Abstract: The purposes of this study are 1) to study the impact
of the 3-community-core model: House (H), Temple (T), and School
(S) with the co-operation of official departments on community
development to ASEAN economic community involvement and 2) to
study the procedures and extension of the model. The research which
is a qualitative research is based on the formal and informal
interviews. Local people in a community are observed. Group
interview is, also, operated by executors and cooperators in the
school in the community. In terms of social and cultural dimension,
the 3-community-core model consisting of house, temple and school
is the base of Thai cultures bringing about understanding, happiness
and unity to the community. The result of this research is that the
official departments in accompanied with this model developers
cooperatively work together in the community to support such factors
as budget, plan, activities. Moreover, the need of community, and the
continual result to sustain the community are satisfied by the model
implementation. In terms of the procedures of the model
implementation, executors and co-operators can work, coordinate,
think, and launch their public relation altogether. Concerning the
model development, this enables the community to achieve its goal to
prepare the community’s readiness for ASEAN Economic
Community involvement.
Abstract: Since Network-on-Chip (NoC) uses network
interfaces (NIs) to improve the design productivity, by now, there
have been a few papers addressing the design and implementation of a
NI module. However, none of them considered the difference of
address encoding methods between NoC and the traditional
bus-shared architecture. On the basis of this difference, in the paper,
we introduce a transmit mechanism to solve such a problem for global
asynchronous locally synchronous (GALS) NoC. Furthermore, we
give the concrete implementation of the NI module in this transmit
mechanism. Finally, we evaluate its performance and area overhead
by a VHDL-based cycle-accurate RTL model and simulation results
confirm the validity of this address-oriented transmit mechanism.
Abstract: Power transformers are among the most important and
expensive equipments in the electric power systems. Consequently
the transformer protection is an essential part of the system
protection. This paper presents a new method for locating
transformer winding faults such as turn-to-turn, turn-to-core, turn-totransformer
body, turn-to-earth, and high voltage winding to low
voltage winding. In this study the current and voltage signals of input
and output terminals of the transformer are measured, which the
Fourier transform of measured signals and harmonic analysis
determine the fault's location.
Abstract: This paper presents an analysis result of relationship
between business and information technology (IT) in business process
reengineering (BPR). 258 Japanese firm-level data collected have been
analyzed using structural equation modeling. This analysis was aimed
to illuminating success factors of achieve effective BPR. Analysis was
focused on management factors (including organizational factors) and
implementing management method (e.g. balanced score card, internal
control, etc.).These results would contribute for achieving effective
BPR by showing effective tasks and environment to be focused.
Abstract: Business process automation is an important task in an
enterprise business environment software development. The
requirements of processing acceleration and automation level of
enterprises are inherently different from one organization to another.
We present a methodology and system for automation of business
process management system architecture by multi-agent collaboration
based on SOA. Design layer processes are modeled in semantic
markup language for web services application. At the core of our
system is considering certain types of human tasks to their further
automation across over multiple platform environments. An
improved abnormality processing with model for automation of
BPMS architecture by multi-agent collaboration based on SOA is
introduced. Validating system for efficiency of process automation,
an application for educational knowledge base instance would also be
described.
Abstract: Psoriasis is a chronic inflammatory skin condition
which affects 2-3% of population around the world. Psoriasis Area
and Severity Index (PASI) is a gold standard to assess psoriasis
severity as well as the treatment efficacy. Although a gold standard,
PASI is rarely used because it is tedious and complex. In practice,
PASI score is determined subjectively by dermatologists, therefore
inter and intra variations of assessment are possible to happen even
among expert dermatologists. This research develops an algorithm to
assess psoriasis lesion for PASI scoring objectively. Focus of this
research is thickness assessment as one of PASI four parameters
beside area, erythema and scaliness. Psoriasis lesion thickness is
measured by averaging the total elevation from lesion base to lesion
surface. Thickness values of 122 3D images taken from 39 patients
are grouped into 4 PASI thickness score using K-means clustering.
Validation on lesion base construction is performed using twelve
body curvature models and show good result with coefficient of
determinant (R2) is equal to 1.
