Abstract: Sedimentation in reservoirs lowers the quality of
consumed water, reduce the volume of reservoir, lowers the
controllable amount of flood, increases the risk of water overflow
during possible floods and the risk of reversal and reduction of dam's
useful life. So in all stages of dam establishment such as cognitive
studies, phase-1 studies of design, control, construction and
maintenance, the problem of sedimentation in reservoir should be
considered. What engineers need to do is examine and develop the
methods to keep effective capacity of a reservoir, however engineers
should also consider the influences of the methods on the flood
disaster, functions of water use facilities and environmental
issues.This article first examines the sedimentation in reservoirs and
shows how to control it and then discusses the studies about the
sedimens in Siazakh Dam.
Abstract: This study evaluated the microbiological quality
and the sensory characteristics of carp fillets processed by the
sousvide method when stored at 2 and 10 °C. Four different
combinations of sauced–storage were studied then stored at 2 or 10
°C was evaluate periodically sensory, microbiological and
chemical quality. Batches stored at 2 °C had lower growth rates of
mesophiles and psychrotrophs. Moreover, these counts decreased
by increasing the heating temperature and time. Staphylococcus
aureus, Bacillus cereus, Clostridium perfringens and Listeria
monocytogenes were not found in any of the samples. The heat
treatment of 90 °C for 15 min and sauced was the most effective to
ensure the safety and extend the shelf-life of sousvide carp
preserving its sensory characteristics. This study establishes the
microbiological quality of sous vide carp and emphasizes the
relevance of the raw materials, heat treatment and storage
temperature to ensure the safety of the product.
Abstract: This paper presents a perturbation based search method
to solve the unconstrained binary quadratic programming problem.
The proposed algorithm was tested with some of the standard test
problems and the results are reported for 10 instances of 50, 100, 250,
& 500 variable problems. A comparison of the performance of the
proposed algorithm with other heuristics and optimization software is
made. Based on the results, it was found that the proposed algorithm
is computationally inexpensive and the solutions obtained match the
best known solutions for smaller sized problems. For larger instances,
the algorithm is capable of finding a solution within 0.11% of the
best known solution. Apart from being used as a stand-alone method,
this algorithm could also be incorporated with other heuristics to find
better solutions.
Abstract: During the process of compaction in Hot-Mix Asphalt
(HMA) mixtures, the distance between aggregate particles decreases
as they come together and eliminate air-voids. By measuring the
inter-particle distances in a cut-section of a HMA sample the degree
of compaction can be estimated. For this, a calibration curve is
generated by computer simulation technique when the gradation and
asphalt content of the HMA mixture are known. A two-dimensional
cross section of HMA specimen was simulated using the mixture
design information (gradation, asphalt content and air-void content).
Nearest neighbor distance methods such as Delaunay triangulation
were used to study the changes in inter-particle distance and area
distribution during the process of compaction in HMA. Such
computer simulations would enable making several hundreds of
repetitions in a short period of time without the necessity to compact
and analyze laboratory specimens in order to obtain good statistics on
the parameters defined. The distributions for the statistical
parameters based on computer simulations showed similar trends as
those of laboratory specimens.
Abstract: In this paper three basic approaches and different
methods under each of them for extracting region of interest (ROI)
from stationary images are explored. The results obtained for each of
the proposed methods are shown, and it is demonstrated where each
method outperforms the other. Two main problems in ROI
extraction: the channel selection problem and the saliency reversal
problem are discussed and how best these two are addressed by
various methods is also seen. The basic approaches are 1) Saliency
based approach 2) Wavelet based approach 3) Clustering based
approach. The saliency approach performs well on images containing
objects of high saturation and brightness. The wavelet based
approach performs well on natural scene images that contain regions
of distinct textures. The mean shift clustering approach partitions the
image into regions according to the density distribution of pixel
intensities. The experimental results of various methodologies show
that each technique performs at different acceptable levels for
various types of images.
