Abstract: This paper describes the design of new method of
propagation delay measurement in micro and nanostructures during
characterization of ASIC standard library cell. Providing more
accuracy timing information about library cell to the design team we
can improve a quality of timing analysis inside of ASIC design flow
process. Also, this information could be very useful for semiconductor
foundry team to make correction in technology process. By
comparison of the propagation delay in the CMOS element and result
of analog SPICE simulation. It was implemented as digital IP core for
semiconductor manufacturing process. Specialized method helps to
observe the propagation time delay in one element of the standard-cell
library with up-to picoseconds accuracy and less. Thus, the special
useful solutions for VLSI schematic to parameters extraction, basic
cell layout verification, design simulation and verification are
announced.
Abstract: Keys to high-quality face-to-face education are ensuring flexibility in the way lectures are given, and providing care and responsiveness to learners. This paper describes a face-to-face education support system that is designed to raise the satisfaction of learners and reduce the workload on instructors. This system consists of a lecture adaptation assistance part, which assists instructors in adapting teaching content and strategy, and a Q&A assistance part, which provides learners with answers to their questions. The core component of the former part is a “learning achievement map", which is composed of a Bayesian network (BN). From learners- performance in exercises on relevant past lectures, the lecture adaptation assistance part obtains information required to adapt appropriately the presentation of the next lecture. The core component of the Q&A assistance part is a case base, which accumulates cases consisting of questions expected from learners and answers to them. The Q&A assistance part is a case-based search system equipped with a search index which performs probabilistic inference. A prototype face-to-face education support system has been built, which is intended for the teaching of Java programming, and this approach was evaluated using this system. The expected degree of understanding of each learner for a future lecture was derived from his or her performance in exercises on past lectures, and this expected degree of understanding was used to select one of three adaptation levels. A model for determining the adaptation level most suitable for the individual learner has been identified. An experimental case base was built to examine the search performance of the Q&A assistance part, and it was found that the rate of successfully finding an appropriate case was 56%.
Abstract: Web-based systems have become increasingly
important due to the fact that the Internet and the World Wide Web
have become ubiquitous, surpassing all other technological
developments in our history. The Internet and especially companies
websites has rapidly evolved in their scope and extent of use, from
being a little more than fixed advertising material, i.e. a "web
presences", which had no particular influence for the company's
business, to being one of the most essential parts of the company's
core business.
Traditional software engineering approaches with process models
such as, for example, CMM and Waterfall models, do not work very
well since web system development differs from traditional
development. The development differs in several ways, for example,
there is a large gap between traditional software engineering designs
and concepts and the low-level implementation model, many of the
web based system development activities are business oriented (for
example web application are sales-oriented, web application and
intranets are content-oriented) and not engineering-oriented.
This paper aims to introduce Increment Iterative extreme
Programming (IIXP) methodology for developing web based
systems. In difference to the other existence methodologies, this
methodology is combination of different traditional and modern
software engineering and web engineering principles.
Abstract: The paper presents an on-line recognition machine
(RM) for continuous/isolated, dynamic and static gestures that arise
in Flight Deck Officer (FDO) training. RM is based on generic pattern
recognition framework. Gestures are represented as templates using
summary statistics. The proposed recognition algorithm exploits temporal
and spatial characteristics of gestures via dynamic programming
and Markovian process. The algorithm predicts corresponding index
of incremental input data in the templates in an on-line mode.
Accumulated consistency in the sequence of prediction provides a
similarity measurement (Score) between input data and the templates.
The algorithm provides an intuitive mechanism for automatic detection
of start/end frames of continuous gestures. In the present paper,
we consider isolated gestures. The performance of RM is evaluated
using four datasets - artificial (W TTest), hand motion (Yang) and
FDO (tracker, vision-based ). RM achieves comparable results which
are in agreement with other on-line and off-line algorithms such as
hidden Markov model (HMM) and dynamic time warping (DTW).
The proposed algorithm has the additional advantage of providing
timely feedback for training purposes.
Abstract: Building condition assessment is a critical activity in Malaysia-s Comprehensive Asset Management Model. It is closely related to building performance that impact user-s life and decision making. This study focuses on public primary school, one of the most valuable assets for the country. The assessment was carried out based on CSP1 Matrix in Kuching Division of Sarawak, Malaysia. Based on the matrix used, three main criteria of the buildings has successfully evaluate: the number of defects; schools rating; and total schools rating. The analysis carried out on 24 schools found that the overall 4, 725 defects has been identified. Meanwhile, the overall score obtained was 45, 868 and the overall rating is 9.71, which is at the fair condition. This result has been associated with building age to evaluate its impacts on school buildings condition. The findings proved that building condition is closely related to building age and its support the theory that 'the ageing building has more defect than the new one'.
