Abstract: This purpose of this paper is to develop and validate a
model to accurately predict the cell temperature of a PV module that
adapts to various mounting configurations, mounting locations, and
climates while only requiring readily available data from the module
manufacturer. Results from this model are also compared to results
from published cell temperature models. The models were used to
predict real-time performance from a PV water pumping systems in
the desert of Medenine, south of Tunisia using 60-min intervals of
measured performance data during one complete year. Statistical
analysis of the predicted results and measured data highlight possible
sources of errors and the limitations and/or adequacy of existing
models, to describe the temperature and efficiency of PV-cells and
consequently, the accuracy of performance of PV water pumping
systems prediction models.
Abstract: Previous the 3D model texture generation from multi-view images and mapping algorithms has issues in the texture chart generation which are the self-intersection and the concentration of the texture in texture space. Also we may suffer from some problems due to the occluded areas, such as inside parts of thighs. In this paper we propose a texture mapping technique for 3D models using multi-view images on the GPU. We do texture mapping directly on the GPU fragment shader per pixel without generation of the texture map. And we solve for the occluded area using the 3D model depth information. Our method needs more calculation on the GPU than previous works, but it has shown real-time performance and previously mentioned problems do not occur.
Abstract: A ten-year grazing study was conducted at the
Agriculture and Agri-Food Canada Brandon Research Centre in
Manitoba to study the effect of alfalfa inclusion and fertilizer (N, P,
K, and S) addition on economics and efficiency of non-renewable
energy use in meadow brome grass-based pasture systems for beef
production. Fertilizing grass-only or alfalfa-grass pastures to full soil
test recommendations improved pasture productivity, but did not
improve profitability compared to unfertilized pastures. Fertilizing
grass-only pastures resulted in the highest net loss of any pasture
management strategy in this study. Adding alfalfa at the time of
seeding, with no added fertilizer, was economically the best pasture
improvement strategy in this study. Because of moisture limitations,
adding commercial fertilizer to full soil test recommendations is
probably not economically justifiable in most years, especially with
the rising cost of fertilizer. Improving grass-only pastures by adding
fertilizer and/or alfalfa required additional non-renewable energy
inputs; however, the additional energy required for unfertilized
alfalfa-grass pastures was minimal compared to the fertilized
pastures. Of the four pasture management strategies, adding alfalfa
to grass pastures without adding fertilizer had the highest efficiency
of energy use. Based on energy use and economic performance, the
unfertilized alfalfa-grass pasture was the most efficient and
sustainable pasture system.
Abstract: Nevertheless the widespread application of finite
mixture models in segmentation, finite mixture model selection is
still an important issue. In fact, the selection of an adequate number
of segments is a key issue in deriving latent segments structures and
it is desirable that the selection criteria used for this end are effective.
In order to select among several information criteria, which may
support the selection of the correct number of segments we conduct a
simulation study. In particular, this study is intended to determine
which information criteria are more appropriate for mixture model
selection when considering data sets with only categorical
segmentation base variables. The generation of mixtures of
multinomial data supports the proposed analysis. As a result, we
establish a relationship between the level of measurement of
segmentation variables and some (eleven) information criteria-s
performance. The criterion AIC3 shows better performance (it
indicates the correct number of the simulated segments- structure
more often) when referring to mixtures of multinomial segmentation
base variables.
Abstract: It well recognized that one feature that makes a
successful company is its ability to successfully align its business goals with its information communication technologies platform.
Enterprise Resource Planning (ERP) systems contribute to achieve better performance by integrating various business functions and
providing support for information flows. However, the technological
systems complexity is known to prevent the business users to exploit in an efficient way the Enterprise Resource Planning Systems (ERP).
This paper aims to investigate the role of training in improving the
usage of ERP systems. To this end, we have designed an instrument
survey to employees of a Norwegian multinational global provider of
technology solutions. Based on the analysis of collected data, we have delineated a training model that could be high relevance for
both researchers and practitioners as a step towards a better
understanding of ERP system implementation.