Abstract: The aim of this study is to develop mathematical
relationships for the performance parameter brake thermal efficiency
(BTE) and emission parameter nitrogen oxides (NOx) for the various
esters of vegetable oils used as CI engine fuel. The BTE is an
important performance parameter defining the ability of engine to
utilize the energy supplied and power developed similarly it is
indication of efficiency of fuels used. The esters of cottonseed oil,
soybean oil, jatropha oil and hingan oil are prepared using
transesterification process and characterized for their physical and
main fuel properties including viscosity, density, flash point and
higher heating value using standard test methods. These esters are
tried as CI engine fuel to analyze the performance and emission
parameters in comparison to diesel. The results of the study indicate
that esters as a fuel does not differ greatly with that of diesel in
properties. The CI engine performance with esters as fuel is in line
with the diesel where as the emission parameters are reduced with the
use of esters.
The correlation developed between BTE and brake power(BP),
gross calorific value(CV), air-fuel ratio(A/F), heat carried away by
cooling water(HCW). Another equation is developed between the
NOx emission and CO, HC, smoke density (SD), exhaust gas
temperature (EGT). The equations are verified by comparing the
observed and calculated values which gives the coefficient of
correlation of 0.99 and 0.96 for the BTE and NOx equations
respectively.
Abstract: In this paper, we develop quartic nonpolynomial
spline method for the numerical solution of third order two point
boundary value problems. It is shown that the new method gives
approximations, which are better than those produced by other spline
methods. Convergence analysis of the method is discussed through
standard procedures. Two numerical examples are given to illustrate
the applicability and efficiency of the novel method.
Abstract: Natural gas usually includes H2S component which is
very toxic, hazardous and corrosive to environment, human being and
process equipments, respectively. Therefore, sweetening of the gas
(separation of H2S) is inevitable. To achieve this purpose, using
packed-bed columns with liquid absorbents such as MEA or DEA is
very common. Due to some problems of usual packed columns
especially high pressure drop of gas phase, a novel kind of them
called wetted-wire column (WWC) has been invented. The column
decreases the pressure drop significantly and improves the absorption
efficiency. The packings are very thin rods (like wire) and as long as
column. The column has 100 wires with a triangular arrangement and
counter current flows of gas and liquid phases. The observation
showed that at the same conditions, the absorption performance was
quite comparable to conventional packed-bed towers and a very low
pressure drop.
Abstract: The main criteria of designing in the most hydraulic
constructions essentially are based on runoff or discharge of water. Two of those important criteria are runoff and return period. Mostly,
these measures are calculated or estimated by stochastic data.
Another feature in hydrological data is their impreciseness.
Therefore, in order to deal with uncertainty and impreciseness, based
on Buckley-s estimation method, a new fuzzy method of evaluating hydrological measures are developed. The method introduces
triangular shape fuzzy numbers for different measures in which both
of the uncertainty and impreciseness concepts are considered. Besides, since another important consideration in most of the
hydrological studies is comparison of a measure during different
months or years, a new fuzzy method which is consistent with special form of proposed fuzzy numbers, is also developed. Finally, to
illustrate the methods more explicitly, the two algorithms are tested on one simple example and a real case study.
Abstract: Today, people are more interested in the foods
beneficial on their health. However, there are still lacks of accurate
knowledge in the field of biological properties, functional properties,
including the application of legume in foods. This study focused on
antioxidant activity of soybean (SB) and fermented soybean (FSB)
crude extracts evaluating to have more information in fortification SB
and FSB crude extracts in food products and/or dietary supplement.
SB and FSB crude extracts were prepared by infusion with water and
ethanol. The antioxidant activity of crude extracts was studied with
DPPH and ABTS assay including commercial standard. From both
DPPH and ABTS assay, the antioxidant activity of SB and FSB water
crude extract showed higher antioxidant activity than ethanol crude
extract, and FSB crude extract showed higher antioxidant activity
than SB crude extract. In DPPH assay, BHT and vitamin C showed
IC50 values at 0.241, 0.039 mg/ml, in ABTS assay. In addition,
Trolox showed IC50 at 0.058 mg/ml respectively. FSB water crude
extract showed high antioxidant activity. Finally, the functional
properties study of both water and ethanol crude extracts should be
done for beneficial in application of these extracts in food products
and dietary supplement in the near future.