Abstract: Schools today face ever-increasing demands in their attempts to ensure that students are well equipped to enter the workforce and navigate a complex world. Research indicates that computer technology can help support learning, implementation of various experiments or learning games, and that it is especially useful in developing the higher-order skills of critical thinking, observation, comprehension, implementation, comparison, analysis and active attention to activities such as research, field work, simulations and scientific inquiry. The ICT in education supports the learning procedure by enabling it to be more flexible and effective, create a rich and attractive training environment and equip the students with knowledge and potential useful for the competitive social environment in which they live. This paper presents the design, the development, and the results of the evaluation analysis of an interactive educational game which using real electric vehicles - toys (material) on a toy race track. When the game starts each student selects a specific vehicle toy. Then students are answering questionnaires in the computer. The vehicles' speed is related to the percentage of right answers in a multiple choice questionnaire (software). Every question has its own significant value depending of the different level of questionnaire. Via the developed software, each right or wrong answers in questionnaire increase or decrease the real time speed of their vehicle toys. Moreover the rate of vehicle's speed increase or decrease depends on the difficulty level of each question. The aim of the work is to attract the student’s interest in a learning process and also to improve their scores. The developed real time game was tested using independent populations of students of age groups: 8-10, 11-14, 15-18 years. Standard educational and statistical analysis tools were used for the evaluation analysis of the game. Results reveal that students using the developed real time control game scored much higher (60%) than students using a traditional simulation game on the same questionnaire. Results further indicate that student's interest in repeating the developed real time control gaming was far higher (70%) than the interest of students using a traditional simulation game.
Abstract: A new approach to predict the 3D structures of proteins by combining the knowledge-based method and Molecular Dynamics Simulation is presented on the chicken villin headpiece subdomain (HP-36). Comparative modeling is employed as the knowledge-based method to predict the core region (Ala9-Asn28) of the protein while the remaining residues are built as extended regions (Met1-Lys8; Leu29-Phe36) which then further refined using Molecular Dynamics Simulation for 120 ns. Since the core region is built based on a high sequence identity to the template (65%) resulting in RMSD of 1.39 Å from the native, it is believed that this well-developed core region can act as a 'nucleation center' for subsequent rapid downhill folding. Results also demonstrate that the formation of the non-native contact which tends to hamper folding rate can be avoided. The best 3D model that exhibits most of the native characteristics is identified using clustering method which then further ranked based on the conformational free energies. It is found that the backbone RMSD of the best model compared to the NMR-MDavg is 1.01 Å and 3.53 Å, for the core region and the complete protein, respectively. In addition to this, the conformational free energy of the best model is lower by 5.85 kcal/mol as compared to the NMR-MDavg. This structure prediction protocol is shown to be effective in predicting the 3D structure of small globular protein with a considerable accuracy in much shorter time compared to the conventional Molecular Dynamics simulation alone.
Abstract: Advances in processors architecture, such as multicore,
increase the size of complexity of parallel computer systems.
With multi-core architecture there are different parallel languages
that can be used to run parallel programs. One of these languages is
OpenMP which embedded in C/Cµ or FORTRAN. Because of this
new architecture and the complexity, it is very important to evaluate
the performance of OpenMP constructs, kernels, and application
program on multi-core systems. Performance is the activity of
collecting the information about the execution characteristics of a
program. Performance tools consists of at least three interfacing
software layers, including instrumentation, measurement, and
analysis. The instrumentation layer defines the measured
performance events. The measurement layer determines what
performance event is actually captured and how it is measured by the
tool. The analysis layer processes the performance data and
summarizes it into a form that can be displayed in performance tools.
In this paper, a number of OpenMP performance tools are surveyed,
explaining how each is used to collect, analyse, and display data
collection.
Abstract: In today-s world, the efficient utilization of wood
resources comes more and more to the mind of forest owners. It is a
very complex challenge to ensure an efficient harvest of the wood
resources. This is one of the scopes the project “Virtual Forest II"
addresses. Its core is a database with data about forests containing
approximately 260 million trees located in North Rhine-Westphalia
(NRW). Based on this data, tree growth simulations and wood
mobilization simulations can be conducted. This paper focuses on the
latter. It describes a discrete-event-simulation with an attached 3-D
real time visualization which simulates timber harvest using trees
from the database with different crop resources. This simulation can
be displayed in 3-D to show the progress of the wood crop. All the
data gathered during the simulation is presented as a detailed
summary afterwards. This summary includes cost-benefit
calculations and can be compared to those of previous runs to
optimize the financial outcome of the timber harvest by exchanging
crop resources or modifying their parameters.
Abstract: HIV-1 genome is highly heterogeneous. Due to this
variation, features of HIV-I genome is in a wide range. For this
reason, the ability to infection of the virus changes depending on
different chemokine receptors. From this point of view, R5 HIV
viruses use CCR5 coreceptor while X4 viruses use CXCR5 and
R5X4 viruses can utilize both coreceptors. Recently, in
Bioinformatics, R5X4 viruses have been studied to classify by using
the experiments on HIV-1 genome.
