Abstract: In this paper, creep constitutive equations of base
(Parent) and weld materials of the weldment for cold-drawn 304L
stainless steel have been obtained experimentally. For this purpose,
test samples have been generated from cold drawn bars and weld
material according to the ASTM standard. The creep behavior and
properties have been examined for these materials by conducting uniaxial
creep tests. Constant temperatures and constant load uni-axial
creep tests have been carried out at two high temperatures, 680 and
720 oC, subjected to constant loads, which produce initial stresses
ranging from 240 to 360 MPa. The experimental data have been used
to obtain the creep constitutive parameters using numerical
optimization techniques.
Abstract: The epoxidation of soybean oil at temperature of 600C
was provided the best result in terms of attaching the –OH
functionality. Temperatures below and above 600C it is likely the
attaching reaction did not proceed sufficiently fast. The considerable
yield below 40%, implies the oil is not completely converted, it is not
possible by conventional methods, because the epoxide decomposes
at the temperature required. The objective of this work was the
development of catalyst toward the conversion of epoxide and polyol
with reaction temperature at 50,60, and 700C. The effect of different
type of catalyst were studied, the effect of alcohols with different
molecular configuration was determined which leads to selective
addition of alcohols to the epoxide oils.
Abstract: Today, the Internet based communication has widen
the opportunity of event monitoring system in the medical field.
There is always a need of analyzing and designing secure and reliable
mobile communication between the hospital and biomedical
engineers mobile units. This study has been carried out to find
possible solution using SIP-based event notification for alerting the
technical staff about the Biomedical Device (BMD) status and
Patients treatment session. The Session Initiation Protocol (SIP) can
be used to create a medical event notification system. SIP can work
on a variety of devices. Its adoption as the protocol of choice for third
generation wireless networks allows for a robust and scalable
environment. One of the advantages of SIP is that it supports personal
mobility through the separation of user addressing and device
addressing. The solution for Telemed alert notification system is
based on SIP - Specific Event Notification. The aim of this project is
to extend mobility service to the hospital technicians who are using
Telemedicine system.
Abstract: The necessity of updating the numerical models inputs, because of geometrical and resistive variations in rivers subject to solid transport phenomena, requires detailed control and monitoring activities. The human employment and financial resources of these activities moves the research towards the development of expeditive methodologies, able to evaluate the outflows through the measurement of more easily acquirable sizes. Recent studies highlighted the dependence of the entropic parameter on the kinematical and geometrical flow conditions. They showed a meaningful variability according to the section shape, dimension and slope. Such dependences, even if not yet well defined, could reduce the difficulties during the field activities, and also the data elaboration time. On the basis of such evidences, the relationships between the entropic parameter and the geometrical and resistive sizes, obtained through a large and detailed laboratory experience on steady free surface flows in conditions of macro and intermediate homogeneous roughness, are analyzed and discussed.
Abstract: This paper presents the results of the preliminary investigation of microwave (MW) irradiation pretreatments on the anaerobic digestion of food residues using biochemical methane potential (BMP) assays. Low solids systems with a total solids (TS) content ranging from 5.0-10.0% were analyzed. The inoculum to bulk mass of substrates to water ratio was 1:2:2 (mass basis). The experimental conditions for pretreatments were as follows: a control (no MW irradiation), two runs with MW irradiation for 15 and 30 minutes at 320 W, and another two runs with MW irradiation at 528 W for 30 and 60 minutes. The cumulative biogas production were 6.3 L and 8.7 L for 15min/320 W and 30min/320 W MW irradiation conditions, respectively, and 10.5 L and 11.4 L biogas for 30min/528 W and 60min/528 W, respectively, as compared to the control giving 5.8 L biogas. Both an increase in exposure time of irradiation and power of MW had increased the rate and yield of biogas. Singlefactor ANOVA tests (p
Abstract: The advent of multi-million gate Field Programmable
Gate Arrays (FPGAs) with hardware support for multiplication opens
an opportunity to recreate a significant portion of the front end of a
human cochlea using this technology. In this paper we describe the
implementation of the cochlear filter and show that it is entirely
suited to a single device XC3S500 FPGA implementation .The filter
gave a good fit to real time data with efficiency of hardware usage.
Abstract: Fats and oils are made of esterified hydrocarbons
(RCOOR-) and this work demonstrates the substitution of R by
multi-walled CNTs (MWNTs). The resultant materials are fluidic, oily,
electrically conducting and excellent lubricants. Esterified MWNTs
can also respond to magnetic field when tubules contain long segments
of Fe
Abstract: Numerical simulations are performed for laminar
continuous and pulsed jets impinging on a surface in order to
investigate the effects of pulsing frequency on the heat transfer
characteristics. The time-averaged Nusselt number of pulsed jets is
larger in the impinging jet region as compared to the continuous jet,
while it is smaller in the outer wall jet region. At the stagnation point,
the mean and RMS Nusselt numbers become larger and smaller,
respectively, as the pulsing frequency increases. Unsteady behaviors
of vortical fluid motions and temperature field are also investigated to
understand the underlying mechanisms of heat transfer enhancement.