Abstract: This work proposes an approach to address automatic
text summarization. This approach is a trainable summarizer, which
takes into account several features, including sentence position,
positive keyword, negative keyword, sentence centrality, sentence
resemblance to the title, sentence inclusion of name entity, sentence
inclusion of numerical data, sentence relative length, Bushy path of
the sentence and aggregated similarity for each sentence to generate
summaries. First we investigate the effect of each sentence feature on
the summarization task. Then we use all features score function to
train genetic algorithm (GA) and mathematical regression (MR)
models to obtain a suitable combination of feature weights. The
proposed approach performance is measured at several compression
rates on a data corpus composed of 100 English religious articles.
The results of the proposed approach are promising.
Abstract: The exact gain shape profile of erbium doped fiber
amplifiers (EDFA`s) are depends on fiber length and Er3 ion
densities. This paper optimized several of erbium doped fiber
parameters to obtain high performance characteristic at pump
wavelengths of λp= 980 nm and λs= 1550 nm for three different
pump powers. The maximum gain obtained for pump powers (10, 30
and 50mw) is nearly (19, 30 and 33 dB) at optimizations. The
required numerical aperture NA to obtain maximum gain becomes
less when pump power increased. The amplifier gain is increase
when Er+3doped near the center of the fiber core. The simulation has
been done by using optisystem 5.0 software (CAD for Photonics, a
license product of a Canadian based company) at 2.5 Gbps.
Abstract: Postgraduate education is generally aimed at providing in-depth knowledge and understanding that include general philosophy in the world sciences, management, technologies, applications and other elements closely related to specific areas. In most universities, besides core and non-core subjects, a thesis is one of the requirements for the postgraduate student to accomplish before graduating. This paper reports on the empirical investigation into attributes that are associated with the obstacles to thesis accomplishment among postgraduate students. Using the quantitative approach the experiences of postgraduate students were tapped. Findings clearly revealed that information seeking, writing skills and other factors which refer to supervisor and time management, in particular, are recognized as contributory factors which positively or negatively influence postgraduates’ thesis accomplishment. Among these, writing skills dimensions were found to be the most difficult process in thesis accomplishment compared to information seeking and other factors. This pessimistic indication has provided some implications not only for the students but supervisors and institutions as a whole.
Abstract: The presented work is motivated by a French law
regarding nuclear waste management. A new conceptual Accelerator
Driven System (ADS) designed for the Minor Actinides (MA)
transmutation has been assessed by numerical simulation. The
MUltiple Spallation Target (MUST) ADS combines high thermal power (up to 1.4 GWth) and high specific power. A 30 mA and 1
GeV proton beam is divided into three secondary beams transmitted on three liquid lead-bismuth spallation targets. Neutron and thermalhydraulic
simulations have been performed with the code MURE, based on the Monte-Carlo transport code MCNPX. A methodology has been developed to define characteristic of the MUST ADS concept according to a specific transmutation scenario. The reference
scenario is based on a MA flux (neptunium, americium and curium)
providing from European Fast Reactor (EPR) and a plutonium multireprocessing
strategy is accounted for. The MUST ADS reference
concept is a sodium cooled fast reactor. The MA fuel at equilibrium is mixed with MgO inert matrix to limit the core reactivity and
improve the fuel thermal conductivity. The fuel is irradiated over five
years. Five years of cooling and two years for the fuel fabrication are
taken into account. The MUST ADS reference concept burns about 50% of the initial MA inventory during a complete cycle. In term of
mass, up to 570 kg/year are transmuted in one concept. The methodology to design the MUST ADS and to calculate fuel
composition at equilibrium is precisely described in the paper. A detailed fuel evolution analysis is performed and the reference scenario is compared to a scenario where only americium transmutation is performed.
Abstract: This article summarizes ways to verify neutron
fluence for neutron transmutation doping of silicon with phosphorus
on the LVR-15 reactor. Neutron fluence is determined using
activation detectors placed along the crystal in a strip or encapsulated
in a rod holder. Holders are placed at the centre of a water-filled
capsule or in an aluminum or silicon ingot that simulates a real single
crystal. If the diameter of the crystal is significantly less than the
capsule diameter and water from the primary circuit enters the free
space in the capsule, neutron interaction in the water changes neutron
fluence, affecting axial irradiation homogeneity. The effect of
moving the capsule vertically in the channel relative to maximum
neutron fluence in the reactor core was also measured. Even a small
shift of the capsule-s centre causes great irradiation inhomogeneity.