Abstract: Functional gastrointestinal disorders affect millions of people spread all age regardless of race and sex. There are, however, rare diagnostic methods for the functional gastrointestinal disorders because functional disorders show no evidence of organic and physical causes. Our research group identified recently that the gastrointestinal tract well in the patients with the functional gastrointestinal disorders becomes more rigid than healthy people when palpating the abdominal regions overlaying the gastrointestinal tract. Aim of this study is, therefore, to develop a diagnostic system for the functional gastrointestinal disorders based on ultrasound technique, which can quantify the characteristic above related to the rigidity of the gastrointestinal tract well. Ultrasound system was designed. The system consisted of transmitter, ultrasonic transducer, receiver, TGC, and CPLD, and verified via a phantom test. For the phantom test, ten soft-tissue specimens were harvested from porcine. Five of them were then treated chemically to mimic a rigid condition of gastrointestinal tract well, which was induced by functional gastrointestinal disorders. Additionally, the specimens were tested mechanically to identify if the mimic was reasonable. The customized ultrasound system was finally verified through application to human subjects with/without functional gastrointestinal disorders (Normal and Patient Groups). It was identified from the mechanical test that the chemically treated specimens were more rigid than normal specimen. This finding was favorably compared with the result obtained from the phantom test. The phantom test also showed that ultrasound system well described the specimen geometric characteristics and detected an alteration in the specimens. The maximum amplitude of the ultrasonic reflective signal in the rigid specimens (0.2±0.1Vp-p) at the interface between the fat and muscle layers was explicitly higher than that in the normal specimens (0.1±0.0Vp-p). Clinical tests using our customized ultrasound system for human subject showed that the maximum amplitudes of the ultrasonic reflective signals near to the gastrointestinal tract well for the patient group (2.6±0.3Vp-p) were generally higher than those in normal group (0.1±0.2Vp-p). Here, maximum reflective signals was appeared at 20mm depth approximately from abdominal skin for all human subjects, corresponding to the location of the boundary layer close to gastrointestinal tract well. These results suggest that newly designed diagnostic system based on ultrasound technique may diagnose enough the functional gastrointestinal disorders.
Abstract: This paper addresses control of commutation of switched reluctance (SR) motor without the use of a physical position detector. Rotor position detection schemes for SR motor based on magnetisation characteristics of the motor use normal excitation or applied current /voltage pulses. The resulting schemes are referred to as passive or active methods respectively. The research effort is in realizing an economical sensorless SR rotor position detector that is accurate, reliable and robust to suit a particular application. An effective and reliable means of generating commutation signals of an SR motor based on inductance profile of its stator windings determined using active probing technique is presented. The scheme has been validated online using a 4-phase 8/6 SR motor and an 8-bit processor.
Abstract: Carbon fibers have specific characteristics in
comparison with industrial and structural materials used in different
applications. Special properties of carbon fibers make them attractive
for reinforcing and fabrication of composites. These fibers have been
utilized for composites of metals, ceramics and plastics. However,
it-s mainly used in different forms to reinforce lightweight polymer
materials such as epoxy resin, polyesters or polyamides. The
composites of carbon fiber are stronger than steel, stiffer than
titanium, and lighter than aluminum and nowadays they are used in a
variety of applications. This study explains applications of carbon
fibers in different fields such as space, aviation, transportation,
medical, construction, energy, sporting goods, electronics, and the
other commercial/industrial applications. The last findings of
composites with polymer, metal and ceramic matrices containing
carbon fibers and their applications in the world investigated.
Researches show that carbon fibers-reinforced composites due to
unique properties (including high specific strength and specific
modulus, low thermal expansion coefficient, high fatigue strength,
and high thermal stability) can be replaced with common industrial
and structural materials.
Abstract: The aim of this studywas toinvestigate the effect
ofrunning classification (sprint, middle, and long distance)and two
distances on blood lactate (BLa), heart rate (HR), and rating of
perceived exertion (RPE) Borg scale ratings in collegiate athletes. On
different days, runners (n = 15) ran 400m and 1600m at a five min
mile pace, followed by a two min 6mph jog, and a two min 3mph
walk as part of the cool down. BLa, HR, and RPE were taken at
baseline, post-run, plus 2 and 4 min recovery times. The middle and
long distance runners exhibited lower BLa concentrations than sprint
runners after two min of recovery post 400 m runs, immediately after,
and two and four min recovery periods post 1600 m runs. When
compared to sprint runners, distance runners may have exhibited the
ability to clear BLa more quickly, particularly after running 1600 m.
