Abstract: This paper presented a theoretical and numerical investigation of the Compact Antenna Test Range (CATR) equipped with Super Hybrid Modulated Segmented Exponential Serrations (SHMSES). The investigation was based on diffraction theory and, more specifically, the Fresnel diffraction formulation. The CATR provides uniform illumination within the Fresnel region to test antenna. Application of serrated edges has been shown to be a good method to control diffraction at the edges of the reflectors. However, in order to get some insight into the positive effect of serrated edges a less rigorous analysis technique known as Physical Optics (PO) may be used. Ripple free and enhanced quiet zone width are observed for specific values of width and height modulation factors per serrations. The performance of SHMSE serrated reflector is evaluated in order to observe the effects of edge diffraction on the test zone fields.
Abstract: New Zealand-s product markets experienced a surge in
import competition beginning from the late 1970-s when its
government began to promote a policy of more open markets. This
study considers how the trade liberalization aspect of the policy may
have influenced unionization and union-organizing success. For
describing the trade liberalization, a model shows how the removal of
import tariffs can lead to countervailing influences upon the union
membership of a domestic firm. The evidence supports the prediction
that union membership has been decreased rather than increased. In
the context of debates concerning globalization, it can be said that the
power of unions has been diminished.
Abstract: In this paper, novel statistical sampling based equalization techniques and CNN based detection are proposed to increase the spectral efficiency of multiuser communication systems over fading channels. Multiuser communication combined with selective fading can result in interferences which severely deteriorate the quality of service in wireless data transmission (e.g. CDMA in mobile communication). The paper introduces new equalization methods to combat interferences by minimizing the Bit Error Rate (BER) as a function of the equalizer coefficients. This provides higher performance than the traditional Minimum Mean Square Error equalization. Since the calculation of BER as a function of the equalizer coefficients is of exponential complexity, statistical sampling methods are proposed to approximate the gradient which yields fast equalization and superior performance to the traditional algorithms. Efficient estimation of the gradient is achieved by using stratified sampling and the Li-Silvester bounds. A simple mechanism is derived to identify the dominant samples in real-time, for the sake of efficient estimation. The equalizer weights are adapted recursively by minimizing the estimated BER. The near-optimal performance of the new algorithms is also demonstrated by extensive simulations. The paper has also developed a (Cellular Neural Network) CNN based approach to detection. In this case fast quadratic optimization has been carried out by t, whereas the task of equalizer is to ensure the required template structure (sparseness) for the CNN. The performance of the method has also been analyzed by simulations.
Abstract: In non destructive testing by radiography, a perfect knowledge of the weld defect shape is an essential step to appreciate the quality of the weld and make decision on its acceptability or rejection. Because of the complex nature of the considered images, and in order that the detected defect region represents the most accurately possible the real defect, the choice of thresholding methods must be done judiciously. In this paper, performance criteria are used to conduct a comparative study of thresholding methods based on gray level histogram, 2-D histogram and locally adaptive approach for weld defect extraction in radiographic images.
Abstract: Thai and Vietnamese music had been influenced and inspired by the traditional Chinese music. Whereby the differences of the tuning systems as well as the music modes are obviously known . The research examined the character of musical instruments, songs and culture between Thai and Vietnamese. An analyzing of songs and modes and the study of tone vibration as well as timbre had been done accurately. This qualitative research is based on documentary and songs analysis, field study, interviews and focus group discussion of Thai and Vietnamese masters. The research aims are to examine the musical instruments and songs of both Thai and Vietnamese as well as the comparison of the sounding system between Thailand and Vietnam. The finding of the research has revealed that there are similarities in certain kinds of instruments but differences in the sound systems regarding songs and scale of Thailand and Vietnam. Both cultural musical instruments are diverse and synthetic combining native and foreign inspiring. An integral part of Vietnam has been highly impacted by Chinese musical convention. Korea, Mongolia and Japan music have also play an active and effectively influenced as their geographical related. Whereas Thailand has been influenced by Chinese and Indian traditional music. Both Thai and Vietnamese musical instruments can be divided into four groups: plucked strings, bowed strings, winds and percussion. Songs from both countries have their own characteristics. They are playing a role in touching people heart in ceremonies, social functions and an essential element of the native performing arts. The Vietnamese music melodies have been influenced by Chinese music and taken the same character as Chinese songs. Thai song has specific identity and variety showed in its unique melody. Pentatonic scales have effectively been used in composing Thai and Vietnamese songs, but in different implementing concept.