Abstract: Today with the rapid growth of telecommunications equipment, electronic and developing more and more networks of power, influence of electromagnetic waves on one another has become hot topic discussions. So in this article, this issue and appropriate mechanisms for EMC operations have been presented. First, impact of high voltage lines on the surrounding environment especially on the control room has been investigated, then to reduce electromagnetic radiation, various methods of shielding are provided and shielding effectiveness of them has been compared. It should be expressed that simulations have been done by the finite element method (FEM).
Abstract: Synthesis gas manufacturing by steam reforming of hydrocarbons is an important industrial process. High endothermic nature of the process makes it one of the most cost and heat intensive processes. In the present work, composite effect of different inert gases on synthesis gas yield, feed gas conversion and temperature distribution along the reactor length has been studied using a heterogeneous model. Mathematical model was developed as a first stage and validated against the existing process models. With the addition of inert gases, a higher yield of synthesis gas is observed. Simultaneously the rector outlet temperature drops to as low as 810 K. It was found that Xenon gives the highest yield and conversion while Helium gives the lowest temperature. Using Xenon inert gas 20 percent reduction in outlet temperature was observed compared to traditional case.
Abstract: The necessity of accurate and timely field data is
shared among organizations engaged in fundamentally different
activities, public services or commercial operations. Basically, there
are three major components in the process of the qualitative research:
data collection, interpretation and organization of data, and analytic
process. Representative technological advancements in terms of
innovation have been made in mobile devices (mobile phone, PDA-s,
tablets, laptops, etc). Resources that can be potentially applied on the
data collection activity for field researches in order to improve this
process.
This paper presents and discuss the main features of a mobile
phone based solution for field data collection, composed of basically
three modules: a survey editor, a server web application and a client
mobile application. The data gathering process begins with the
survey creation module, which enables the production of tailored
questionnaires. The field workforce receives the questionnaire(s) on
their mobile phones to collect the interviews responses and sending
them back to a server for immediate analysis.
Abstract: The overall penumbra is usually defined as the
distance, p20–80, separating the 20% and 80% of the dose on the beam axis at the depth of interest. This overall penumbra accounts
also for the fact that some photons emitted by the distal parts of the source are only partially attenuated by the collimator. Medulloblastoma is the most common type of childhood brain tumor
and often spreads to the spine. Current guidelines call for surgery to remove as much of the tumor as possible, followed by radiation of the brain and spinal cord, and finally treatment with chemotherapy.
The purpose of this paper was to present results on an Uniformity of dose distribution in radiation fields surrounding the spine using film
dosimetry and comparison with 3D treatment planning software.
Abstract: Mycophenolic acid “MPA" is a secondary metabolite
of Penicillium bervicompactum with antibiotic and
immunosuppressive properties. In this study, fermentation process
was established for production of mycophenolic acid by Penicillium
bervicompactum MUCL 19011 in shake flask. The maximum MPA
production, product yield and productivity were 1.379 g/L, 18.6 mg/g
glucose and 4.9 mg/L.h respectively. Glucose consumption, biomass
and MPA production profiles were investigated during fermentation
time. It was found that MPA production starts approximately after
180 hours and reaches to a maximum at 280 h. In the next step, the
effects of methionine and acetate concentrations on MPA production
were evaluated. Maximum MPA production, product yield and
productivity (1.763 g/L, 23.8 mg/g glucose and 6.30 mg/L. h
respectively) were obtained with using 2.5 g/L methionine in culture
medium. Further addition of methionine had not more positive effect
on MPA production. Finally, results showed that the addition of
acetate to the culture medium had not any observable effect on MPA
production
Abstract: Although in sustainable development field, innovative
solutions have been sought worldwide by environmental groups,
academia, governments and companies for many years, recently,
citizens and communities have emerged as a new group and taken
more and more active role in this field. Many scholars call for more
research on the role of community and community innovation in
sustainable development. This paper is to respond to the calls. In
this paper, we first summarize a comprehensive set of innovation
principles. Then, we do a qualitative cross case study by comparing
three community innovation cases in three different areas of sustainable
development according to the innovation principles. Finally,
we summarize the case comparison and discuss the implications
to sustainable development. A unified role model and innovation
distribution map of community innovation are developed to better
understand community innovation in sustainable development..