Abstract: This paper present the harmonic elimination of hybrid
multilevel inverters (HMI) which could be increase the number of
output voltage level. Total Harmonic Distortion (THD) is one of the
most important requirements concerning performance indices.
Because of many numbers output levels of HMI, it had numerous
unknown variables of eliminate undesired individual harmonic and
THD nonlinear equations set. Optimized harmonic stepped waveform
(OHSW) is solving switching angles conventional method, but most
complicated for solving as added level. The artificial intelligent
techniques are deliberation to solve this problem. This paper presents
the Particle Swarm Optimization (PSO) technique for solving
switching angles to get minimum THD and eliminate undesired
individual harmonics of 15-levels hybrid multilevel inverters.
Consequently it had many variables and could eliminate numerous
harmonics. Both advantages including high level of inverter and
Particle Swarm Optimization (PSO) are used as powerful tools for
harmonics elimination.
Abstract: Conjugate natural convection in a differentially heated
square enclosure containing a polygon shaped object is studied numerically in this article. The effect of various polygon types on the
fluid flow and thermal performance of the enclosure is addressed for
different thermal conductivities. The governing equations are modeled
and solved numerically using the built-in finite element method of COMSOL software. It is found that the heat transfer rate remains
stable by varying the polygon types.
Abstract: Nigerian bread is baked with vitamin A fortified wheat flour. Study aimed at determining its contribution to preschoolers- vitamin A nutriture. A cross-sectional/experimental study was carried out in four poor-urban Local Government Areas (LGAs) of Metropolitan Lagos, Nigeria. A pretested food frequency questionnaire was administered to randomly selected mothers of 1600 preschoolers (24-59 months). Retinyl Palmitate content of fourteen bread samples randomly collected from bakeries in all LGAs was analyzed at 0 and 5 days at 25oC using High Performance Liquid Chromatography. Data analysis was done at p
Abstract: The highly nonlinear characteristics of drying
processes have prompted researchers to seek new nonlinear control
solutions. However, the relation between the implementation
complexity, on-line processing complexity, reliability control
structure and controller-s performance is not well established. The
present paper proposes high performance nonlinear fuzzy controllers
for a real-time operation of a drying machine, being developed under
a consistent match between those issues. A PCI-6025E data
acquisition device from National Instruments® was used, and the
control system was fully designed with MATLAB® / SIMULINK
language. Drying parameters, namely relative humidity and
temperature, were controlled through MIMOs Hybrid Bang-bang+PI
(BPI) and Four-dimensional Fuzzy Logic (FLC) real-time-based
controllers to perform drying tests on biological materials. The
performance of the drying strategies was compared through several
criteria, which are reported without controllers- retuning. Controllers-
performance analysis has showed much better performance of FLC
than BPI controller. The absolute errors were lower than 8,85 % for
Fuzzy Logic Controller, about three times lower than the
experimental results with BPI control.
Abstract: Nanophotocatalysts such as titanium (TiO2), zinc (ZnO), and iron (Fe2O3) oxides can be used in organic pollutants oxidation, and in many other applications. But among the challenges for technological application (scale-up) of the nanotechnology scientific developments two aspects are still little explored: research on environmental risk of the nanomaterials preparation methods, and the study of nanomaterials properties and/or performance variability. The environmental analysis was performed for six different methods of ZnO nanoparticles synthesis, and showed that it is possible to identify the more environmentally compatible process even at laboratory scale research. The obtained ZnO nanoparticles were tested as photocatalysts, and increased the degradation rate of the Rhodamine B dye up to 30 times.