Abstract: Water Sensitive Urban Design (WSUD) features are
increasingly used to treat and manage polluted stormwater runoff in urbanised areas. It is important to monitor and evaluate the effectiveness of the infrastructure in achieving their intended performance targets after constructing and operating these features
overtime. The paper presents the various methods of analysis used to
assess the effectiveness of the in-situ WSUD features, such as: onsite visual inspections during operational and non operational periods, maintenance audits and periodic water quality testing. The results will contribute to a better understanding of the operational and
maintenance needs of in-situ WSUD features and assist in providing recommendations to better manage life cycle performance.
Abstract: The heart tissue is an excitable media. A Cellular
Automata is a type of model that can be used to model cardiac action
potential propagation. One of the advantages of this approach against
the methods based on differential equations is its high speed in large
scale simulations. Recent cellular automata models are not able to
avoid flat edges in the result patterns or have large neighborhoods. In
this paper, we present a new model to eliminate flat edges by
minimum number of neighbors.
Abstract: This paper proposes a Wavelength Division
Multiplexing (WDM) technology based Storage Area Network
(SAN) for all type of Disaster recovery operation. It considers
recovery when all paths failure in the network as well as the main
SAN site failure also the all backup sites failure by the effect of
natural disasters such as earthquakes, fires and floods, power outage,
and terrorist attacks, as initially SAN were designed to work within
distance limited environments[2]. Paper also presents a NEW PATH
algorithm when path failure occurs. The simulation result and
analysis is presented for the proposed architecture with performance
consideration.
Abstract: Background, measuring an individual-s Health
Literacy is gaining attention, yet no appropriate instrument is available
in Taiwan. Measurement tools that were developed and used in
western countries may not be appropriate for use in Taiwan due to a
different language system. Purpose of this research was to develop a
Health Literacy measurement instrument specific for Taiwan adults.
Methods, several experts of clinic physicians; healthcare
administrators and scholars identified 125 common used health related
Chinese phrases from major medical knowledge sources that easy
accessible to the public. A five-point Likert scale is used to measure
the understanding level of the target population. Such measurement is
then used to compare with the correctness of their answers to a health
knowledge test for validation. Samples, samples under study were
purposefully taken from four groups of people in the northern
Pingtung, OPD patients, university students, community residents,
and casual visitors to the central park. A set of health knowledge index
with 10 questions is used to screen those false responses. A sample
size of 686 valid cases out of 776 was then included to construct this
scale. An independent t-test was used to examine each individual
phrase. The phrases with the highest significance are then identified
and retained to compose this scale. Result, a Taiwan Health Literacy
Scale (THLS) was finalized with 66 health-related phrases under nine
divisions. Cronbach-s alpha of each division is at a satisfactory level
of 89% and above. Conclusions, factors significantly differentiate the
levels of health literacy are education, female gender, age, family
members of stroke victims, experience with patient care, and
healthcare professionals in the initial application in this study..
Abstract: In this work we propose a novel Steganographic
method for hiding information within the spatial domain of the gray
scale image. The proposed approach works by dividing the cover into
blocks of equal sizes and then embeds the message in the edge of the
block depending on the number of ones in left four bits of the pixel.
The proposed approach is tested on a database consists of 100
different images. Experimental results, compared with other
methods, showed that the proposed approach hide more large
information and gave a good visual quality stego-image that can be
seen by human eyes.
Abstract: One of the most important issues in multi-criteria decision analysis (MCDA) is to determine the weights of criteria so that all alternatives can be compared based on the collective performance of criteria. In this paper, one of popular methods in data envelopment analysis (DEA) known as common weights (CWs) is used to determine the weights in MCDA. Two frontiers named ideal and anti-ideal frontiers, instead of ideal and anti-ideal alternatives, are defined based on two new proposed CWs models. Ideal and antiideal frontiers are more flexible than that of alternatives. According to the optimal solutions of these two models, the distances of an alternative from the ideal and anti-ideal frontiers are derived. Then, a relative distance is introduced to measure the value of each alternative. The suggested models are linear and despite weight restrictions are feasible. An example is presented for explaining the method and for comparing to the existing literature.