Abstract: Day by day technology increases and problems
associated with this technology also increase. Several researches
were carried out to investigate the deployment of such material safely
in geotechnical engineering in particular and civil engineering in
general. However, different types of waste material have such as
cement duct, fly ash and slag been proven to be suitable in several
applications. In this research cement dust mixed with different
percentages of sand will be used in some civil engineering
application as will be explained later in this paper throughout filed
and laboratory test. The used mixer (waste material with sand) prove
high performance, durability to environmental condition, low cost
and high benefits. At higher cement dust ratio, small cement ratio is
valuable for compressive strength and permeability. Also at small
cement dust ratio higher cement ratio is valuable for compressive
strength.
Abstract: Using data of listed Croatian firms from the Zagreb
Stock Exchange we analyze the relationship between firm ownership
(ownership concentration and type) and performance (ROA).
Empirical research was conducted for the period 2003-2010, yielding
with the total of 1,430 observations. Empirical findings based on
dynamic panel analysis indicate that ownership concentration
variable - CR4 is negatively related with performance, i.e. listed firms
with dispersed ownership perform better than firms with concentrated
ownership. Also, the research indicated that foreign controlled listed
firms perform better than domestically controlled firms. Majority
state owned firms perform worse than privately held firms but
dummy variable for privately controlled firms was not statistically
significant in the estimated panel model.
Abstract: Proper orthogonal decomposition (POD) is used to reconstruct spatio-temporal data of a fully developed turbulent channel flow with density variation at Reynolds number of 150, based on the friction velocity and the channel half-width, and Prandtl number of 0.71. To apply POD to the fully developed turbulent channel flow with density variation, the flow field (velocities, density, and temperature) is scaled by the corresponding root mean square values (rms) so that the flow field becomes dimensionless. A five-vector POD problem is solved numerically. The reconstructed second-order moments of velocity, temperature, and density from POD eigenfunctions compare favorably to the original Direct Numerical Simulation (DNS) data.
Abstract: This paper unifies power optimization approaches in
various energy converters, such as: thermal, solar, chemical, and
electrochemical engines, in particular fuel cells. Thermodynamics
leads to converter-s efficiency and limiting power. Efficiency
equations serve to solve problems of upgrading and downgrading of
resources. While optimization of steady systems applies the
differential calculus and Lagrange multipliers, dynamic optimization
involves variational calculus and dynamic programming. In reacting
systems chemical affinity constitutes a prevailing component of an
overall efficiency, thus the power is analyzed in terms of an active
part of chemical affinity. The main novelty of the present paper in the
energy yield context consists in showing that the generalized heat
flux Q (involving the traditional heat flux q plus the product of
temperature and the sum products of partial entropies and fluxes of
species) plays in complex cases (solar, chemical and electrochemical)
the same role as the traditional heat q in pure heat engines.
The presented methodology is also applied to power limits in fuel
cells as to systems which are electrochemical flow engines propelled
by chemical reactions. The performance of fuel cells is determined by
magnitudes and directions of participating streams and mechanism of
electric current generation. Voltage lowering below the reversible
voltage is a proper measure of cells imperfection. The voltage losses,
called polarization, include the contributions of three main sources:
activation, ohmic and concentration. Examples show power maxima
in fuel cells and prove the relevance of the extension of the thermal
machine theory to chemical and electrochemical systems. The main
novelty of the present paper in the FC context consists in introducing
an effective or reduced Gibbs free energy change between products p
and reactants s which take into account the decrease of voltage and
power caused by the incomplete conversion of the overall reaction.
Abstract: In this paper back-propagation artificial neural
network (BPANN) with Levenberg–Marquardt algorithm is
employed to predict the limiting drawing ratio (LDR) of the deep
drawing process. To prepare a training set for BPANN, some finite
element simulations were carried out. die and punch radius, die arc
radius, friction coefficient, thickness, yield strength of sheet and
strain hardening exponent were used as the input data and the LDR
as the specified output used in the training of neural network. As a
result of the specified parameters, the program will be able to
estimate the LDR for any new given condition. Comparing FEM and
BPANN results, an acceptable correlation was found.
Abstract: With today's fast lifestyles and busy schedule, nuclear
families are becoming popular. Thus, the elderly members of these
families are often neglected. This has lead to the popularity of the
concept of Community living for the aged. The elders reside at a
centre, which is controlled by the MANAGER. The manager takes
responsibility of the functioning of the centre which includes taking
care of 'residents' at the centre along with managing the daily chores
of the centre, which he accomplishes with the help of a number of
staff members and volunteers Often the Manager is not an employee
but a volunteer. In such cases especially, time is an important
constraint. A system, which provides an easy and efficient manner of
managing the working of an old age home in detail, will prove to be
of great benefit. We have developed a P.C. based organizer used to
monitor the various activities of an old age home. It is an effective
and easy-to-use system which will enable the manager to keep an
account of all the residents, their accounts, staff members, volunteers,
the centre-s logistic requirements etc. It is thus, a comprehensive
'Organizer' for Old Age Homes.