Abstract: Surveillance system is widely used in the traffic
monitoring. The deployment of cameras is moving toward a
ubiquitous camera (UbiCam) environment. In our previous study, a
novel service, called GPS-VT, was firstly proposed by incorporating
global positioning system (GPS) and visual tracking techniques for
the UbiCam environment. The first prototype is called GODTA
(GPS-based Moving Object Detection and Tracking Approach). For a
moving person carried GPS-enabled mobile device, he can be
tracking when he enters the field-of-view (FOV) of a camera
according to his real-time GPS coordinate. In this paper, GPS-VT
service is applied to the tracking of vehicles. The moving speed of a
vehicle is much faster than a person. It means that the time passing
through the FOV is much shorter than that of a person. Besides, the
update interval of GPS coordinate is once per second, it is
asynchronous with the frame rate of the real-time image. The above
asynchronous is worsen by the network transmission delay. These
factors are the main challenging to fulfill GPS-VT service on a
vehicle.In order to overcome the influence of the above factors, a
back-propagation neural network (BPNN) is used to predict the
possible lane before the vehicle enters the FOV of a camera. Then, a
template matching technique is used for the visual tracking of a target
vehicle. The experimental result shows that the target vehicle can be
located and tracking successfully. The success location rate of the
implemented prototype is higher than that of the previous GODTA.
Abstract: The groundwater is one of the main sources for
sustainability in the United Arab Emirates (UAE). Intensive
developments in Al-Ain area lead to increase water demand, which
consequently reduced the overall groundwater quantity in major
aquifers. However, in certain residential areas within Al-Ain, it has
been noticed that the groundwater level is rising, for example in
Sha-ab Al Askher area. The reasons for the groundwater rising
phenomenon are yet to be investigated. In this work, twenty four
seismic refraction profiles have been carried out along the study
pilot area; as well as field measurement of the groundwater level in
a number of available water wells in the area. The processed
seismic data indicated the deepest and shallowest groundwater
levels are 15m and 2.3 meters respectively. This result is greatly
consistent with the proper field measurement of the groundwater
level. The minimum detected value may be referred to perched
subsurface water which may be associated to the infiltration from
the surrounding water bodies such as lakes, and elevated farms. The
maximum values indicate the accurate groundwater level within the
study area. The findings of this work may be considered as a
preliminary help to the decision makers.
Abstract: Theoptimal extraction condition of dried Phaseolus
vulgaris powderwas studied. The three independent variables are raw
material concentration, shaking and centrifugaltime. The dependent
variables are both yield percentage of crude extract and alphaamylase
enzyme inhibition activity. The experimental design was
based on box-behnkendesign. Highest yield percentage of crude
extract could get from extraction condition at concentration of 1, 0,1,
concentration of 0.15 M ,extraction time for 2hour, and
separationtime for60 min. Moreover, the crude extract with highest
alpha-amylase enzyme inhibition activityoccurred by extraction
condition at concentration of 0.10 M, extraction time for 2 min, and
separation time for 45 min
Abstract: This paper presents a new methodology to study power and energy consumption in mechatronic systems early in the development process. This new approach makes use of two modeling languages to represent and simulate embedded control software and electromechanical subsystems in the discrete event and continuous time domain respectively within a single co-model. This co-model enables an accurate representation of power and energy consumption and facilitates the analysis and development of both software and electro-mechanical subsystems in parallel. This makes the engineers aware of energy-wise implications of different design alternatives and enables early trade-off analysis from the beginning of the analysis and design activities.
Abstract: Studying alternative raw materials for biodiesel production is of major importance. The use of mixtures with incorporation of wastes is an environmental friendly alternative and might reduce biodiesel production costs. The objective of the present work was: (i) to study biodiesel production using waste frying oil mixed with pork lard and (ii) to understand how mixture composition influences biodiesel quality. Biodiesel was produced by transesterification and quality was evaluated through determination of several parameters according to EN 14214. The weight fraction of lard in the mixture varied from 0 to 1 in 0.2 intervals. Biodiesel production yields varied from 81.7 to 88.0 (wt%), the lowest yields being the ones obtained using waste frying oil and lard alone as raw materials. The obtained products fulfilled most of the determined quality specifications according to European biodiesel quality standard EN 14214. Minimum purity (96.5 wt%) was closely obtained when waste frying oil was used alone and when 0.2% of lard was incorporated in the raw material (96.3 wt%); however, it ranged from 93.9 to 96.3 (wt%) being always close to the limit. From the evaluation of the influence of mixture composition in biodiesel quality, it was possible to establish a model to be used for predicting some parameters of biodiesel resulting from mixtures of waste frying oil with lard when different lard contents are used.
