Abstract: When the results of the total element concentrations using USEPA method 3051A are compared to the sequential extraction analyses (i.e. the sum of fractions BCR1, BCR2 and BRC3), it can be calculated that the recovery values of elements varied between 56.8-% and 69.4-% in the bottom ash, and between 11.3-% and 70.9-% in the fly ash. This indicates that most of the elements in the ashes do not occur as readily soluble forms.
Abstract: The present paper deals with the analysis and development of noise-reduction transformer that has a filter function for conductive noise transmission. Two types of prototype noise-reduction transformers with two different output voltages are proposed. To determine an optimum design for the noise-reduction transformer, noise attenuation characteristics are discussed based on the experiments and the equivalent circuit analysis. The analysis gives a relation between the circuit parameters and the noise attenuation. High performance step-down noise-reduction transformer for direct power supply to electronics equipment is developed. The input voltage of the transformer is 100 V and the output voltage is 5 V. Frequency characteristics of noise attenuation are discussed, and prevention of pulse noise transmission is demonstrated. Normal mode noise attenuation of this transformer is –80 dB, and common mode exceeds –90 dB. The step-down noise-reduction transformer eliminates pulse noise efficiently.
Abstract: Implicit equations play a crucial role in Engineering.
Based on this importance, several techniques have been applied to
solve this particular class of equations. When it comes to practical
applications, in general, iterative procedures are taken into account.
On the other hand, with the improvement of computers, other
numerical methods have been developed to provide a more
straightforward methodology of solution. Analytical exact approaches
seem to have been continuously neglected due to the difficulty
inherent in their application; notwithstanding, they are indispensable
to validate numerical routines. Lagrange-s Inversion Theorem is a
simple mathematical tool which has proved to be widely applicable to
engineering problems. In short, it provides the solution to implicit
equations by means of an infinite series. To show the validity of this
method, the tree-parameter infiltration equation is, for the first time,
analytically and exactly solved. After manipulating these series,
closed-form solutions are presented as H-functions.
Abstract: This paper presents the vibrations suppression of a thermoelastic beam subject to sudden heat input by a distributed piezoelectric actuators. An optimization problem is formulated as the minimization of a quadratic functional in terms of displacement and velocity at a given time and with the least control effort. The solution method is based on a combination of modal expansion and variational approaches. The modal expansion approach is used to convert the optimal control of distributed parameter system into the optimal control of lumped parameter system. By utilizing the variational approach, an explicit optimal control law is derived and the determination of the corresponding displacement and velocity is reduced to solving a set of ordinary differential equations.
Abstract: The most planted cover crops in the Czech Republic
are mustard (Sinapis alba) and phacelia (Phacelia tanacetifolia
Benth.). A field trial was executed to evaluate root system size (RSS)
in eight varieties of mustard and five varieties of phacelia on two
locations, in three BBCH phases and in two years. The relationship
between RSS and aboveground biomass was inquired. The root
system was assessed by measuring its electric capacity. Aboveground
mass and root samples to be evaluated by means of a digital image
analysis were recovered in the BBCH phase 70. The yield of
aboveground biomass of mustard was always statistically
significantly higher than that of phacelia. Mustard showed a
statistically significant negative correlation between root length
density (RLD) within 10 cm and aboveground biomass weight (r = -
0.46*). Phacelia featured a statistically significant correlation
between aboveground biomass production and nitrate nitrogen
content in soil (r=0.782**).
Abstract: Facial recognition and expression analysis is rapidly
becoming an area of intense interest in computer science and humancomputer
interaction design communities. The most expressive way
humans display emotions is through facial expressions. In this paper
skin and non-skin pixels were separated. Face regions were extracted
from the detected skin regions. Facial expressions are analyzed from
facial images by applying Gabor wavelet transform (GWT) and
Discrete Cosine Transform (DCT) on face images. Radial Basis
Function (RBF) Network is used to identify the person and to classify
the facial expressions. Our method reliably works even with faces,
which carry heavy expressions.
Abstract: In this paper we study the boundedness properties of
certain oscillatory integrals with polynomial phase. We obtain sharp
estimates for these oscillatory integrals. By the virtue of these
estimates and extrapolation we obtain Lp boundedness for these
oscillatory integrals under rather weak size conditions on the kernel
function.
