Abstract: Let F(x, y) = ax2 + bxy + cy2 be a positive definite
binary quadratic form with discriminant Δ whose base points lie on
the line x = -1/m for an integer m ≥ 2, let p be a prime number
and let Fp be a finite field. Let EF : y2 = ax3 + bx2 + cx be an
elliptic curve over Fp and let CF : ax3 + bx2 + cx ≡ 0(mod p) be
the cubic congruence corresponding to F. In this work we consider
some properties of positive definite quadratic forms, elliptic curves
and cubic congruences.
Abstract: The sensitivity of UAVs to the atmospheric effects are
apparent. All the same the meteorological support for the UAVs
missions is often non-adequate or partly missing.
In our paper we show a new complex meteorological support
system for different types of UAVs pilots, specialists and decision
makers, too. The mentioned system has two important parts with
different forecasts approach such as the statistical and dynamical
ones.
The statistical prediction approach is based on a large
climatological data base and the special analog method which is able
to select similar weather situations from the mentioned data base to
apply them during the forecasting procedure.
The applied dynamic approach uses the specific WRF model runs
twice a day and produces 96 hours, high resolution weather forecast
for the UAV users over the Hungary. An easy to use web-based
system can give important weather information over the Carpathian
basin in Central-Europe. The mentioned products can be reached via
internet connection.
Abstract: A variable structure model reference adaptive control
(VS-MRAC) strategy for active steering assistance of a two wheel
steering car is proposed. An ideal steering system with fixed
properties and moving on an ideal road is used as the reference
model, and the active steering assistance system is forced to attain
the same behavior as the reference model. The proposed system can
treat the nonlinear relationships between the side slip angles and
lateral forces on tire, and the uncertainties on friction of the road
surface, whose compensation are very important under critical
situations. Simulation results show improvements on yaw rate and
side slip.
Abstract: Sustainability and sustainable development have been
the main theme of many international conferences, such the UN Rio
de Janeiro 1992 Earth Summit This was followed by the appearance
of the global conferences at the late of the nineties and the early of
2000 to confirm the importance of the sustainable development .it
was focused on the importance of the economic development as it is
considered an effective tool in the operations of the sustainable
development. Industry plays a critical role in technological
innovations and research and development activities, which are
crucial for the economic and social development of any country.
Transportation and mobility are an important part or urban
economics and the quality of life. To analyze urban transportation
and its environmental impacts, a comprehensive approach is needed.
So this research aims to apply new approach for the development of
the urban communities that insure the continuity and facing the
deterioration. This approach aims to integrate sustainable transport
solutions with economic development and community development.
For that purpose we will concentrate on one of the most sustainable
cities in the world (Curitiba in Brazil) which provides the world with
a model in how to integrate sustainable transport considerations into
business development, road infrastructure development, and local
community development.
Abstract: The aim of this study was to investigate the pregnancy
outcomes of teenage mothers at DanKhunThot hospital, Nakhon
Ratchasima, Thailand. A retrospective descriptive study was
conducted in 573 of teenage pregnant from charts reviewed from 1st
October 2010-31st March, 2012. Data were analyzed by frequency
distribution, mean and Standard Deviation.
The results shown several problems and negatives outcomes of
pregnancy in teenager such as not attended prenatal care, Low birth
weight infants, death fetus in utero and other complications. The
results of this study can be utilized in the development of prenatal,
perinatal and post natal care services, especially in DanKhunthot
Hospital contexts. Moreover, the results were present to the District
Health Care committees in order to enhance health care service
system for teenage pregnancy of DanKhunthot District in further.
Abstract: Machine Translation, (hereafter in this document
referred to as the "MT") faces a lot of complex problems from its
origination. Extracting multiword expressions is also one of the
complex problems in MT. Finding multiword expressions during
translating a sentence from English into Urdu, through existing
solutions, takes a lot of time and occupies system resources. We have
designed a simple relational data approach, in which we simply set a
bit in dictionary (database) for multiword, to find and handle
multiword expression. This approach handles multiword efficiently.
Abstract: The flow field around a flat plate of infinite span has
been investigated for several values of the angle of attack. Numerical
predictions have been compared to experimental measurements, in
order to examine the effect of turbulence model and grid resolution
on the resultant aerodynamic forces acting on the plate. Also the
influence of the free-stream turbulence intensity, at the entrance of
the computational domain, has been investigated. A full campaign of
simulations has been conducted for three inclination angles (9°, 15°
and 30°), in order to obtain some practical guidelines to be used for
the simulation of the flow field around inclined plates and discs.
