Abstract: Pt/γ-Al2O3 membrane catalysts were prepared via an
evaporative-crystallization deposition method. The obtained Pt/γ-
Al2O3 catalyst activity was tested after characterization (SEM-EDAX
observation, BET measurement, permeability assessment) in the
catalytic oxidation of selected volatile organic compound (VOC) i.e.
propane, fed in mixture of oxygen. The VOC conversion (nearly
90%) obtained by varying the operating temperature showed that
flow-through membrane reactor might do better in the abatement of
VOCs.
Abstract: One of the key aspects of power quality improvement
in power system is the mitigation of voltage sags/swells and flicker.
Custom power devices have been known as the best tools for voltage
disturbances mitigation as well as reactive power compensation.
Dynamic Voltage Restorer (DVR) which is the most efficient and
effective modern custom power device can provide the most
commercial solution to solve several problems of power quality in
distribution networks. This paper deals with analysis and simulation
technique of DVR based on instantaneous power theory which is a
quick control to detect signals. The main purpose of this work is to
remove three important disturbances including voltage sags/swells
and flicker. Simulation of the proposed method was carried out on
two sample systems by using Matlab software environment and the
results of simulation show that the proposed method is able to
provide desirable power quality in the presence of wide range of
disturbances.
Abstract: Corrosion of concrete sewer pipes induced by
sulphuric acid attack is a recognised problem worldwide, which is not
only an attribute of countries with hot climate conditions as thought
before. The significance of this problem is by far only realised when
the pipe collapses causing surface flooding and other severe
consequences. To change the existing post-reactive attitude of
managing companies, easy to use and robust models are required to
be developed which currently lack reliable data to be correctly
calibrated. This paper focuses on laboratory experiments of
establishing concrete pipe corrosion rate by submerging samples in to
0.5pH sulphuric acid solution for 56 days under 10ºC, 20ºC and 30ºC
temperature regimes. The result showed that at very early stage of the
corrosion process the samples gained overall mass, at 30ºC the
corrosion progressed quicker than for other temperature regimes,
however with time the corrosion level for 10ºC and 20ºC regimes
tended towards those at 30ºC. Overall, at these conditions the
corrosion rates of 10 mm/year, 13,5 mm/year and 17 mm/year were
observed.
Abstract: Agro-industry is one of major industries that have
strong impacts on national economic incomes, growth, stability, and
sustainable development. Moreover, this industry also has strong
influences on social, cultural and political issues. Furthermore, this
industry, as producing primary and secondary products, is facing
challenges from such diverse factors such as demand inconsistency,
intense international competition, technological advancements and
new competitors. In order to maintain and to improve industry’s
competitiveness in both domestics and international markets, science
and technology are key factors. Besides hard sciences and
technologies, modern industrial engineering concepts such as Just in
Time (JIT) Total Quality Management (TQM), Quick Response
(QR), Supply Chain Management (SCM) and Lean can be very
effective to support to increase efficiency and effectiveness of these
agricultural products on world stage. Onion is one of Thailand’s
major export products which bring back national incomes. But, it is
also facing challenges in many ways. This paper focused its interests
in onion packing process and its related activities such as storage and
shipment from one of major packing plant and storage in Mae Wang
District, Chiang Mai, Thailand, by applying Toyota Production
System (TPS) or Lean concepts, to improve process capability
throughout the entire packing and distribution process which will be
profitable for the whole onion supply chain. And it will be beneficial
to other related agricultural products in Thailand and other ASEAN
countries.
Abstract: Roadway planning and design is a very complex
process involving five key phases before a project is completed;
planning, project development, final design, right-of-way, and
construction. The planning phase for a new roadway transportation
project is a very critical phase as it greatly affects all latter phases of
the project. A location study is usually performed during the
preliminary planning phase in a new roadway project. The objective
of the location study is to develop alignment alternatives that are cost
efficient considering land acquisition and construction costs. This
paper describes a methodology to develop optimal preliminary
roadway alignments utilizing spatial-data. Four optimization criteria
are taken into consideration; roadway length, land cost, land slope,
and environmental impacts. The basic concept of the methodology is
to convert the proposed project area into a grid, which represents the
search space for an optimal alignment. The aforementioned
optimization criteria are represented in each of the grid’s cells. A
spatial-data optimization technique is utilized to find the optimal
alignment in the search space based on the four optimization criteria.
