apoptosis is adopted to build an
Intrusion Detection System (IDS) to protect computer networks.
Features are selected from network traffic using Fisher Score. Based
on the selected features, the record/connection is classified as either
an attack or normal traffic by the proposed methodology. Simulation
results demonstrates that the proposed AIS based on apoptosis
performs better than existing AIS for intrusion detection.
Abstract: Wireless sensor network is vulnerable to a wide range
of attacks. Recover secrecy after compromise, to develop technique
that can detect intrusions and able to resilient networks that isolates
the point(s) of intrusion while maintaining network connectivity for
other legitimate users. To define new security metrics to evaluate
collaborative intrusion resilience protocol, by leveraging the sensor
mobility that allows compromised sensors to recover secure state
after compromise. This is obtained with very low overhead and in a
fully distributed fashion using extensive simulations support our
findings.
Abstract: In today’s era, it is no news that organizations should
demonstrate honest conduct as well as ethical administration.
Therefore, the concept of corporate social responsibility
(subsequently CSR) has created its tag upon the company’s focal
point as well as marketing communications, and will continue in the
future. The importance of CSR has increased in the last decade, and
this concept has attracted global attention. The notion of CSR has
strategic significance for many organizations. However, businesses
are not adapting the activities of CSR that benefit to all of its
stakeholders (including society). The main reason is the practitioners
are unfortunately unable to comprehend its importance; and
therefore, the activities of the CSR are so detached from the business
activities. Hence, it is required to develop an understanding that the
activities of CSR are not only beneficial for the society but it also
benefit to business. This paper focuses on the concept of strategic
CSR, and develops a theoretical framework that will help
practitioners to filter and chose the activities of CSR that are strategic
in nature.
Abstract: We have experimentally demonstrated bright-dark
pulses in a nonlinear polarization rotation (NPR) based mode-locked
Erbium-doped fiber laser (EDFL) with a long cavity configuration.
Bright–dark pulses could be achieved when the laser works in the
passively mode-locking regime and the net group velocity dispersion
is quite anomalous. The EDFL starts to generate a bright pulse train
with degenerated dark pulse at the mode-locking threshold pump
power of 35.09 mW by manipulating the polarization states of the
laser oscillation modes using a polarization controller (PC). A split
bright–dark pulse is generated when further increasing the pump
power up to 37.95 mW. Stable bright pulses with no obvious
evidence of a dark pulse can also be generated when further adjusting
PC and increasing the pump power up to 52.19 mW. At higher pump
power of 54.96 mW, a new form of bright-dark pulse emission was
successfully identified with the repetition rate of 29 kHz. The bright
and dark pulses have a duration of 795.5 ns and 640 ns, respectively.
Abstract: In this paper, the influence of upstream structures on the flow patternaround and inside the wind-catcher is experimentally investigated by smoke flow visualization techniques. Wind-catchers are an important part of natural ventilation in residential buildings or public places such as shopping centers, libraries, etc. Wind-catchers might be also used in places of high urban densities; hence their potential to provide natural ventilation is dependent on the presence of upstream structures. In this study, the two-sided wind-catcher model was based on a real wind-catcher observed in the city of Yazd, Iran. The present study focuses on the flow patterns around and inside the isolated two-sided wind-catcher, and on a two-sided wind-catcher in the presence of an upstream structure. The results show that the presence of an upstream structure influences the airflow pattern force and direction. Placing a high upstream structure reverses the airflow direction inside the wind-catcher.
Abstract: Domestic goats (Capra hircus) are extremely diverse
species and principal animal genetic resource of the developing
world. These facilitate a persistent supply of meat, milk, fibre, and
skin and are considered as important revenue generators in small
pastoral environments. This study aimed to fingerprint β-LG gene at
PCR-RFLP level in native Saudi goat breeds (Ardi, Habsi and Harri)
in an attempt to have a preliminary image of β-LG genotypic patterns
in Saudi breeds as compared to other foreign breeds such as Indian
and Egyptian. Also, the Phylogenetic analysis was done to investigate
evolutionary trends and similarities among the caprine β-LG gene
with that of the other domestic specie, viz. cow, buffalo and sheep.
Blood samples were collected from 300 animals (100 for each breed)
and genomic DNA was extracted. A fragment of the β-LG gene
(427bp) was amplified using specific primers. Subsequent digestion
with Sac II restriction endonuclease revealed two alleles (A and B)
and three different banding patterns or genotypes i.e. AA, AB and
BB. The statistical analysis showed a general trend that β-LG AA
genotype had higher milk yield than β-LG AB and β-LG BB
genotypes. Nucleotide sequencing of the selected β-LG fragments
was done and submitted to GenBank NCBI (Accession No.
KJ544248, KJ588275, KJ588276, KJ783455, KJ783456 and
KJ874959). Phylogenetic analysis on the basis of nucleotide
sequences of native Saudi goats indicated evolutional similarity with
the GenBank reference sequences of goat, Bubalus bubalis and Bos
taurus. However, the origin of sheep which is the most closely
related from the evolutionary point of view, was located some
distance away.
Abstract: The hydrogenated amorphous carbon films (α-C:H)
were deposited on p-type Si (100) substrates at different thicknesses by
radio frequency plasma enhanced chemical vapor deposition
technique (rf-PECVD). Raman spectra display asymmetric
diamond-like carbon (DLC) peaks, representative of the α-C:H films.
The decrease of intensity ID/IG ratios revealed the sp3 content arise at
different thicknesses of the α-C:H films. In terms of mechanical
properties, the high hardness and elastic modulus values showed the
elastic and plastic deformation behaviors related to sp3 content in
amorphous carbon films. Electrochemical properties showed that the
α-C:H films exhibited excellent corrosion resistance in air-saturated
3.5 wt.% NaCl solution for pH 2 at room temperature. Thickness
increasing affected the small sp2 clusters in matrix, restricting the
velocity transfer and exchange of electrons. The deposited α-C:H films
exhibited excellent mechanical properties and corrosion resistance.