In this study, R5X4 type of HIV viruses were classified using
Auto Regressive (AR) model through Artificial Neural Networks
(ANNs). The statistical data of R5X4, R5 and X4 viruses was
analyzed by using signal processing methods and ANNs. Accessible
residues of these virus sequences were obtained and modeled by AR
model since the dimension of residues is large and different from
each other. Finally the pre-processed data was used to evolve various
ANN structures for determining R5X4 viruses. Furthermore ROC
analysis was applied to ANNs to show their real performances. The
results indicate that R5X4 viruses successfully classified with high
sensitivity and specificity values training and testing ROC analysis
for RBF, which gives the best performance among ANN structures.
Abstract: Objective: The objective of this paper is to assess the
hospitals preparedness for emergency using WHO standards.
Method: This is a cross-sectional study, consisted of site visit,
questionnaire survey, 16 health facilities were included. The WHO
standard for emergency preparedness of health facilities was used to
evaluate and assess the hospitals preparedness of health facilities.
Result: 13 hospitals were responded. They scored below average
in all measure >75%), while above average score was in 7 out 9 nine
measure with a range of 8%-25%. Un acceptable below average was
noted in two measures only.
Discussion: The biggest challenge facing the hospitals in their
emergency intervention is the lack of pre-emergency and emergency
preparedness plans as well as the coordination of the hospitals
response mechanisms.
Conclusion: The studied hospitals presently are far from
international disasters preparedness protocols. That necessitates
improvements in emergency preparedness, as well as in physician
skills for injury management.
Abstract: A homologous series of aromatic esters, 4-nalkanoyloxybenzylidene-
4--bromoanilines, nABBA,
consisting of two 1,4-disubstituted phenyl cores and a Schiff
base central linkage was synthesized. All the members can be
differed by the number of carbon atoms at terminal
alkanoyloxy chain (CnH2n-1COO-, n = 2, 6, 18). The molecular
structure of nABBA was confirmed with infrared
spectroscopy, nuclear magnetic resonance (NMR)
spectroscopy and electron-ionization mass (EI-MS)
spectrometry. Mesomorphic properties were studied using
differential scanning calorimetry and polarizing optical
microscopy.
Abstract: This paper explores the sense of place in the Vredefort Dome World Heritage site, South Africa, as an essential input for the formulation of spatial planning proposals for the area. Intangible aspects such as personal and symbolic meanings of sites are currently not integrated in spatial planning in South Africa. This may have a detrimental effect on local inhabitants who have a long history with the site and built up a strong place identity. Involving local inhabitants at an early stage of the planning process and incorporating their attitudes and opinions in future intervention in the area, may also contribute to the acceptance of the legitimacy of future policy. An interdisciplinary and mixed-method research approach was followed in this study in order to identify possible ways to anchor spatial planning proposals in the identity of the place. In essence, the qualitative study revealed that inhabitants reflect a deep and personal relationship with and within the area, which contributes significantly to their sense of emotional security and selfidentity. Results include a strong conservation-orientated attitude with regard to the natural rural character of the site, especially in the inner core.
Abstract: Bioinformatics methods for predicting the T cell
coreceptor usage from the array of membrane protein of HIV-1 are
investigated. In this study, we aim to propose an effective prediction
method for dealing with the three-class classification problem of
CXCR4 (X4), CCR5 (R5) and CCR5/CXCR4 (R5X4). We made
efforts in investigating the coreceptor prediction problem as follows: 1)
proposing a feature set of informative physicochemical properties
which is cooperated with SVM to achieve high prediction test
accuracy of 81.48%, compared with the existing method with
accuracy of 70.00%; 2) establishing a large up-to-date data set by
increasing the size from 159 to 1225 sequences to verify the proposed
prediction method where the mean test accuracy is 88.59%, and 3)
analyzing the set of 14 informative physicochemical properties to
further understand the characteristics of HIV-1coreceptors.
Abstract: This research was aimed to develop and determine the
quality of online learning activities kit as well as to examine the
learning achievement of students and their satisfaction towards the kit
through authentic assessment. The tools in this research contained
online learning activities kit on plant in Thai literature in compliance
with the School Botanical Garden of Plant Genetic Conservation
Project under the Royal Initiative of Her Royal Highness Princess
Maha Chakri Sirindhorn, the assessment form, the learning
achievement test, the satisfaction form and the authentic assessment
form. The population consisted of 40 students in the second range of
primary years (Prathomsuksa 4 to 6) at Ban Khao Rak School,
Suratthani Province, Thailand. The research results showed that the
content quality of the developed online learning activities kit as
assessed by the experts was 4.70 on average or at very high level.