Two case studies for new roadway projects in Duval County in the
State of Florida are presented to illustrate the methodology. The
optimization output alignments are compared to the proposed Florida
Department of Transportation (FDOT) alignments. The comparison is
based on right-of-way costs for the alignments. For both case studies,
the right-of-way costs for the developed optimal alignments were
found to be significantly lower than the FDOT alignments.
Abstract: One of the main challenges in using the Discrete
Element Method (DEM) is to specify the correct input parameter
values. In general, the models are sensitive to the input parameter
values and accurate results can only be achieved if the correct values
are specified. For the linear contact model, micro-parameters such as
the particle density, stiffness, coefficient of friction, as well as the
particle size and shape distributions are required. There is a need for
a procedure to accurately calibrate these parameters before any
attempt can be made to accurately model a complete bulk materials
handling system. Since DEM is often used to model applications in
the mining and quarrying industries, a calibration procedure was
developed for materials that consist of relatively large (up to 40 mm
in size) particles. A coarse crushed aggregate was used as the test
material. Using a specially designed large shear box with a diameter
of 590 mm, the confined Young’s modulus (bulk stiffness) and
internal friction angle of the material were measured by means of the
confined compression test and the direct shear test respectively. DEM
models of the experimental setup were developed and the input
parameter values were varied iteratively until a close correlation
between the experimental and numerical results was achieved. The
calibration process was validated by modelling the pull-out of an
anchor from a bed of material. The model results compared well with
experimental measurement.
Abstract: The strawberry tree (Arbutus unedo L.) is a small tree
or shrub from botanical Ericaceae family that grows spontaneously
nearby the Mediterranean basin and produce edible red fruits. A
traditional processed fruit application, in Mediterranean countries, is
the production of a spirit (known as aguardente de medronho, in
Portugal) obtained from the fermented fruit. The main objective of
our study was to contribute to the knowledge about the influence of
the degree of maturation of fruits in the volatile composition and
quality of arbutus spirit. The major volatiles in the three distillates
fractions (head, heart and tail) obtained from fermentation of two
different fruit maturation levels were quantified by GC-FID analysis
and ANOVA one-way was performed. Additionally, the total
antioxidant capacity and total phenolic compounds of both arbutus
fruit spirits were determined, by ABTS and Folin-Ciocalteau method,
respectively. The methanol concentration is higher (1022.39 g/hL
a.a.) in the spirit made from fruits with highest total soluble solids,
which is a value above the legal limit (1000 g/hL a.a.). Overall, our
study emphasizes, for the first time, the influence of maturation
degree of arbutus fruits in the spirit volatile composition and quality.
Abstract: During the post-Civil War era, the city of Nashville,
Tennessee, had the highest mortality rate in the United States. The
elevated death and disease rates among former slaves were
attributable to lack of quality healthcare. To address the paucity of
healthcare services, Meharry Medical College, an institution with the
mission of educating minority professionals and serving the
underserved population, was established in 1876.
Purpose: The social ecological framework and partial least squares
(PLS) path modeling were used to quantify the impact of
socioeconomic status and adverse health outcome on primary care
professionals serving the disadvantaged community. Thus, the study
results could demonstrate the accomplishment of the College’s
mission of training primary care professionals to serve in underserved
areas.
Methods: Various statistical methods were used to analyze alumni
data from 1975 – 2013. K-means cluster analysis was utilized to
identify individual medical and dental graduates in the cluster groups
of the practice communities (Disadvantaged or Non-disadvantaged
Communities). Discriminant analysis was implemented to verify the
classification accuracy of cluster analysis. The independent t-test was
performed to detect the significant mean differences of respective
clustering and criterion variables. Chi-square test was used to test if
the proportions of primary care and non-primary care specialists are
consistent with those of medical and dental graduates practicing in
the designated community clusters. Finally, the PLS path model was
constructed to explore the construct validity of analytic model by
providing the magnitude effects of socioeconomic status and adverse
health outcome on primary care professionals serving the
disadvantaged community.
Results: Approximately 83% (3,192/3,864) of Meharry Medical
College’s medical and dental graduates from 1975 to 2013 were
practicing in disadvantaged communities. Independent t-test confirmed the content validity of the cluster analysis model. Also, the
PLS path modeling demonstrated that alumni served as primary care
professionals in communities with significantly lower socioeconomic
status and higher adverse health outcome (p < .001). The PLS path
modeling exhibited the meaningful interrelation between primary
care professionals practicing communities and surrounding
environments (socioeconomic statues and adverse health outcome),
which yielded model reliability, validity, and applicability.