This effect was measured using activation detectors, and was also
confirmed by MCNP calculation.
Abstract: The objective of current study is to investigate the
differences of winning and losing teams in terms of goal scoring and
passing sequences. Total of 31 matches from UEFA-EURO 2012
were analyzed and 5 matches were excluded from analysis due to
matches end up drawn. There are two groups of variable used in the
study which is; i. the goal scoring variable and: ii. passing sequences
variable. Data were analyzed using Wilcoxon matched pair rank test
with significant value set at p < 0.05. Current study found the timing
of goal scored was significantly higher for winning team at 1st half
(Z=-3.416, p=.001) and 2nd half (Z=-3.252, p=.001). The scoring
frequency was also found to be increase as time progressed and the
last 15 minutes of the game was the time interval the most goals
scored. The indicators that were significantly differences between
winning and losing team were the goal scored (Z=-4.578, p=.000),
the head (Z=-2.500, p=.012), the right foot (Z=-3.788,p=.000),
corner (Z=-.2.126,p=.033), open play (Z=-3.744,p=.000), inside the
penalty box (Z=-4.174, p=.000) , attackers (Z=-2.976, p=.003) and
also the midfielders (Z=-3.400, p=.001). Regarding the passing
sequences, there are significance difference between both teams in
short passing sequences (Z=-.4.141, p=.000). While for the long
passing, there were no significance difference (Z=-.1.795, p=.073).
The data gathered in present study can be used by the coaches to
construct detailed training program based on their objectives.
Abstract: Prior research evidenced that unimodal biometric
systems have several tradeoffs like noisy data, intra-class variations,
restricted degrees of freedom, non-universality, spoof attacks, and
unacceptable error rates. In order for the biometric system to be more
secure and to provide high performance accuracy, more than one
form of biometrics are required. Hence, the need arise for multimodal
biometrics using combinations of different biometric modalities. This
paper introduces a multimodal biometric system (MMBS) based on
fusion of whole dorsal hand geometry and fingerprints that acquires
right and left (Rt/Lt) near-infra-red (NIR) dorsal hand geometry (HG)
shape and (Rt/Lt) index and ring fingerprints (FP). Database of 100
volunteers were acquired using the designed prototype. The acquired
images were found to have good quality for all features and patterns
extraction to all modalities. HG features based on the hand shape
anatomical landmarks were extracted. Robust and fast algorithms for
FP minutia points feature extraction and matching were used. Feature
vectors that belong to similar biometric traits were fused using
feature fusion methodologies. Scores obtained from different
biometric trait matchers were fused using the Min-Max
transformation-based score fusion technique. Final normalized scores
were merged using the sum of scores method to obtain a single
decision about the personal identity based on multiple independent
sources. High individuality of the fused traits and user acceptability
of the designed system along with its experimental high performance
biometric measures showed that this MMBS can be considered for
med-high security levels biometric identification purposes.
Abstract: This paper aims at numerically analysing the effect
of an active flow control (AFC) by a vortex generator jet (VGJ)
submerged in a boundary layer via Chimera Grids and Detached-
Eddy Simulation (DES). The performance of DES results are
judged against Reynolds-Averaged Navier-Stokes (RANS) and
compared with the experiments that showed an unsteady vortex
motion downstream of VGJ. Experimental results showed that
the mechanism of embedding logitudinal vortex structure in the
main stream flow is quite effective in increasing the near wall
momentum of separated aircraft wing. In order to simulate such
a flow configuration together with the VGJ, an efficient numerical
approach is required. This requirement is fulfilled by performing
the DES simulation over the flat plate using the DLR TAU Code.
The DES predictions identify the vortex region via smooth hybrid
length scale and predict the unsteady vortex motion observed in
the experiments. The DES results also showed that the sufficient
grid refinement in the vortex region resolves the turbulent scales
downstream of the VGJ, the spatial vortex core postion and nondimensional
momentum coefficient RVx .
Abstract: The Pads have unique values of thermophysical
properties (THP) having important contribution over heat transfer
into the PCB structure.
Materials with high thermal diffusivity (TD) rapidly adjust their
temperature to that of their surroundings, because the HT is quick in
compare to their volumetric heat capacity (VHC).
In the paper is presenting the diffusivity tests (ASTM E1461 flash
method) for PCBs with different core materials. In the experiments,
the multilayer structure of PCBA was taken into consideration, an
equivalent property referring to each of experimental structure be
practically measured.