Abstract: In this work, the autoregressive vectors are used to
know dynamics of the Agricultural export and import, and the real
effective exchange rate (REER). In order to analyze the interactions,
the impulse- response function is used in decomposition of variance,
causality of Granger as well as the methodology of Johansen to know
the relations co integration. The REER causes agricultural export and
import in the sense of Granger. The influence displays the
innovations of the REER on the agricultural export and import is not
very great and the duration of the effects is short. It displays that
REER has an immediate positive effect, after the tenth year it
displays smooth results on the agricultural export. Evidence of a
vector exists co integration, In short run, REER has smaller effects
on export and import, compared to the long-run effects.
Abstract: A method to predict the column size for displacement based design of reinforced concrete frame buildings with higher target inter storey drift is reported here. The column depth derived from empirical relation as a function of given beam section, target inter-story drift, building plan features and common displacement based design parameters is used. Regarding the high drift requirement, a minimum column-beam moment capacity ratio is maintained during capacity design. The method is used in designing four, eight and twelve story frame buildings with displacement based design for three percent target inter storey drift. Non linear time history analysis of the designed buildings are performed under five artificial ground motions to show that the columns are found elastic enough to avoid column sway mechanism assuring that for the design the column size can be used with or without minor changes.
Abstract: This evaluation of land supply system performance in
China shall examine the combination of government functions and
national goals in order to perform a cost-benefit analysis of system
results. From the author's point of view, it is most productive to
evaluate land supply system performance at moments of system
transformation for the following reasons. The behavior and
input-output change of beneficial results at different times can be
observed when the system or policy changes and system performance
can be evaluated through a cost-benefit analysis during the process of
system transformation. Moreover, this evaluation method can avoid
the influence of land resource endowment. Different land resource
endowment methods and different economy development periods
result in different systems. This essay studies the contents, principles
and methods of land supply system performance evaluation. Taking
Beijing as an example, this essay optimizes and classifies the land
supply index, makes a quantitative evaluation of land supply system
performance through principal component analysis (PCA), and finally
analyzes the factors that influence land supply system performance at
times of system transformation.
Abstract: Industrial design engineering is an information and
knowledge intensive job. Although Wikipedia offers a lot of this
information, design engineers are better served with a wiki tailored to
their job, offering information in a compact manner and functioning
as a design tool. For that reason WikID has been developed.
However for the viability of a wiki, an active user community is
essential. The main subject of this paper is a study to the influence of
the communication and the contents of WikID on the user-s
willingness to contribute.
At first the theory about a website-s first impression, general
usability guidelines and user motivation in an online community is
studied. Using this theory, the aspects of the current site are analyzed
on their suitability. These results have been verified with a
questionnaire amongst 66 industrial design engineers (or students
industrial design engineering).
The main conclusion is that design engineers are enchanted with
the existence of WikID and its knowledge structure (taxonomy) but
this structure has not become clear without any guidance. In other
words, the knowledge structure is very helpful for inspiring and
guiding design engineers through their tailored knowledge domain in
WikID but this taxonomy has to be better communicated on the main
page. Thereby the main page needs to be fitted more to the target
group preferences.
Abstract: Here, in this work we study correspondence the energy density New agegraphic and the energy density Gauss- Bonnet models in flat universe. We reconstruct Λ and Λ ω for them with 0 ( ) 0 h a t = a t .
Abstract: When designing satellites, one of the major issues aside for designing its primary subsystems is to devise its thermal. The thermal management of satellites requires solving different sets of issues with regards to modelling. If the satellite is well conditioned all other parts of the satellite will have higher temperature no matter what. The main issue of thermal modelling for satellite design is really making sure that all the other points of the satellite will be within the temperature limits they are designed. The insertion of power electronics in aerospace technologies is becoming widespread and the modern electronic systems used in space must be reliable and efficient with thermal management unaffected by outer space constraints. Many advanced thermal management techniques have been developed in recent years that have application in high power electronic systems. This paper presents a Three-Dimensional Modal Transmission Line Matrix (3D-TLM) implementation of transient heat flow in space power electronics. In such kind of components heat dissipation and good thermal management are essential. Simulation provides the cheapest tool to investigate all aspects of power handling. The 3DTLM has been successful in modeling heat diffusion problems and has proven to be efficient in terms of stability and complex geometry. The results show a three-dimensional visualisation of self-heating phenomena in the device affected by outer space constraints, and will presents possible approaches for increasing the heat dissipation capability of the power modules.
Abstract: The paper proposes a methodology to process the signals coming from the Transcranial Magnetic Stimulation (TMS) in order to identify the pathology and evaluate the therapy to treat the patients affected by demency diseases. In particular, a fuzzy model is developed to identify the demency of the patients affected by Subcortical Ischemic Vascular Dementia (SIVD) and to measure the effect of a repetitive TMS on their motor performances. A tool is also presented to support the mentioned analysis.
Abstract: In this paper, we analyze and test a scheme for the
estimation of electrical fundamental frequency signals from the
harmonic load current and voltage signals.