Abstract: Computer aided design accounts with the support of
parametric software in the design of machine components as well as
of any other pieces of interest. The complexities of the element under
study sometimes offer certain difficulties to computer design, or ever
might generate mistakes in the final body conception. Reverse
engineering techniques are based on the transformation of already
conceived body images into a matrix of points which can be
visualized by the design software. The literature exhibits several
techniques to obtain machine components dimensional fields, as
contact instrument (MMC), calipers and optical methods as laser
scanner, holograms as well as moiré methods. The objective of this
research work was to analyze the moiré technique as instrument of
reverse engineering, applied to bodies of nom complex geometry as
simple solid figures, creating matrices of points. These matrices were
forwarded to a parametric software named SolidWorks to generate
the virtual object. Volume data obtained by mechanical means, i.e.,
by caliper, the volume obtained through the moiré method and the
volume generated by the SolidWorks software were compared and
found to be in close agreement. This research work suggests the
application of phase shifting moiré methods as instrument of reverse
engineering, serving also to support farm machinery element designs.
Abstract: On-board Error Detection and Correction (EDAC)
devices aim to secure data transmitted between the central
processing unit (CPU) of a satellite onboard computer and its local
memory. This paper presents a comparison of the performance of
four low complexity EDAC techniques for application in Random
Access Memories (RAMs) on-board small satellites. The
performance of a newly proposed EDAC architecture is measured
and compared with three different EDAC strategies, using the same
FPGA technology. A statistical analysis of single-event upset (SEU)
and multiple-bit upset (MBU) activity in commercial memories
onboard Alsat-1 is given for a period of 8 years
Abstract: The paper reports on the results of experimental and
numerical study of nonstationary swirling flow in an isothermal
model of vortex burner. It has been identified that main source of the
instability is related to a precessing vortex core (PVC) phenomenon.
The PVC induced flow pulsation characteristics such as precession
frequency and its variation as a function of flowrate and swirl number
have been explored making use of acoustic probes. Additionally
pressure transducers were used to measure the pressure drops on the
working chamber and across the vortex flow. The experiments have
been included also the mean velocity measurements making use of a
laser-Doppler anemometry. The features of instantaneous flowfield
generated by the PVC were analyzed employing a commercial CFD
code (Star-CCM+) based on Detached Eddy Simulation (DES)
approach. Validity of the numerical code has been checked by
comparison calculated flowfield data with the obtained experimental
results. It has been confirmed particularly that the CFD code applied
correctly reproduces the flow features.
Abstract: Travelling salesman problem (TSP) is a combinational
optimization problem and solution approaches have been applied
many real world problems. Pure TSP assumes the cities to visit are
fixed in time and thus solutions are created to find shortest path
according to these point. But some of the points are canceled to visit
in time. If the problem is not time crucial it is not important to
determine new routing plan but if the points are changing rapidly and
time is necessary do decide a new route plan a new approach should
be applied in such cases. We developed a route plan transfer method
based on transfer learning and we achieved high performance against
determining a new model from scratch in every change.
Abstract: Flat double-layer grid is from category of space structures that are formed from two flat layers connected together with diagonal members. Increased stiffness and better seismic resistance in relation to other space structures are advantages of flat double layer space structures. The objective of this study is assessment and calculation of Behavior factor of flat double layer space structures. With regarding that these structures are used widely but Behavior factor used to design these structures against seismic force is not determined and exact, the necessity of study is obvious. This study is theoretical. In this study we used structures with span length of 16m and 20 m. All connections are pivotal. ANSYS software is used to non-linear analysis of structures.
Abstract: S-boxes (Substitution boxes) are keystones of modern
symmetric cryptosystems (block ciphers, as well as stream ciphers).
S-boxes bring nonlinearity to cryptosystems and strengthen their
cryptographic security. They are used for confusion in data security
An S-box satisfies the strict avalanche criterion (SAC), if and only if
for any single input bit of the S-box, the inversion of it changes each
output bit with probability one half. If a function (cryptographic
transformation) is complete, then each output bit depends on all of
the input bits. Thus, if it were possible to find the simplest Boolean
expression for each output bit in terms of the input bits, each of these
expressions would have to contain all of the input bits if the function
is complete. From some important properties of S-box, the most
interesting property SAC (Strict Avalanche Criterion) is presented
and to analyze this property three analysis methods are proposed.
Abstract: The X-ray technology has been used in non-destructive evaluation in the Power System, in which a visual non-destructive inspection method for the electrical equipment is provided. However, lots of noise is existed in the images that are got from the X-ray digital images equipment. Therefore, the auto defect detection which based on these images will be very difficult to proceed. A theory on X-ray image de-noising algorithm based on wavelet transform is proposed in this paper. Then the edge detection algorithm is used so that the defect can be pushed out. The result of experiment shows that the method which utilized by this paper is very useful for de-noising on the X-ray images.