The pre-test and post-test comparison was made to examine the
learning achievement and it revealed that the post-test score was
higher than the pre-test score with statistical significance at the .01
level. The satisfaction of the sampling group towards the online
learning activities kit was 4.74 or at the highest level. The authentic
assessment showed an average of 1.69 or at good level. Therefore,
the online learning activities kit on plant in Thai literature in
compliance with the School Botanical Garden of Plant Genetic
Conservation Project under the Royal Initiative of Her Royal
Highness Princess Maha Chakri Sirindhorn could be used in real
classroom situations.
Abstract: Estimating the reliability of a computer network has been a subject of great interest. It is a well known fact that this problem is NP-hard. In this paper we present a very efficient combinatorial approach for Monte Carlo reliability estimation of a network with unreliable nodes and unreliable edges. Its core is the computation of some network combinatorial invariants. These invariants, once computed, directly provide pure and simple framework for computation of network reliability. As a specific case of this approach we obtain tight lower and upper bounds for distributed network reliability (the so called residual connectedness reliability). We also present some simulation results.
Abstract: This paper presents the prediction of air flow,
humidity and temperature patterns in a co-current pilot plant spray
dryer fitted with a pressure nozzle using a three dimensional model.
The modelling was done with a Computational Fluid Dynamic
package (Fluent 6.3), in which the gas phase is modelled as
continuum using the Euler approach and the droplet/ particle phase is
modelled by the Discrete Phase model (Lagrange approach).Good
agreement was obtained with published experimental data where the
CFD simulation correctly predicts a fast downward central flowing
core and slow recirculation zones near the walls. In this work, the
effects of the air flow pattern on droplets trajectories, residence time
distribution of droplets and deposition of the droplets on the wall also
were investigated where atomizing of maltodextrin solution was
used.
Abstract: Depression is a serious mental health problem that
affects people of all ages, including children and adolescents. Studies
showed that female gender is one of the risk factors may influence
the development of depression in adolescents. However, some of the
studies from Turkey suggested that gender does not lead to any
significant difference in the youth depression level. Therefore, the
presented study investigated whether girls differ from boys in respect
of depression. The association between genders and test scores for
the adolescents in a population of primary and secondary school
students was also evaluated. The study was consisting of 254
adolescents (122 boys and 132 girls) with a mean age of 13.86±1.43
(Mean±SD) ranging from 12-16 years. Psychological assessment was
performed using Children-s Depression Inventory (CDI). Chi-square
and Student-s t-test statistics were employed to analyze the data. The
mean of the CDI scores of the girls were higher than boys- CDI
scores (t = -4.580, p = 0.001). Higher ratio appeared for the girls
when they compared with boy group-s depression levels using a CDI
cut-off point of 19 (p = 0.001, Odds Ratio = 2,603). The findings of
the present study suggested that adolescent girls have high level of
depression than adolescent boys aged between 12-16 years in
Turkey. Although some studies reported that there is no any
differences depression level between adolescent boys and girls in
Turkey, result of the present study showed that adolescent girls have
high level of depression than adolescent boys in Turkey.
Abstract: The evolution of logic circuits, which falls under the heading of evolvable hardware, is carried out by evolutionary algorithms. These algorithms are able to automatically configure reconfigurable devices. One of main difficulties in developing evolvable hardware with the ability to design functional electrical circuits is to choose the most favourable EA features such as fitness function, chromosome representations, population size, genetic operators and individual selection. Until now several researchers from the evolvable hardware community have used and tuned these parameters and various rules on how to select the value of a particular parameter have been proposed. However, to date, no one has presented a study regarding the size of the chromosome representation (circuit layout) to be used as a platform for the evolution in order to increase the evolvability, reduce the number of generations and optimize the digital logic circuits through reducing the number of logic gates. In this paper this topic has been thoroughly investigated and the optimal parameters for these EA features have been proposed. The evolution of logic circuits has been carried out by an extrinsic evolvable hardware system which uses (1+λ) evolution strategy as the core of the evolution.
Abstract: Water borne polyurethane (PU) based on newly prepared hyperbranched poly (amine-ester) (HBPAE) was applied and evaluated as organic coating material. HBPAE was prepared through one-pot synthesis between trimethylol propane as a core and AB2 branched monomer which was obtained via Michal addition of methyl methacrylate (MMA) and diethanol amine (DEA). PU was prepared from HBPAE using different ratios of toluene diisocyanate (TDI) to form cured coating film. The prepared HBPAE was characterized using; GPC, FT-IR and 1H-NMR. The mechanical properties (impact, hardness, adhesion, and flexibility), thermal properties (DSC and TGA) and chemical resistance of the applied film were estimated. The results indicated 50% of TDI is the selected ratio. This formulation represents a promising candidate to be used as coating material.