The scheme was based on using two different Multi Layer
Artificial Neural Networks (ML-ANN) one for the current and the
other for the voltage.
This study also analyzes and tests the effect of choosing the
optimum artificial neural networks- sizes which determine the quality
and accuracy of the estimation of electrical fundamental frequency
signals.
The simulink tool box of the Matlab program for the simulation of
the test system and the test of the neural networks has been used.
Abstract: The linear SEF (Spectral Edge Frequency) parameter
and spectrum analysis method can not reflect the non-linear of EEG.
This method can not contribute to acquire real time analysis and obtain
a high confidence in the clinic due to low discrimination. To solve the
problems, the development of a new index is carried out using the
bispectrum analyzing the EEG(electroencephalogram) including the
non-linear characteristic. After analyzing the bispectrum of the 2
dimension, the most significant power spectrum density peaks appeared abundantly at the specific area in awakening and anesthesia state. These points are utilized to create the new index since many
peaks appeared at the specific area in the frequency coordinate. The measured range of an index was 0-100. An index is 20-50 at an anesthesia, while the index is 90-60 at the awake. New index could afford to effectively discriminate the awake and anesthesia state.
Abstract: Corrosion of metallic water pipelines buried below
ground surface is a function of the nature of the surrounding soil and
groundwater. This gives the importance of knowing the physical and
chemical characteristics of the pipe-s surrounding environment. The
corrosion of externally – unprotected metallic water pipelines,
specially ductile iron pipes, in localities with aggressive soil
conditions is becoming a significant problem. Anticorrosive
protection for metallic water pipelines, their fittings and accessories
is very important, because they may be attached by corrosion with
time. The tendency of a metallic substrate to corrode is a function of
the surface characteristics of the metal and of the metal/protective
film interface, the physical, electrical and electrochemical properties
of the film, and the nature of the environment in which the pipelines
system is placed. In this work the authors have looked at corrosion
problems of water pipelines and their control. The corrosive
properties of groundwater and soil environments are reviewed, and
parameters affecting corrosion are discussed. The purpose of this
work is to provide guidelines for materials selection in water and soil
environments, and how the water pipelines can be protected against
metallic corrosion.
Abstract: In this research, effect of combustion reaction
mechanism on direct initiation of detonation has been studied
numerically. For this purpose, reaction mechanism has been
simulated by using a three-step chemical kinetics model. The reaction
scheme consists sequentially of a chain-initiation and chainbranching
step, followed by a temperature -independent chaintermination.
In a previous research, the effect of chain-branching on
the direct initiation of detonation is studied. In this research effect of
chain-initiation on direct initiation of detonation is investigated. For
the investigation, first a characteristic time (τ) for each step of
mechanism, which includes effect of different kinetics parameters, is
defined. Then the effect of characteristic time of chain-initiation (τI)
on critical initiation energy is studied. It is seen that increasing τI,
causes critical initiation energy to be increased. Drawing detonation's
shock pressure diagrams for different cases, shows that in small value
of τI , kinetics has more important effect on the behavior of the wave.
Abstract: A number of automated shot-change detection
methods for indexing a video sequence to facilitate browsing and
retrieval have been proposed in recent years. This paper emphasizes
on the simulation of video shot boundary detection using one of the
methods of the color histogram wherein scaling of the histogram
metrics is an added feature. The difference between the histograms of
two consecutive frames is evaluated resulting in the metrics. Further
scaling of the metrics is performed to avoid ambiguity and to enable
the choice of apt threshold for any type of videos which involves
minor error due to flashlight, camera motion, etc. Two sample videos
are used here with resolution of 352 X 240 pixels using color
histogram approach in the uncompressed media. An attempt is made
for the retrieval of color video. The simulation is performed for the
abrupt change in video which yields 90% recall and precision value.
Abstract: One of the approaches enabling people with amputated
limbs to establish some sort of interface with the real world includes
the utilization of the myoelectric signal (MES) from the remaining
muscles of those limbs. The MES can be used as a control input to a
multifunction prosthetic device. In this control scheme, known as the
myoelectric control, a pattern recognition approach is usually utilized
to discriminate between the MES signals that belong to different
classes of the forearm movements. Since the MES is recorded using
multiple channels, the feature vector size can become very large. In
order to reduce the computational cost and enhance the generalization
capability of the classifier, a dimensionality reduction method is
needed to identify an informative yet moderate size feature set. This
paper proposes a new fuzzy version of the well known Fisher-s
Linear Discriminant Analysis (LDA) feature projection technique.
Furthermore, based on the fact that certain muscles might contribute
more to the discrimination process, a novel feature weighting scheme
is also presented by employing Particle Swarm Optimization (PSO)
for estimating the weight of each feature. The new method, called
PSOFLDA, is tested on real MES datasets and compared with other
techniques to prove its superiority.