Conclusion: This study applied social ecological theory and
analytic modeling approaches to assess the attainment of Meharry
Medical College’s mission of training primary care professionals to
serve in underserved areas, particularly in communities with low
socioeconomic status and high rates of adverse health outcomes. In
summary, the majority of medical and dental graduates from Meharry
Medical College provided primary care services to disadvantaged
communities with low socioeconomic status and high adverse health
outcome, which demonstrated that Meharry Medical College has
fulfilled its mission. The high reliability, validity, and applicability of
this model imply that it could be replicated for comparable
universities and colleges elsewhere.
Abstract: Introduction: There are multiple social, individual and
cultural factors that influence an individual’s decision to adopt family
planning methods especially among non-users in patriarchal societies
like Pakistan. Non-users, if targeted efficiently, can contribute
significantly to country’s CPR. A research study showed that nonusers
if convinced to adopt lactational amenorrhea method can shift
to long term methods in future. Research shows that if non users are
targeted efficiently a 59% reduction in unintended pregnancies in
Saharan Africa and South-Central and South-East Asia is anticipated.
Methods: We did secondary data analysis on Pakistan
Demographic Heath Survey (2012-13) dataset. Use of contraception
(never-use/ever-use) was the outcome variable. At univariate level
Chi-square/Fisher Exact test was used to assess relationship of
baseline covariates with contraception use. Then variables to be
incorporated in the model were checked for multicollinearity,
confounding and interaction. Then binary logistic regression (with an
urban-rural stratification) was done to find relationship between
contraception use and baseline demographic and social variables.
Results: The multivariate analyses of the study showed that
younger women (≤ 29 years)were more prone to be never users as
compared to those who were >30 years and this trend was seen in
urban areas (AOR 1.92, CI 1.453-2.536) as well as rural areas (AOR
1.809, CI 1.421-2.303). While looking at regional variation, women
from urban Sindh (AOR 1.548, CI 1.142-2.099) and urban
Balochistan (AOR 2.403, CI 1.504-3.839) had more never users as
compared to other urban regions. Women in the rich wealth quintile
were more never users and this was seen both in urban and rural
localities (urban (AOR 1.106 CI .753-1.624); rural areas (AOR 1.162,
CI .887-1.524)) even though these were not statistically significant.
Women idealizing more children (>4) are more never users as
compared to those idealizing less children in both urban (AOR 1.854,
CI 1.275-2.697) and rural areas (AOR 2.101, CI 1.514-2.916).
Women who never lost a pregnancy were more inclined to be nonusers
in rural areas (AOR 1.394, CI 1.127-1.723) .Women familiar
with only traditional or no method had more never users in rural areas
(AOR 1.717, CI 1.127-1.723) but in urban areas it wasn’t significant.
Women unaware of Lady Health Worker’s presence in their area
were more never users especially in rural areas (AOR 1.276, CI
1.014-1.607). Women who did not visit any care provider were more
never users (urban (AOR 11.738, CI 9.112-15.121) rural areas (AOR
7.832, CI 6.243-9.826)).
Discussion/Conclusion: This study concluded that government,
policy makers and private sector family planning programs should
focus on the untapped pool of never users (younger women from underserved provinces, in higher wealth quintiles, who desire more
children.). We need to make sure to cover catchment areas where
there are less LHWs and less providers as ignorance to modern
methods and never been visited by an LHW are important
determinants of never use. This all is in sync with previous literate
from similar developing countries.
Abstract: The effect of N2 pretreatment on the catalytic activity
of tungsten-based catalysts was investigated in the metathesis of
ethylene and trans-2-butene at 450oC and atmospheric pressure. The
presence of tungsten active species was confirmed by UV-Vis and
Raman spectroscopy. Compared to the WO3-based catalysts treated
in air, higher amount of WO4 2-tetrahedral species and lower amount
of WO3 crystalline species were observed on the N2-treated ones.
These contribute to the higher conversion of 2-butene and propylene
selectivity during 10 h time-on-stream. Moreover, N2 treatment led to
lower amount of coke formation as revealed by TPO of the spent
catalysts.
Abstract: Theory of Mind (ToM) refers to the ability to infer
another’s mental state. With appropriate ToM, one can behave well in
social interactions. A growing body of evidence has demonstrated that
patients with temporal lobe epilepsy (TLE) may damage ToM by
affecting on regions of the underlying neural network of ToM.