Abstract: From a perspective of moral education, this study has
examined the experiences of a group of college students who
volunteered in disaster areas after the magnitude 9.0 Earthquake,
which struck the Northeastern region of Japan in March, 2011. The
research, utilizing the method of grounded theory, has uncovered that
most of the students have gone through positive changes in their
development of moral and social characters, such as attaining deeper
sense of empathy and caring personalities. The study expresses, in
identifying the nature of those transformations, that the importance of
volunteer work should strongly be recognized by the colleges and
universities in Japan, in fulfilling their public responsibility of creating
and building learning communities that are responsible and caring.
Abstract: Many studies have revealed the fact of the complexity
of ontology building process. Therefore there is a need for a new
approach which one of that addresses the socio-technical aspects in the
collaboration to reach a consensus. Meta-design approach is
considered applicable as a method in the methodological model of
socio-technical ontology engineering. Principles in the meta-design
framework are applied in the construction phases of the ontology. A
web portal is developed to support the meta-design principles
requirements. To validate the methodological model semantic web
applications were developed and integrated in the portal and also used
as a way to show the usefulness of the ontology. The knowledge based
system will be filled with data of Indonesian medicinal plants. By
showing the usefulness of the developed ontology in a semantic web
application, we motivate all stakeholders to participate in the
development of knowledge based system of medicinal plants in
Indonesia.
Abstract: This work is focused on the study of valuation of
recycled concrete aggregates, by measuring certain properties of
concrete in the fresh and hardened state. In this study, rheological
tests and physic-mechanical characterization on concretes and
mortars were conducted with recycled concrete whose geometric
properties were identified aggregates. Mortars were elaborated with
recycled fine aggregate (0/5mm) and concretes were manufactured
using recycled coarse aggregates (5/12.5 mm and 12.5/20 mm). First,
a study of the mortars was conducted to determine the effectiveness
of polycarboxylate superplasticizer on the workability of these and
their action deflocculating of the recycled sand. The rheological
behavior of mortars based on fine aggregate recycled was
characterized. The results confirm that the mortars composed of
different fractions of recycled sand (0 /5) have a better mechanical
properties (compressive and flexural strength) compared to normal
mortar. Also, the mechanical strengths of concretes made with
recycled aggregates (5/12.5 mm and 12.5/20 mm), are comparable to
those of conventional concrete with conventional aggregates,
provided that the implementation can be improved by the addition of
a superplasticizer.
Abstract: This review summarizes the potential of starch
agroindustrial residues as substrate for biohydrogen production.
Types of potential starch agroindustrial residues, recent developments
and bio-processing conditions for biohydrogen production will be
discussed. Biohydrogen is a clean energy source with great potential
to be an alternative fuel, because it releases energy explosively in
heat engines or generates electricity in fuel cells producing water as
only by-product. Anaerobic hydrogen fermentation or dark
fermentation seems to be more favorable, since hydrogen is yielded
at high rates and various organic waste enriched with carbohydrates
as substrate result in low cost for hydrogen production. Abundant
biomass from various industries could be source for biohydrogen
production where combination of waste treatment and energy
production would be an advantage. Carbohydrate-rich nitrogendeficient
solid wastes such as starch residues can be used for
hydrogen production by using suitable bioprocess technologies.
Alternatively, converting biomass into gaseous fuels, such as
biohydrogen is possibly the most efficient way to use these
agroindustrial residues.
Abstract: To elucidate the material characteristics of single
crystals of pure aluminum and copper, the respective relations between
crystallographic orientations and microstructures were examined,
along with bending and mechanical properties. The texture
distribution was also analysed. Bending tests were performed in a
SEM apparatus while its behaviors were observed. Some analytical
results related to crystal direction maps, inverse pole figures, and
textures were obtained from electron backscatter diffraction (EBSD)
analyses.
Abstract: This paper reveals the interaction between hydrogen
and surface stress in austenitic stainless steel by X-ray diffraction
stress measurement and thermal desorption analysis before and after
being charged with hydrogen. The surface residual stress was varied
by surface finishing using several disc polishing agents. The obtained
results show that the residual stress near surface had a significant
effect on hydrogen absorption behavior, that is, tensile residual stress
promoted the hydrogen absorption and compressive one did opposite.
Also, hydrogen induced equi-biaxial stress and this stress has a linear
correlation with hydrogen content.
Abstract: In recent decades with the development of technology
and lack of food sources, sewage sludge in production of human
foods is inevitable. Various sources of municipal and industrial
sewage sludge that is produced can provide the requirement of plant
nutrients. Soils in arid, semi-arid climate of central Iran that most
affected by water drainage, iron and zinc deficiencies, using of
sewage sludge is helpful. Therefore, the aim of this study is
investigation of sewage sludge and manure application on Ni, Pb and
Cd uptake by Savory. An experiment in a randomized complete block
design with three replications was performed. Sewage sludge
treatments consisted of four levels, control, 15, 30, 80 tons per
hectares; the manure was used in four levels of control, 20, 40 and 80
tons per hectare. Results showed that the wet and dry weights was not
affected by sewage sludge using, while, manure has significant effect
on them. The effect of sewage sludge on the cadmium and lead
concentrations were significant. Interactions of sewage sludge and
manure on dry weight values were not significant. Compare mean
analysis showed that increasing the amount of sewage sludge had no
significant effect on cadmium concentration and it reduced when
sewage sludge usage increased. This is probably due to increased
plant growth and reduced concentrations of these elements in the
plant.