Concerning to entire structure, the THP emphasize the major
contribution of substrate in establishing of reflow soldering process
(RSP) heat transfer necessities. This conclusion offer practical
solution for heat transfer time constant calculation as function of
thickness and substrate material diffusivity with an acceptable error
estimation.
Abstract: This paper proposes and implements an core transform architecture, which is one of the major processes in HEVC video compression standard. The proposed core transform architecture is implemented with only adders and shifters instead of area-consuming multipliers. Shifters in the proposed core transform architecture are implemented in wires and multiplexers, which significantly reduces chip area. Also, it can process from 4×4 to 16×16 blocks with common hardware by reusing processing elements. Designed core transform architecture in 0.13um technology can process a 16×16 block with 2-D transform in 130 cycles, and its gate count is 101,015 gates.
Abstract: The aim of the present study was to analyze and
distinguish playing pattern between winning and losing field hockey
team in Delhi 2012 tournament. The playing pattern is focus to the D
penetration (right, center, left.) and to distinguish D penetration
linking to end shot made from it. The data was recorded and analyzed
using Sportscode elite computer software. 12 matches were analyzed
from the tournament. Two groups of performance indicators are used
to analyze, that is D penetration right, center, and left. The type of
shot chosen is hit, push, flick, drag, drag flick, deflect sweep, deflect
push, scoop, sweep, and reverse hit. This is to distinguish the pattern
of play between winning and losing, only 2 performance indicator
showed high significant differences from right (Z=-2.87, p=.004,
p
Abstract: Genome profiling (GP), a genotype based technology, which exploits random PCR and temperature gradient gel electrophoresis, has been successful in identification/classification of organisms. In this technology, spiddos (Species identification dots) and PaSS (Pattern similarity score) were employed for measuring the closeness (or distance) between genomes. Based on the closeness (PaSS), we can buildup phylogenetic trees of the organisms. We noticed that the topology of the tree is rather robust against the experimental fluctuation conveyed by spiddos. This fact was confirmed quantitatively in this study by computer-simulation, providing the limit of the reliability of this highly powerful methodology. As a result, we could demonstrate the effectiveness of the GP approach for identification/classification of organisms.
Abstract: Information and Communications Technologies (ICT) has been integrated in education in many developing and developed countries alike, but the use of ICT in Tanzanian schools is dismal. Many Tanzanian secondary schools have no computers. The few schools with computers use them primarily for secretarial services and computer literacy training. The Tanzanian education system at other levels like secondary school level has to undergo substantial transformation, underscored by the growing application of new information and communication technology. This paper presents the e-readiness survey result from secondary schools in Tanzania. The paper also suggests how Tanzania can make use of the few present ICT resources to support and improve teaching and learning functions to improve performance and acquisition of knowledge by using e-Learning Management System (e-LMS).
Abstract: Most HWRs currently use natural uranium fuel. Using enriched uranium fuel results in a significant improvement in fuel cycle costs and uranium utilization. On the other hand, reactivity changes of HWRs over the full range of operating conditions from cold shutdown to full power are small. This reduces the required reactivity worth of control devices and minimizes local flux distribution perturbations, minimizing potential problems due to transient local overheating of fuel. Analyzing heavy water effectiveness on neutronic parameters such as enrichment requirements, peaking factor and reactivity is important and should pay attention as primary concepts of a HWR core designing. Two nuclear nuclear reactors of CANDU-type and hexagonal-type reactor cores of 33 fuel assemblies and 19 assemblies in 1.04 P/D have been respectively simulated using MCNP-4C code. Using heavy water and light water as moderator have been compared for achieving less reactivity insertion and enrichment requirements. Two fuel matrixes of (232Th/235U)O2 and (238/235U)O2 have been compared to achieve more economical and safe design. Heavy water not only decreased enrichment needs, but it concluded in negative reactivity insertions during moderator density variations. Thorium oxide fuel assemblies of 2.3% enrichment loaded into the core of heavy water moderator resulted in 0.751 fission to absorption ratio and peaking factor of 1.7 using. Heavy water not only provides negative reactivity insertion during temperature raises which changes moderator density but concluded in 2 to 10 kg reduction of enrichment requirements, depend on geometry type.