Abstract: The development of biomimetic micro-aerial-vehicles
(MAVs) with flapping wings is the future trend in military/domestic
field. The successful flight of MAVs is strongly related to the
understanding of unsteady aerodynamic performance of low Reynolds
number airfoils under dynamic flapping motion. This study explored
the effects of flapping frequency, stroke amplitude, and the inclined
angle of stroke plane on lift force and thrust force of a bio-inspiration
corrugated airfoil with 33 full factorial design of experiment and
ANOVA analysis. Unsteady vorticity flows over a corrugated thin
airfoil executing flapping motion are computed with time-dependent
two-dimensional laminar incompressible Reynolds-averaged
Navier-Stokes equations with the conformal hybrid mesh. The tested
freestream Reynolds number based on the chord length of airfoil as
characteristic length is fixed of 103. The dynamic mesh technique is
applied to model the flapping motion of a corrugated airfoil. Instant
vorticity contours over a complete flapping cycle clearly reveals the
flow mechanisms for lift force generation are dynamic stall, rotational
circulation, and wake capture. The thrust force is produced as the
leading edge vortex shedding from the trailing edge of airfoil to form a
reverse von Karman vortex. Results also indicated that the inclined
angle is the most significant factor on both the lift force and thrust
force. There are strong interactions between tested factors which mean
an optimization study on parameters should be conducted in further
runs.
Abstract: Home Automation is a field that, among other
subjects, is concerned with the comfort, security and energy
requirements of private homes. The configuration of automatic
functions in this type of houses is not always simple to its inhabitants
requiring the initial setup and regular adjustments. In this work, the
ubiquitous computing system vision is used, where the users- action
patterns are captured, recorded and used to create the contextawareness
that allows the self-configuration of the home automation
system. The system will try to free the users from setup adjustments
as the home tries to adapt to its inhabitants- real habits. In this paper
it is described a completely automated process to determine the light
state and act on them, taking in account the users- daily habits.
Artificial Neural Network (ANN) is used as a pattern recognition
method, classifying for each moment the light state. The work
presented uses data from a real house where a family is actually
living.
Abstract: The increasing development of wireless networks and
the widespread popularity of handheld devices such as Personal
Digital Assistants (PDAs), mobile phones and wireless tablets
represents an incredible opportunity to enable mobile devices as a
universal payment method, involving daily financial transactions.
Unfortunately, some issues hampering the widespread acceptance of
mobile payment such as accountability properties, privacy protection,
limitation of wireless network and mobile device. Recently, many
public-key cryptography based mobile payment protocol have been
proposed. However, limited capabilities of mobile devices and
wireless networks make these protocols are unsuitable for mobile
network. Moreover, these protocols were designed to preserve
traditional flow of payment data, which is vulnerable to attack and
increase the user-s risk. In this paper, we propose a private mobile
payment protocol which based on client centric model and by
employing symmetric key operations. The proposed mobile payment
protocol not only minimizes the computational operations and
communication passes between the engaging parties, but also
achieves a completely privacy protection for the payer. The future
work will concentrate on improving the verification solution to
support mobile user authentication and authorization for mobile
payment transactions.
Abstract: This research work proposed a study of fruit bruise detection by means of a biospeckle method, selecting the papaya fruit (Carica papaya) as testing body. Papaya is recognized as a fruit of outstanding nutritional qualities, showing high vitamin A content, calcium, carbohydrates, exhibiting high popularity all over the world, considering consumption and acceptability. The commercialization of papaya faces special problems which are associated to bruise generation during harvesting, packing and transportation. Papaya is classified as climacteric fruit, permitting to be harvested before the maturation is completed. However, by one side bruise generation is partially controlled once the fruit flesh exhibits high mechanical firmness. By the other side, mechanical loads can set a future bruise at that maturation stage, when it can not be detected yet by conventional methods. Mechanical damages of fruit skin leave an entrance door to microorganisms and pathogens, which will cause severe losses of quality attributes. Traditional techniques of fruit quality inspection include total soluble solids determination, mechanical firmness tests, visual inspections, which would hardly meet required conditions for a fully automated process. However, the pertinent literature reveals a new method named biospeckle which is based on the laser reflectance and interference phenomenon. The laser biospeckle or dynamic speckle is quantified by means of the Moment of Inertia, named after its mechanical counterpart due to similarity between the defining formulae. Biospeckle techniques are able to quantify biological activities of living tissues, which has been applied to seed viability analysis, vegetable senescence and similar topics. Since the biospeckle techniques can monitor tissue physiology, it could also detect changes in the fruit caused by mechanical damages. The proposed technique holds non invasive character, being able to generate numerical results consistent with an adequate automation. The experimental tests associated to this research work included the selection of papaya fruit at different maturation stages which were submitted to artificial mechanical bruising tests. Damages were visually compared with the frequency maps yielded by the biospeckle technique. Results were considered in close agreement.