Abstract: Traffic Engineering (TE) is the process of controlling
how traffic flows through a network in order to facilitate efficient and
reliable network operations while simultaneously optimizing network
resource utilization and traffic performance. TE improves the
management of data traffic within a network and provides the better
utilization of network resources. Many research works considers intra
and inter Traffic Engineering separately. But in reality one influences
the other. Hence the effective network performances of both inter and
intra Autonomous Systems (AS) are not optimized properly. To
achieve a better Joint Optimization of both Intra and Inter AS TE, we
propose a joint Optimization technique by considering intra-AS
features during inter – AS TE and vice versa. This work considers the
important criterion say latency within an AS and between ASes. and
proposes a Bi-Criteria Latency optimization model. Hence an overall
network performance can be improved by considering this jointoptimization
technique in terms of Latency.
Abstract: The performance and complexity of QoS routing depends on the complex interaction between a large set of parameters. This paper investigated the scaling properties of source-directed link-state routing in large core networks. The simulation results show that the routing algorithm, network topology, and link cost function each have a significant impact on the probability of successfully routing new connections. The experiments confirm and extend the findings of other studies, and also lend new insight designing efficient quality-of-service routing policies in large networks.
Abstract: The purpose of this article applies the monthly final
energy yield and failure data of 202 PV systems installed in Taiwan to
analyze the PV operational performance and system availability. This
data is collected by Industrial Technology Research Institute through
manual records. Bad data detection and failure data estimation
approaches are proposed to guarantee the quality of the received
information. The performance ratio value and system availability are
then calculated and compared with those of other countries. It is
indicated that the average performance ratio of Taiwan-s PV systems
is 0.74 and the availability is 95.7%. These results are similar with
those of Germany, Switzerland, Italy and Japan.
Abstract: We have devised a thermal carpet cloak theoretically
and implemented in silicon using layered metamaterial. The layered
metamaterial is composed of single crystalline silicon and its phononic
crystal. The design is based on a coordinate transformation. We
demonstrate the result with numerical simulation. Great cloaking
performance is achieved as a thermal insulator is well hidden under the
thermal carpet cloak. We also show that the thermal carpet cloak can
even the temperature on irregular surface. Using thermal carpet cloak
to manipulate the heat conduction is effective because of its low
complexity.
Abstract: In this paper effect of stator slots structure and
switching angle on a cylindrical single-phase brushless direct current
motor (BLDC) is analyzed. BLDC motor with three different
structures for stator slots is designed by using RMxprt software and
efficiency of BLDC motor for different structures in full-load
condition has been presented. Then the BLDC motor in different
conditions by using Maxwell 3D software is designed and with finite
element method is analyzed electromagnetically. At the end with the
use of MATLAB software influence of switching angle on motor
performance investigated and optimal angle has been determined.
The results indicate that with correct choosing of stator slots structure
and switching angle, maximum efficiency can be found.
Abstract: An advanced Monte Carlo simulation method, called Subset Simulation (SS) for the time-dependent reliability prediction for underground pipelines has been presented in this paper. The SS can provide better resolution for low failure probability level with efficient investigating of rare failure events which are commonly encountered in pipeline engineering applications. In SS method, random samples leading to progressive failure are generated efficiently and used for computing probabilistic performance by statistical variables. SS gains its efficiency as small probability event as a product of a sequence of intermediate events with larger conditional probabilities. The efficiency of SS has been demonstrated by numerical studies and attention in this work is devoted to scrutinise the robustness of the SS application in pipe reliability assessment. It is hoped that the development work can promote the use of SS tools for uncertainty propagation in the decision-making process of underground pipelines network reliability prediction.
Abstract: The purposes of this research are to study and develop
the algorithm of Thai spoonerism words by semi-automatic computer
programs, that is to say, in part of data input, syllables are already
separated and in part of spoonerism, the developed algorithm is
utilized, which can establish rules and mechanisms in Thai
spoonerism words for bi-syllables by utilizing analysis in elements of
the syllables, namely cluster consonant, vowel, intonation mark and
final consonant. From the study, it is found that bi-syllable Thai
spoonerism has 1 case of spoonerism mechanism, namely
transposition in value of vowel, intonation mark and consonant of
both 2 syllables but keeping consonant value and cluster word (if
any).