Abstract: Numerical analysis naturally finds applications in all
fields of engineering and the physical sciences, but in the
21st century, the life sciences and even the arts have adopted
elements of scientific computations. The numerical data analysis
became key process in research and development of all the fields [6].
In this paper we have made an attempt to analyze the specified
numerical patterns with reference to the association rule mining
techniques with minimum confidence and minimum support mining
criteria. The extracted rules and analyzed results are graphically
demonstrated. Association rules are a simple but very useful form of
data mining that describe the probabilistic co-occurrence of certain
events within a database [7]. They were originally designed to
analyze market-basket data, in which the likelihood of items being
purchased together within the same transactions are analyzed.
Abstract: It is hard to express emotion through only speech when
we watch a character in a movie or a play because we cannot estimate
the size, kind, and quantity of emotion. So this paper proposes an
artificial emotion model for visualizing current emotion with color and
location in emotion model. The artificial emotion model is designed
considering causality of generated emotion, difference of personality,
difference of continual emotional stimulus, and co-relation of various
emotions. This paper supposed the Emotion Field for visualizing
current emotion with location, and current emotion is expressed by
location and color in the Emotion Field. For visualizing changes
within current emotion, the artificial emotion model is adjusted to
characters in Hamlet.
Abstract: Based on the component approach, three kinds of
dynamic load models, including a single –motor model, a two-motor
model and composite load model have been developed for the
stability studies of Khuzestan power system. The study results are
presented in this paper. Voltage instability is a dynamic phenomenon
and therefore requires dynamic representation of the power system
components. Industrial loads contain a large fraction of induction
machines. Several models of different complexity are available for
the description investigations. This study evaluates the dynamic
performances of several dynamic load models in combination with
the dynamics of a load changing transformer. Case study is steel
industrial substation in Khuzestan power systems.
Abstract: Effectiveness of Artificial Neural Networks (ANN)
and Support Vector Machines (SVM) classifiers for fault diagnosis of
rolling element bearings are presented in this paper. The
characteristic features of vibration signals of rotating driveline that
was run in its normal condition and with faults introduced were used
as input to ANN and SVM classifiers. Simple statistical features such
as standard deviation, skewness, kurtosis etc. of the time-domain
vibration signal segments along with peaks of the signal and peak of
power spectral density (PSD) are used as features to input the ANN
and SVM classifier. The effect of preprocessing of the vibration
signal by Discreet Wavelet Transform (DWT) prior to feature
extraction is also studied. It is shown from the experimental results
that the performance of SVM classifier in identification of bearing
condition is better then ANN and pre-processing of vibration signal
by DWT enhances the effectiveness of both ANN and SVM classifier
Abstract: The electromagnetic spectrum is a natural resource
and hence well-organized usage of the limited natural resources is the
necessities for better communication. The present static frequency
allocation schemes cannot accommodate demands of the rapidly
increasing number of higher data rate services. Therefore, dynamic
usage of the spectrum must be distinguished from the static usage to
increase the availability of frequency spectrum. Cognitive radio is not
a single piece of apparatus but it is a technology that can incorporate
components spread across a network. It offers great promise for
improving system efficiency, spectrum utilization, more effective
applications, reduction in interference and reduced complexity of
usage for users. Cognitive radio is aware of its environmental,
internal state, and location, and autonomously adjusts its operations
to achieve designed objectives. It first senses its spectral environment
over a wide frequency band, and then adapts the parameters to
maximize spectrum efficiency with high performance. This paper
only focuses on the analysis of Bit-Error-Rate in cognitive radio by
using Particle Swarm Optimization Algorithm. It is theoretically as
well as practically analyzed and interpreted in the sense of
advantages and drawbacks and how BER affects the efficiency and
performance of the communication system.
Abstract: Although considerable amount of research has attested to the link between work-to-family conflict (WFC) and family-to-work conflict (FWC) and psychological strain and wellbeing, there is a paucity of research investigating the phenomenon in the context of social workers. Moreover, very little is known about the impact of WFC and FWC in developing countries. The present study investigated the mediating effect of psychological strain on the relationship between WFC and FWC with wellbeing of social workers in India. Our findings show that WFC and FWC are influential antecedents of wellbeing; their influence is both direct on psychological strain, and indirect on wellbeing transmitted through psychological strain. Implications of the findings are discussed.