Abstract: K-Means (KM) is considered one of the major
algorithms widely used in clustering. However, it still has some
problems, and one of them is in its initialization step where it is
normally done randomly. Another problem for KM is that it
converges to local minima. Genetic algorithms are one of the
evolutionary algorithms inspired from nature and utilized in the field
of clustering. In this paper, we propose two algorithms to solve the
initialization problem, Genetic Algorithm Initializes KM (GAIK) and
KM Initializes Genetic Algorithm (KIGA). To show the effectiveness
and efficiency of our algorithms, a comparative study was done
among GAIK, KIGA, Genetic-based Clustering Algorithm (GCA),
and FCM [19].
Abstract: This paper attempts to highlight the significant role of
knowledge management practices (KMP) and competencies in
improving the performance and efficiency of public sector
organizations. It appears that public sector organizations in
developing countries have not received much attention in the
research literature of knowledge management and competencies.
Therefore, this paper seeks to explore the role of KMP and
competencies in achieving superior performance among public sector
organizations in Malaysia in the broader perspective. Survey
questionnaires were distributed to all Administrative and Diplomatic
Officers (ADS) from 28 ministries located in Putrajaya, Malaysia.
This paper also examines preliminary empirical results on the
relationship between support for knowledge management practices,
competencies, and orientation in Malaysia-s public organizations.
This paper supports the notion that the practices of knowledge
management at the organizational level are a prerequisite for
successful organizational performance. In conclusion, the results not
only have the potential to contribute theoretically to both
management strategy and knowledge management field literature but
also to the area of organizational performance.
Abstract: We report in this paper the procedure of a system of
automatic speech recognition based on techniques of the dynamic
programming. The technique of temporal retiming is a technique
used to synchronize between two forms to compare. We will see how
this technique is adapted to the field of the automatic speech
recognition. We will expose, in a first place, the theory of the
function of retiming which is used to compare and to adjust an
unknown form with a whole of forms of reference constituting the
vocabulary of the application. Then we will give, in the second place,
the various algorithms necessary to their implementation on machine.
The algorithms which we will present were tested on part of the
corpus of words in Arab language Arabdic-10 [4] and gave whole
satisfaction. These algorithms are effective insofar as we apply them
to the small ones or average vocabularies.
Abstract: This paper is concerned with the production of an Arabic word semantic similarity benchmark dataset. It is the first of its kind for Arabic which was particularly developed to assess the accuracy of word semantic similarity measurements. Semantic similarity is an essential component to numerous applications in fields such as natural language processing, artificial intelligence, linguistics, and psychology. Most of the reported work has been done for English. To the best of our knowledge, there is no word similarity measure developed specifically for Arabic. In this paper, an Arabic benchmark dataset of 70 word pairs is presented. New methods and best possible available techniques have been used in this study to produce the Arabic dataset. This includes selecting and creating materials, collecting human ratings from a representative sample of participants, and calculating the overall ratings. This dataset will make a substantial contribution to future work in the field of Arabic WSS and hopefully it will be considered as a reference basis from which to evaluate and compare different methodologies in the field.
Abstract: Application of flexible structures has been
significantly, increased in industry and aerospace missions due to
their contributions and unique advantages over the rigid counterparts.
In this paper, vibration analysis of a flexible structure i.e., automobile
wiper blade is investigated and controlled. The wiper generates
unwanted noise and vibration during the wiping the rain and other
particles on windshield which may cause annoying noise in different
ranges of frequency. A two dimensional analytical modeled wiper
blade whose model accuracy is verified by numerical studies in
literature is considered in this study. Particle swarm optimization
(PSO) is employed in alliance with input shaping (IS) technique in
order to control or to attenuate the amplitude level of unwanted
noise/vibration of the wiper blade.
Abstract: Fractal analyses of successive event of explosion
earthquake and harmonic tremor recorded at Semeru volcano were
carried out to investigate the dynamical system regarding to their
generating mechanism. The explosive eruptions accompanied by
explosion earthquakes and following volcanic tremor which are
generated by continuous emission of volcanic ash. The fractal
dimension of successive event of explosion and harmonic tremor was
estimated by Critical Exponent Method (CEM). It was found that the
method yield a higher fractal dimension of explosion earthquakes and
gradually decrease during the occurrence of harmonic tremor, and can
be considerably as correlated complexity of the source mechanism
from the variance of fractal dimension.