From the study, the rules and mechanisms in Thai spoonerism
word were applied to develop as Thai spoonerism word software,
utilizing PHP program. the software was brought to conduct a
performance test on software execution; it is found that the program
performs bi-syllable Thai spoonerism correctly or 99% of all words
used in the test and found faults on the program at 1% as the words
obtained from spoonerism may not be spelling in conformity with
Thai grammar and the answer in Thai spoonerism could be more than
1 answer.
Abstract: This paper deals optimized model to investigate the
effects of peak current, pulse on time and pulse off time in EDM performance on material removal rate of titanium alloy utilizing copper tungsten as electrode and positive polarity of the electrode. The experiments are carried out on Ti6Al4V. Experiments were
conducted by varying the peak current, pulse on time and pulse off time. A mathematical model is developed to correlate the influences of these variables and material removal rate of workpiece. Design of
experiments (DOE) method and response surface methodology
(RSM) techniques are implemented. The validity test of the fit and adequacy of the proposed models has been carried out through
analysis of variance (ANOVA). The obtained results evidence that as
the material removal rate increases as peak current and pulse on time
increases. The effect of pulse off time on MRR changes with peak ampere. The optimum machining conditions in favor of material removal rate are verified and compared. The optimum machining
conditions in favor of material removal rate are estimated and verified with proposed optimized results. It is observed that the developed model is within the limits of the agreeable error (about
4%) when compared to experimental results. This result leads to desirable material removal rate and economical industrial machining to optimize the input parameters.
Abstract: According to the statistics, the prevalence of congenital hearing loss in Taiwan is approximately six thousandths; furthermore, one thousandths of infants have severe hearing impairment. Hearing ability during infancy has significant impact in the development of children-s oral expressions, language maturity, cognitive performance, education ability and social behaviors in the future. Although most children born with hearing impairment have sensorineural hearing loss, almost every child more or less still retains some residual hearing. If provided with a hearing aid or cochlear implant (a bionic ear) timely in addition to hearing speech training, even severely hearing-impaired children can still learn to talk. On the other hand, those who failed to be diagnosed and thus unable to begin hearing and speech rehabilitations on a timely manner might lose an important opportunity to live a complete and healthy life. Eventually, the lack of hearing and speaking ability will affect the development of both mental and physical functions, intelligence, and social adaptability. Not only will this problem result in an irreparable regret to the hearing-impaired child for the life time, but also create a heavy burden for the family and society. Therefore, it is necessary to establish a set of computer-assisted predictive model that can accurately detect and help diagnose newborn hearing loss so that early interventions can be provided timely to eliminate waste of medical resources. This study uses information from the neonatal database of the case hospital as the subjects, adopting two different analysis methods of using support vector machine (SVM) for model predictions and using logistic regression to conduct factor screening prior to model predictions in SVM to examine the results. The results indicate that prediction accuracy is as high as 96.43% when the factors are screened and selected through logistic regression. Hence, the model constructed in this study will have real help in clinical diagnosis for the physicians and actually beneficial to the early interventions of newborn hearing impairment.
Abstract: The major problem that wireless communication
systems undergo is multipath fading caused by scattering of the
transmitted signal. However, we can treat multipath propagation as
multiple channels between the transmitter and receiver to improve
the signal-to-scattering-noise ratio. While using Single Input
Multiple Output (SIMO) systems, the diversity receivers extract
multiple signal branches or copies of the same signal received from
different channels and apply gain combining schemes such as Root
Mean Square Gain Combining (RMSGC). RMSGC asymptotically
yields an identical performance to that of the theoretically optimal
Maximum Ratio Combining (MRC) for values of mean Signal-to-
Noise-Ratio (SNR) above a certain threshold value without the need
for SNR estimation. This paper introduces an improvement of
RMSGC using two different issues. We found that post-detection and
de-noising the received signals improve the performance of RMSGC
and lower the threshold SNR.