However, the question of whether there is cerebral laterality for ToM
functions remains open. This study aimed to examine whether there is
cerebral lateralization for ToM abilities in TLE patients. Sixty-seven
adult TLE patients and 30 matched healthy controls (HC) were
recruited. Patients were classified into right (RTLE), left (LTLE), and
bilateral (BTLE) TLE groups on the basis of a consensus panel review
of their seizure semiology, EEG findings, and brain imaging results.
All participants completed an intellectual test and four tasks measuring
basic and advanced ToM. The results showed that, on all ToM tasks,
(1) each patient group performed worse than HC; (2) there were no
significant differences between LTLE and RTLE groups; and (3) the
BTLE group performed the worst. It appears that the neural network
responsible for ToM is distributed evenly between the cerebral
hemispheres.
Abstract: This work sets out to debate the tensions involved in
the processes of contamination and self-purification in the urban
space, particularly in the streams that run through the Buenos Aires
metropolitan area. For much of their course, those streams are piped;
their waters do not come into contact with the outdoors until they
have reached deeply impoverished urban areas with high levels of
environmental contamination. These are peripheral zones that, until
thirty years ago, were marshlands and fields. They are now densely
populated areas largely lacking in urban infrastructure.
The Cárcova neighborhood, where this project is underway, is in
the José León Suárez section of General San Martín county, Buenos
Aires province. A stretch of José León Suarez canal crosses the
neighborhood. Starting upstream, this canal carries pollutants due to
the sewage and industrial waste released into it. Further downstream,
in the neighborhood, domestic drainage is poured into the stream. In
this paper, we formulate a hypothesis diametrical to the one that
holds that these neighborhoods are the primary source of
contamination, suggesting instead that in the stretch of the canal that
runs through the neighborhood the stream’s waters are actually
cleaned and the sediments accumulate pollutants. Indeed, the
stretches of water that runs through these neighborhoods act as water
processing plants for the metropolis.
This project has studied the different organic-load polluting
contributions to the water in a certain stretch of the canal, the
reduction of that load over the course of the canal, and the
incorporation of pollutants into the sediments. We have found that
the surface water has considerable ability to self-purify, mostly due to
processes of sedimentation and adsorption. The polluting load is
accumulated in the sediments where that load stabilizes slowly by
means of anaerobic processes. In this study, we also investigated the
risks of sediment management and the use of the processes studied
here in controlled conditions as tools of environmental restoration.
Abstract: Quality of Service (QoS) attributes as part of the
service description is an important factor for service attribute. It is not
easy to exactly quantify the weight of each QoS conditions since
human judgments based on their preference causes vagueness. As
web services selection requires optimization, evolutionary computing
based on heuristics to select an optimal solution is adopted. In this
work, the evolutionary computing technique Particle Swarm
Optimization (PSO) is used for selecting a suitable web services
based on the user’s weightage of each QoS values by optimizing the
QoS weight vector and thereby finding the best weight vectors for
best services that is being selected. Finally the results are compared
and analyzed using static inertia weight and deterministic inertia
weight of PSO.
Abstract: The Scheduling and mapping of tasks on a set of
processors is considered as a critical problem in parallel and
distributed computing system. This paper deals with the problem of
dynamic scheduling on a special type of multiprocessor architecture
known as Linear Crossed Cube (LCQ) network. This proposed
multiprocessor is a hybrid network which combines the features of
both linear types of architectures as well as cube based architectures.
Two standard dynamic scheduling schemes namely Minimum
Distance Scheduling (MDS) and Two Round Scheduling (TRS)
schemes are implemented on the LCQ network. Parallel tasks are
mapped and the imbalance of load is evaluated on different set of
processors in LCQ network. The simulations results are evaluated
and effort is made by means of through analysis of the results to
obtain the best solution for the given network in term of load
imbalance left and execution time. The other performance matrices
like speedup and efficiency are also evaluated with the given
dynamic algorithms.
Abstract: The following article presents Technology Centre of
Ostrava (TCO) in the Czech Republic describing the structure and
main research areas realized by the project ENET - Energy Units for
Utilization of non Traditional Energy Sources. More details are
presented from the research program dealing with transformation,
accumulation and distribution of electric energy. Technology Centre
has its own energy mix consisting of alternative sources of fuel
sources that use of process gases from the storage part and also the
energy from distribution network. The article will be focus on the
properties and application possibilities SiC semiconductor devices for
power semiconductor converter for photovoltaic systems.
Abstract: Recently, there is a lot of interest in the field of under
water optical wireless communication for short range because of
its high bandwidth. But in most of the previous works line of
sight propagation or single scattering of photons only considered.
In practical case this is not applicable because of beam blockage in
underwater and multiple scattering also occurred during the photons
propagation through water. In this paper we consider a non-line
of sight underwater wireless optical communication system with
multiple scattering and examine the performance of the system using
monte carlo simulation. The distribution scattering angle of photons
are modeled by Henyey-Greenstein method. The average bit error
rate is calculated using on-off keying modulation for different water
types.
Abstract: Present paper describes method of obtaining clay
ceramic foam (CCF) and foam concrete (FC), by direct foaming with
high speed mixer-disperser (HSMD). Three foaming agents (FA) are
compared for the FC and CCF production: SCHÄUMUNGSMITTEL
W 53 FLÜSSIG (Zschimmer & Schwarz Gmbh, Germany), SCF-
1245 (Sika, test sample, Latvia) and FAB-12 (Elade, Latvija). CCF
were obtained at 950, 1000°C, 1150°C and 1150°C firing temperature
and have mechanical compressive strength 1.2, 2.55 and 4.3 MPa and
porosity 79.4, 75.1, 71.6%, respectively. Obtained FC has 6-14 MPa
compressive strength and porosity 44-55%. The goal of this work
was development of a sustainable and durable ceramic cellular
structures using HSMD.
Abstract: This paper is part of a study to develop robots for
farming. As such power requirement to operate equipment attach to
such robots become an important factor. Soil-tool interaction plays
major role in power consumption, thus predicting accurately the
forces which act on the blade during the farming is very important for
optimal designing of farm equipment. In this paper, a finite element
investigation for tillage tools and soil interaction is described by
using an inelastic constitutive material law for agriculture
application. A 3-dimensional (3D) nonlinear finite element analysis
(FEA) is developed to examine behavior of a blade with different
rake angles moving in a block of soil, and to estimate the blade force.
The soil model considered is an elastic-plastic with non-associated
Drucker-Prager material model. Special use of contact elements are
employed to consider connection between soil-blade and soil-soil
surfaces. The FEA results are compared with experimental ones,
which show good agreement in accurately predicting draft forces
developed on the blade when it moves through the soil. Also a very
good correlation was obtained between FEA results and analytical
results from classical soil mechanics theories for straight blades.
These comparisons verified the FEA model developed. For analyzing
complicated soil-tool interactions and for optimum design of blades,
this method will be useful.
Abstract: Every year, a considerable amount of money is being
invested on research, mainly in the form of funding allocated to
universities and research institutes. To better distribute the available
funds and to set the most proper R&D investment strategies for the
future, evaluation of the productivity of the funded researchers and
the impact of such funding is crucial. In this paper, using the data on
15 years of journal publications of the NSERC (Natural Sciences and
Engineering research Council of Canada) funded researchers and by
means of bibliometric analysis, the scientific development of the
funded researchers and their scientific collaboration patterns will be
investigated in the period of 1996-2010. According to the results it
seems that there is a positive relation between the average level of
funding and quantity and quality of the scientific output. In addition,
whenever funding allocated to the researchers has increased, the
number of co-authors per paper has also augmented. Hence, the
increase in the level of funding may enable researchers to get
involved in larger projects and/or scientific teams and increase their
scientific output respectively.
Abstract: One of the crucial parameters of digital cryptographic
systems is the selection of the keys used and their distribution. The
randomness of the keys has a strong impact on the system’s security
strength being difficult to be predicted, guessed, reproduced, or
discovered by a cryptanalyst. Therefore, adequate key randomness
generation is still sought for the benefit of stronger cryptosystems.
This paper suggests an algorithm designed to generate and test
pseudo random number sequences intended for cryptographic
applications. This algorithm is based on mathematically manipulating
a publically agreed upon information between sender and receiver
over a public channel. This information is used as a seed for
performing some mathematical functions in order to generate a
sequence of pseudorandom numbers that will be used for
encryption/decryption purposes. This manipulation involves
permutations and substitutions that fulfill Shannon’s principle of
“confusion and diffusion”. ASCII code characters were utilized in the
generation process instead of using bit strings initially, which adds
more flexibility in testing different seed values. Finally, the obtained
results would indicate sound difficulty of guessing keys by attackers.